Wireless card, will this work? What about extender antenna?

I found this on eBay, will it work on a Lombard, or Wallstreet, using OS9? Anybody using one?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=017&item=270011066512&rd=1&sspa gename=STRK%3AMEWA%3AIT&rd=1
Anybody use one of those extender antennas? Which ones would work?
Mac OS X (10.4.3)

sludgedragon,
The WiFi PC cards using the Orinoco chipset is the same chipset used in the original AirPort card (802.11b). According to Apple, if you are running OS 9.2.2, you can install AirPort 2.0.4 and have full compatibility.
http://docs.info.apple.com/article.html?artnum=120120
However, I cannot say the card you referenced from Enterasys with added features and updated firmware will still work with Apple's AirPort software. The ad does say it comes with a CD containing software for all OSes and also various versions of firmware.
It should work just fine on a Wallstreet or Lombard. There is also iOXperts wireless driver which supports it and many other cards.
http://www.ioxperts.com/devices_80211b.html

Similar Messages

Mac Mini, Sonology NAS, And Apple AirPort wireless router, Will this work?

[IMG]http://pic20.picturetrail.com/VOL256/13533814/24272354/405877013.jpg[/IMG]
OK, so my plan is to create a home movie server for the living room and the kitchen as illustrated in the diagram. I Plan on using a mac mini (current generation) as the liaison between the NAS and the receiver. I will install XMBC on the mac mini’s as a movie organizing software. I will use the iPad app to control and select movies from the system. This setup will repeat in the kitchen with the exception that I will connect the mac mini directly to the television in which the audio out will go to a jack which connects to the in ceiling speakers. Will this work? Are there any other suggestions that anyone has to make it more streamline? I also assume that there can be simultaneous movies being watched in both rooms via the NAS. Thanks for all of your comments and help

in theory, yes, but you work network admin may have locked the network preventing this from working

Airport, Airport Express, iPhone & PS3 wireless network will this work?

Hi I need help with the above,
I've got an iMac 15" G4 800Mhz, it is fitted with a standard airport card, the G4 is connected to the internet via ethernet to a Zyxel P-600 Series ADSL modem. I have also been streaming itunes (using airtunes) to a seperate hi-fi amp in another room using an Airport Express Base Station, THIS ALL WORKS.
I have since bought an iPhone and a Playstaion3 (PS3) and want this all to work together but does not. It would seem that the Airport Express Base Station is the dominant part of this network and I want to change this priority. No matter how far I delve I cannot find the answer. Basically I want the following setup:
iMac G4 (with Airport Card) that is connected to the internet via ethernet to be the 'main Base Station' (not the Airport Express as is currently), I then want to continue streaming Airtunes to the Airport Express and also use this device as a booster for the wireless network. The reason for the new wireless setup is to enable the iPhone to connect to the Internet (the iphone currently sees the network but cannot connect to the internet because the Airport Express is NOT connected to the ADSL Modem), I also want the PS3 to connect to this network.
Am I asking too much of the Airport Card (The one in the G4)? or should I simply buy the new Airport Extreme Base Station and start again?
Any help would really be appreciated, Paul

sorry if i sound stupid but does that mean that if i'm using the AX to stream music (using Airtunes) I cannot simultaneously use it as a wi-fi extender?
That situation is possible.
If so can I set up the AX to just stream music and then use an Airport Extreme Base Station hard wired to the ADSL Modem and the iMAc and connect the iPhone and PS3 to the internet via the AEBS wi-fi network. Essentially creating one wi-fi network for iPhone/ PS3 wireless connection and a seperate Airtunes network for wireless music streaming, or am I just dreaming, cheers for your help.
Sure you can do that. But then you will have to decide if you want to stream music OR you want to be on the internet. Your computers can't connect to both at the same time.
You probably want to do the above, but configure your AX to join the wireless network provided by the AEBS. Then you will only have a single wireless network and you can stream music, print, and surf the internet all at the same time.

HT1515 wall ethernet port -cable- airport express 802.11n WAN port/airport express 802.11n LAN port -cable- non wireless PC. will this work?

i need to keep my PC connected (by cable) to the internet, can i connect my AirPort Express to the port in the wall and then connect my pc the the Airport Express. eg.
(wall port (-cable-) [WAN)(LAN] (-cable-) ethernet port on my pc). Bold is the airport express itself.
Trying to get my ipad mini connected.
Because this is a work ethernet connection, i dont want to go poking around too much.
Thank you.

in theory, yes, but you work network admin may have locked the network preventing this from working

I have a 2009 Mac mini and the wireless card has never worked, would I be able to cover it with my three year extended warranty?

I have a 2009 Mac mini and the wireless card has never worked, would I be able to cover it with my three year extended warranty?

matthewfromwhangarei wrote:
I have a 2009 Mac mini and the wireless card has never worked, would I be able to cover it with my three year extended warranty?
If you mean AppleCare, then I would believe the answer will be yes.
First make sure you have a full backup of everything on your Mac, then run, don't walk to your nearest Apple store.
Note: Due to your Mac now being in computer years, somewhat elderly, Apple may not have the require parts in stock. This will either mean you might have to leave it with them for a number of days, or maybe they will offer you a new Mac mini. While a new Mac mini (if offered) might be a welcome possibility be aware that the new Mac mini no longer has a CD/DVD drive and it comes with Mac OS X Lion and as a result might not run some of your old software.

