Wireless Configuration in MAC OS X 10.6.3

Hi
We are using using PEAP with MSCHAPv2 for our wireless authentication 802.1x
All windows systems are working fine with this. (as we are pushing wireless settings through group policy)
Now we want to configure same in MAC OS systems. We already added MAC system in domain.
When we try to configure wireless manually its not giving option to select encryption type and also its asking user name and password.
Our wireless will authenticate with our computer certificate it doesn't require any user name and password.
How to configure this in MAC OS ...??? is it possible...??
Thanks in advance
koyasuri

Bump. I am also trying to setup a network with 802.1x authentication based on the machine (Active Directory) account. How do you do this? OS X only seems to want to use a user account.

Similar Messages

  • HP laserjet P1100 wireless connection for mac

    Hoping for a quick response.... I have a Mac with 10.8.5 and I have purchased an HP Laserjet P1100 wireless printer. I have tried installing the drivers to print wireless...ly with no success. I have taken time out to type this message because I have not been able to find someone who has had  the same issue in the internet. I need a walk thru because there are many steps where the issue may be occuring. Your written installation documentation conflicts with your User Guide PDF file. Cord or no cord during driver installation for wireless connection???  Was lost after #5 page 18 on the User Guide PDF file.
    I figured it out. Your directions are misleading and not up to date. Cord is not an issue but needed for entire install process. At one point I'm in my system prefs then I'm on my web browser where I  found Bonjour which added the network to my printer choices so now I can print wirelessly... hopefully I don't have to do that again because I'm not sure of the steps I took. Fairly complex set up.

    Hey @matt4,
    Welcome to the HP Support Forums!
    I see that you have a Mac OS X 10.8.5 and a new HP Laserjet P1100 series printer and are looking for quick and easy wireless configuration steps. I just have one question for you:
    Do you have a P1100 or a P1102w?
    What's my Model Number?
    I'm going to assume that you have a Laserjet P1102w. The steps for wireless configuration of a Laserjet P1102w are a bit confusing on Mac OS X 10.8 as you need to use the generic Apple Airprint driver because there is no 'Full Feature Software and Driver' installation for that Operating System. In saying that, I will try my best to give you easy steps to reference should you need to configure your printer again on the wireless network.
    How to Connect the Printer to the Network:
    Step 1: Install the Generic Mac Printer Driver:
    1. Turn your printer on
    2. Plug your USB cable from the printer directly into your Mac
    3. Click on the Apple menu, and then click System Preferences
    4. Click Print & Scan and make sure your printer is in the list of available devices.
    5. If your printer is not listed, click the plus () sign at the bottom left pane, click the name of your USB printer, and then click Add.
    Step 2: Connect the Printer to the Wireless Network:
    I've added the video above so you can view these step-by-step instructions.
    Click the Apple icon (), and then click System Preferences.
    Click Print & Scan.
    Click Open Print Queue, and then click Printer Setup.
    Click the Utility tab, and then click Open Printer Utility.
    Click HTMLConfig.
    Click the Networking tab, and then click Wireless from the list on the left.
    Under Communication Mode, click Infrastructure, select your network SSID from the Available Network Names (SSID) list, and then click the << button.
    From the Security Mode pop-up menu under Authentication, click WEP or WPA/WPA2. Your selection depends on the wireless security protocol your network uses.
    Note: If your network does not have wireless security, leave the Security Mode set to Open System (No Authentication).
    Type your WEP/WPA/WPA2 key in the appropriate field, and then click Apply.
    In the confirmation box, click OK, and then close the HTML Config and Print Queue windows.
    Step 3: Delete the USB connected printer, and then add the wireless connected printer:
    In the Print & Scan window under Printers, click your printer name, and then click the Minus sign () to remove it.
    NOTE: This removes the USB connection from the list so that the only entry for your printer is the wireless connection.
    Disconnect the USB cable from the printer and the computer.
    Under Printers, click the Plus sign ().
    Select your printer name with Bonjour as the Kind, and then click Add
    Once your printer is configured for Bonjour, if you have other Mac OS X computers that you want to use with this network printer you do not have to run all these steps again. You simply make sure that the other Mac computers are all connected to the same network that you have set your printer up on and just open Print & Scan. Under Printers click the  () plus sign and select your  printer name with Bonjour as the Kind, and then click Add.
    You can reference all of this information in: Setting Up the Printer for a Wireless Network for the HP LaserJet Pro P1102w Printer
    Let me know if these steps help clear up any confusion for you. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • How to look up a wireless client via MAC address

    One of my AirPort Expresses shows a wireless client whose MAC address I don't recognize. Is there some utility that will show me info (manufacturer, etc) of a wireless MAC address?
    Also, under what conditions would one choose to set up the Wireless Mode of an AirPort Express (Extreme) to "Extend a wireless network" and when would you choose "Participate in a WDS network"? The help files don't explain this stuff very well.

