Wireless card in my computer?

Does my desktop computer HP Pro 3500 Core i5 3470 have a wireless card and if not, what do you recommend so that I can have wireless?

Hi,
No, as from its specs:
      http://www.cnet.com/products/hp-pro-3500-core-i5-3470-3-2-ghz-monitor-none-series/specs/
It only has:
Networking
Type: integrated
Ethernet Controller: Realtek RTL8171E
Data Link Protocol: Ethernet, Fast Ethernet, Gigabit Ethernet
It also has:
2 (total) / 1 (free) x DIMM 240-pin
3 (total) / 3 (free) x PCIe x1
1 (total) / 1 (free) x PCIe x16
1 (total) / 0 (free) x CPU
1 (total) / 1 (free) x PCIe Mini Card
You can use PCIe wireless card or PCIe wireless card. My suggetion use PCIe wireless card because easy to get the antena work. The following links show few examples:
     https://pcpartpicker.com/parts/wireless-network-card/
     http://www.newegg.com/Wireless-Adapters/SubCategory/ID-31
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Help Laptop Cannot Detect my Wireless Card Satellite L305 S5946

So I had to re-install windows to fix a couple of issues I was having. I currently have everything working except now this laptop is not registering that it has a wireless card. I can connect through ethernet and it shows that connection, but it shows no device for the wireless connection and will not read any wireless networks. THe only thing I have under Network Connections in Device Manager is for the Realtek RTL 8102E Family PCI-E Fast Ethernet NIC NDIS 6.0. Also under Manage Connections, it shows only a Lan Connection for wired connection. Anyone have any ideas? This laptop is running vista currently. Any help would be appreciated, I am completely stumped at this point. Thanks! (PS yes I know there is a button to turn wireless on and off, and it is currently switched to on and the light is lit up for wireless)

I checked a couple things. On your computer you can turn off the LAN in the Bios, but not the wireless card. Your computer came with an Athros 802.11b/g card. And the computer should be seeing it. But if it isn't, try reinstalling the driver. Or have a technician look at the computer and verify that the card is there and not half out of the slot or damaged.

How to hookup AE to dlink wireless router hardwired to computer??

Guys,
I have a computer that is hooked up directly to a dlink wireless router. I bought the router specifically to communicate with AE. I cannot find any network to join. Will a setup like this work?
Or do I need to just go back and buy a wireless card for my computer?

The ethernet port on an AX is only active and usable for an external device when the AX joins a network using the WDS protocol. WDS only works with AEBS, AX, and a limited number of third-party wireless routers. Without buying a WDS compatible router, you will need an ethernet to wireless bridge like the Linksys WET54G, or a wireless card for your computer.

Late 2009 iMac Wireless Card Issues

I own a late 2009 iMac. I have been having issues with my wireless card for several years now and have been able to make do with our router being in the same room with our computer. We moved recently and now my iMac is not in the same room as the wireless router. Can some please help me fix or confirm if I need a new wireless card?
My computer shows that there is a wireless card, but the card does not see any networks. I have (on occasion) gotten the card to see the other networks available around us (as well as my own) and to even get it to hook up, but it is short lived. Sometimes the computer locks up altogether.
Can someone help me determine if this is fixable or if I need to replace the card? If I have to replace the card can I purchase one from Apple and do the install myself?
Thanks!
Mike

BDAqua,
Sorry, did not even realise that I had not updated the list. I am running the latest version on the iMac which is 10.7.5.... And you could copy and paste the link into your browser...
Cheers for the response bud...

Dv9810us after recovery windows will not detect the wireless card that is bulit into the computer.

After running the recovery (Vista 32) from the recovery partition my computer no longer sees the Wifi card installed.
There is nothing in device manager, the hp wireless wizard doesn't detect anything. I went to HP's site and download the 3 different wifi drivers that it would be and installed them. I can not rememeber what the adapter was.,. thats a problem.
This system was a refurbed unit when I bought it, if the salesman was correct it was recalled because of a faulty Wireless card. I wonder if they replaced the card with one that the restore partition installation could not detect.
Any ideas?

first make sure the wifi is turned on either by a switch located on the front of keyboard or a soft touch icon near the display.. if you have the soft touch make sure it's blue in color if its orange its turned off