Want to buy airport extreme, am using mountain lion. Will this work ? also, my house is 5,500 square feet all on one floor. Do I need an extender and which one?

want to buy airport extreme, am using mountain lion. Will this work ? also, my house is 5,500 square feet all on one floor. Do I need an extender and which one?

... If I purchase an express to extend is it hard to configure as an extender?
No, AirPort Utility prompts you with step-by-step questions and makes configuration simple.
The Express and Extreme have the same transmitter power specifications, so I suggest the $99 Express as an extender, should you need one. Beware that you cannot add a second Express to wirelessly extend the network any further - as the following excerpt from Extending the range of your wireless network by adding additional Wi-Fi base stations explains:
Extended network range considerations
In the above example the primary Wi-Fi base station ➊ is out of wireless range of the extended Wi-Fi base station ➋, therefore the extended Wi-Fi base station cannot join or extend the wireless network. The extended Wi-Fi base station must be moved to a location that is within Wi-Fi range of the primary Wi-Fi base station.
Important Note
If another extended Wi-Fi base station ➋ is placed between the primary Wi-Fi base station ➊ and the extended Wi-Fi base station ➌, the extended Wi-Fi base station ➌ will not allow clients to join it. All extended Wi-Fi base stations must be in direct range of the primary Wi-Fi base station.
A "roaming network" that Bob described, in which all base stations are connected with an Ethernet cable, is by far the best alternative.

I have a company BB which is terrible and want to buy a 3GS and use my BB SIM card in the iPhone. Will this work?

I have a company BB which is terrible and want to buy a 3GS and use my BB SIM card in the iPhone. Will this work?

Depending on the model of the Blackberry & the carrier.
if the blackberry didn't have 3G or a 3g sim card (depending on the carrier), then the SIM is probably too old to use and would require a new SIM.
The data plans on some carriers specify a blackberry data plan and an iPhone data plan, and they are not interchangable, so the carrier would have to switch that.
Usually since iphones come with a SIM preinstalled, some carriers may tell you the SIM card can't be transferred between an iphone and another device.

OS X lion USB Thumb Drive - will this work on new Mac Mini or MBA (2011)?

Hi All,
Not to be confused with the other similar posts, I am interesting in only clarification of what build comes with the USB Thumb Drive now available on Apple Store - will this work with new MBA and Mac Mini?
Thanks,

KeanuReeves wrote:
From what I have read about the usb installer, it is not intended for you to try booting from the stick after wiping your hard drive. You are to click on the installer
You may be correct, but this statement is quite confusing in that context:
Important Note
When you install OS X Lion using the USB thumb drive, you will not be able to reinstall OS X Lion from Lion Recovery. You will need to use the USB thumb drive to reinstall OS X Lion.
So, if the Thumb drive is supposed to take the part of the Recovery partition, it seems that it should be able to boot. However, the license agreement still requires an Apple computer running Snow Leopard, so maybe it isn't bootable.

Will this work to determine the system byte order?

I need to be able to determine, preferably without relying on conditional disable symbols, whether the system on which a VI is run uses big-endian byte order. What I came up with was to flatten a U32 containing 0xDDCCBBAA to string using the unknown system byte order, and unflatten using a big-endian byte order. If the pre- and post-flattening U32's are equal, the system must be use big-endian byte order. Two questions:
1. Will this work? It recognizes, correctly, that my PC does not use big-endian byte order, but I don't have any big-endian targets to test it out on (see #3).
2. Is there a better way? Perhaps something already built into LabVIEW?
3. Would somebody with a big-endian target verify that my VI detects it as big-endian?
Thanks,
Mark Moss
Attachments:
Detect Big-Endian System.vi ‏8 KB

You can simplify your VI a little. Since you know what the result of the string flattening should be in big endian, just compare the string.
Attachments:
Detect Big-Endian System 2.vi ‏7 KB

Switch to 2X Xeon 5680 6-core, Will this work?

