Wireless Card does not work in Windows 8.1 for G585

I just wanted to inform someone that the wireless network card does not work in Windows 8.1 Preview. I suspect the driver needs to be updated. When I go to the Device Manager it appears as a Realtek device RTL8192DE instead of a Qualcomm device that does not start. I tried installing the latest driver from the website but it makes the computer crash (BSOD) when trying to reboot after the installation which makes the Windows 8 automatic recovery turn on and I had to restore the system to a previous state before the driver installation.
For now, I just refreshed my system back to Windows 8, instead of trying to use Windows 8.1 Preview . If you have any suggestions, it would be great, otherwise I'll wait for a driver update.

neilwar wrote:
Oh goody. Just updated to 8.1 and it doesn't work. Looks like everyone else is having the same problem. Why no answer from Lenovo?
Please refer to the dedicated thread on "Blue" 8.1.
Thread locked
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Similar Messages

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

Wireless mouse does not work in Windows XP (Boot Camp)

Is there a way to get my wireless (Bluetooth) mouse to work under Windows XP? It is the mouse that came with my Mac Pro.
I managed to install Windows XP Professional and the Boot Camp drivers w/o a mouse. But now that XP is running fine I still have no mouse. Tried the Control Panel > Bluetooth > Detect Devices (can't remember exact wording), but no Bluetooth device was detected.
Yes I read the Boot Camp installation guide but hope that the USB mouse requirement was only for the installation part and that there is a way to make the mouse work after the Boot Camp drivers are installed.
Many thanks for your help.
Olaf

Most untrue works just fine under Windows actually ,however you do need to repair with windows .AND only after OSx pairing complete AND the Boot camp drivers are installed in Windows.
It uses a special profile to allow pairing in what is in essence two differing computers !
Having said that to get the mighty mouse to pair under windows can take a bit of effort.
When if finds the mouse and asks for a pairing password try either none or 0000!

My wireless card does not work after re installing windows 8 !!

I suppose my card manufacturer is realtek and my card driver is gemtek my network adapter driver I've downloaded and installed it my nothing happens. In my device manager there is no wireless card please help me!!!!!!
My system says no wireless card detected my PC was dos based and when I installed windows 7 everything just went fine. After some days it was formatted and again I installed windows 7 ultimate but my wifi adapter and card was not in the device manager. Please help me!!

my pc is lenovo c320 aio
intel g630, 2gb ram, dvd r/w, realtek gbe ethernet controller, usb 2.0x5 ports, keyboard and mouse

Satellite Pro 4600 Wireless card does not work with WIN2K ?

I have a Satellite Pro 4600 with UK dealer installed PA3070U-1MPC wireless card running with Windows 2000
The wireless client manager finds the network of my wireless router and reports the signal is excellent and I see all green bars swhowing.
However I can't mske a connection, in 'connections' the wireless one says 'network cable is disconnected'
the router works ok with other laptops in my house.
I have latest version of Win2K also have downloaded and installed latest versions of client manager and WLAN card driver for win2k from toshiba website.
The 'toshiba support in Turkey' told me 'I need a different driver for Win2K for my wireless card cause the win2K driver on the toshiba website is not for 'this' wireless card'. I have waited for this for 3 weeks now and have been unable to reach the elusive UK Level 3 support who supposedly have this driver. I have seen on the internet the same wireless card is has been sold as a 'made by toshiba' accessory and it says it is compatible with Wim2K
What do I do next please ? Does this run at all with Win2K , is there 'another driver' and so on ?
Thanks