Wireless card deadlocking computer

*TL;DR summary:* high airport card usage results in a deadlock of my mbpro after a few minutes, not even disk access works. This always ends in me holding down the power button for 5 seconds to force restart.
Description
Starting about 3 months ago my Macbook Pro would lose internet connectivity and slowly all applications would end up freezing, forcing me to hold the power button to shut it down.
Looking further into the issue, I would notice that usually during high wireless card usage (streaming audio, downloading files for extended periods of time, etc) the Upload/Download rate on my iStat Menus would instantly drop to 0. Firefox would end up with "server not found" and streaming music would stop playing.
While trying to save my work to disk, I noticed that even writing to disk would not work (any open application would hang when I save a file to disk). Clicking anything on the menu bar usually responds, EXCEPT when I click the Airport menu. After the connection stops, clicking the Wireless Networks icon in the top menu would result in the colored spinning icon and then begins the domino effect lockup.
Finder becomes unresponsive (except sometimes the shutdown menu would appear when clicking the power button, but clicking shutdown does nothing). Every open application would not shut down (still active in the dock).
It ends up with me having to hold the power button down and restarting the computer, losing all my work. This is quite annoying and I am out of my AppleCare warranty. Is this a hardware or software issue? Does anyone have any suggestions as this is ruining my Apple Experience!!
Strangely, if I do not use the wireless card much (e.g. plain web browsing) I have no problems.
Thank you,
Jason

That disk is pretty full and may be causing your problems. Anything over 75% full can do this.
Odd, though, that it works when wired.
Have you taken it in and had an Apple Genius look at it?

Connecting a PC with an external wireless card

I have an iMac and am connected wirelessly to the Internet through the Airport Extreme. My roommate has a new Dell Laptop with Windows XP and has been connected through ethernet to the base station. She just recently purchased an external wireless card, and we can't seem to get her connected wirelessly. When searching for available networks to join on her computer, it recognizes my network and says that it has an excellent signal, but when we type in the WEP, it doesn't do anything. It does not give us an error, and it does not connect. Any idea what we are doing wrong and what we can do to fix it?

I still can't figure it out. I unchecked the option that says "enable encryption (using WEP)" and she was immediately connected. I don't think I have a huge problem leaving the network up without a password, I'm in a small residential area. Does that just mean that neighbors would be able to connect? How far does the signal generally travel? And is there any way to see the IP addresses of people connected to this specific network?

G500 Driver_Power_State_Failure problem most likely related to Wireless Card

I recently upgraded my Lenovo G500 laptop to 8.1.
After that, I've been constantly getting BSOD every time I modify some settings on my WIreless card (Broadcom 802.11n Network Adapter). For instance, changing my MAC under the"Locally Administered MAC Address" causes the Wireless configuration window to stop responding, then my wireless adapter becomes permanently disabled (I try to enable it and it says that it is enabling but the adapter remains faded out and locked in a disabled state) unless I restart or power down my laptop. If I restart, the laptop hangs for 3-5 minutes and then a BSOD comes up and suggests that I look online for DRIVER_POWER_STATE_FAILURE.
I have updated the adapter as well as most, if not all outdated drivers on my laptop with the 8.1 drivers offered on Lenovo's support pages (This includes power management, BIOS, LAN, Audio, etc.). Even attempting to voluntarily disable my wireless card causes the BSOD.
As long as I don't touch/modify such settings, I have wireless internet and all seems fine but once I do what I stated above, my laptop crashes with a BSOD. I have looked up and searched about such a BSOD but my laptop has zero problems when I put it to sleep or wake it up. My laptop functions practically flawless except for when changing/modifying settings on my wireless card.
For instance, on Whocrashed.exe:
On Thu 11/7/2013 9:33:19 AM GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\110713-17031-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x150B36)
Bugcheck code: 0x9F (0x4, 0x12C, 0xFFFFE00000EB5040, 0xFFFFD000205F8860)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Thu 11/7/2013 9:33:19 AM GMT your computer crashed
crash dump file: C:\WINDOWS\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x4, 0x12C, 0xFFFFE00000EB5040, 0xFFFFD000205F8860)
Error: DRIVER_POWER_STATE_FAILURE
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time
On bluescreenview:
Bug check string: DRIVER_POWER_STATE_FAILURE
Bug check code: 0x0000009f
Parameter 1: 00000000`00000004
Parameter 2: 00000000`0000012c
Parameter 3: ffffe000`00eb8040
Parameter 4: ffffd000`20472860
Processor: x64
Caused by driver: NETIO.SYS
Caused by address: NETIO.SYS+1ddb2
Crash address: ntoskrnl.exe+150b36
I ran SFC /scannow and it did detect corrupted files but that has been resolved using the Restorehealth command prompt. I have tried booting to safe mode, uninstalling the adapter and then updating straight to the most current 8.1 driver and that still causes the BSOD.
I'm almost certain that my wireless card probably is defective, or the laptop is defective. I'm still under warranty but I'm hoping to fix this issue before resorting to what I deem as last resorts of factory restoring the laptop or calling Lenovo support.
I am also providing minidumps, driver lists and a whole ton of useful information on my Skydrive:
http://sdrv.ms/17OIYda
Any suggestions or help on this matter would be greatly appreciated as I feel like I've exhausted all other methods.
Moderator Note; subject edited; system type added

