Wireless comm problem with time capsule or airport extreme using iMac G5

I did buy a Time Capsule and an iMac 20" G5 January 2009...Installed all the components and created a wireless network...MacBook, iPhone and iPod Touch connected perfectly...iMac connected but started to drop communications with Time Capsule...Safari, iTunes and other internet-access programs had problems to connect 100% with the web...After reviewing all the post here and "testing/trying" several parameters, I found out that you need to define a WPA/WPA2 password protection with more than 13 characters...FYI, Time capsule is configured using 802.11n (b/g compatible)...

Further to Bob's comments..
A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

Similar Messages

  • Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

    Hello -
    I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
    I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
    I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
    Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
    Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
    Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
    Thanks a lot,
    -TM
    AirPort Exteme:
    Time Capsule:

    Hello JuliaApple. Welcome to the Apple Discussions!
    You have several ways to configure both base stations for what you are trying to do.
    The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

  • Airtune Over Ethernet  with Time Capsule or Airport Extreme

    Can the previous generation Time Capsule or Airport Extreme bridge an ethernet client to an Airtunes network?
    Current Setup: I have an aluminum iMac wired to my Time Capsule; currently, I use the aluminum as a music server by connecting to several Airport Express clients over the the iMac's built-in Airport for Airtunes support.
    Problem: I have 3-802.11g clients dragging my wifi network. I would like to dedicate the iMac's internal network to the g-clients so I don't have to use compatibility mode for my n-network. However, I will lose Airtunes speaker support when I use internet sharing over the built-in Airport. Airtunes does not appear to support the Time Capsule ethernet client.
    Nodes:
    -AE 802.11g (Airtunes only)
    -AE 802.11n (Airtunes and USB printer)
    -1st gen Time Capsule (Internet gateway, "creating network" 802.11 g/n,
    -iMac 8,1 (Music server via internal wifi, wired TC client)
    -Macbook 4,1 (wifi client)
    -iPhone
    -Canon MP620 (USB to iMac, wifi to Macbook)

    Further to Bob's comments..
    A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
    The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
    Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
    In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

  • Troubling extending wireless network with Time Capsule and Airport Extreme

    I am trying to set up and extend a wireless network in my house, but it’s not working right. I have two Airport/Capsule units in the house:
    2TB Time Capsule (Dual-Band II)
    1 Airport Extreme (Dual Band)
    I have the Verizon Fios router as my gateway to the internet, and also as my DHCP server. I have also tested the ethernet ports in my house to verify that they work, and that I can get a DHCP-issued IP address.
    Now, my Verizon router has WiFI, and it’s still on. I am not using it though except to troubleshoot. So far as I understand, this should not cause a problem.
    Base station setup
    So I setup the TC to Create A New Wireless Network, on the ethernet network it’s on (Dlink switch plugged into Verizon router). I set it up in Bridge Mode (as opposed to having it dole out IPs, since the Verizon router does this already). The TC gets a valid IP, and my wireless device connect to it without a problem. I have checked “Allow this network to be expanded” under Wireless settings.
    Extended station setup
    The AE Dual-Band is plugged into the Ethernet, and is reset to Factory Settings. I name it “Airport Extreme 2” and I chose “I want Airport Extreme to join my current network.” The other two options are: “I want to create a new wireless network” and “I want to replace and existing base station or wireless router with Airport Extreme.”
    I chose to “join,” I select “I want to connect Airport Extreme to my network using Ethernet to extend my existing wireless network.” The other options are to disable wireless entirely, or to “wirelessly join my current network.” On the next page it asks me to select the device or network that the Airport Extreme will connect to using the Ethernet. I set it to the Time Capsule.
    Results:
    Access near the Airport Extreme 2 is incredibly slow. Speedtest shows I am getting less than 1Mbps. Worse yet, my mail client won’t connect. It just times out.
    What I had hoped was that the AE would connect via Ethernet to the network, and just bring the wireless network to the other side of the house. Instead it almost seems as though it is just re-amplifying the TC’s signal. Otherwise, why is performance so bad?
    Thanks to anyone with some insight here!

