Wireless-B BEFW11S4 "wireless B" LED light...

I'm trying to set up a wireless router with my DSL but I'm having a problem.  I followed the directions (plugged the cord from the modem into the internet slot on the router and the other cord from an internet port on the router to the computer) but the wireless B led light doesn not come on.  I tried pressing the reset button and yes, I did hold it down for over 30 seconds. Nothing happens. How do I fix this so I can get online using my wireless?

are u able to go online with the hardwired connections ??? if so , get into the router using http://192.168.1.1 , go to the wireless section and ensure that wireless is "enabled"....or else the wireless part may be dead.

Similar Messages

  • Bcm4313 led light

    Hi guys, l have got an Acer Aspire One Happy 2 netbook. I have installed x86_64 version on it and everything is running fine, apart from trying to get the Broadcom wireless network led light to work.
    There is other posts with different wireless cards and in they .conf file they put "options ipw2200 led=1". (Eg: Intel pro-wireless)
    But where is the conf file for the Brcmsmac driver.
    any ideas
    Cheers

    Sometimes it is necessary to do a hard reset to erase all of the information in the temporary memory and regain functionality of your PC when it stops responding. For example, doing a hard reset is helpful if your keyboard quits responding, you cannot get your PC to come out of hibernation or sleep mode, or if a software program causes the PC to freeze.
    The hard reset will not delete saved files on the hard drive.
    Performing a hard reset
    To perform a hard reset, follow the steps below.
    1-Unplug the AC adapter from the notebook PC and remove from any port replicator or docking station.
    2-Remove the battery from the notebook battery compartment.
    3-Press and hold down the power button for about 20 seconds.
    NOTE: Holding down the power button while the computer is turned off drains any residual charge in the capacitors.
    4-Insert the battery and plug the AC adapter back into the notebook PC.
    5-Press the power button to turn the notebook PC back on.
    Signature:
    I currently work on behalf of HP for numerous support departments. The opinions expressed above are the personal opinions of myself, not of HP. There is no guarantee that the opinions expressed are 100% correct.

  • Wireless keyboard ERRATIC LED light

    I use an Apple wireless keyboard which sits about 12 inches from the iMac. The green LED light in the caps lock key behaves erratically. Sometimes the caps key is on but the light is off, some times the caps key is on and the light on. I have try re-parring the keyboard with the computer but the problem persists. I took the keyboard to the genius bar. The genius tested the keyboard with a laptop and worked fine. Has anyone had this issue? is there a fix to this issue?

    Hey, i came on here to see if anyone had the same problem i have just started having with my wireless apple keyboard. It turns out that the caps lock LED wont light up anymore but the keyboard still works how it should. Ill post back if it starts to have the same symptoms as your keyboard. How is yours now, have you resolved the issue?

  • Wireless Lan Led Indicator Not Lighting Up

    Hi All,
    I've recently purchased a Lenovo S10-3 Model 20039 and I 've noticed that the wireless lan led indicator is not lighting up even as I am connected to the internet. Is this a driver issue or a faulty led light? I have tried updating, installing and uninstalling the wireless lan driver but its stiil the same. Its a minor issue really because i can still connect to the internet even if the led indicator is not lighting up. It just makes me feel uneasy because its a new machine...if there is anybody here who can help me solve this conflct, it will be very much appreciated. Thank you very much in advance
    Solved!
    Go to Solution.

    Hi the latest  BIOS 37 for S10-3  , but that didnt help for a broken bulb
    sincerely KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • WRT54GS WLAN LED light flickering with no wireless activity

    I have a WRT54GS router. It is password protected. Even though I don't have anything connected wirelessly to it, sometimes the WLAN LED light flickers. Is there anything wrong? I checked the outgoing logs and I only see one I.P. address.
    Message Edited by fadsunite on 02-11-2009 09:09 PM
    Message Edited by fadsunite on 02-11-2009 09:27 PM

    Thanks, I was worried that someone had managed to figure out my password and was accessing my router/internet connection illegally.

  • SORRY WRT150N Wireless LED light not on

    I purchased my WRT150N router almost 3 months ago and the first couple of times that I used it the wireless light and connectivity was fine but then I stopped using it for a while and now the wirless light will not come on and my laptop will not get a signal.  I have tried many things and there is no wirless connection.  I have a wireless adapter but it is not getting a signal.  Any help on what I can do to get the wireless led light on and get connection????  I really need help.

    have you tried powering the switch on or off? and still no light? have you already restarted you computer?