hello
please be more scpecific - what do you mean by 'disconnect the LAN' - I have nothing conneced there anyway ? do you mean 'disable' the LAN even though there is nothing plugged in ? can you please post the exact sequence of this so I can try ir too.
In the meantime my laptop has been to Toshiba for them to sort out at their highest level UK support base. I was hoping my troubles would be over - but no, read below what happened. They are basically saying my win2k is not in order but I had just installed and updated it so right now I haven't a clue what to do next.
START QUOTE of Toshiba Support response:
Sat Pro 4600
Serial No: 31474181G
Windows 2000 SP4 (customers build not recovery CD)
BIOS V1.80 not current therefore updated to V2.60
The notebooks wireless card is functional and has the correct driver installed, it also has the correct and latest version of the Wireless Client Manager. The wireless function appears to see the router but will not connect and obtain an IP address. Irrespective of the settings applied within Internet Explorer or the Wireless client manager you cannot obtain a connection. The customer did not have any Toshiba utilities installed such as, Power Saver, Common Modules, Chipset drivers, network device switch, I therefore installed these missing components and updated the BIOS to the most current revision. However despite this the unit will still not connect to the wireless.
I therefore removed the customers HDD and replaced his HDD with a Toshiba loan HDD with a fresh build that I had created. When using the machine with this build the wireless connected without issue and I was able to browse the internet etc. I placed the customers HDD into our machine and the problem with the wireless was replicated on our machine here, therefore the problem is not with the wireless card or any hardware aspect of the machine, the problem lies with the customer's build of Win 2000. I examined for anything obvious but could not find anything, therefore I'm sending this machine back to customer with the advice that his build needs addressing or he needs to reload Win 2000 his machine.
As you can see from the above comments, the machine performs as per specification with loan HDD and fresh build of Win 2000 installed, the problem is only present with you HDD and build in the machine. In addition to this I have replaced the missing screws on the base of the machine ensuring the machine is structure is maintained.
5 x B16 Screws
1 x B6 Screw
1 x Memory Cover Screw
END QUOTE

Wireless Networking does not work within Windows Vista

I need to use Windows IE6 for work but when I open my Windows application, I cannot get my wireless networking to function. Diagnostics says I don't have a Network Adapter install. Back in the MAC O/S, the wireless networking functions fine.
???

Resolved. Windows server 2008 r2 works cool secured. with Mavericks in MBP 2014. All are working well.
Steps:
Identify your mac book and related Boot camp version from Apple support and download.
Integrate the drivers as mentioned in the below link.
for install.wim follow the steps in the below link.
for install.esd (this is the case with Windows server 2008 r2), convert install.esd to install.wim, integrate the drivers and convert back to install.esd and replace the original install.esd.
Install Windows (7 or 8 or server 2008)
After installation install additional drivers from Boot camp - driver folder.
For Windows, all should function (all are functioning for me).
For server versions (all drivers are installed), you have to enable sound from device manager, enable wireless connection by adding additional features from Server manager, it works.
For windows server 2012, integration is not required, it installs as is for MBP 2014, only wireless have to be enabled through server manager (remaining all worked fine)
While installing the drivers, install Boot camp, to enhance additional features like track pad etc., (as in Mac OS)
(Note:
'install.wim' or 'install.esd' integration is needed to avoid hangout during installation - to enable track pad and keyboard
intel folder) to $WinPEDriver$ folder to install chipset drivers, during OS installation. Chipset driver is not getting installed, when you install along with other drivers, gives out error.
Enjoy Windows (any version) with Mac Book Pro.

Wireless net does not work after installing SP1 for Vista - Error code 10

After installing Vista SP1 on my computer (T61 - Vista Business 32 bit) my intel 82566mm wireless net does not work.
Windows says "Error code 10" and suggests that I update the driver. I have downloaded the newest driver via another computer, but it does not help. Still error code 10.
Any one else has the same problem?

I fixed the problem. Uninstall iTunes and then reinstall it clean. Looks like upgrading is problematic.

Satellite Pro A200 Windows XP, 4Gb SDHC Card does not work.

Hi,
I have had a Satellite Pro A200 installed with Windows XP, SP2 for some time - No problems there, a great piece of kit. However I recently have bought a new camera and splashed out on a Kingston 4Gb SDHC card. The manual for my A200 seemes to indicate that it my laptop is compatible with SDHC cards to 4Gb however when I push the card in the LED flashes blue briefly and then nothing happens. My SDHC card does not appear to be recognised by the system.
I see no errors in my OS event log and I have checked the slots operation by trying an older 512Mb SD card and that works fine.
Can anybody offer any help please?
For reference this laptop is a Model PSAE4E A200.
Many Thanks in advance
Simon

If the above fix does not work (which it didn't for me on a Satellite Pro A100 running XP), try
[http://support.microsoft.com/kb/923293] .
That one did the trick

ITunes 12.1.1 does NOT work with Windows - Fix??

