Wireless Audio/Video
Pavillion s5-1114: is this unit capable of wireless audio/video to a Philips 32PFL4907 smart TV? If so, what hardware/software do I need @ pc side & @ TV side?
Hi,
Can you use it to connect to your home network ? If yes then not it fault, must be the TV.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
Audio/video out of sync (audio delay) with PowerBeats wireless earphones.
I am having a problem with audio/video sync between my PowerBeats Wireless earphones with my MacPro and MacBookPro. I have tried pairing, playing the video, pausing the video, turning off the PowerBeats, tuning the PowerBeats on, then starting the video playback again. I have the same audio delay so this not working for me. Anyone have an update as to how to fix this audio/video sync problem?
I am playing MPEG-4 movie files. I did open MPlayerX from my dock, then pulled down File to select Open which then did show the folder where these movie files are stored. Then I was able to select a movie file, open it, and use "Decrease Audio Delay" to closely sync the audio with the video. I say closely because it is not perfect. Rather than stepping each increase or decrease in one tenth of a second, perhaps a finer adjustment would have been in milliseconds. This is the adjustment that I have with my AVR to sync the audio with the video, so I know this is a possible increment adjustment. The perfect adjustment was in between -0.4 and -0.5 second,however, this was not possible in one tenth second adjustments. The closest adjustment was with -0.4 second rather than with -0.5 second. So, adjustments in milliseconds could have been very near a perfect sync. Perhaps later versions of MPlayer will offer the adjustment selection in milliseconds. Nevertheless, this is working much, much better than before. Thank you so much. I have spent most of this day researching this problem and you have come up with by far the best solution. This problem goes all the way back to 2010 and possibly beyond for Apple products. There are hundreds of reports documenting out of sync audio/video issues with no solution that works as well as MPlayerX. Even the Beats support staff have no idea of how to resolve the audio/video out of sync.
-
Audio & video don't match on burned blu-ray
Thanks to everyone on this forum, I was able to solve the blue screen of death issue!
Now a new problem: I successfully burned a blue ray. The menus work well and the picture is great, but the audio is about 20 seconds ahead of the video on all tracks. This problem only occurs on the finished blu-ray disc. In preview, the audio and video match perfectly.
I am using Encore version 6.0.1.13
Does anyone have this issue?
Here are my blu-ray drive and system details:
Here are the blu-ray drive specs:
Logitec USB 2.0/3.0 Bus powered portable bluray drive unit, LBD-PME6U3VBK
PIONEER BD-RW BDR-TD05 USB Device
Driver: 6.1.7601.17514
C:\windows\system32\DRIVERS\cdrom.sys
\windows\system32\Drivers\PXHlpa64.sys
\windows\system32\DRIVERS\tdcmdpst.sys
\windows\SysWOW64\drivers\Afc.sys
Renesas USB 3.0 driver also installed
The computer specs are as follows:
Manufacturer: Toshiba
Manufacturer Part Number: PSAY1U-05U027
Product Line: Satellite
Product Series: P755
Product Model: P755-S5375
Product Name: Satellite P755-S5375 Notebook
Product Type: Notebook
Processor Manufacturer: Intel
Processor Type: Core i7
Processor Model: i7-2670QM
Processor Speed: 2.20 GHz
Processor Core: Quad-core (4 Core)
Cache: 6 MB
Chipset Manufacturer: Intel
Chipset Model: HM65 Express
Standard Memory: 4 GB
Memory Technology: DDR3 SDRAM
Memory Standard: DDR3-1333/PC3-10600
Number of Total Memory Slots: 2
Hard Drive Capacity: 500 GB
Screen Size: 15.6"
Display Screen Type: Active Matrix TFT Color LCD
Aspect Ratio: 16:9
Screen Mode: WXGA
Backlight Technology: LED
Screen Resolution: 1366 x 768
Graphics Controller Manufacturer: Intel
Graphics Controller Model: HD 3000
Graphics Memory Capacity: 1.65 GB
Graphics Memory Accessibility: Shared
Ethernet Technology: Fast Ethernet
Wi-Fi: Yes
Wi-Fi Standard: IEEE 802.11b/g/n
Webcam: Yes
Operating System: Genuine Windows 7 Home Premium with SP1