  • G62-454ca won't turn on.power led and wireless network led keeps blinking every 3-4 seconds

    Please help.when I try to turn on nothing happens.Only power LED and wireless network led keeps blinking every 4 seconds

    According to the message you have recently posted I would like to confirm that this is a hardware issue and I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer
    You can also Check your warranty Here to verify the warranty status
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • DV6000 DC IN Jack lights up, Wireless shows orange light but no power! Help!

    DV6000 DC IN Jack lights up, Wireless shows orange light but no power! Help!
    I connect the AC adapter to the laptop and the blue light on the DC IN jack lights up, also the Wireless Card light shows up in orange color.
    No battery indicator, no power indicator would light.
    Can this fixed by just replacing the DC in USB Sub-board or what needs to be replaced?
    I have seen in ebay repair services for these known issues.

    yet looking in system diagnostics confirms that the
    adapter is connected, but not charging.
    Sorry, not system diagnostics, system
    profiler.
    PowerBook G4
      Mac OS X (10.4.3)  
    yet looking in system diagnostics confirms that the
    adapter is connected, but not charging.
    Sorry, not system diagnostics, system
    profiler.
    PowerBook G4
      Mac OS X (10.4.3)  
    Must be something magnetic in the ionsphere: mine has had the same symptoms. I was going to buy a new battery, but now maybe not. I think on mine the pmu module can be replace seperate from the logicboard? I was thinker perhaps the internal battery??? Really open to answers.

  • How can I disable the wireless status LED (T61)?

    When I'm working on my laptop and listening to, for example, online radio the wireless status led under the screen keeps blinking (data is being transmitted). I find this extremely annoying and distracting. Is there any way to disable the LED? (but obviously I would still need to be connected). I'm using windows xp on a thinkpad T61.
    Help much appreciated!

    i would use a black permanent marker or something, or a black sticker. This is the easiest and safest way of doing it, it is perfectly reversable. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • BB 9320 - Screen goes black, LED light off and device unresponsi​ve for a 3-30 seconds, then repeats

    Hi there, 
    I got a BB 9320, then replaced it through the vendor for this same issue but it is still occuring. 
    When using my phone, fully charged or not, the screen will go black and LED light is off for a 3-30 seconds mid task and the device becomes completely unresponsive. It will eventually come back, and restart the task (ie, if i'm typing a txt messge, it will be back to the message inbox, or for an email back to my email inbox, etc.). It's really frustrating because at times it will continually happen for so long that I give up on using my bb entirely. 
    I have tried restarting the device to factory settings, removing the battery, keeping it continually charged, draining the battery entirely. 
    What is happening? How can I fix this??

    Hey makader,
    Welcome to the BlackBerry® Support Community Forums.
    I would suggest doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test before restoring any data to the device.
    If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
    How to use BlackBerry® Desktop Software to restore data to a BlackBerry® smartphone from a backup file
    http://btsc.webapps.blackberry.com/btsc/KB10339.
    If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
    Thank you
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • T420 Wifi Led light not turned on

    I have a lenovo t420, and I notice that my WiFI led light on the bottom of the LCD panel is not lighted when i have my wireless on... My bluetooth led light works fine. I tried to switch both my Lenovo Access Connection and the switch button but nothing works? any idea ?

    Maybe this will help.  Page 96 or so, maybe other pages as well.
    Hardware Maintenance Manual - ThinkPad T420 and T420i
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • FN+F11 turns volume on/off, but LED light remains red

    Pressing the function key FN+F11 switches volume on/off, BUT the LED light is always on and red.
    Pressing the function key FN+F12 switches wireless on/off, AND the LED light switches red/white accordingly.
    Any suggestions for a fix?  Alternatively is there a trick to disable the lights altogether?

    @DunkinDoughnuts
    Hi,
    Please write your notebook product number (p/n), which system are you using and country of purchase.
    Resource:
    How to Locate the Notebook product number (p/n)
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Iphone 6 plus led light not working in 8.3

    I updated to 8.3 a few days ago and have just noticed that my led light does not work.
    I backed up the phone, reset it to factory settings and it's still not working. Ay ideas on what I can do next?

    Nore wrote:
    I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
    Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
    I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1.  I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
    Are you a developer?  IF so try asking in the developer forum.

  • Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

    Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

    I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

  • MSI X48C PLATINUM TURBO CARD LED LIGHTS

    Hi All
     I have MSI x48c platinum it's working fine but DIMM Turbo card led lights is still off
     Please tell me how to on Turbo card lights. 
     Sorry for my English

    The turbo cards will never light. Only special turbo cards for presentations will light. The turbo card by your motherboard have no LED´s mounted.

Maybe you are looking for