Wireless Bridge error with AIR-BR1310G-E-K9,cannot associate: No response

Hi Guys,
I have to do a wireless bridge with 2 AIR-BR1310G-E-K9. I configure 1 AP root bridge and 1 AP non-root bridge, with the same SSID.
But on the AP non-root bridge, the interface dot11 radio don't change it state to up and give this error: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: No Response.
I don't why it doesn't work. Even if i try a configuration which it already work on a site, it doesn't work to.
So I ask to me if there is a problem with internal antenna?
If I configure the 2 AP to access point role with 2 different ssid, I can see the 2 ssid but with a weak signal.
This AP can work without external antennas?
Thanks for your help

Hi Jerome,
The 1310 definitely can work with the internal antenna but... is the AP mounted somewhere? Some mounting options imply an external antenna as they position the internal antenna toward the wall...

Similar Messages

HT5022 10.8.4 is throwing an error with this software: "Airport Utility cannot be installed on this disk. The version of Mac OS X on this volume is not supported"

10.8.4 is throwing an error with this software: "Airport Utility cannot be installed on this disk. The version of Mac OS X on this volume is not supported"

You are trying to install a version of Airport Utility earlier than 6.0, correct? If so see the following: Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.

Code Signing Error with AIR.app on MAC OS

Hi,
I have an application that runs on Windows and MAC. The last release of the application was signed in February of this year without any issues on both of the target patforms. Now, when signing the latest release on MAC I am getting an error.
code object is not signed at all
In subcomponent: Path to application /Contents/Frameworks/Adobe AIR.framework
I am using a DigiCert extended validation token to sign the code.
I relaize this is pretty obscure, but will appreciate any ideas on how to solve this issue.
Best,
C.S.

This is a pretty narrow little niche but hopefully what I've discovered will help someone out...
When signing and air application in which the runtime is embedded, you must sign the Adobe Air executable first.
To do this right-click or control click on the app, e.g. appName.app and choose show package contents. Find the Adobe Air executable in "Contents/Frameworks/Adobe Air.framework. Right-click or control-click the Adobe Air shortcut and coose show original. Right-click or control-click on the Adobe Air exe and select Get info. From the pop-up window copy the path, and use it in the terminal with codesign -s appending a "/Adobe Air" to the end. Once it's signed you can sign the app without an error.
One more thing... Your application won't open on a MAC without a warning and the need to overide the default security settings unless you register as a developer with apple.
I did this and used a MAC certificate to sign Adobe Air and the application.
WHAT FUN!

Would a wireless bridge work with the Home Hub 5?

Hi there. I am wondering if I might avail myself of the community's advice and wisdom. I'm due to have Infinity 2 installed in a week or two, but I have a few concerns about how to get things working properly. Mainly I am wondering how on earth to connect my PC to it, when they won't be on the same floor in the house. The worrying over this almost has me rethinking the wisdom of changing from my old ISP of twelve years.
The Home Hub 5 will be installed downstairs at the master socket (or whatever that thing is called), but the family PC (currently wired to a Netgear DGT2200 'N' modem/router) is upstairs. I can't run wires all over the house (so sayeth the wife) so I am a bit stuck thinking of a solution that is workable. My neighbour had his Master Socket moved (I think) to solve a similar issue, but I'd prefer not to (if the engineers would even offer that) as access to the socket for the study is really restricted by several very full and rather rickety bookshelves.
I was thinking of using a wireless 802.11ac bridge, like the Linksys WUMC710, so I can connect a PC, Xbox360, SkyHD box and Blu player to the network whilst not having to use 4 separate adapters. However that bridge is single band only, (frankly I can't find a dual band AC bridge). Would the 5ghz signal from the Home Hub 5 be strong enough upstairs, bearing in mind it has to go up one floor and through one (admittedly paper thin) wall (the study is nearly directly above where the hub would be positioned)? It would rather defeat the object of switching to FTTC if the only room with a decent connection is the one where I only use ipads, another SkyHD box and very occasionally a laptop. The PC is arguably the one device that I want/need a good connection for work/play.

I'd hoped I was done with wondering what to do on this, but more reading has confused me even further.
1. If I did ask the engineer (likely a contractor I gather) to have the master socket moved upstairs (and he agreed to do it), is it true that the current telephone extension sockets would not longer work unless rewired? Not a deal breaker as I only use one of them for the master unit for my cordless phones.
2. If the engineer either refused to move the Master Socket or I opted not to ask due to the extension socket issue, am I correct in thinking I can pay something like £130 for a BT Engineer to come out to specifically move the Master Socket and rewire the extension sockets? The difference in cost between that and buying good powerline extenders and a switch is not that much (especially if I'd lose less connection speed by doing that). Actually I think a friend of my father's is a BT engineer...I should probably be asking him this.