    If the "g" Express is set to "join", it does not extend the wireless signal, it receives the wireless signal as if it were a computer. The idea behind "join" was to provide a means for users to stream AirTunes to a remote location with an amplifier and speakers.
    If you are not using it to stream AirTunes, there's really no reason to have it powered on. As you have probably discovered, the ethernet port on the "g" Express is not active.
    You'll need to recheck some settings on your main base station, the Extreme to make sure that it is setup correctly. Open AirPort Utility, click Manual Setup and click the Wireless tab below the icons. Just make sure that there is a check mark next to "Allow this network to be extended". Update to save any changes.
    The "n" Express should be configured using AirPort Utility, Manual Setup, Wireless tab. Check that your Wireless Mode is "extend a wireless network" and make sure there is a check mark next to "allow wireless clients".
    As you have discovered, the ethernet port is also active on the "n" Express when you have it set to "extend" and it will also stream AirTunes. Great features on the "n" Express.
    You might think about adding another "n" Express to extend to another area.
    Ethernet is always the best choice for speed and stability if you are able to hide the wire through the house. If it's not feasible to run an ethernet cable, take a look at ethernet powerline adapters.
    You would use a pair, one device at the Extreme end and one at the other end where you want the signal to go. These devices use the home wiring to transport an ethernet signal and they work very well. Not quite as good as straight ethernet, but close and far better than wireless overall.
    I bought a pair from DirecTV to setup the On Demand service because I didn't want to crawl through a hot attic to run an ethernet cable from my office router to the DVR. Much faster than wireless...and I previously had a very good wireless connection between my Time Capsule and the Express I was using to extend.
    Hope you get things figured out soon.

  • Backing up and restoring wireless configurations

    I am getting ready to blow away my iBook and do a fresh install of OS X. I use my iBook in a variety of different areas and have it setup on several WEP and WPA protected networks. Basically, I'd like to be able to backup my wireless configurations and restore them once I reinstall the OS.

    I would assume it's the com.apple.airport.plist in you user Library>Preferences folder (network locations/preferences are user specific). Drag it to the desktop and restart Airport. Are your various locations there? No? Then that's it.
    John

  • HT202157 how do I configure my mac book air with apple tv

    how do I configure my mac book with apple tv

    Setting up Home Sharing for Apple TV (2nd & 3rd generation)

  • Want to use an iPod photo configurated for Mac on a PC

    I want to use my old iPod photo (configurated for Mac) on a PC (but do not need to keep my songs and photos). Is this possible? If so, what do I do?
    iMac G5   Mac OS X (10.4.8)   iPod 5th generation 60 GB

    If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. Macs can read Windows drives so you could restore and format the iPod on a PC, this would also mean any future software updates would have to be done on Windows. This will erase your drive so you need to have your songs and photos backed up. Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance gets good reviews and has the functionality to let you copy content from the iPod to the PC. Not sure if it does photos but have a look: XPlay 2
    You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

  • Wireless configuration for HP OfficeJet 6500A plus All-In-One printer on Ubuntu 10.04