    Hello Kennuff. Welcome to the Apple Discussions!
    Since you have the ability to connect all of the routers by Ethernet, there is no need to configure the Time Capsule (TC) & 802.11n AirPort Extreme Base Station (AEBSn) for a dynamic WDS (aka, extending a network). This option is only when the routers do NOT have an Ethernet connection between them.
    Instead, you want to configure the TC & AEBSn in a "roaming" network. I suggest starting by performing either a "hard" or "factory default" reset on both.
    Next be sure that both the TC & AEBSn are on the same Ethernet subnet coming from the Verizon-supplied router.
    Configure the TC & AEBSn as follows:
    AirPort Utility > Select the TC or AEBSn > Manual Setup > AirPort > Wireless
    o Wireless Mode = Create a wireless network
    o Allow this network to be extended: <not checked>
    o Radio Mode: <leave the default or if you require a specific mode make sure both routers are configured the same>
    o Wireless Security: <configure both routers the same>
    AirPort Utility > Select the TC or AEBSn > Manual Setup > Internet > Internet Connection
    o Connection Sharing = Off (Bridge Mode)

  • Poor internet speed with time capsule or Airport extreme

    I'm trying to find away to increase the throughput of my 1st generation tme capsule. i'm getting a 33% drop in speed over wireless compared to wired conncetions.
    current setup
    Virginmedia XXL broadband  100Mbit down  5Mbit up.
    Modem standard virginmedia modem (not the superhub) connected to Apple time capsule (500Mb) @ 1000Mbit full duplex
    time capsule reset to default and then configured to use 5Ghz band, channel 36 . (no other networks in the area using this band) tested using wifi scanner and istumbler
    tested down/up speed using www.vmspeed.com
    wired connection
    105Mb/sec download   4.9Mb/sec upload
    wireless connection
    73.14Mb/sec download   4.7Mb/sec upload
    i have tried testing with an airport extreme 3rd Gen with the same setup and get the same results.
    Tested using a 2008 Macbook running Lion 10.7.3 and also tested using 2010 Macbook unibody running snow leopard 10.6.8. both laptops connecting to wireless network at 270Mb/sec and are both exhibiting the same drop in speed over wireless. only one laptop connected to the network at a time.
    is thier a limit to the time capsule/airport extreme wireless throughput?

    Further to Bob's comments..
    A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
    The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
    Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
    In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

  • Apple TV Inference with Time Capsule and Airport express?

    I have recently bought an Apple TV 2, which seem to be working fine, however since installing it on my wireless network both my Time Capsule and Airport Express can't be found. Following some fault finding it seems that when I unplug the Apple TV I can reconfingure the TC and AE.
    The TC and AE are configured to join my existing network....and have happy sat there for a few years.
    I would really welcome any ideas.
    Thanks
    R

    Welcome to the discussions!
    It sounds like you have the basic configuration covered correctly.
    You might want to check some settings on the TC:
    Wireless Mode would be create a wireless network
    "Allow this network to be extended" should be checked
    The AX should be set to "extend a wireless network"
    The "allow wireless clients" box should be checked
    In this configuration, the ethernet port on the AX is active so things should work.
    A minor point...Although the TC is a dual band device, the AirPort Express is not. Can you make sure that that the Express is connecting to the "main" network on your TC? The "guest" network cannot be "extended".
    If you place your laptop close to the Express and hold down the option key while you click on the AirPort icon, some connection information will be displayed. The MAC address of the device that the laptop is connecting to will be indicated. Make sure that that this is the MAC address of the AX, and not the TC.
    Another note...If you have not changed the default "main" network, the radio mode is broadcasting 802.11n only at 5 GHz. These higher frequencies are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals. So, if you AX is some distance away, you may not be receiving a strong signal for the device at that location.
    If you have a signal strength utility on your laptop (the "bars" at the top of the screen are not a very good indicator of actual signal strength), turn off the AX and take a reading to see what kind of signal the Express is receiving where it is located.
    Please post back with your results.

  • Should I get a Time Capsule, an Airport Extreme, or a Linksys Wireless N?

    Hi I have several questions before I make my purchase. I've got 2 computers in my upstairs bedroom that are wireless. I currently have a Wireless router which is a Linksys WRT54G.
    It's already getting on in age so I was thinking of replacing it with a better wireless router. I'm deciding weather I should go with a Linksys N or go the apple route.
    Will I get faster internet if I go with a Linksys Wireless N? What is the difference between G and N?
    I was thinking of getting a Time Capsule because I wanted an automatic backup of my data.
    Is a time capsule going to perform the same as a Linksys? Which router is better?
    what is the difference between Time Capsule and Airport extreme. Are they basically the same with the only difference being the hardrive?
    If I get a Time Capsule then do I still need a Linksys router? Is it easy to setup a wireless network using a Time Capsule or Airport Extreme?
    Last question. My mom's computer upstairs uses a Linksys Wireless G usb adapter. It is also getting on in age.
    The connection is always labeled as low and sometimes she can't go on the internet. What would be a much better wireless adapter for my mom's computer?
    Any help is greatly appreciated.