"If I restart, the laptop hangs for 3-5 minutes and then a BSOD comes up and suggests that I look online for DRIVER_POWER_STATE_FAILURE."
I had the exact same problem on a Thinkpad Helix after upgrading to Windows 8.1, although I do not know if it was in anyway related to the wireless hardware as you described. However, I noted that in the Device Manager many wireless hardware components had been highlighted with an exclamation mark since the problem had occured (e.g. Bluetooth, Geolocation, Broadband). Here is how I fixed it:
1. I went to System Settings / Device Manager.
2. Disabled all devices that were highlighted with an exclamation mark. I noted that the Device Manager would not respond after disabling so I closed it and then chose to not wait (i.e. forced the Device Manager to close).
3. Repeated step (2.) until all devices highlighted with an exclamation mark were disabled.
4. Restarted the laptop (I don't know if I had to force the shut down via power off at that time, but it may be necessary or you wait for the BSOD).
5. Repeated step (1.) and uninstalled all the drivers of the devices disabled in steps (2.) to (3.), enabling the option to remove the driver from the system, where possible.
6. Restarted the system. This time the shutdown should only take a few seconds.
So far, everything works fine again and I cannot identify any limitations through the disabling and uninstalling of devices (esp. wireless devices do work flawlessly).
Hope this works for some of you guys out there as well. Let me know.
Good luck!
neophilos

