Wireless connected but cannot open webpages

I just bought a wireless router (WRT54G) for my (wired) Mac desktop and (wireless) PC laptop. The Mac (wired through the router) works fine, but I'm having trouble with the PC. It can find the wireless network and connect to it just fine, but when I open a web browser, the browser is unable to connnect to any websites. We are on a school campus that has Ethernet built in, which is our internet connection, so I'm not using an ISP or modem. I set up the router with the Mac, using the Secure Easy Setup button, but do I need to do the same thing with the PC? Any advice would be helpful. Thanks.

Hi… logon to router’s setup page, try changing wireless channel to 1 or 11, go to advanced wireless settings reduce beacon interval to 50, fragmentation and RTS threshold to 2304, change Transmission rate to 54 MBps…also try upgrading latest firmware on router, check whether it makes any difference or not and let me know.

Similar Messages

  • Airport is connected but cannot open internet browser??

    excuse my stupidity if this is an easy one.... novice!!
    i mainly use ethernet cable to connect to the internet but when Im out and about or at home when i try to connect to the internet via wirless the status shows that it is connected via airport but when i try and surf the net it states that it cannot find a server. i have tried all sorts of things but cannot seem to work it out. even if the signal is full i cannot access the internet at all.
    if any one can help me this would be greatly appreciated.
    thanks
    ibook G4   Mac OS X (10.3.9)  

    hi, i tried to connect at my parents house , they have a wireless router (not sure of the make) which is on virgin and it said that i was connected to the wireless network they have but i still could not access the internet. I also tried it on virgin trains wireless network and the same happened, said i was connected with full signal but still no internet access. Im sure there is a really simple answer to this!!
    thanks

  • Am connected to orange fr, i can d/load emails etc but cannot open any webpages, Ipod Touch 5th version, latest IOS installed. Any advise please.  First time I have experienced this as my Ipod works immediately elsewhere

    I am connected to Orange fr, I can download emails etc but cannot open any webpages.  Ipod Touch 5th vers, latest IOS installed, any advice would be most welcome.  This is the first time I have had this problem as my Ipod works immediately everywhere else.  My laptop does not show this problem using the same orange provider, so its obviously some setting in the Ipod :-(

    Try this:
    1. Double-click the Home button to reveal Task Bar at bottom
    2. Hold the Safari app down for a second or two until you see the minus sign
    3. Tap the minus sign to close app
    4. Re-launch the app and test
    Note: If necessary close all apps in the Task Bar

  • MacBook Pro sees wireless networks but cannot join any. Connection timeout error

    I have a MacBook Pro here that sees all wireless networks but cannot join any. It gives a connection timeout error with every one.
    Internet access via ethernet cable works just fine.

    It's not uncommon for you to "see" a great many networks, dozens even, yet you not be able to connect to any of them even if they are "open" (no lock icon). There may be a number of reasons for that, such as they're too weak for a reliable connection, or the router may limit connections to only specified devices.
    There is only one way to achieve a reliable network connection, and that's for you to connect to your own wireless router. Even that doesn't work if its signal is too weak or if there are many competing wireless networks in your area.
    If it's your own AirPort Base Station you're trying to use but can't, the latter could be the reason. The only way to mitigate the effects of wireless interference is to use 802.11n and 5 GHz whenever practicable. Even today you may only find one or two 5 GHz networks being used in an otherwise "crowded" area.

  • My iPad is connected to my network but cannot open any page in safari or access the internet

    My iPad is connected to my network and have full signal but cannot open any page in safari or connect to the internet or able to log in to iCloud. I forgot all my connections, reset my router updated to 8.1.1 and nothing

    Hopefully, this will be of some help.
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support

  • I am connected to my wireless network but cannot access the internet. Any ideas?

    I am connected to my wireless network but cannot access the internet. Any ideas?

    Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • I am using Ipad 2, Wi-Fi is connected but cant open any web-site " error : Safari cannot open the page because it is not connected to the internet "

    I am using ipad 2, Wi-Fi is connected but cant open any web-site " error : safari cannot open the page becasue it is not connected to the internet "
    need support please

    You haven't provided much information, such as what type of router you have?  If you entered the encryption key as the password as opposed to the router name you have selected?  If you have WEP or WPA?  What you've tried that didn't work, other than saying it doesn't work?  So, below is a link to some assistance.  Follow this and see if it helps you.........
    http://www.apple.com/support/ipad/assistant/wifi/

  • I get wireless connection but my internet does not work on my ipad 2

    I get wireless connection but my internet does not work on my ipad 2

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have just acquired an iMac desktop. I want to sign on to my airport wireless network, but cannot remember the password. How can I access the password or reset it. I already use a MacBook Pro and an iPad on the network.

    I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.