    Stuart Lawrence wrote:
    Hi I have several questions before I make my purchase. I've got 2 computers in my upstairs bedroom that are wireless. I currently have a Wireless router which is a Linksys WRT54G.
    It's already getting on in age so I was thinking of replacing it with a better wireless router. I'm deciding weather I should go with a Linksys N or go the apple route.
    Will I get faster internet if I go with a Linksys Wireless N? What is the difference between G and N?
    Enough of a difference for it to be worthwhile.
    I was thinking of getting a Time Capsule because I wanted an automatic backup of my data.
    The backup app is Time Machine, not Time Capsule. TM can work with any external HDD connected to the Mac, but only TC is officially supported for wireless backups by Apple. Hacks are possible to connect a USB HDD to an Extreme.
    Is a time capsule going to perform the same as a Linksys? Which router is better?
    Better if we are talking N vs. G.
    what is the difference between Time Capsule and Airport extreme. Are they basically the same with the only difference being the hardrive?
    Yes, but that is a significant difference.
    If I get a Time Capsule then do I still need a Linksys router?
    No.
    Is it easy to setup a wireless network using a Time Capsule or Airport Extreme?
    If you can setup your Linksys, you should be able to setup the AirPort as well.
    Last question. My mom's computer upstairs uses a Linksys Wireless G usb adapter. It is also getting on in age.
    The connection is always labeled as low and sometimes she can't go on the internet. What would be a much better wireless adapter for my mom's computer?
    Sorry, none off the top of my head. Maybe you can provide the details on the computer she has.

  • Problem with Time Capsule after backup session

    I have a problem with Time Capsule after a backup session. Our two Macs (on Maverick) loose connection with the station and the only thing that seems to help is unplugging the Time Capsule  and starting it again! After the next backup session the same thing happens again. The Macs seem not to be able to hold on to the connection and continually loose it.  The iPhones and iPads that we have (4 units) are not affected - it is the Mac Mini and Mac Powerbook that experiences this problem!
    I would be grateful for your help!
    Thor

    This is standard Mac issues and has been a bug floating around since Lion.. it hits some people worse than others.. but once it starts it is awful hard to get rid of.
    Just to confirm the connection to internet is not a problem?? Just the hard disk drops out?
    I recommend you
    1. Reset the TC to factory.. and start over with all new names.. short, no spaces pure alphanumeric.
    TC name and wireless name/s should conform. By default the disk share name is data which is fine.
    2. Mavericks has changed over from using AFP to SMB for network filesharing.. why Apple why??
    This is unhelpful to say the least. Many many people are struggling with TC and being unable to mount the network drive.
    So do it manually and force it back to AFP.
    In Finder use top menu, Go, Connect to Server.
    Type AFP://TCname or TCIPaddress (it must be the network name of actual TC.. or its IP address)
    When the computer locates the resource it will ask for a password.. it is public by default.. supply your password or public and save it in the keychain.
    3. Delete the existing TM setup and start over.. See A4 here. http://pondini.org/TM/Troubleshooting.html
    I cannot promise this will fix it but should reduce the problem to now and then.. rather than every time TM needs to backup.

  • Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad "/Volumes/Data/MacBook Pro de Carlos.sparsebundle" ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.

    Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad “/Volumes/Data/MacBook Pro de Carlos.sparsebundle” ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.

    Try Here  >  http://pondini.org/TM/Time_Capsule.html
    Perhaps P 2  >  Time Machine could not complete . . . sparsebundle could not be accessed. (Error 109).

  • Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone?

    Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone.
    I would like to strem movies from the hard drive to iphone.
    I have already seen the Goflex Stellite, which works this way.
    Is there any other device that could do this?

    I did a typo. My current computer is a 2010 1/2 iMac.  The stand alone monitors are still out of my price range so I'm looking for other options. By buying an external hard drive and a broken iMac, I'm still ahead. Still, if I understand you right, the 27" 2010 and earlier iMacs  would be possiblities.
    Are there adapters that would allow me to run a 2011 and newer iMac as an external monitor from my 2010 1/2. There are so many adapters out there these days.

  • Since I upgraded to 10.7.2 lion I have these problems with Time Capsule. What is the problem? thanks

    since I upgraded to 10.7.2 lion I have these problems with Time Capsule. What is the problem? thanks

    Unable to access disk image backup "/ Volumes / Time Capsule / iMac Admin. Sparsebundle" (error -1).
    Then?????

  • Time capsule and airport extreme!!! or something else?

    Hi
    i have been looking into a new wireless device but do i really need a time capsule or a Airport extreme or is there something better out there?
    thanks

    Thanks for the additional info.
    The AirPort Extreme would support a hard drive, but unfortunately Time Machine backups are not supported by Apple to a drive at the USB port of the AirPort Extreme, so to meet both of your requirements, you would need to look at either the 1TB or 2 TB versions of the Time Capsule.
    In addition, either the Time Capsule (or AirPort Extreme) would provide you with simultaneous dual band wireless capability, so you'll have a 5 GHz band for faster, newer devices and and a traditional 2.4 GHz band for slower devices. With this type of setup, the slower devices will not slow down the faster devices on your network.
    There's a Guest Network feature as well if you plan to use the Time Capsule or Airport Extreme or Time Capsule as the main router on your network.

