Wireless card does not support N

Hello,
I just bought a Lenovo 4233-72G, N500 ( 3000)
The spec is here:
http://www5.pc.ibm.com/europe/products.nsf/$wwwPartNumLookup/_NS772xx?open&OpenDocument&epi=web_express
According to the spec, the wireless card should hace been Intel WiFi Link 5100AGN;
however, when I got it, and open the device manager on wireless network card, I saw that it is a broadcoam 802.11g.
How could it be ?
Rgs,
Kevin

Your laptop should have the Intel 5100 wireless card. You should contact Lenovo and have them correct the replace the card with the proper one. The worldwide support center phone list is here.
\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

Similar Messages

Installed graphics card does not support the opengl features recommended

I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
and http://www.apple.com/finalcutstudio/download/):
* A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
* 1GB of RAM
* An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
* A display with 1024-by-768 resolution or higher
* Mac OS X v10.4.11 or later
* QuickTime 7.3 or later
* DVD drive for installation
I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
Thanks in advance for any helpful advice you may have.

The minimum would probably be an nVidia Fx5200 or an ATI 9600...
Patrick

Wireless Card does not work in Windows 8.1 for G585

I just wanted to inform someone that the wireless network card does not work in Windows 8.1 Preview. I suspect the driver needs to be updated. When I go to the Device Manager it appears as a Realtek device RTL8192DE instead of a Qualcomm device that does not start. I tried installing the latest driver from the website but it makes the computer crash (BSOD) when trying to reboot after the installation which makes the Windows 8 automatic recovery turn on and I had to restore the system to a previous state before the driver installation.
For now, I just refreshed my system back to Windows 8, instead of trying to use Windows 8.1 Preview . If you have any suggestions, it would be great, otherwise I'll wait for a driver update.

neilwar wrote:
Oh goody. Just updated to 8.1 and it doesn't work. Looks like everyone else is having the same problem. Why no answer from Lenovo?
Please refer to the dedicated thread on "Blue" 8.1.
Thread locked
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Why the graphic card does not support directv2 pc?

I have HP Envy 15 early 2012 3033cl, OS Windows 7 home premium 64 bit. I just downloaded the direct tv app to watch my recorded programs but is not working. I have the AMD HD 7690 M graphic card, and intel's other card I don't know what model that one is. When I use Intel's card I get audio and a green screen. When I use the AMD card I get a message "DIRECTV2PC cannot play this video because your graghic card does not currently support screen capture protection for protected content. Try updating your graphic card driver or modify your driver settings."

Ipod touch supports bluetooth for stereo headsets/speakers and some peer to peer apps from the app store.
Why is not a question that can be answered here.
Only Apple would know.

I have iphone 3gs , i restored my iphone and now i cant activate it , and the sim card does not supported

i have restored my iphone 3gs but couldn't activate it , and the sim card is not supported , any body can help me pls. ?

Then you will have too look for help on other site we can't help you.
This is the site where you need too got for help for jail broken phones
http://forums.macrumors.com/forumdisplay.php?f=105
That's may be why your phone is not working then has it been jail broken
Sorry but I can no longer help you on this your own your own

Satellite Pro 4600 Wireless card does not work with WIN2K ?

I have a Satellite Pro 4600 with UK dealer installed PA3070U-1MPC wireless card running with Windows 2000
The wireless client manager finds the network of my wireless router and reports the signal is excellent and I see all green bars swhowing.
However I can't mske a connection, in 'connections' the wireless one says 'network cable is disconnected'
the router works ok with other laptops in my house.
I have latest version of Win2K also have downloaded and installed latest versions of client manager and WLAN card driver for win2k from toshiba website.
The 'toshiba support in Turkey' told me 'I need a different driver for Win2K for my wireless card cause the win2K driver on the toshiba website is not for 'this' wireless card'. I have waited for this for 3 weeks now and have been unable to reach the elusive UK Level 3 support who supposedly have this driver. I have seen on the internet the same wireless card is has been sold as a 'made by toshiba' accessory and it says it is compatible with Wim2K
What do I do next please ? Does this run at all with Win2K , is there 'another driver' and so on ?
Thanks