    I have bought a HP OfficeJet 6500A plus All-In-One printer CN557A, which I want to use with ubuntu 10.04 64-bit as a wireless network printer.
    Before i bought i checked compatibility on www.hplipopensource.org and www.openprinting.org, and all was in order.
    The machine is autodetected and fully functional when connected with a usb cable, but i have not managed to get it to work as a wireless printer.
    This is what I did:
    I configured the printer on the wireless network (through the printer interface), and it connects. It prints out a "Wireless Network Test Report", and everything works. I can ping to its local ip adress, and access it through the browser. HP eprint also works.
    I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognise the device.
    I ran 'hp-check', which gave no errors or warnings:
    tjoff@mek-403-jakbo-01:~$ hp-check
    HP Linux Imaging and Printing System (ver. 3.11.10)
    Dependency/Version Check Utility ver. 14.3
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    Note: hp-check can be run in three modes:
    1. Compile-time check mode (-c or --compile): Use this mode before compiling the
    HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
    are installed to successfully compile HPLIP.
    2. Run-time check mode (-r or --run): Use this mode to determine if a distro
    supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
    has the proper dependencies installed to successfully run.
    3. Both compile- and run-time check mode (-b or --both) (Default): This mode
    will check both of the above cases (both compile- and run-time dependencies).
    Saving output in log file: hp-check.log
    Initializing. Please wait...
    | SYSTEM INFO |
    Basic system information:
    Linux mek-403-jakbo-01 2.6.32-35-generic #78-Ubuntu SMP Tue Oct 11 16:11:24 UTC 2011 x86_64 GNU/Linux
    Distribution:
    ubuntu 10.04
    Checking Python version...
    OK, version 2.6.5 installed
    Checking PyQt 4.x version...
    OK, version 4.7.2 installed.
    Checking for CUPS...
    Status: scheduler is running
    Version: 1.4.3
    error_log is set to level: warn
    Checking for dbus/python-dbus...
    dbus daemon is running.
    python-dbus version: 0.83.0
    | COMPILE AND RUNTIME DEPENDENCIES |
    note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
    note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
    Checking for dependency: CUPS - Common Unix Printing System...
    OK, found.
    Checking for dependency: CUPS devel- Common Unix Printing System development files...
    OK, found.
    Checking for dependency: CUPS image - CUPS image development files...
    OK, found.
    Checking for dependency: DBus - Message bus system...
    OK, found.
    Checking for dependency: gcc - GNU Project C and C++ Compiler...
    OK, found.
    Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
    OK, found.
    Checking for dependency: libcrypto - OpenSSL cryptographic library...
    OK, found.
    Checking for dependency: libjpeg - JPEG library...
    OK, found.
    Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
    OK, found.
    Checking for dependency: libpthread - POSIX threads library...
    OK, found.
    Checking for dependency: libtool - Library building support services...
    OK, found.
    Checking for dependency: libusb - USB library...
    OK, found.
    Checking for dependency: make - GNU make utility to maintain groups of programs...
    OK, found.
    Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
    OK, found.
    Checking for dependency: PolicyKit - Administrative policy framework...
    OK, found.
    Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
    OK, found.
    Checking for dependency: Python DBus - Python bindings for DBus...
    OK, found.
    Checking for dependency: Python devel - Python development files...
    OK, found.
    Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
    OK, found.
    Checking for dependency: Python XML libraries...
    OK, found.
    Checking for dependency: Python 2.3 or greater - Required for fax functionality...
    OK, found.
    Checking for dependency: Python 2.2 or greater - Python programming language...
    OK, found.
    Checking for dependency: Reportlab - PDF library for Python...
    OK, found.
    Checking for dependency: SANE - Scanning library...
    OK, found.
    Checking for dependency: SANE - Scanning library development files...
    OK, found.
    Checking for dependency: scanimage - Shell scanning program...
    OK, found.
    Checking for dependency: xsane - Graphical scanner frontend for SANE...
    OK, found.
    | HPLIP INSTALLATION |
    Currently installed HPLIP version...
    HPLIP 3.11.10 currently installed in '/usr/share/hplip'.
    Current contents of '/etc/hp/hplip.conf' file:
    # hplip.conf. Generated from hplip.conf.in by configure.
    [hplip]
    version=3.11.10
    [dirs]
    home=/usr/share/hplip
    run=/var/run
    ppd=/usr/share/ppd/HP
    ppdbase=/usr/share/ppd
    doc=/usr/share/doc/hplip-3.11.10
    icon=/usr/share/applications
    cupsbackend=/usr/lib/cups/backend