Want to add Video and Graphic Card to my computer system

I Notice that one of the users' in the Apple discussion Board is Listed, (AndyO) he has help me many times in the Past and was succesful in my problrm solution, would he might be able to help me with this?
I had Purchased the Game Spore Creature Creator the Starter Kit which is just the Creature creator game and not the actual game itself. I wasn't able to install the the game on my computer because I don't have the right or not at all Video and Graphic Card install on my computer. I had Contacted the Company "EA" that puts out the Game Spore, this is what they said what the game requirements are: The minimum system requirements for Spore and Spore the Galactic Edition for Mac are as follows:
* Mac OS X 10.5.3 Leopard or higher
* Intel Core Duo Processor
* 1024 MB RAM
* At least 345 MB of hard drive space for installation, plus additional space for created creatures. (260 MB for the Trial Edition)
* Video Card - ATI X1600 or NVidia 7300 GT with 128 MB of Video RAM, or Intel Integrated GMA X3100
This game will not run on PowerPC (G3/G4/G5) based Mac systems (PowerMac).
For computers using built-in graphics chipsets, the game requires at least: an Intel Integrated Chipset GMA X3100 or Dual 2.0GHz CPUs, or 1.7GHz Core 2 Duo, or equivalent
Supported Video Cards
ATI Radeon(TM) series
* X1600, X1900, HD 2400, HD 2600
NVIDIA GeForce series
* 7300, 7600, 8600, 8800
Intel(R) Extreme Graphics
* GMA X3100
and that I need to upgrade my system. Basically I need; ATI Radeon 1600 or NVIDIA Geforce 7300 and a INTEL Extreme Graphic Video Card-GMA X3100, in order to be able to install and play this game. Since I already have this game, I would like to be able to upgrade my computer system which brings me to ask; does somone know or refer me to a web site that has and sells these Video and Graphic Card and supports for the Mini Mac?
Plus they say that I need a 1020 of MB of Ram, I Have already found that 1024 MB of Ram but I just need those Video and Graphic Cards for my computer system. I am adding my computer system Profile to my discussion board to show you what I have on my system, would you be able to tell me if I would be able to add these Video and Graphic card and the memory or Ram 1024 to my computer system?
Note: Here is a web site that I am looking at to add the 1024 MB of Ram to my computer system:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=24188 41&CatId=2453
what do you think?
Here is part a copy info of my computer system Profile:
Trisha Foster’s Mac mini
10/10/08 5:39 PM
Hardware:
Hardware Overview:
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MM21.009A.B00
SMC Version: 1.19f2
Serial Number: YM8073Q**
Network:
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4 Addresses: 169.254.247.182
IPv4:
Addresses: 169.254.247.182
Configuration Method: DHCP
Interface Name: en1
Subnet Masks: 255.255.0.0
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet:
MAC Address: 00:1f:5b:3e:ce:93
Media Options:
Media Subtype: Auto Select
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
IPv4 Addresses: 192.168.1.102
IPv4:
Addresses: 192.168.1.102
Configuration Method: DHCP
Interface Name: en0
NetworkSignature: IPv4.Router=192.168.1.1;IPv4.RouterHardwareAddress=00:21:29:c3:12:ae
Router: 192.168.1.1
Subnet Masks: 255.255.255.0
IPv6:
Configuration Method: Automatic
DNS:
Domain Name: cruzio.com
Server Addresses: 74.220.64.45, 74.220.64.55
DHCP Server Responses:
Domain Name: cruzio.com
Domain Name Servers: 74.220.64.45,74.220.64.55
Lease Duration (seconds): 0
DHCP Message Type: 0x05
Routers: 192.168.1.1
Server Identifier: 192.168.1.1
Subnet Mask: 255.255.255.0
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet:
MAC Address: 00:16:cb:af:11:7f
Media Options: Full Duplex, flow-control
Media Subtype: 100baseTX
FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet:
MAC Address: 00:1f:5b:ff:fe:17:17:2a
Media Options: Full Duplex
Media Subtype: Auto Select
Software:
System Software Overview:
System Version: Mac OS X 10.5.5 (9F33)
Kernel Version: Darwin 9.5.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Computer Name: Trisha Foster’s Mac mini
User Name: Trisha Foster (tiger)
Time since boot: 59 minutes
ATA:
ATA Bus:
PIONEER DVD-RW DVR-K06:
Capacity: 423.4 MB
Model: PIONEER DVD-RW DVR-K06
Revision: Q614
Removable Media: Yes
Detachable Drive: No
BSD Name: disk2
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
Volumes:
SPORE:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
BSD Name: disk2s0
Mount Point: /Volumes/SPORE
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x83847680
Audio ID: 8
Available Devices:
Headphone:
Connection: Combo
Speaker:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.1.0f17
Hardware Settings:
Trisha Foster’s Mac mini:
Address: 00-1f-5b-72-12-aa
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: Yes
HCI Version: 3 ($3)
HCI Revision: 1965 ($7ad)
LMP Version: 3 ($3)
LMP Subversion: 1965 ($7ad)
Device Type (Major): Computer
Device Type (Complete): Macintosh Desktop
Composite Class Of Device: 3154180 ($302104)
Device Class (Major): 1 ($1)
Device Class (Minor): 1 ($1)
Service Class: 385 ($181)
Requires Authentication: No
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Downloads
Requires Authentication: No
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 10/10/08 4:41 PM
Result: Passed
Disc Burning:
TEAC CD-W540E:
Firmware Revision: 1.0F
Interconnect: FireWire
Burn Support: Yes (Apple Supported Drive)
Cache: 8192 KB
Reads DVD: No
CD-Write: -R, -RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw
Media: Insert media and refresh to show available burn speeds
PIONEER DVD-RW DVR-K06:
Firmware Revision: Q614
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:
Type: CD-ROM
Blank: No
Erasable: No
Overwritable: No
Appendable: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
OXFORD IDE Device LUN 0:
Manufacturer: Oxford Semiconductor Ltd.
Model: 0x42A258
GUID: 0x1D200500648AF
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
OXFORD IDE Device LUN 0 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x444133
Product Revision Level: 1.0F
Sub-units:
OXFORD IDE Device LUN 0 SBP-LUN:
Graphics/Displays:
Intel GMA 950:
Chipset Model: GMA 950
Type: Display
Bus: Built-In
VRAM (Total): 64 MB of shared system memory
Vendor: Intel (0x8086)
Device ID: 0x27a2
Revision ID: 0x0003
Displays:
L1916HW:
Resolution: 1280 x 800 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Memory:
BANK 0/DIMM0:
Size: 512 MB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0xAD00000000000000
Part Number: 0x48594D503536345336344350362D59352020
Serial Number: 0x0000**
BANK 1/DIMM1:
Size: 512 MB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0xAD00000000000000
Part Number: 0x48594D503536345336344350362D59352020
Serial Number: 0x00001*
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On LAN: Yes
Hardware Configuration:
UPS Installed: No
Printers:
Canon MP830:
Status: Idle
Print Server: Local
Driver Version: 4.8.3
Default: Yes
URI: usb://Canon/MP830?serial=19702D
PPD: Canon MP830
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA:
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
Hitachi HTS541612J9SA00:
Capacity: 111.79 GB
Model: Hitachi HTS541612J9SA00
Revision: SBDAC7MP
Serial Number: SB2EF9L7G3**
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 111.47 GB
Available: 63.14 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x27cc
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Keyboard Hub:
Version: 94.15
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x1006
Serial Number: 000000000000
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB RECEIVER:
Version: 25.10
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0xc50e
Vendor ID: 0x046d
Apple Keyboard:
Version: 0.69
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple, Inc
Product ID: 0x0220
Vendor ID: 0x05ac (Apple Computer, Inc.)
iPod:
Version: 0.01
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Product ID: 0x1291
Serial Number: aa1186ca1738fd28eef1eeb1b22754********
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB2.0 Hub:
Version: 7.02
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Product ID: 0x0606
Vendor ID: 0x05e3
USB 2.0 3.5" DEVICE:
Capacity: 153.39 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Version: 0.01
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Macpower Technology Co.LTD.
Mac OS 9 Drivers: Yes
Partition Map Type: APM (Apple Partition Map)
Product ID: 0x0073
Serial Number: BC0*
S.M.A.R.T. status: Not Supported
Vendor ID: 0x0dc4
Volumes:
miniStack:
Capacity: 153.26 GB
Available: 42.96 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s10
Mount Point: /Volumes/miniStack
MP830:
Version: 1.15
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Canon
Product ID: 0x1713
Serial Number: 197*
Vendor ID: 0x04a9
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c8
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c9
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27ca
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x5d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27cb
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x7d
Bluetooth USB Host Controller:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x8205
Vendor ID: 0x05ac (Apple Computer, Inc.)
IR Receiver:
Version: 1.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer, Inc.
Product ID: 0x8240
Vendor ID: 0x05ac (Apple Computer, Inc.)
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x168C, 0x86)
Wireless Card Locale: USA
Wireless Card Firmware Version: 1.4.4
Current Wireless Network: Trisha's iPod
Wireless Channel: 11
Firewall:
Firewall Settings:
Mode: Allow all incoming connections
Locations:
Automatic:
Active Location: Yes
Services:
AirPort:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: 00:1f:5b:3e:ce:93
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
IEEE80211:
Join Mode: Automatic
JoinModeFallback: Prompt
PowerEnabled: 1
PreferredNetworks:
SecurityType: Open
SSID_STR: Apple Store
Unique Network ID: 4BCBEE2D-83B9-4CC1-B110-8D0E8E5DF49C
SecurityType: Open
SSID_STR: linksys
Unique Network ID: F2551FD6-95A7-4F98-9F7F-758A89DBD931
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial On Demand: No
Disconnect On Fast User Switch: Yes
Disconnect On Idle: Yes
Disconnect On Idle Time: 600
Disconnect On Logout: Yes
Disconnect On Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:16:cb:af:11:7f
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:1f:5b:ff:fe:17:17:2a
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
Can someone Please help me with any suggestions or otherwisde I will have to go to a Apple store and ask for help there.
Thank You,
Trisha Foster
<Edited by Moderator>