  • How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    You can direct connect your MBA to the LaCie via USB 2 cable.  If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it.  Time Machine can access it either way.

  • What is the default ip address for the Time Capsule and Airport Extreme?

    What is the default ip address for the Time Capsule and Airport Extreme?

    Open Airport Utility to find out the real IP address of the network connection. DHCP addresses are assigned by the router in the range chosen in Airport Utility.

  • Suggestions, Observations and problem with Time Capsule shares

    *Some Observations*
    The Time Capsule can take a long time to become active. This is especially true if using an extended or WDS network. I would suspect this is due to the negotiation between devices that it needs to do. I have on occasion believed it to be hung, only to find that after walking away for a bit it comes up. This also impacts devices showing up in the Airport utility.
    Using a time capsule with one Airport Express B/G will work, but adding a second creates problems.
    Extending a network with an Airport Express N seems to work well.
    Best bet is to set up separate B/G and N networks and run your N network as N only at 5Ghz.
    WEP provides no real security, so think of it as you would an open network.
    *My Issue*
    I am having an issue where the time capsule shares become unavailable. It is an intermittent issue, and I have been unable to identify a test case. This happens for devices connected over ethernet as well as wireless. The Time Capsule shows in the Finder list, but the volumes are not available. Connecting to them fails.
    The device also appears in the Airport Utility list, but when clicking on Manual Setup, or guided set up, it causes a hang.
    This results in Time Machine hanging when trying to initiate a backup.
    I have also noticed that when this happens, the signal does start to get a bit flaky with "Roam (Beacons Lost)" messages. Wireless connectivity still seems to be very useable though. I can connect to other network shares through the Time Machine, but not to the shares on the Time Machine. The only way to recover from this is to power cycle the Time Capsule.
    One thing I want to investigate more tonight is whether there are any issues with my keychain and old passwords in case there are multiple failed attempts in the mix that are doing something. Although I know of no lockout feature on the device.
    Any suggestions would be appreciated. This is the second Time Machine, so I have seen this on two different devices. I am also seeing this issue across 4 different computers simultaneously, some via ethernet and some wirelessly. Time Capsule is 7.3.2

    Hi,
    I have pretty much the same problem, 1TB Time Capsule that works fine most of the time as a wireless router. Up till recently Time Machine backups just worked (as one would expect them to) wired and wireless. I went away for a week came back and now every time Time Machine invokes a back up process all of a sudden my wireless network goes down, Time Machine can no longer see the Time Capsule and all other devices (iphone / apple TV other non apple devices) no longer have connections (they see wireless but no pass through to the internet or each other).
    I have tried resetting all sorts of stuff, re-deployed my network, changed IP / LAN settings to make it less complex, Yasu'd my mac, connected only via wires, cleaned out my keychain etc etc and still get the same problems and as per Chris's point airport utility also hangs and the only solution is rebooting the time capsule.
    I am fairly frustrated with this! any suggestions / help would be gratefully accepted.
    thanks
    alex

Maybe you are looking for

  • Issues with Analysis Authorization on Infoset

    Hi all We are facing an issue with Analysis Authorization on Infoset, it doesnt seem to throw authorization error when we access a record that is outside the authorization. We tried to use the same authorization set up from the same user we try to ac

  • SMB connection to Windows 2008R2 File Server Problem

    Hello, I recently migrated a file server from Windows 2003 to Windows 2008R2.  Since the migration, I can no longer use our Canon multi-function printer to scan documents to a network share on the new file server.  The share has Everyone, System and

  • Handling Dropdown values in Webdynpro ABAP

    Hello All, i have a Dropdown list in my screen which is having values SAP ABAP WebDynpro. am able to display these three values on the drop down using a method POPULATE_DROPDOWN. Code i have used here: method POPULATE_DROPDOWN .   DATA: it_value_set_

  • PR Release Strategy-Characteristic Z_GSWRT must be linked with CEBAN-GFWRT

    Dear Experts, I did a simple config for PR Release strategy. using Plant(Z_WERKS) and Item values(Z_GSWRT ) chose overall PR Release. During simulate release the second level release its not able to simulate and it says check Prerequistie for second

  • I continually get an Adobe Flash Player error #1009.

    If some out there can assist me with this issue I would really appreciate it.  I have spent hours with HP IT and they tell me that the issue is resolved, but an hour later it is back.  The error message states "Cannot access a property or method of a