Upsetting error with Air required app zipped

Hello. I've installed your Air on my PC and the Air is right.
Once, I've attempted an "Insta(-gram) viewer (privately) 1.0" http://youtu.be/w1R0vbThvXw which requires your Air.
However, when I've clicked his .exe and he's been always saying that .exe has been damaged.
I've comment the video on these and no responds yet.
Plz link the video to download and attempt him to discover the problem where is, the .exe or my PC or more. Thanks!
Windows 7 ultimate SP1 on Samsung NP350U2A-A03HK
Activated product ID: 00426-OEM-8992662-00015
S/N: HM7E91VC100019H

You are asking in the wrong place. Please see the notice at http://forums.adobe.com/community/robohelp/airhelp

Wireless printing errors with Pages

Appleworks documents print fine using an airport extreme base station but Pages documents leave 90% of the document unprinted. Is this a known software problem or do I have an individual problem ?

Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://www.ifelix.co.uk/tech/1300.html
Using the Gimp-Print drivers for the PhotoSmart P1100.
iFelix

Wireless Bridging SA520

I currently have 2 buildings that are connected using wireless bridging between a AIR-AP1310 and a Cisco1800 with an HWIC-AP module. I would like to bring a 3 building into the picture which has line of site to the AP1310. I would like to use the SA520, so I get the firewall and VPN features. Can the SA520 be set up in Bridge mode to connect to a AP1310? If not can any of the small business AP units connect in this fashion? I know I can use a AP1240 Series unit.

i think it seems to work after i have change the ap1220b (ios) to operate as WGB.
anyway, thanks for the suggestion. i dont think i can upgrade as,
a> those ap are loan equipment
b> neither do i have any cco account to obtain the software (requires some image software, if i have not mis-read the upgrade guide)

Wireless bridging w AP1220Bs

hi,
is wireless bridging possible with 2 units of AP1220Bs (one on IOS, the other on VxWorks)?
as i am getting the following errors:
<ap.ios# show logs> [set to non root bridge]
Mar 1 00:00:18.590: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associa
te: no wpa-v1 v2 chk needed
*Mar 1 00:00:40.590: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associa
te: Rcvd response from xxxx.xxxx.xxxx channel 1 2858
*Mar 1 00:14:07.589: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associa
te: Associating
ap#
<ap.vxworks# logs> [set to root ap]
Station aabbccddeeff Failed Association, status "Can Not Support All Requested Capabilities"
any ideas?

i think it seems to work after i have change the ap1220b (ios) to operate as WGB.
anyway, thanks for the suggestion. i dont think i can upgrade as,
a> those ap are loan equipment
b> neither do i have any cco account to obtain the software (requires some image software, if i have not mis-read the upgrade guide)

Error with Loading Device Software on 8700 AT&T phone.

Hi. I would like some help with my 8700 AT&T refurb blackberry phone. When I tried to download the device software (v4.5) to my already downloaded DTM (v4.6), it gave me an error message I did not know what to do with.
I want to synch my organizer data (calendar, contacts) from older desktop (Outlook 2002) to my new laptop (Outlook 2007, Windows 7). I am having trouble downloading the supporting device software. I keep getting an error message that reads "Error with the Application Loader. Cannot update software using this system as device is currently activated on a blackberry Enterprise Server or professional software. Contact administrator or check with service provider." I do not use Enterprise. I don't have an internet service plan for my phone as I use it only for calendar and contacts. AT&T gives the software option for AT&T 8700 in English device software as v4.1.0.175 as the only option that is supported by my current platform (2.0.0.90). Is this right?
All I really want to update my phone with the latest software that supports Outlook 2007 on my new laptop. What do I need to make that happen?
Thanks in advance.