    cupsfilter=/usr/lib/cups/filter
    drv=/usr/share/cups/drv/hp
    # Following values are determined at configure time and cannot be changed.
    [configure]
    network-build=yes
    pp-build=no
    gui-build=yes
    scanner-build=yes
    fax-build=yes
    dbus-build=yes
    cups11-build=no
    doc-build=yes
    shadow-build=no
    hpijs-install=no
    foomatic-drv-install=no
    foomatic-ppd-install=no
    foomatic-rip-hplip-install=no
    hpcups-install=yes
    cups-drv-install=yes
    cups-ppd-install=no
    internal-tag=3.11.10
    restricted-build=no
    ui-toolkit=qt4
    qt3=no
    qt4=yes
    policy-kit=no
    hpijs-only-build=no
    lite-build=no
    udev-acl-rules=yes
    hpcups-only-build=no
    hpijs-only-build=no
    Current contents of '/var/lib/hp/hplip.state' file:
    # hplip.state - HPLIP runtime persistent variables.
    [plugin]
    installed=0
    eula=0
    Current contents of '~/.hplip/hplip.conf' file:
    [last_used]
    printer_name =
    working_dir = .
    device_uri = "hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW"
    [commands]
    scan = /usr/bin/xsane -V %SANE_URI%
    [installation]
    version = 3.11.10
    date_time = 2011-11-16 14:30:35
    [settings]
    systray_messages = 0
    systray_visible = 0
    [fax]
    email_address =
    voice_phone =
    [refresh]
    rate = 30
    enable = false
    type = 1
    [polling]
    enable = false
    device_list =
    interval = 5
    | DISCOVERED USB DEVICES |
    Device URI Model
    hp:/usb/Officejet_6500_E710n-z?s HP Officejet 6500 E710n-z
    erial=CN16F2402Q05JW
    | INSTALLED CUPS PRINTER QUEUES |
    B-403-271-A4-COLOR2
    Type: Unknown
    Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color
    B403-271-A4-BW
    Type: Unknown
    Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW
    HP-Officejet-6500-E710n-z-FAX
    Type: Printer
    Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
    PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
    PPD Description: HP Officejet 6500 e710n-z, hpcups 3.11.10
    Printer status: printer HP-Officejet-6500-E710n-z-FAX is idle. enabled since 2011-11-16T01:00:45 CET
    Communication status: Good
    | SANE CONFIGURATION |
    'hpaio' in '/etc/sane.d/dll.conf'...
    OK, found. SANE backend 'hpaio' is properly set up.
    Checking output of 'scanimage -L'...
    device `hpaio:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
    | PYTHON EXTENSIONS |
    Checking 'cupsext' CUPS extension...
    OK, found.
    Checking 'pcardext' Photocard extension...
    OK, found.
    Checking 'hpmudext' I/O extension...
    OK, found.
    Checking 'scanext' SANE scanning extension...
    OK, found.
    | USB I/O SETUP |
    Checking for permissions of USB attached printers...
    HP Device 0x5412 at 002:005:
    Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
    Device node: /dev/bus/usb/002/005
    Mode: 0664
    | USER GROUPS |
    lp adm dialout cdrom plugdev lpadmin admin sambashare vboxusers
    | SUMMARY |
    No errors or warnings.
    Done.
    I then ran 'sudo hp-setup', chose the device (which was detected), chose my wireless network, entered the wireless security key. On the configuration results dialog I get two messages:
    "Your printer has been succesfully configured on the wireless network. You may now unplug the USB cable"
    and
    "The Ethernet cable is plugged in which will prevent you from connecting to a wireless network. To connect wirelessly, remove the cable and try again. (VSA000)"
    There is no ethernet cable plugged in, so i can't remove it. I unplug the USB cable and click 'finish'. This makes the 'hp-setup'-dialog start over again, and the printer has not been installed.
    In the terminal i have the following:
    tjoff@mek-403-jakbo-01:~$ sudo hp-setup
    [sudo] password for tjoff:
    HP Linux Imaging and Printing System (ver. 3.11.10)
    Printer/Fax Setup Utility ver. 9.0
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    Searching on USB bus...
    GET /IoMgmt/Adapters HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    error: Missing response key: 'iorotocols-iorotocol-dd:dnsserveripaddress-0'
    GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/Adapters/Wifi0/WifiNetworks/SSID=mVnmXfsu HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/IoConfig.xml HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    I then tried to reconnect the printer usb cable and run 'hp-toolbox' and click "Wireless/wifi setup using USB". Now i get the error:
    tjoff@mek-403-jakbo-01:~$ hp-toolbox
    HP Linux Imaging and Printing System (ver. 3.11.10)
    HP Device Manager ver. 15.0
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    HP Linux Imaging and Printing System (ver. 3.11.10)
    Wifi Configuration Utility ver. 1.1
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    error: Channel write error
    error: An I/O error occurred. Please check the USB connection to your printer and try again. (Device I/O error)
    Done.
    I do not how get past this stage, and any help is welcome. 
    This question was solved.
    View Solution.