Operating System Architecture: 64-bit
Pointing Device Type: TouchPad
Number of Cells: 6-cell
Battery Chemistry: Lithium Ion (Li-Ion)
Width: 15.0"
Depth: 9.8"
Weight (Approximate): 5.40 lb
Package Contents:
Satellite P755-S5375 Notebook
Lithium Ion Battery
AC Adapter
Green Compliant: Yes
Green Compliance Certificate/Authority: RoHS
Installed programs:
Name Version
Microsoft Application Error Reporting 12.0.6015.5000
Microsoft Office Click-to-Run 2010 14.0.4763.1000
Microsoft Office 2010 14.0.4763.1000
Windows Live Essentials 15.4.3502.0922
Apple Application Support 2.1.7
Windows Live Writer 15.4.3502.0922
Microsoft_VC90_MFCLOC_x86 1.00.0000
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148 9.0.30729.4148
TOSHIBA Web Camera Application 2.0.3.3
Windows Live Messenger 15.4.3538.0513
Microsoft_VC90_CRT_x86 1.00.0000
Google Toolbar for Internet Explorer 1.0.0
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219 10.0.40219
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.61000
Microsoft SQL Server 2005 Compact Edition [ENU] 3.1.0000
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219 10.0.40219
Toshiba Online Backup 2.0.0.31
TOSHIBA ReelTime 1.7.21.64
Windows Live Remote Client Resources 15.4.5722.2
Windows Live SOXE Definitions 15.4.3502.0922
Adobe AIR 3.1.0.4880
Windows Live Mesh ActiveX Control for Remote Connections 15.4.5722.2
Windows Live Communications Platform 15.4.3502.0922
Windows Live Movie Maker 15.4.3502.0922
Apple Software Update 2.1.3.127
Windows Live UX Platform Language Pack 15.4.3508.1109
Windows Live Photo Gallery 15.4.3502.0922
bl 1.0.0
Windows Live Mail 15.4.3502.0922
Java(TM) 6 Update 25 6.0.250
MSVCRT_amd64 15.4.2862.0708
TOSHIBA Face Recognition 3.1.17.64
ph 1.0.0
Adobe Widget Browser 2.0.348
Windows Live Writer 15.4.3502.0922
Mesh Runtime 15.4.5722.2
TOSHIBA Supervisor Password 1.63.51.2C
Adobe Acrobat X Pro - English, Fran軋is, Deutsch 10.1.1
Adobe Reader X MUI 10.0.0
TOSHIBA Media Controller Plug-in 1.0.7.5
Windows Live Photo Gallery 15.4.3502.0922
Windows Live Photo Common 15.4.3502.0922
Label@Once 1.0 1.0
PDF Settings CS6 11.0
Toshiba Book Place 2.2.7530
Windows Live PIMT Platform 15.4.3508.1109
TOSHIBA Wireless LAN Indicator 1.0.5
D3DX10 15.4.2368.0902
Utility Common Driver 1.0.52.3C
Junk Mail filter update 15.4.3502.0922
Windows Live Movie Maker 15.4.3502.0922
TOSHIBA HDD/SSD Alert 3.1.64.9
Windows Live Remote Service 15.4.5722.2
Toshiba App Place 1.0.6.3
Windows Live Mesh 15.4.3502.0922
Windows Live Language Selector 15.4.3538.0513
QuickTime 7.72.80.56
Renesas Electronics USB 3.0 Host Controller Driver 2.0.34.0
TOSHIBA Value Added Package 1.6.1.64
Microsoft_VC80_CRT_x86 8.0.50727.4053
Google Update Helper 1.3.21.111
TOSHIBA HDD Protection 2.2.2.15
7-Zip 9.20 (x64 edition) 9.20.00.0
TOSHIBA PC Health Monitor 1.7.9.64
Windows Live Mail 15.4.3502.0922
Adobe Help Manager 4.0.244
MSVCRT 15.4.2862.0708
Windows Live Remote Client 15.4.5722.2
Blackmagic ATEM Switchers 3.0.1.0
Microsoft_VC90_MFC_x86 1.00.0000
Windows Live Photo Common 15.4.3502.0922
Windows Live ID Sign-in Assistant 7.250.4232.0
Microsoft Visual C++ 2005 Redistributable 8.0.61001
Windows Live Messenger 15.4.3538.0513
Windows Live Mesh 15.4.3502.0922
Windows Live Writer 15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17 9.0.30729
TOSHIBA Hardware Setup 1.63.1.37C
Microsoft Silverlight 4.0.50401.0
PlayReady PC Runtime x86 1.3.0
Intel(R) WiDi 2.1.41.0
Windows Live MIME IFilter 15.4.3502.0922
TOSHIBA Flash Cards Support Utility 1.63.0.12C
TOSHIBA eco Utility 1.3.5.64
Windows Live UX Platform 15.4.3502.0922
TOSHIBA Wireless Display Monitor 1.0.1
Debugging Tools for Windows (x64) 6.12.2.633
Windows Live Remote Service Resources 15.4.5722.2
Windows Live Writer Resources 15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17 9.0.30729
Intel(R) PROSet/Wireless WiFi Software 14.01.1000
Windows Live Installer 15.4.3502.0922
TOSHIBA Disc Creator 2.1.0.11 for x64
PlayReady PC Runtime amd64 1.3.0
Windows Live SOXE 15.4.3502.0922
Java Auto Updater 2.0.4.1
TOSHIBA Bulletin Board 1.6.08.64Well, I am at the limit of being able to help, since I only write to DVD