    How can I access the password or, if necessary, reset it.
    Read the user manual that came w/your Airport router or you can cross-post in one of the  AirPort Forums for instructions. 

  • Pogo website loads and displays but cannot open games; works fine on Internet Explorer.

    For about two weeks now, have been unable to open games on the Pogo website; the main page opens but cannot open any games.
    All works just fine on IE9.
    No work on 8.0.1; installed 9.0.1---still no work as described above.

    Surely, am not the only one who cannot load games on Pogo.com. . . .the website loads in but I get a "connection reset" type message each and every time I attempt to load any game. W7Pro 64-bit Dell Studio XPS i7core. Was properly working in F8 and then just stopped doing so; upped to F9 but still have same problem.
    Ideas, anyone?
    BTW, Pogo works just fine in IE9.

  • WRT54GS and MAC OSX "has internet connection, but cannot load page"

    Ok, I have skimmed through the threads here and the FAQ and still am having troubles. I amt trying to connect a MacbookPro to this wireless router. I have had it connected before which adds to my frustration. I ran all the system diagnostics and come to a point where it says, "This device has an internet connect but cannot load __________. Make sure you have the address typed in correctly." My MAC picks up the router signal, but in the diagnostics it goes as follows. AirPort - Yes Airport Settings - Yes Network Settings - Yes ISP - Yes Internet - No Server - No Please, any help is very appreciated.

    Also tried the factory reset and starting from scratch and nothing...

  • IE8 cannot open webpage for UPK  - help!

    I have a UPK which appears to work on everyone elses laptop except mine. I have a Sony Viao running IE8 at default settings and Vista. Everytime I click on the PLAY application IE looks for the localhost and just returns the message 'cannot open webpage'. I've looked through the forums and disabled the google toolbar, the pop up blocker and set privacy at low but it doesn't make any difference.
    I am not hugely technical, so, any help or ideas are greatly appreciated.
    Thanks

    I think it would be best for you to enter a support ticket to have this issue resolved: http://support.oracle.com/
    Best regards,
    Marc

  • Pages 5.2 opens all kinds of other document formats (even old .doc  Versions), but cannot open Pages 08 etc. of its own kind? I have to use NeoOffice to open my documents of many years of work. Is there an option to organize a corporate com

    Pages 5.2 opens all kinds of other document formats (even old .doc  Versions), but cannot open Pages 08 etc. of its own kind?
    I have to use NeoOffice to open my documents of many years of work.
    Is there an option to organize a corporate complain to Apple to be heard?

    We have been doing nothing but for 10 months.
    Here is the response:

  • For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

    For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

    mike frischenmeyer
    What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
    Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
    know the details and troubleshoot to determined what caused the problem.
    1. Can you open a new project?
    2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
    for that project?
    3. Please review the Adobe document on troubleshooting damaged projects.
    Troubleshoot damaged projects | Adobe Premiere Elements
    4. What are the steps that you are using to reopen this saved closed project.
    a. File Menu/Open Project/Name of Project
    b. Other
    Please review and consider and then we can decide what next based on your further details and results..
    Thank you.
    ATR

  • IPhoto will not load the iPhoto library.  When I select "show all windows" the library does appear but cannot open it.  I am on version 8.1.2 and using Maverick.

    iPhoto will not load the iPhoto library.  When I select "show all windows" the library does appear but cannot open it.  I am on version 8.1.2 and using Maverick.

    I was able to get it fixed. I had received some responses and they had me
    recreate the library I believe.  It's been a while so I cant remember
    exactly what I did. I have since upgraded to the latest i photo version and
    have had no problems with it.
    Brian
    On Friday, November 7, 2014, Apple Support Communities Updates <

Maybe you are looking for

  • How to audit a user at same time it is created?

    Hi, I got a problem and I hope someone can help me. Is there any way of auditing a user at same time it is created? For example I create the user "Eddy" and I want this account to be automatically audited so I don't have to execute "audit session use

  • Difference between using the Enterprise Portal and SAP GUI

    Hi Gurus, Could one of you please send me a document that lists the differences between the Enterprise Portal and SAP GUI? thanks in advance

  • Problem with the Letter I

    Sometimes when I view vector art on the screen the letter I shows up extra wide and big, but the printed version works fine. Example below. This only happens some of the time to me, but not always with the same piece of artwork. I think this must be

  • Keep files on iPod when syncing to new hard drive?

    Hi - I just bought a new external hard drive onto which I moved my iTunes files, along with playlists etc. I now want to synch my iPod to the new drive, with the updated library and corresponding playlists, but would prefer not to have to erase the i

  • 1 bought second hand ı phone 3

    I  bought  second hand  ı phone  3  for my son. I chosed  "  reset  all  settings " now  it  doesn't  open. ıt  stays  apple  ıcon.