Hi Trisha,
The only modern Mac's with video cards are the Mac Pro and Xserve (server) systems. They both are priced quite a bit higher than any Mac Mini.
Some systems, like the Mac Book Pro laptop can be ordered with different graphics cards, but that has be done when the system is built, as it is not replaceable once the system is built. To find out which systems, go to store.apple.com. For each system that you select, you can see if there's an option for a better video card.
David

Can't change MAC address of my wireless card on Windows XP

Dear Forum Members,
I have recently bought a notebook, Lenovo IdeaPad G550L (I haven't found section for the G series here on the forum) and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly changed MAC address. I installed the recommended driver, available from Lenovo's website, version 5.10.38.14. I tried the common way to change the MAC address, went to Control Panel -> Network Interfaces -> Broadcom Wireless Network Adapter -> Configure... -> Advanced -> Locally administered MAC address, and changed it to a different address (without ":" or any separator characters). Unfortunately this common solution won't work at all. Although, no error messages are produced when changing it (so it seems successful) my wireless router shows me the original MAC address of my integrated wifi card. Tried to restart my computer, my router, everything.
* Tried different drivers, downloaded a driver from HP which had a separate wireless configurator, Broadcom Wireless Utility. It worked like the driver from Lenovo (except this one hasn't got the utility), but I was still unable to change my MAC address.
* Tried a different driver from SoftPedia, version 5.10.79.14 (this is newer than Lenovo's), it didn't work either.
* Tried Nathan True's MACShift utility. It seemed to change the MAC address, but my router showed the original, so it didn't.
* Tried to look for official Broadcom drivers on www.broadcom.com but found nothing for BCM4310.
* Finally, I booted my alternative OS, the latest Ubuntu Linux, and used the kernel driver b43 for my wireless adapter. I tried to change my MAC address using the command ifconfig wlan0 hw ether .... and connected to my network. It worked, my router showed the changed MAC so the hardware (or the firmware) is capable of doing this by the right driver/firmware.
I tried to address Broadcom with the issue, sent them a letter like this post they replied that they are not competent, they wrote the following (I guess this was an automatically generated message because it got back in 10 seconds ) from [email protected]:
"As the chipset supplier, Broadcom provides driver support to our customers - the manufacturers of wireless devices - that ultimately provide products to end customers, such as wireless LAN vendors, cable modem vendors, and notebook providers. It is up to these manufacturers to provide product-specific drivers and software support to their end customers. Please contact the manufacturer of your wireless device for their current drivers"
Then I addressed Lenovo with the problem, their answer:
"Dear ******,
Thank you for contacting Lenovo, the makers of ThinkPad and ThinkCentre products. As I understand, you have purchased a Lenovo IdeaPad G550L and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly change MAC address.and you would like to know is there an official driver for Windows XP that allows you this basic feature like b43 in Linux. We apologize,Please do speak with our Idea pad technical Team at 877-453-6686 Option 1-2-1-2 for further assistance.
If you have further questions or concerns, please feel free to contact us at 866-42-THINK (84465) option number 2. We will be happy to assist at that time.
Once again, thank you for contacting Lenovo.
Sincerely,
Lenovo Websales/CustServe"
So this means I should call them and spend extra money for phone bill of international calls because of their fault of providing a basic feature that is to be expected from every single wireless card in the market. Should I believe that a guide over the phone is more efficient than a step-by-step solution or a link to an alternative driver? I'm getting kind of disappointed. At least they have understood (or copy-pasted) my problem, dutch comfort though.
Any ideas? Anyone experienced the same problem and solved it? Is there an official (or even unofficial) driver for this device for Windows XP that allows me this basic feature (like b43 in Linux)?
Thanks in advance,
str4ngS