But, if your video is showing as being untranscoded, I would agree that "something" is going wrong while transcoding
If you click on the 622722 link I provided, you "should" be able to figure out how to export out of Premiere Pro to create a file that Encore does not need to transcode
Otherwise, you'll have to wait for someone who uses assets like yours to create a BluRay to come along and, hopefully, point out what you need to change
These may not help, but they are a couple of links I saved about audio/video sync problems
Fix for audio out of Sync on Export http://forums.adobe.com/thread/955524
-and http://forums.adobe.com/thread/436751?tstart=120 -
Firewire speeds and audio/video with Apple TV
Hello,
I hope someone can give me some advice regarding 400 vs 800 Firewire connections.
After picking up an Apple TV about 8 months back, I have decided to consolidate all the audio/video content on my wife's and my Macbooks.
Looking at grabbing a Mac mini and connecting a large hard disk via Firewire to that to store everything. I don't plan on connecting the Mac mini to the TV...will continue to use the Apple TV unit for that. However, while some some of the content will sync between the Apple TV unit and external hard disk connected to the Mac mini, I figure there will still be a good portion that would be shared/streamed off the external disk as it is viewed or listened to.
I currently have an Airport Extreme network, and I am able to share/stream video and audio from my Macbook to the Apple TV and it works great. My question is, when I add the Mac mini and start streaming/sharing off the external hard disk attached to it, will there be a difference in performance if the drive is connected via 400 Firewire vs an 800 Firewire?
I figure the wireless transfer between the Mac mini and the Apple TV would be the limiting factor, but felt it prudent to at least check if the Firewire connection would have an effect.
If not, then I plan on picking up a cheap, used older model Mac mini with the 400 Firewire port to save some cash. The machine doesn't need to do anything more than stay powered on with the iTunes app running and sending files back and forth to the Apple TV.
Thanks in advance!+I figure the wireless transfer between the Mac mini and the Apple TV would be the limiting factor, but felt it prudent to at least check if the Firewire connection would have an effect.+
+If not, then I plan on picking up a cheap, used older model Mac mini with the 400 Firewire port to save some cash.+
No doubt the wireless transfer is the weakest link in the chain. Firewire 800 is substantially faster than 400, so you would gain some future-proofing by going with it. And the 2009 Minis come with Wifi-N, while the older models come with G/B.
A used Mini will usually lack the Apple warranty.
Minis are so handy that you have to ask yourself, why is someone getting rid of it? My somewhat cynical answer is that many Minis being sold on the used market are being gotten rid of because of some lurking problem issue that the owner hasn't been able to resolve.
If you must buy an older model, consider an Apple refurbished Mini, which comes with full warranty and current software. -
Is there a good USB audio/video grabber for a Macbook?
I need to be able to take screenshots from my Xbox 360. My PC friends use a USB audio/video grabber that the hook up to their TVs, however, there aren't that many for Mac. I was hopping someone here knows of a good product that is compatible with Macs. I have an early 2009 unibody Macbook. Thanks for your help.
I'm confused.
Doesn't your mini already have a wireless card? It's part of the standard config, so I don't understand why you're not using that.
I've yet to find a workable USB wireless ethernet device. I'm sure they exist but I've yet to encounter one. -
Netflix Audio/Video Out of Sync
My new AppleTV arrived today (yay!) and I quickly set-up and configured it. While generally impressed I'm observing that the audio and video for Netflix streaming are not synching up properly. I've got the ATV hardwired to my network and am not connecting via wireless.