Hi everyone,
I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly. Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components. It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version. I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

I have wireless mouse does not work with boot camp

i have wireless mouse does not work with boot camp

Did you install the correct driver for your Windows version? Are you saying the mouse does not work in Windows after Windows is installed?

HP Mediasmart Live TV does not work on Windows 10

HP Mediasmart Live TV does not work after Windows 10 upgrade. Error says: Your TV tuner cannot be accessed because it is being used by another application. Please close any programs that might be using it and then try again. Although I am able to open the settings and scan for channels, and I see the channels being found, but still no luck watching after the setup is done. My HP Laptop has a built in HP ATSC/Analog TV Tuner card. (AVerMedia maybe?) I suspect that is may have something to do with the fact that the driver does capture at the same time you are watching (Allows you to pause and then continue watching live TV, also has the ability to scedule recordings) Unfortunatly Windows 10 also removes Windows Media Center, so I can't check with that software, is also possible a remnant may be left behind to support Windows Media Center that is conflicting with something else. Also would be nice if they would fix the installers so it does not uninstall the software, then fail to re-install it. (All without any display or error messages, so your left scratching your head trying to figure out what happened.) I managed to get the rest of MediaSmart to work, although it looks like the internet veiwer may not connect to anything anymore. Looking for an updated driver or installer, or patch that would work for Windows 10. As far as I can tell on the internet HP MediaSmart Live TV is supposed to work on Windows 10.

OK, More information. Installed Media Portal 1. This works with the tuner card without additional modification, so this appears to be some kind of issue with the software. Media Portal 1 does install a different version of Direct X, I don't know if that could have anything to do with it, but HP MediaSmart Live TV still comes up with the same error and will not run.

HP Deskjet 2540 scan does not work with windows 10

my HP Deskjet 2540 scan does not work with windows 10, however, it still does eprinting. i need the solution and i haven't got it.

OK, More information. Installed Media Portal 1. This works with the tuner card without additional modification, so this appears to be some kind of issue with the software. Media Portal 1 does install a different version of Direct X, I don't know if that could have anything to do with it, but HP MediaSmart Live TV still comes up with the same error and will not run.

Flash player does not work in Windows 8 tiles

Flash player does not work in Windows 8 start metro tile applications. Flash player also does not work in Windows 8 start tile internet explorer 10 1n windows 8. Flash player does work in Windows 8 desktop internet Explorer 10. I tried all of the recommended fixes suggested by adobe Flash Player Issues/windows 8 page. I have reinstalled Windows 8 operating system. What should I try next?

This is a known issue with Flash Pro CC - GM build.
this crash has been fixed in the update that was released recently. Please update to 13.0.1.808 version and it should fix this.
Please reply if it still persists after the update.
-Sujai

ITunes 9 Home Sharing does not work on Windows 7 x64

iTunes 9 Home Sharing does not work on Windows 7 x64.
Getting the following error message:
Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
I've just upgraded my iPhone to OS 3.1 using it this morning.
Please advise.
Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
Ivan Farkas
<edited by host>

I am using Windows 7 x64.
I am running iTunes 9.0.2.25
I am running Mcafee.
I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
Message was edited by: turcott

I have PCI-4452-this card does not work with XP. Are there fixs available?

I have the PCI-4452, i fould that when i installed XP on my system, the card does not work. Does this card have any drivers for ir to work on XP. Or do i have to stay on NT.

Hello,
This card is actually supported under XP for use with drivers since 6.9.2 and above (only traditional driver).
Kind Regards
Steven Bird
Applications Engineer
National Instruments

Wireless Card does not work in Windows 8.1 for G585

Similar Messages

Maybe you are looking for