Yes, I have posted this thread to different forums after I realized that Lenovo "customer care" is not likely to help me out and even wirelessforums.org members couldn't come up with any ideas for days, that's why. I have already written that helper applications like SMAC (or etherchange or macshift) don't work, because they do the same thing in the system as I change it in the driver panel, so they use the same method which simply does not work.
Locked? Definitely not. If yes, why can I change the MAC of my adapter under Ubuntu Linux using b43 open-source driver if it's really locked? Or you mean it's locked from software, because Lenovo or Broadcom didn't want their users to change their MACs or they just forgot to release a fully-functional driver? Well, then I would like to have a driver in which it's not locked, because this is a basic feature of my adapter of which the hardware is capable.
I have already contacted Broadcom, see their (automatically-generated) answer in my initial post, but I will try to do that again with more foresight.

Snow Leopard and my alltel wireless card do not get along.

I recently purchased an alltel wireless card for my MacBook that connects to the internet fine, but appears to be messing with the operating system . . . or something. Alltel said they write their software according to the information they received from Apple. Apple says they send the operating system to Alltel, and they have no way to fix my problem. Can anyone out there help me?
It seems that if I shut down my MacBook after every time I use the card, I am OK.
If I use it more than once without shutting down, things start to go wrong. For example, sometimes the keyboard stops working. The mouse is fine.
More often, I disconnect from the Quicklink (alltel) software, pull the card, only it seems the software has not truly disconnected, as the Menu Bar ceases to work, the colored wheel spins and spins, and I cannot shut down my MacBook, not even w/the "3 magic keys," unless I press the power button. A complete shutoff always solves any problems.
I did check Disk Utility and found that many disk permissions did not match and repaired them. This did not fix the problem.
My local Mac "fixer" said she had the same problem with another customer and had to re-install the operating system, etc., etc., but would have to charge me a minimum of $70. She has no idea why this worked or if it will work with my MacBook. I do not want to spend $70 with no guarantee, or even probability, that the problem will be solved.
Any ideas?

Hi Voodooflea, I have experienced exactly the same problem as you describe here. The solution I found was to simply NOT use the QuickLink Mobile software to connect. Rather, just go into your System Preferences and then to the Network section. If it isn't already there, create a new connection with the modem, putting in the appropriate numbers for the telephone and account name. Then, connect from within the Network system preferences and you probably won't have the lock-up of your computer. It seems that I only have this problem when I use the QuickLink Mobile software to connect. Let us know if this works for you.