I have both the HDMI and optical cables plugged in I've tried audio over both interfaces and with the ATV setting for "Digital Out" set to on and off and all variations have the same synch issue.
I've tested the same show with the Netflix app on my iPhone (over wifi) and using the OSX Silverlight player (hardwired) which both synch the audio/video properly.
Anyone else experiencing this? Did you find a solution?I haven't seen any audio sync issues but I would like to drop a suggestion for those affected by this. I believe most televisions now now have a setting to compensate for this. (Well at least I know my Vizio 37" does.) My television has a setting (unique for each input) called lip sync and it's for correcting exactly this issue. Initially it's a feature for correcting out of sync problems between the television and satellite receivers which is actually a common problem. Most modern televisions should have a similar feature for fixing audio sync features. Doesn't hurt to dive into your televisions settings to see if you can correct your audio sync issue.
-
Streaming audio/video issues
When I attempt to play video (Hulu, YouTube, Netflix) or audio, my IPhone 5c goes into this continuous buffer mode. How can I get audio/ video to stream again?
You are joking right? establish an ethernet connection?
We try not to joke on the forums. If you are using 802.11n 5 GHz, that might do it if the Blu-Ray player and Time Capsule have close to a line-of-sight relationship. If 5 GHz won't do what you want, that tells you that the connection has insufficient bandwidth to provide the connection quality that you need.
If you are using regular "n" wireless at 2.4 GHz, ethernet will have about 8 times the bandwidth capability than wireless. Using 5 GHz, ethernet will have 3 times the bandwidth of wireless.
You may not want to consider ethernet, but it's hard to argue with physics. I've tried to stream high definition sources over a very good wireless network, but have not found a way to do this and obtain the performance that I want. But, perhaps another user has found the answer and will post to tell us about his workaround. I will be watching this thread. -
Wireless audio besides iTunes?
Is there a way to get my airport to play audio to the speakers connected to the airport from quicktime or the dvd player? how about other media players like Real and Window's. some hack perhaps....
I've tried using VLC in combo with Airfoil to play DVDs and EyeTV programs with little success. I can get the wireless audio and video in sync for a time but they do not stay in sync. It seems that, in the case of DVD playback, chapter changes cause a slight "mis-alignment" that grows worse over time. IMO, it is not worth the hassle. Better to stick with wired connections.
-
How can I display & split the audio & video from the same digitized clip?
I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
Am I asking too much of this software?
BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
Thanks in advance for any help...Jordon,
"Am I asking too much of this software?"
No, you're not.
You first want to select your clip(s) and choose Advanced>Extract Audio.
This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
You can now edit and move the audio independently of the video.
With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
Matt -
IDVD 08 audio/video sync drift toward end of DVD movie - fix/workaround?
Anyone know how I can fix this issue? It's driving me crazy.
I've just spent a few evenings in iMovie 08, editing together the video of my son's birth. All looked & amazingly good in iMovie. The "Large" .m4v file output by iMovie - Shared with the Media Browser - plays perfectly in Quicktime too.
However, after adding that shared movie to iDVD 08, and burning a DVD, I noticed that the audio sync drifts toward the end of the Movie when plated back. At the start of the DVD all seems well, but by the end of the ~1hr 20 minute movie the audio is unbearably out of sync with the video. Completely unwatchable.
After a little Googling I came across some reports that iDVD might not deal well with video that's been recorded with 12-bit audio. I've confirmed that my camcorder is (was!) set to 12-bit rather than 16-bit (the default, I'm sure). So if that's the problem I'm hosed... it's not like I can get a retake on that footage
Is there a reasonable workaround for this issue? I'm obviously unable to re-take the video (or the other 10 hours of DV video tape I've yet to use in an iMovie project). Ideally I'd like Apple to release a patch for this. Shouldn't it be possible for iDVD to account for audio that was originally recorded in 12-bit... even if it's just a checkbox you have to select to tip it off?
Then again, perhaps this is totally unrelated to the 12-bit issue, and this is just a run of the mill bug?
As I said... iMovie generates a MPEG4 video file of the Movie that looks/sounds perfect, so it seems this sync issue's being created somewhere in iDVD as it's rendering the audio/video to burn to the DVD...