Hello
My current set up of a 8 core 2.26 Xeon mac pro (Early 2009) has been giving me insufficient power for what i need to do. I am not willing to pay for the apple upgrade to only 2.93 for an 8 core, so I am considering upgrading to two six core 3.33 GHz Xeon X5680's, or two six core 2.93 GHz Xeon X5670's. (I chose those because i'm guessing two i7 980 processors won't fit on a Xeon board). Totalling 12 cores.
The question comes down to, will this work, will the processor fit in the socket? If so, what is involved, what risks are there, what changes would need to be made? Would it work on OS X, or would it only run under windows, etc? Or would it not even work at all?
(And i'd rather not buy a PC with that money.)
Thanks
-C

A single 6-core 3.33GHz w/ 3 x 8GB RAM, 4 hard drives, ATI 5870.
http://www.apple.com/macpro/specs.html
Mac Pro 2010 Configuration
Even the Apple Store Special has had the stock 2009 2.66GHz $2149 which can be an excellent value and investment. Very slim pickings lately, that could change after the 9th.
http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro
My 4 yr old Mac Pro doesn't feel any slower or the worse and maybe better than it did originally.
A ton of info on buying, performance, and strategies and how to optimize for photography and other applications:
http://macperformanceguide.com/
Some benchmarks of the newest iMac and others:
http://www.barefeats.com/mbpp16.html
http://www.barefeats.com/imac10g.html
http://www.barefeats.com/imac10c.html
http://www.barefeats.com/imac10.html
http://www.barefeats.com/imi7.html
http://www.barefeats.com/nehal17.html
http://www.anandtech.com/mac/showdoc.aspx?i=3597&p=11

HT4623 I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

Also i forgot to add after a night of searching how to turn the Epson Workforce 435 printer into Airprint friendly and not iPrint (which are 2 completely different things) i donwloaded a program called (AirPrint Activator) from HandyPrint. The link is below to download the software. Once i installed the application i set my printer to be shared over my Home Network (Wi-Fi Network). Once you have done that, open the AirPrint Activator application you have just downloaded, swtich it ON from OFF mode, and then you should easily see your printer name in my case EPSON Workforce 435 and then just close the application. Then go to your IOS Device like your iphone/ipad/ipod touch select a picture that you want to test print or even an attached PDF from your email, and select Print in the share button. You will then be prompted to select your printer. Your printer you automatically be recongised then just select print. And now you have a complete AirPrint ready printer with a Printer that doesnt even support the function. Im sure you can do this to all Wireless Printers, even if they came out before Apple AirPrint service launch.
And also if you still need guidance and a video to follow from just click the Youtube link below
http://www.youtube.com/watch?v=9r75m_VUr0E
Download AirPrint Activator Link
http://netputing.com/handyprint/
I hope that this helps your question and enjoy your day
Kind Regards
Ahmed

Wireless mouse will not work at the top of the page on ANY website while running Firefox 7.0.1

I am currently running Firefox 7.0.1 and have not had many problems until today. I have noticed that my wireless mouse will not work at the top of any website. This means I cannot log into many sites. I have also noticed that during page downloads, I have to move the mouse in order for the page to load or it just pauses. Any help would be appreciated!

If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Se also:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

New Hard drive, will this work?

Hey guys, just found this stuff, will this work in my 2.0 white macbook? Just wondering, thanks!
http://welovemacs.com/sata160gb.html
Also, to be compatible with my setup, what are the requirements? Just 2.5 and 9mm? thanks!

nope, i'm pretty sure that the macbook harddrive is 2.5 and that one says that it is 3.5

Transferring iPhone backup from PC to Mac - will this work?

Hi,
I recently purchased a MacBook Pro and am almost done with transferring everything from my PC to my Mac after a long full day and a half of backing up, reformatting external hard drives etc.
I have read to transfer an iPhone backup from PC to Mac you need to do the following:
If you are a Windows user, open the Start menu, click on "Computer" and then navigate to the "C:\Users\user\AppData\Roaming\Apple Computer\MobileSync\Backup" directory.
And then:
Click on the "Finder" icon and navigate to the "Macintosh HD/Library/Application Support/MobileSync/Backup" folder on the Mac.
I did the first step just fine, but when I tried to find the folder on the Mac by both manual navigation and then a spotlight search, it wasn't found, so I went into the Library/Application Support and then created a new folder with the name MobileSync and a subfolder 'Backup' within that. Will this work?
If not, could someone please help me on how to get my iPhone backup onto the Mac.
Thankyou!

Hi this username has already been taken,
If you are looking to migrate all of your files from your Windows machine to your Mac prior to resyncing your iPhone, you may find the steps outlined in the following article helpful:
Switch Basics: Migrate your Windows files to your Mac
http://support.apple.com/kb/ht2518
About Windows Migration Assistant
http://support.apple.com/kb/HT4796
If you would like to separately copy or back up your iPhone's iTunes backup file for safe keeping prior to the transfer, you may also find the information in this article useful (under the section Where are iTunes backups stored on your computer):
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
Regards,
- Brenden

Will this work with my Macbook/ Macbook Pro

I'm asking this question in a vague enough way that the answer will at least help people with their questions
1) I have a first-gen Macbook. Will this work and/or what adapters will I need for the monitor
2) I have a Macbook Pro, most recent before this refresh. Will it work with the monitor and/or what adapters will I need for the monitor

None of the new models released this week have any sort of DVI port. They all use a new graphics port called the Mini DisplyPort. This port does not adhere to the DVI standards because it is a new standard in itself. Google DisplayPort and you can find some technical info on it.
Apple has said that this will become the graphics port on all of its products in the future.
K

Wireless card, will this work? What about extender antenna?

Similar Messages

Maybe you are looking for