Hi there!
Refurbs can be problematic. If a BB was ever activated on BES, then it has an IT Policy. IT Policies are not removed by the standard WIPE actions. Rather, they take additional steps to clean off the Policy.
Just to check, please go to this screen:
Homescreen > Options > Security Options > (Information) or (General Settings) or (something similar)
On that screen will be some selection boxes plus other sections (divided by horizontal lines). If, on that screen, there is any discussion about IT Policy (even if it says "Default"), then you indeed have an IT Policy on your BB. (The screen may also have a section for "Services").
If you don't have an IT Policy, then something else is going on...in which case, stop here and report back exactly what you found on that screen.
If you do have an IT Policy, then, in my view, you have two choices.
1) Since this refurb was provided to you by ATT, they did not deliver to you a "clean" device. You could take it back to them and have them clean the IT Policy off.
2) You can remove the Policy yourself. The process is 100% destructive to the data on the BB, so you'll want to be sure you've already taken a good full backup. Then use Method 3 in this KB.
As for what device OS to install, you have more choices than you indicated. See this page:
https://www.blackberry.com/Downloads/browseSoftware.do;jsessionid=0A15EC28AEC181D3F3F9C5235D9F166A.n...
Select, from the drop-down, your model (8700). The resulting screen shows that ATT is currently supporting 4.5.0.182 (MultiLanguage) for your BB model. The MultiLanguage pack will include English, so you don't have to fall all the way back to the English only version. So, you have choices. The best advice is to use the most recent version -- bug fixes, enhancements, and all of that.
What I advise, since you want to use Outlook 2007, is to use that 4.5.0.182 package for your BB and the most recent RIM desktop package (5.0.1.28). That way, you will have full compatibility for what you are looking for.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

1602 AP - Workgroup Bridge Cannot Associate to Parent AP

Hi All,
For a few weeks now, I have been trying to connect a Cisco 1602 standalone AP to our unified wireless network as a workgroup bridge. Eventually this AP is to be moved to another wireless network where I will need it to run in universal workgroup bridge mode (for non Cisco wireless networks), so I just want to get this working in the office before I take it elsewhere and try to get that to work, as the configuration will be similar.
So far I've been unable to get this 1602 AP to associate to our network. The particular SSID I'm trying to set up is a BYO style SSID, normally if you connect a device you provide your Active Directory username / password and your laptop / phone / whatever connects. I know the username is fine because if I use it on another device it's not a problem.
The AP keeps repeating this message: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Associating. Cisco.com tells me that this is to do with MFP, however I've changed a number of MFP settings in the SSID and this seems to have made no difference.
I'm thinking this is a problem with authentication or association. I have a question, why do I need to input Radius server information into the config (eap_methods)? When you connect a regular device to this SSID it doesn't require any Radius server settings in order to connect, I don't understand why the AP needs these settings. Also, when authenticating to AD, do you need to include the domain name as part of the username?
Wireless isn't my strong point unfortunately. Is anyone able to help with this? Config and log is below. Many thanks.
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname WGB-AP
logging buffered 10000
logging rate-limit console 9
enable secret 5 xxxx
aaa new-model
aaa user profile userprofilename
aaa group server radius rad_eap
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
no ip routing
no ip cef
dot11 syslog
dot11 ssid BYO
authentication open eap eap_methods
authentication shared eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa version 2
dot1x credentials MyCreds
dot1x eap profile EAPTLS
infrastructure-ssid
ids mfp client optional
eap profile EAPTLS
method mschapv2
method peap
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-88743315
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-88743315
revocation-check none
rsakeypair TP-self-signed-88743315
crypto pki trustpoint WGB-PEAP
enrollment terminal
subject-name CN=username
revocation-check none
rsakeypair manual-keys 1024
crypto pki certificate chain TP-self-signed-88743315
certificate self-signed 01
30820227 30820190 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
2F312D30 2B060355 04031324 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 38383734 33333135 301E170D 39333033 30313030 30383234
5A170D32 30303130 31303030 3030305A 302F312D 302B0603 55040313 24494F53
2D53656C 662D5369 676E6564 2D436572 74696669 63617465 2D383837 34333331
3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281 8100BB10
F5361E52 A573FE8A 247142AD CF53D762 38F7BB42 7E723B2B 5C78100E 7F312442
3BE63A8B 7E826758 3F2914D0 4BBC93A6 CCACA795 927514E7 74561589 444D03BA
C20B80D8 85E52A18 C3B287BF 4A1EEF83 B43DD673 12BF075F 7CA038C0 C31F1FB4
F75C3F86 C09DC703 FB05676B 16B86754 F0F11D4D 36B61F81 DF15C02A 9C410203
010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603 551D2304
18301680 14999B3B 7F4B10FA B95CC90B D7218636 39280AFE 4E301D06 03551D0E
04160414 999B3B7F 4B10FAB9 5CC90BD7 21863639 280AFE4E 300D0609 2A864886
F70D0101 05050003 81810076 27E215C4 C105C66D 15124645 D3F4A538 F977A95F
7AF0FF05 648D41A4 A796F9CB CC6327FF 726DA1D6 290CD438 C2111DF8 208B92B5
63B09FEC 1CA334F7 A4607E71 18EBCB44 0A175BEE 30689849 B4D9222E 7EB1C1DB
F36BDDD3 3F5514A6 8A006A8A A113A44D 7337B6D8 7860AA25 EBAD5588 8543DF88
9E6A3D62 6E875372 277B57
quit
crypto pki certificate chain WGB-PEAP
dot1x credentials MyCreds
username DOMAIN\AD-USER
password AD Password
username Cisco password 7 00271A150754
username DOMAIN\AD-USER
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid BYO
antenna gain 0
stbc
beamform ofdm
station-role workgroup-bridge
bridge-group 1
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
encryption mode ciphers aes-ccm tkip
ssid BYO
antenna gain 0
no dfs band block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
interface BVI1
no ip address
no ip route-cache
ip forward-protocol nd
no ip http server
ip http authentication local
ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius-server host xxxx auth-port 1812 key 7 xxxx
radius-server vsa send accounting
bridge 1 route ip
line con 0
logging synchronous
line vty 0 4
transport input all
end
Jan 5 14:34:30.636: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Associating
Jan 5 14:36:23.730: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Associating
Jan 5 14:36:42.730: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Associating
Jan 5 14:38:19.833: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Associating
Jan 5 14:39:33.901: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Associating
Jan 5 14:40:49.948: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Associating
Jan 5 14:42:10.123: %SYS-5-CONFIG_I: Configured from console by console
Jan 5 14:42:42.031: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: No Response
Jan 5 14:42:46.031: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Associating
Jan 5 14:43:06.058: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Associating
Jan 5 14:45:18.173: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Associating