Thanks in advance.I've tried most of the options I can think of, and the audio sync drift issue continues on this ~1hr 12 minute iMovie/iDVD 08 project.
A couple of promising ideas tried used QT Pro, to export the audio track from the iMovie generated MPEG-4 file - as a WAV file, resampling to 48kHz and 16-bit... then Adding this back to the video track in the MPEG-4 file (having deleted the original audio track). In another test I also tried the Add to Selection and Scale option. Oddly enough I think the Add to Selection and Scale attempt generated more sync issues than before in the final DVD movie... so I stuck with the MPEG-4 file containing the video track and the added, resampled at 48kHz & 16 bit, WAV audio track.
This was saved as a self contained Movie file, producing a QT .mov file. I moved this .mov file into the iDVD projects directory structure so that it was avalable in iDVD's Media Browser. I then reworked the iDVD project to use this QT large.mov file, instead of the original iMovie large.m4v file.
As a reminder... the original large.m4v file has the following properties:
29.97 FPS H.264 Decoder, 960 x 540, Millions
AAC, Stereo (L R), 44.100 kHz
0:01:12:07.16 duration
The resampled and saved QT MOV file has the following properties:
29.97 FPS H.264 Decoder, 960 x 540, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
0:01:12:07.16 duration
BOTH versions of this Movie file play flawlessly within QT Pro... there's no audio sync drift evident toward the end of the movie unless I use iDVD 08 to burn either movie file to a Physical DVD (or DVD Disk Image). In both cases the resultant DVD Movie exhibits significant audio sync drift as the ~1hr 12 minute movie progresses. The sync goes out by ~ <= 1 second based on a rough visual assessment.
I've not yet tried to burn either the original iMovie produced MPEG-4 video file or my QT Pro tweaked audio track .MOV file version to a DVD on my PC...
... But I have used an application called Burn (referenced in this earlier/archived iDVD sync drift forum post: http://discussions.apple.com/thread.jspa?threadID=1332100 by user F Shippey - http://burn-osx.sourceforge.net/) to take the QT Pro tweaked .mov file version of the original MPEG-4 file and burn it to a DVD...
Results:
The Burn app burnt DVD plays with NO audio sync issues!... Even though it was generated from the same audio tweaked (48kHz/16-bit resampled) QT Pro .mov file.
However, whenever I burn a DVD using iDVD 08 the audio sync gradually drifts. It matters not whether I use the original iMovie 08 generated MPEG-4 movie file, or the QT Pro version of that file with the resampled audio track (the same one that works fine with Burn).
It sure looks to me like iDVD has a problem... Again, refer to http://discussions.apple.com/thread.jspa?threadID=1332100 for someone else who seems to have run into similar challenges.
Am I overlooking something?
Thanks in advance. -
How do I connect an iPhone 5S or 6 with audio video cables?
How do I connect an iPhone 5S or 6 with audio video cables? Our van only has these connections. Apple did have a cable that worked with the 4/4S, but it does not work with an adapter on the 5S. I want audio only.
I Thought I probably was.
something like this should work then, right?
Belkin Y Audio Cable (12 foot) https://www.amazon.com/dp/B000067RBT/ref=cm_sw_r_awd_fYWzub11XY5MQ
OR
eForCity 3.5mm to RCA Auxiliary Cable Cord for iPod/MP3 https://www.amazon.com/dp/B0042DIZTE/ref=cm_sw_r_awd_R0Wzub1X33PD9
thx SO much ) -
Audio / video sync issue in playback
for every recording i've made, when i play back the archive there is noticable lack of sync between the audio and the person's mouth. the video seems to lag behind by almost a second. the good news at least is that the delta is constant.
has anyone else experienced this? it's happening in any scendario i try, even if i'm just recording myself.
is the LCCS dev team aware of this? since audio and video streams are recorded separately, is there any way for me to programatically 'nudge' the streams into sync?
it's currently a show stopper, it looks really bad when the sync is so obviously absent.finally getting back to this..
i did as you suggested and recorded a video of myself using the recording and playback examples provided with the SDK (the 2.2 newest version btw).
the de-syncing of audio and video is definitely there. it seems especially bad for longer recordings. however, an interesting thing i discovered in playback:
- sometimes, if i drag the playhead somewhere in the recording, pause, and then hit play, video and audio fall into sync.