    A friendly soul on ubuntuforums pointed out to me, that the wireless configuration is only necessary when the printer is NOT connected to a (W)LAN. So all I really had to do was to configure the printer in the CUPS administation page, and it worked. Problem solved. Silly me.

  • What is "best practice" to set up and configure a Mac Mini server with dual 1 TB drives, using RAID 1?

    I have been handed a new, out of the box, Mac Mini server.  Has two 1 TB drives in it.  Contractor suggested RAID 1 for the set up.  I have done some research
    and found out that in creating the software RAID, this takes away the recovery partition, so I have been reading up on how to create a recovery "disk" using a thumb drive.  this part of the operation I am comfortable with, but there are other issues/concerns that I have.
    Basically, what is the "best practice" to setup the Mini, configure the RAID and then start the server.  I am assuming the steps would be something like this:
    1) start up the Mini and run through the normal Maverick setup/config - keep it plain and vanilla
    2) grab a copy of the Server app and store it offline in a safe place
    3) perform the RAID configuration / reinstall of OS X Maverick using the recovery tools
    4) copy down and start the server app
    This might be considered a very simplified version of this article (http://support.apple.com/kb/HT4886 - Mac mini server (Late 2012 and Mid 2011): How to install OS X Server on a software RAID volume), with the biggest difference being I grab a copy of the Server App off of the mini before I reinstall, since I did not purchase it from the App store, but rather it came with the mini.
    Is there a best practice /  how-to tutorial somewhere that I can follow/learn from? Am I on the right track or headed for a train wreck?
    thanks in advance

    I think this article will answer your question. Hope this helps: http://wisebyte.blogspot.com/2014/01/best-configuration-for-mac-mini-server.html

  • I just bought a new Mac mini but cannot complete the set up and I could not pair my apple wireless keyboard with mac min. Can someone help?

    I just bought a new Mac mini but cannot complete the set up, as I could not pair my apple wireless keyboard with mac min. Can someone help?

    Bluetooth: How to set up your Apple Wireless Keyboard

  • HT4245 i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.

    i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.

    To use factime on your Mac, I believe you will need to use your email address to do so instead of your wireless number.  Since you can't make calls on the Mac.

  • I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher).  Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable.  Would prefer a laser, color, all in

    I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher).  Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable.  Would prefer a laser, color, all in one.  Does anyone have printer suggestions that you know will scan wirelessly?

    Great information.  
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • I am trying to connect a PC wirelessly to my Mac OS X. The PC finds the Mac but asks for the WEP number. Where do I find this number?

    I am trying to connect a PC wirelessly to my Mac OS X. The PC finds the Mac but asks for the WEP number. Where do I find this number?

    Then use multipel 99 picture slideshows. 
    You can have up to 8 or 9 slideshows per menu.  If you add a sub menu reduce that by 1 and add 8 more to the sub menu.  The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows. 
    However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD.  It just becomes a single video/movie file.  So you should not have a problem with exporting at the large size, 720 x 540,
    and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
    OT

  • FAcing problems in configuring multiple macs(imac and mac book) pro) on time capsule

    FAcing problems in configuring multiple macs(imac and mac book)

    You may find these links useful:
    http://pondini.org/TM/Time_Capsule.html
    http://pondini.org/TM/4.html
    Ciao.

  • I´m not able to stablish wireless conextion from Macs with Leopard

    Hi,
    I have a new AirPort Extreme 802.11n and I´m not able to stablish wireless conextion from Macs with Leopard.
    I´m following the manual´s steps to connect a Mac and it doesn´t work. Does it have to be with Leopard? Should I do something after updating to Leopard?
    Does it have to be connected to the Internet to work? What could be happening? Please, help.
    Thanks.
    Regards.

    I update my lap top to Leopard, and was having trouble getting a connection out from a router. I would connect to the wireless network, but never get beyond that. I never had a problem at home with the airport extreme.
    It should work. Have you been connected to a different network?
    Can you see the airport extreme name as an option?

  • Does it exist a wireless scanner for mac 10.8 ?

    does it exist a wireless scanner for mac 10.8 ?

    There is no Airscan :-)
    but you can scan wirelessly on any your OS compatible network scanner of MFP printer with a scanner.
    This has to be connected to your network either via WiFi or Eth cable.

Maybe you are looking for