hello
please be more scpecific - what do you mean by 'disconnect the LAN' - I have nothing conneced there anyway ? do you mean 'disable' the LAN even though there is nothing plugged in ? can you please post the exact sequence of this so I can try ir too.
In the meantime my laptop has been to Toshiba for them to sort out at their highest level UK support base. I was hoping my troubles would be over - but no, read below what happened. They are basically saying my win2k is not in order but I had just installed and updated it so right now I haven't a clue what to do next.
START QUOTE of Toshiba Support response:
Sat Pro 4600
Serial No: 31474181G
Windows 2000 SP4 (customers build not recovery CD)
BIOS V1.80 not current therefore updated to V2.60
The notebooks wireless card is functional and has the correct driver installed, it also has the correct and latest version of the Wireless Client Manager. The wireless function appears to see the router but will not connect and obtain an IP address. Irrespective of the settings applied within Internet Explorer or the Wireless client manager you cannot obtain a connection. The customer did not have any Toshiba utilities installed such as, Power Saver, Common Modules, Chipset drivers, network device switch, I therefore installed these missing components and updated the BIOS to the most current revision. However despite this the unit will still not connect to the wireless.
I therefore removed the customers HDD and replaced his HDD with a Toshiba loan HDD with a fresh build that I had created. When using the machine with this build the wireless connected without issue and I was able to browse the internet etc. I placed the customers HDD into our machine and the problem with the wireless was replicated on our machine here, therefore the problem is not with the wireless card or any hardware aspect of the machine, the problem lies with the customer's build of Win 2000. I examined for anything obvious but could not find anything, therefore I'm sending this machine back to customer with the advice that his build needs addressing or he needs to reload Win 2000 his machine.
As you can see from the above comments, the machine performs as per specification with loan HDD and fresh build of Win 2000 installed, the problem is only present with you HDD and build in the machine. In addition to this I have replaced the missing screws on the base of the machine ensuring the machine is structure is maintained.
5 x B16 Screws
1 x B6 Screw
1 x Memory Cover Screw
END QUOTE

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

RTL8192SEvB wireless card does not find wireless networks

Hello everybody,
After some updates in Arch I noticed my wireless RTL8192SEvB left to locate wireless networks. Has anyone experienced the same problem or know how to remedy it?
Note:
- My Arch installation is already with systemd;
- The card driver is installed correctly, so I used it normally before this "crash";
- The system recognizes the card as active and behaves normally (as if it worked) - lspci and co. OK;
- I use KDE and Network Manager as a GUI.
Already very grateful.

WonderWoofy wrote:The rtl8192* driven cards tend to be pretty shoddy at best. I have seen reports of these "se" cards working fine with one kernel and not at all with the next. You may want to experiment with previous kernels to see if it changes things.
Thanks WonderWoofy, but it does not work.
I tried, without success.
What I find interesting is that for the system, everything is normal with RTL8192SEvB.

My wireless card does not work after re installing windows 8 !!

I suppose my card manufacturer is realtek and my card driver is gemtek my network adapter driver I've downloaded and installed it my nothing happens. In my device manager there is no wireless card please help me!!!!!!
My system says no wireless card detected my PC was dos based and when I installed windows 7 everything just went fine. After some days it was formatted and again I installed windows 7 ultimate but my wifi adapter and card was not in the device manager. Please help me!!

my pc is lenovo c320 aio
intel g630, 2gb ram, dvd r/w, realtek gbe ethernet controller, usb 2.0x5 ports, keyboard and mouse

Satellite Pro L10: sound card does not support Windows 7

Hi
i have a Satellite Pro L10 so i installed a Windows 7 on my system but my laptop can not support Windows 7.
I need update of sound card for Windows 7.
The model of sound car is Conexant CX20468-31 AC97 Audio Sound Card.
Please help me

Hi buddy
What to say first of all you will not get official drivers for this notebook for Win 7 or Vista.
This notebook is oldie and I doubt the drivers will be released.
Reading through this forum threads Ive noticed that most of the user use the Vista driver on Win 7 OS.
Maybe you should google for the Conexant AC97 Vista driver and should try a Vista driver on Win 7
Good luck

Move Images to SD Card does not support PlayMemories

I love the integration of my a6000 and PlayMemories app to transfer and share photos, however there are two severe limitations that I hope Sony can resolve soon with software update.
1. PlayMemories App cannot transfer to SD Card at least on Xperia ZR 4.4.4. I belive this app should be built-in if possible to allow it to write to SD card like other Sony apps.
2. This leads to quickly filling up internal memory with high resolution photos from camera. This wouldn't be a problem if the automatic Move Images and Videos to SD Card feature works, but it does not detect PlayMemories images and videos, so complains internal memory low but shows zero images to transfer.
I hope Sony either Xperia or PlayMemories team fixes these issues soon, because the integration of the different Sony products is one reasons I chose the a6000 over Olympus EMD-10 camera.

Can't believe this feature is not standard, sending images from an RX100 m3 to Xperia Z3 and internal memory is full, why did I bother with a 128gb Sd card? Ridiculous...

"LBZ needs a shaders, your gfx card does not support shaders."?

Hello guys,
I'd like to taste Lemmingball Z on my laptop but obviously my graphic card seems not to be ready for it. I installed the normal xf86-video-intel driver for my GMA 3100.
Whats wrong?