Can't create a wireless network without a wireless card on my Mac

Help!
O.k. I tried searching the forums for an answer but the odd nature of my problem, and the immense database of topics made it very difficult to find a similar post.
The general issue/idea:
Run a wireless network using Airport Extreme - Connect desktop mac via ethernet and Roku player via wi-fi. Can't get the desktop mac to connect via ethernet when I restart the network/Airport Extreme.
My Father in law has my old computer; It's a PowerMac G5 (Dual 1.8GHz CPUs) running OS 10.5.8), connected to internet via cable (TimeWarner) modem. It does NOT have an Airport or Airport Extreme card installed. The computer works fine, and I don't believe that I 'need' an Airport Card in order to use the Airport Extreme (it's a brand new/refurbished model) in the manner described below.
I would like to use the Airport Extreme to generate/run a wireless network (Do I need an Airport Card in order to generate/run a wireless network? Doesn't the AE actually do that?), connect the desktop Mac to the network via Ethernet (I shouldn't need an Airport Card to do that, should I?) and connect a 'Roku Player (802.11g capable) to the network via wi-fi.
As far as I know, this should be possible.
Basic steps/as I understand them:
A. Connect ethernet from cable modem to AE.
B. Connect ethernet from AE to desktop Mac.
C. Create the wireless network using desktop Mac and Airport Utility.
D. Restart AE to start the wireless network running.
E. Connect Roku to wireless network over wi-fi.
I have no problems with A & B. Once the AE is connected to the desktop Mac, I'm able to get internet via ethernet as it passes through the AE. I can then create a wireless network (step C.) using the Airport Utility (and setup assistant). The problem starts after I've configured the wireless network.
Once I've configured the wireless network, the Airport Utility software prompts me to restart the AE in order to start the wireless network.
As soon as I restart the AE, my desktop Mac tries to connect to the 'wireless' network, even though it's already connected via ethernet. I don't have a wireless card in the Mac, and I don't want to connect the desktop using wi-fi/wireless. It's connected via ethernet, works fine during configuration, and I don't ever anticipate a desire to connect the desktop via wi-fi.
No matter what I do, I can't get the desktop to connect via ethernet. The only network connection option I'm offered is 'Rescan'. O.k. the desktop can't find the wireless network (because it doesn't have a wireless card), and I'm unable to continue with the Airport Utility. I can't make any further changes to the network (the options to manually change the network configuration are not available as the desktop Mac cannot currently talk to the AE - It's still trying to connect wirelessly), and the desktop has no internet connection as it's trying to connect wirelessly.
*How can I...*
*Setup/run a wireless network, while keeping the desktop Mac connected via ethernet?*
I'm perfectly willing to factory reset the AE and start over.
Any help appreciated.
Thwarted by the network.
- Robert

My Father in law has my old computer; It's a PowerMac G5 (Dual 1.8GHz CPUs) running OS 10.5.8), connected to internet via cable (TimeWarner) modem. It does NOT have an Airport or Airport Extreme card installed. The computer works fine, and I don't believe that I 'need' an Airport Card in order to use the Airport Extreme (it's a brand new/refurbished model) in the manner described below.
That is correct, you could connect the PowerMac G5, via Ethernet, to the AirPort Extreme Base Station (AEBS) or any other wired router for Internet access. You do NOT need an AirPort Card for wired access ... ONLY if you want the G5 to connect to a wireless network.
I would like to use the Airport Extreme to generate/run a wireless network (Do I need an Airport Card in order to generate/run a wireless network? Doesn't the AE actually do that?)
That is correct, the AEBS is a wireless router that can provide a wireless network. The AirPort Card, on the other hand is a wireless adapter used to allow a Mac to connect to a wireless network, created by any wireless router ... not just those provided by Apple.
As far as I know, this should be possible.
Basic steps/as I understand them:
A. Connect ethernet from cable modem to AE.
B. Connect ethernet from AE to desktop Mac.
C. Create the wireless network using desktop Mac and Airport Utility.
D. Restart AE to start the wireless network running.
E. Connect Roku to wireless network over wi-fi.
Yes, these are all good assumptions.
As soon as I restart the AE, my desktop Mac tries to connect to the 'wireless' network, even though it's already connected via ethernet. I don't have a wireless card in the Mac, and I don't want to connect the desktop using wi-fi/wireless.
Do you actually have an AirPort Card installed in the G5 now? If so, then it might be possible that the "firing order" for network connectivity has AirPort at the top of the list under System Preferences > Network. Just change the order to have Ethernet at the top and disable AirPort to ensure that the G5 connects by Ethernet only.

Wireless card seems to be not working

Hello everyone,
I haven't had any problems with my wireless card for my Macbook Pro since I purchased it, but something seems to be acting up now. Here's the situation...I went away for the weekend, took my laptop with me, didn't use the internet at all. Then I came back to my wireless card not working. It has a self-assigned IP address of 169.254.183.17. I did some reading on it and what people of said is that when you have this particular address your computer can't access the internet. I have power cycled both the router and modem correctly without any success.
I have another laptop that is windows based that can connect wirelessly so I've identified that it isn't a router problem. The thing that baffles me is that I can hard wire my Macbook into the router and achieve a connection...any suggestions on what I should try next?
Thanks in advance.
Message was edited by: Jaden Pretzlaw