With PEAP there is a certificate being used on the radius server for securing the first phase (outer tunnel). In this scenario the access-point acts like a dot1x client, so like any other client it has to validate the certificate the radius server uses. Therefor the root certificate (and intermediates, if being used) needs to be installed on the access-point.
I never configured an WGB in this way, so I fired on my lab to see if I could get it to work. Sadly I did not manage to get it to work properly, I'm running into "EAP session timed out" messages in ACS (my radius server). I did also ran into the MFP issue, but as long as you configure MFP as optional on the network side, it should work. Because of the CCIE exam, I'm running old AirOS software on the WLC and also the software on the access-point I tested this configuration on (2600) is not that new. So it could be that I ran into a bug testing this, so I would advise you to run the latest software on your 1600. There are WGB related bugs fixed not so long ago. This configuration is supported since IOS 15.2.2(JA) and higher.
If I look at your configuration you still need to actually install the certificate, the trustpoint is empty. Besides that the following configuration changes needs to be made:
eap profile EAPTLS
no method mschapv2
method peap
dot11 ssid BYO
authentication open eap PEAP
   no authentication shared eap eap_methods
authentication network-eap PEAP
authentication key-management wpa version 2
dot1x credentials MyCreds
dot1x eap profile EAPTLS
   no infrastructure-ssid
   no ids mfp client optional
For more information look at this document.

Cannot Associate 1532 Bridges in Non-Root role

Hello,
Can someone please tell me what I am missing and why I cannot bring up 2 bridges in "Root" and "Non-Root" roles?
I have similarly configured bridges in a Root / Non-Root role several times before with older AP's and never had any issues... although it was always just 1 SSID, 1 Vlan, and no subinterfaces...
The only way I was able to get these 2 bridges to associate was to put the Non-Root bridge into a Workgroup Bridge role and then *BANG* everything worked perfectly. I tried getting rid of the authentication and tried using the Parent command but neither helped. Prior to entering Station Role Workgroup Bridge, the only message I would receive was showing on the Non-Root side and all it said was:
*Mar 1 07:27:13.867 GMT: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: No Response
*Mar 1 07:27:28.891 GMT: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Rcvd response from 544a.0005.8030 channel 3 2815
What am I missing or what have I incorrectly configured on my Non-Root config?
Bridges are both 1532i with the Autonomous Image 15.2(4)JB5
Attached are the configs prior to changing the Non-Root AP to a station role of Workgroup Bridge.
Thanks!

Hi,
This should work with multiple sub-interfaces.
Few more suggestions
1. Remove this from your BRIDGE SSID & check
mobility network-id 1
This is only require when you configure L3 roaming & WDS in place.
http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1200-series/8103-ap-faq.html
2. Try to set WPA version 2 & only AES encryption.
Also try to Associate your Bridges using Open Auth first (as shown in my blog post initial section) & then try to add security.
HTH
Rasika
**** Pls rate all useful responses ****

HT201272 You can download past purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 88 days.