Do you know how to fix that?
Version date: Sun Nov 9 16:14:02 CET 2008
can't gzopen tmp/updatorOutput.xml.gz
Suspicious responce, canceling update!
Added "lbz data directory". 945 new, 0 overwritten, 945 total, 0 errors.
Added "patch data". 5 new, 0 overwritten, 950 total, 0 errors.
Testing network-relevant game files...
Game tested: LibCRC 9138EB27(13) GameCRC 60F470D8(628)
Compiling all LGS scripts:..........OK
Attempting to detect joysticks: 1 detected.
Detected joystick Microsoft Wired Keyboard 600
Setting OpenGL window: 1024x768
Setting up opengl....
Writing out hardware info to 'hardware.txt'
OpenGL version: 1.4 (2.1.2 NVIDIA 295.49)
OpenGL vendor: NVIDIA Corporation
OpenGL renderer: GeForce 9400 GT/PCIe/SSE2
Texture units: 4
Maximum texture size: 8192, windowsize: 1024
Texture compression enabled.
Your hardware looks ok to me! :)
Last edited by japenagosc (2012-05-12 18:19:46)

The Currently Installed Sound Card Does Not Support Direct Sound Input

I'm working Pro 1.5 in Win 7 with CPU: i7, 12 gb ram.
The computer is a Costco ZT System
http://www.costco.com/Browse/Product.aspx?Prodid=11500733&whse=BC&Ne=5000001+4000000&eCat= BC|84|56671&N=4017755%204294908621&Mo=8&No=1&Nr=P_CatalogName:BC&Ns=P_Price|1||P_SignDesc1 &lang=en-US&Sp=C&topnav=
No "extra" sound card installed as described by ZT System the audio:
Flexible 8-channel capable audio with jack sensing
The speakers are working, as in Dictionary.com and .mp3 play perfectly, but there is not sound coming from the rendered program, nor from any audio files. The audio monitor is showing sound, but that's it.
I'm pretty sure all the *.csv, *.cfa or whatever the audio files associated with PP (project) have been deleted, but, I don't see the program doing the "audio" compilation thing.
Can someone help please? Sure hope it's not a 1,5/Win thing.
Regards, Jon

Jon,
First thing that I would do would be to install the latest Realtek drivers. You will need to go to the Realtek site to get these.
Next, in PrPro, there is an Edit>Preferences>Audio Hardware setting page, with the additional ASIO Settings (at least in PrPro 2.0 and above). There you can set how PrPro handles audio. If you still have issues, I strongly recommend ASIO4ALL. It is freeware, and easy to install. Once installed, one goes to the settings pages above and choose ASIO4ALL for everything. This little driver has worked so well for people with lower-end sound hardware, up to true esoteric hardware, at the very upper-end of the spectrum. I cannot count the number of music editing professionals, who have been helped by this little free driver. I use it on my Creative Live DD 5.1 SS card, and it works perfectly.
Good luck,
Hunt

32BV502B Does not support MPEG-4 in Greece?

Hi to all,
I bought a Toshiba 32BV502B model when I was in London.
I red some reviews before I buy it and I saw that this model supports MPEG 4.
While in London it used to play all the local tv stations. I send this TV to Greece and it doesn't support the local tv stations. There's a "video format is not supported" screen message or something like this.
I downloaded the latest version of the Tv's firmware but still nothing changes.
Do you know if there is any other way to fix this problem.
I would like to avoid an mpeg4 codec with extra devices, remotes etc.
Thanks

No I don't think that all channels in Greece are HD. They are both Digital and Digital HD. For example I have a friend who uses the Neotion NP4+ CAM CI card and channels are fine but an HD channel won't show anything because the CAM CI card does not support HD.
As for the signal, the strength at the info when I swap channels is full in every channel and I can listen to the sound clearly. My TV shows some 5 out of 40 digital channels probably because they are broadcasting MPEG2 signal.
The relevant advertisement 3 years ago when the analogue signal was about to change to digital says that you only need a set top box that supports mpeg4. So probably my TV has not a MPEG4 codec as mistakenly Argos suggests. http://answers.argos.co.uk/answers/1493-en_gb/product/5298965/questions.htm
Do you know if the built-in tuner is like plug and play chip so I can swap with one from another toshiba?
It's a pitty because the TV is relatively new (1 year) and one of my criteria was MPEG4. I am about to complain to argos. ;)

Caution, nVIDIA Quadro FX cards may not support DirextX 11

Anyone thinking or acquiring any of these cards be careful if DirectX 11 is something you will need in the future.
During September when researching the Quadro FX cards one of my criteria was that it supports DirectX 11.
At that time their latest driver version indicated it does support DirectX 11. Only recently when running a program that requires it did I find out the card does not support DirectX 11 !
So now I've got to look at something else to replace this card. Anyone here want it?
Not so cheerful,
Michael

The card in question is the Quadro FX 3800.
However, my colleague has the Quadro FX 4800 and will run into the same problem.
Regarding running the DirectX update from Microsoft, the answer is yes I did.
The NVIDA Customer Care representative's response was as follows (I really wish one could copy and paste this):
"I apologize for the inconvenience. I must add though that the 259.81 Driver Package is generic to a lot of devices. The idea behind this is to streamline the process of driver packaging. Whilst the 259.81 drivers support DX 11 it requires a card to support DX 11 to work successfully."
Checking NVIDIA's product lineup this means only the 5000 series and up support DirectX 11.
What disturbes me, that there is no mention in the driver's web site description indicating this card is excluded. To the contrary it is listed as being included!
As well the fact that this "customer care" representative alludes to my incompitence in not checking the specifications...
Cheers
Michael

Wireless card does not support N

Similar Messages

Maybe you are looking for