- if i start playback from the beginning of the recording, audio/video is always out of sync.
i understand that the video and audio streams are recorded separately and thus played back separately. my guess is that when those streams are retrieved and playback begins, one starts before/after the other because they're not retrieved at exactly the same time. it seems some extra work is required to ensure that their playback commences at exactly the same timestamp within each stream.
i can provide my recordings as an example if required.
this is a total showstopper for me. it renders the entire recording service useless if the playback can't have sync between audio and video. i would be happy to help with testing this more. can someone from the LCCS team comment on this issue?
thanks
adam -
I am using Parabola (a fork of archlinux), Icecat 31.4 and ALSA
Icecat and firefox seem to hold onto the soundcard when I click on a new html5 audio/video link in the same tab. The next video/audio element loses sound. If I wait 10 seconds and click back to the start of the audio/video, the audio returns. I often get cpu spikes for icecat when it happens.
I have tried this with both motherboard and usb sound and I get the same problem. I have disabled extensions (addons) in Icecat, deleted profiles, reinstalled the browser and even installed firefox from the AUR and it still occurs.
I have disable gstreamer in about:config and restarted and it still occurs.
My .asoundrc is this:
pcm.!default {
type plug
slave.pcm "hw:0,0"
All my other audio applications work. I have noticed that if I use pulseaudio it fixes it, but it should work without anyway, like it used to. I think something happened after an update, but I'm not sure.
Any help would be appreciated. I know it's not a big problem, but it's really frustrating and I've had it for ages. I even switched browsers to get away from it.*nerding out*
I am not an expert in this and if we get stuck I have found a mailing list for the alsa project that can be contacted: http://www.alsa-project.org/main/index.php/Mailing-lists
Gstreamer is disabled in Firefox as well as the os?
Since you are seeing issues with ogg files and moving video/audio combination I started to dig into file formats {sox http://sox.sourceforge.net/soxformat.html}
For ogg would the file format affect the "raw"?
defaults.pcm.file_format "raw"
Updated libraries
alsa-lib-1.0.6-8.FC3
alsa-utils-1.0.6-3
No no, here:
http://oss.sgi.com/LDP/LDP/linuxcookbook/html/cookbook_27.html#SEC377
Is the OGG cpu intensive for your alsa architecture? [http://alsa.opensrc.org/Ogg]
Troubleshooting sound on Linux to narrow down the issue: [http://www.troubleshooters.com/linux/sound/sound_troubleshooting.htm#the_steve_litt_diagnostic_tools]
References: [http://www.alsa-project.org/main/index.php/Minivosc]
[http://www.troubleshooters.com/linux/sound/sound_troubleshooting.htm#the_steve_litt_diagnostic_tools]
I am sorry, this is where I can no longer help. Please seek the guidance of the Linux forums or that alsa mailing list. -
Please help me. When I connect my iPad 2 to my t.v via hdmi with my audio video adapter, nothing shows up on my t.v. I have an L.G HDTV. When I connect it to my HDTV it just says no signal. And nothing shows on my t.v. Please help me.
Settings-video-tv signal set to proper format?
Turn tv off, connect the adapter, make sure iPad on and ready, turn tv on.
More than one hdmi port? Try switching ports. -
Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.
I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...
Maybe you are looking for
-
Setting up IP,Subnet, default gateway and secondary gateway in solaris 10 x
Hi, I am new to solaris. I have instralled solaris10 x86 on my system. I am not able to access internet as i am not able to setup address. I use broadband and have static ip address. How do i configure them... ip, subnet, default gateway, and seconda
-
Restoring in Lion, using Time Machine saved in Snow
I just replaced my HD and am in the process of reinstalling numerous items. I now have Lion, but prior to replacing the HD, I had Snow. I simply imported my vcard into address book, but it combined all the groups. I must have them separated, and ther
-
WEBVPN and Windows Terminal Services
Does anyone have a copy of a config to set up WEBVPN with Windows Terminal Services? I have opened port 3389, but something does not seem to be working correctly.
-
First Imac in the post. What size hard disk for Time Machine
I have a 500GB hard disk in my new imac (Which I dont have yet) What size drive should I get to backup my system.
-
Iphone 3gs won't update to ios 6 in iTunes 7
I'm trying to updatemy iPhone 3gs using iTunes 7. But, I'm told that my version of 4.2.1 is the latest. I thought that the iPhone 3gs could take iOS 6? Any thoughts? Ideas? Thanks all!