Thanks for replying,
I did go into advanced settings to see what was up. And the TCP/IP tab was the area that I was focusing on. Okay...I did try renewing the DHCP lease and it keeps giving me the unusable IP address. One potential problem that may be contributing to this fiasco is that I think the modem in my household is also a router (which we're just using as a modem). The modem isn't mine so I'm not sure how it was setup. I don't believe that modem is activated to give off a wireless connection. I don't know why it would be a problem because I was connecting to the router just fine before. If the windows based laptop can connect just fine, it wouldn't be the router...(just thinking out loud here).
I was given an option by one of our IT personal at the office that I work at...he said that I could completely remove the network from my saved list and re-enter it. He also said that I would have to delete some temporary files that are saved in a hidden folder that are "preference" files for that specific network. I wasn't able to find that folder, and I did try deleting the network but it didn't seem to fix the situation. If I could simply just go back to square one, as I did when I first connected to the network I'm sure it would fix everything.
I hope this wasn't too long to read, hopefully it gives good insight.
Regards
Message was edited by: Jaden Pretzlaw

Intel Wireless Card doesn't work with Linksys?

My wired computer works great with the WRT54GX2, but my wireless cannot hold a signal for very long. Support says they can't help me because I have a Intel wireless card. Intel does not support for that card anymore and I can't see where to buy a Linksys card. Please, help.
Bonnie

check the link for the linksys retailers
Retailers
Message Edited by Maximus on 07-21-2006 05:48 PM
I do know everything, just not all at once. It's a virtual memory problem.

MBP having Kernel Panic (Crash) all the time due to Wireless card firmware.

Hi all,
I am desperately needing helps from the experts here now. I have the latest santa rosa Macbook Pro. It has been crashing on me lately due to the wireless card firmware. I have run all the latest updates from software update including the AirPort.Atheros firmware update. I have tried to reformat the hard drive and installed a fresh and clean Mac OSX. The crash still persists before AND after the AirPort.Atheros firmware update. I mean I was not having this issue when I first bought the computer while others were whining all over the internet about this problem. When the fix came out, everyone
s problems seem to be solved but my problem arose . A recent Kernel panic crash log is as following:
panic(cpu 1 caller 0x0035D113): freeing free mbuf
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x364539f8 : 0x128d08 (0x3cc0a4 0x36453a1c 0x131de5 0x0)
0x36453a38 : 0x35d113 (0x3ecf98 0x0 0x10 0x0)
0x36453a58 : 0x35d4b3 (0x4884fe00 0x0 0x246 0x1)
0x36453a78 : 0x51b56695 (0x4884fe00 0x0 0x20 0x4ee1d00)
0x36453be8 : 0x51b569d4 (0x3493c2c8 0x3493e148 0x36453c58 0x1416ad)
0x36453d38 : 0x51b62d85 (0x3493f004 0x0 0x4b285c 0x4c2ec070)
0x36453eb8 : 0x51b33d9a (0x3493c4c0 0x51bb8da4 0x36453ed8 0x19e23a)
0x36453f48 : 0x51b324a9 (0x4ce1004 0x0 0x36453fc8 0x19a001)
0x36453f78 : 0x13d7d9 (0x4ce1494 0x4ce1004 0x0 0x0)
0x36453fc8 : 0x19ad2c (0x0 0x0 0x19e0b5 0x5b3b3e0) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AirPort.Atheros(235.9.3)@0x51b31000
dependency: com.apple.iokit.IONetworkingFamily(1.5.1)@0x4c63c000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x465e6000
dependency: com.apple.iokit.IO80211Family(162.1)@0x4c73b000
Kernel version:
Darwin Kernel Version 8.10.1: Wed May 23 16:33:00 PDT 2007; root:xnu-792.22.5~1/RELEASE_I386
A way to know that the crash is gonna happen is that the internet stops working and as long as I click on the wifi icon on the menu bar, The crash occurs. Could someone please help to put me out of misery please . Thank you so much for reading this and any suggestions are greatly appreciated.
Thank you
Have a nice day.

i would try this in a test user to see if the issue occurs (more than likely it will)also i would reset the smc and the pram
(test user) go to the apple then system preferences then accounts then in the bottom right hand corner you will see there is a lock click it and put in the password for the computer then click ok then click the plus sign and create the test user make sure that you check the box that says allow user to admin the account then click create account (if a message says something about automatic login click keep) then click the apple and log out then login to the other user.
(smc) you shut the computer down then you unplugg all the cables from the computer then you take the battery out with the battery out you hold the power button down for five seconds then you put the battery back then plug in the ac adapter then start the comptuer up and then plug everything else back in
(pram) you restart the computer holding down the apple option P and R keys till you hear the start up chime twice
if that does not work i would boot to the install disk one holding c and then click utilites from the top and select the mac hd and then verify disk and repair disk
if the issue still occurs then i would back all of the information on the computer up and erase and install
hope this helps

Wireless card in my computer?

Similar Messages

Maybe you are looking for