Wireless button linking but have plug in USB

 I have a problem with the Wireless light blinking but I want to use the USB port..
The Wireless light won't go off so I can use the USB and I need to do a lot of printing.
This question was solved.
View Solution.

Download the user guide here.
http://support.hp.com/us-en/product/hp-deskjet-3050-all-in-one-printer-series-j610/4066450/manuals
In here you will find your wireless info. The wireless light blinking can be ignored since you do not want wireless. Follow the full instructions on USB connection. Do not insert the USB cable until told to do so. You will also find all software and drivers on this site.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • Thank you Texas Mac Man for suggested links but have already tried all those.  It is a contstant filling up of storage daily.  Restart ipad mini and then OK for the day. Something, some app or ? is filling up it up or at least it thinks it is filled up.

    I have no music and no video (tried deleting all) very few apps.  16GB ipad Mini fills itself up (storage full message by end of each day) with adding nothing.  Just checked again, no music no video and my two biggest APPS FB and Kindle just over 100MB each a few other smaller APPS is all that is on it.  Tried the restore and back up. Same prob.  The same problem is happening with my 32GB iTouch. (Exact same problem)...my wife's ipad and son's mini are not having the issue.  If I restart computer it frees up tons of storage and if I check says 13 GB free.  If I check in about and hour maybe 7GB free etc until full and now won't let you even check websites.  I have cleared data from apps tried deleting just about everything, tried restore...don't know what else to do.  Since so many posts are out there with same mysterious storage filling up hoping a fix would be coming. Could it possibly be a common App or?  If I do plug into computer and sync with iTunes (depending on what time of day) it will show entire device full (yellow bar) "Other"....if I just restarted then plugged in OK and shows 13GB free. Any ideas?  WIll keep holding on and restarting a couple times a day so I can use it...thanks

    I remember this conversation from your earlier thread (iy makes more sense to stay on the same thread than to start a new one.
    Since it is happening to both your devices, but now your wife and son's, it is likely associated with one of your apps, which are on both devices.  delete them all, and add back one by one until you find the culprit.
    This could also be by having i cloud tied up in an endless attempt to sync stuff across the two devices.  I remember earlier posts about the contact syncing getting stuck between 2 address books that did not agree, and it could not rectify which was the master and which is the slave.
    So turn off the cloud, and see if the behavior stops.  If it does, turn on the services one by one to figure out what is causing it.

  • HT5312 i haveforfoten my security questionds, i set up a second email acc and have hi the link to retreve them but have not receved an email

    i have forgoten my security questions. i have set up a second email acc and hit the link but have not receved an email

    If you've clicked the 'send reset info' link as described in step 5 on that page and you haven't received the email (how long ago was it and you've checked the spam folder as well as the inbox ?) then you could try clicking it again. If that doesn't arrive within the next couple of hours or so either then you could try contacting iTunes Support or Apple to get them reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57

  • Equium P200-1IR - Wireless is connected but cannot access the internet

    Hi ya,
    Need a little help!!
    I have just bought an Equium P200-1IR.
    I have turned the wi fi on.
    I can see my router which is Talk Talk.
    I can get the laptop to connect to the router and it says that I am connected,
    however I cannot access the internet.
    I tried the same process by inserting a wi fi dongle into the USB port
    on the laptop and exactly the same happens.
    We have other computers in the house that connect to the router and internet
    ok using the wireless dongle.
    I have plugged a hard wire connection from the laptop to the router and I can
    access the internet immediately with no problems, however would love
    to use the wireless feature.
    Any help really appreciated....Thanks
    Waynec

    Do you use the right channel and right encryption settings?
    This should be checked!
    It should be able to change the WLan channels in device manager -> WLan card -> Properties -> Advanced tab
    But I would also recommend disabling the encryption and password in router settings and to connect to Open Wlan of course this should be done only for testing purposes if the notebook would be able to connect to the open router, then this would mean that you used a wrong password.
    How about WLan driver update? Did you update the WLan driver? If not do that!

  • My iPhone will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings. I have no back up of my phone I've also tried the home/sleep button thing but nothing

    My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone

    That does happen.  It depends on how hard the server is being hit, as well as the connection speed of your system.  If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

  • I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    Are you connecting your iPhone directly to your PC or to a USB hub?

  • My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

    My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

    My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

  • I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work

    I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work... Please help me and quick

    You need to check out the User Guide here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • I have Java set up as a plug in but cann't get into yahoo games. Where is the firefox button when I have the browser open? Only button I see gives me close, resize,

    I have java installed and properly working as a plug in. Why can I not get into Yahoo games and play Card Games? Where is the firefox button when I have the browser open? Only button that looks like anything for firefox allows me to restore, move, size, minimize, maximize, and close. That button is top left hand corner location.

    I recently purchased a second hand new macbook air, although it was second hand to me the previous owner had never actually turned it on.
    Something doesn't make sense here, though I'm not saying the previous owner is lying....
    Time to send your serial # to iTS and let them see what's happening here.
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

    I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings?  I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

    1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
    As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
    2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
    You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
    ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
    3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
    Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

  • I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network.  I select Extend Wireless network but have no success. Ideas?

    I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal.  The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available.  I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play.   I got the plug, but no play.  I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status.  I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times.  Then wait 45 seconds and the default settings will return.  I did all that, only to find out that after the initial flash of green, green never appeared again.  I got a fast flashing yellow light, followed by the light going off.  Apparently this didn't reset it properly.  So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
    highFly376

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • My iPad will not charge, it can sync to iTunes and transfer data/music to it, but when plugged in to a USB or an A/C wall adapter all it says is not charging.

    My iPad will not charge, it can sync to iTunes and transfer data/music to it, but when plugged in to a USB or an A/C wall adapter all it says is not charging.

    A lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.
    In terms of the wall charger, have you tried a different charger and/or cable, or do you know anybody else with an iPad so that you can try their charger and cable and they can try yours ?
    Have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • TS3276 An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

    An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

    For anyone else reading this thread, it is worth knowing that sometimes an email is, or can be, corrupted thereby jamming the works. The solution above is good, but I just wanted to suggest another one.
    If the problem arises, go to an online mail access service, such as Mail2Web.com and login to you mail account there and delete the offending message.
    Problem solved.
    And George, as this is all entirely voluntary, whinging about no takers may not endear people to you. Besides which, a few minutes of searching on Google would have found you a number of solutions.

  • How do I get rid of the iCloud Backup alert message?  I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset.  Thanks

    How do I get rid of the iCloud Backup alert message?  I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset.  Thanks

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • TS1398 I have BThomehub2 - 2xf9 wireless broadband. I have switched wi-fi on my ipod touch but when i enter the password to join this network it stays locked and wont let me join. all other devices working ok. what do i do?

    I am connected to the internet via a BThomehub2 - wireless broadband. I have wi fi switched on on the ipod but when i put in the password for the home hub i get unable to join network? what do i do?

    - Reset the iPod. Nothing is lost.
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings.
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Does the iPod successfully connect to other networks?
    - Use the communities search box in the upper right and search for:bthome
    Other users have has similar problems with tBThome routers.

Maybe you are looking for