What is going on with my apple ID. I only have one, the iMac is only associated with this ID, yet i get this message after evry thing i try to download from the store......You can download past purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 88 days.

Hello BW1968,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days.
Best of luck,
Mario

WPB54G Wireless Bridge "Communication Error"

I was tasked with getting a WPB54G Wireless Bridge up and running. The included setup software seems to work just fine under Windows XP, but whenever I try to run it in Vista I get a "Communication Error, connection lost" message. I've tried running it in admin mode, adding an exception to the firewall, and connecting the bridge in various ways, but this error always comes up.
This is a problem, because my boss is heading away on business next week, and his laptop runs Vista. (I would have installed XP, but Toshiba made it a nightmare to try and install XP on it.) He needs this wireless bridge in order to get his VoIP running in the hotel he'll be staying at, and if he can't get it running, he's going to be fairly displeased.

I've just got this same error on vista and 7 with setup wizard v 2.0 and a (BSOD on XP sp2) Any fix for it yet?
Message Edited by tburke0 on 01-29-2010 05:47 PM

Setting up a netgear n300 as wireless bridge/access point with airport extremee

I just replaced my netgear wireless router with the airport to allow our many devices on the network without knocking each other off and also increase the speed. But would like to use the netgear as a wireless bridge or access point so that I can still connect my NTFS formatted hard drive to be shared on the network. Any suggestions would be appreciated. I can not seem to find my netgear router with 192.168.1.1 as that comes up with another device. I have tried doing this with a windows laptop in another room but can not seem to make it work. I am now hooked up directly to the airport thinking i need to do it that way and still no luck. Please help.

As long as you intend to do this over ethernet it will work.. you cannot easily wireless repeat or bridge to an apple router.. you would need specific hardware to do it.
What is the exact model of netgear you have?
The setup method depends on the functionality of the router.. but lets assume it does not have a bridge or WAP mode.
You use WAN bypass.
1. Setup the Netgear with IP address in the correct IP range for the rest of the network.. it is hard to talk generalities so lets say the apple is main router and your network is now 10.0.1.x .. then set the Netgear to 10.0.1.250 (apple uses IP 2-200 by default) you can use any value you like outside the DHCP range. Up to the limit which is 254 as long as you keep track of all static IP devices. Apply this setting and power cycle the router.. and you might need to power cycle the computer as well to pick up the new IP.
2. Turn off the DHCP server in the Netgear. You may lose connection to the netgear now.. do not worry about it.. (this can be combined with one.. if you firstly turn off dhcp before you change the IP.. but whatever is possible.. at some point you will need to change around and if you forget what IP .. you will be in a mess.. so write it on a label and stick on the base of the router.. also without dhcp you will either need to reset router to factory using reset button or use static ip on the computer. )
3. Plug ethernet from LAN of the main router to LAN of the Netgear. Reboot the whole network is often necessary.
4. In your computer plugged somewhere in the network.. open browser and go to the address you set.. 10.0.1.250 in my example.
5. You can then setup the Netgear to do whatever you like.. DIsk access is fine.. wireless is fine.. it just cannot be a router.
Many many reboots if you get lost. Hit reset and start over.

Need Help With Wireless Bridging

Hello all, I have recently perchased high speed WiFi for my house so I could do some gaming on my Xbox. Problem is my roommate, who is a tech support professional, set the modem up in his bedroom, my Xbox is old and requires a wireless adapter to pick up signals but since the modem is so far away from it it barely recieves the signal. So currently I'm paying for nothing so I confronted him about this issue and he attempted to fix it by wirelessly bridging a router to the modem but after a month he hasn't succeeded and has given up so now it's up to me and I have no clue where to even begin. The modem we have is a Cisco DPC3825 and the router is a NetGear Wireless-N Router WVR2000 V2. Any help would be greatly appreciated.

Denver: I did not actually understand what kind of bridging you want to do?
The modem already has a wireless transmitter. I think you mean the router is picking up the wireless signal and provide the xbox with connectivity via wired cable. is that right?
If correct, It looks like the issue is with the distance/barriers between your modem and router. You need to try to eliminate some barriers in between to get better signl. Try also to put the devices as close as possible to each other.
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

Wireless Bridge error with AIR-BR1310G-E-K9,cannot associate: No response

Similar Messages

Maybe you are looking for