Wireless Connection Apple TV

Apple TV shows a yellow warning sign and says there is a problem connecting to the network when I try to connect - either followed by "(-3)" or "(-6)" at the end of the message. Have tried diagnostics which confirms all ok, switched off and back on etc etc but no luck. Wireless network works fine with all other computers, iTouch etc so can't be my router. Any ideas?

Check ALL of the settings in the ATV network setup screens.
I've had ATV reset network settings to various defaults (mainly following software upgrades) so that the configurations are all wrong for my network, which meant I couldn't connect tot he network and had to manually reset them all.

Similar Messages

  • Problem wireless connection Apple TV3 with wireless router.

    apple tv version 3 connection to dd-wrt based router.  Can not get pass the wireless password screen authentification.  Have broadcast on, WPA2 personal with both both tkip and aes turned on, MAC filter off. 

    Hello DrKahanamoku
    Start with the article below to troubleshoot issues with connecting your Apple TV over Wi-Fi. The second article will also give you more settings to check against for a proper connection.
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Regards,
    -Norm G.

  • Using Apple Tv as a wireless connection to second monitor

    I gather from reading here that AppleTv will only display iTunes content
    Is there a third party solution to allow anything on my computer to display on my tv also?
    Also curious why Apple locked this great device to only display iTunes content and not everything on my mac

    Robert Enyeart wrote:
    Thanks but what I am looking for is a wireless connection between my mac and my tv screen
    you might be able to devise a workaround (with old Mac or PC) using ScreenRecycler.

  • How can I resolve the issues connecting to my wireless connection with my Apple tv?

         Ive had my Apple tv for about a month now & I still have not even used it for what I actually got it for. It allows me to use the airplay feature with my ipad2. But when I try to use the home sharing feature it never connects with my apple ID. At first I thought that maybe I'm just typing it the wrong way, but then I used the same ID and password to purchase an app on my iphone & it works. It's not my wireless connection because multiple devices connect to it just fine, without any issues. I tried reseting it, that obviously didnt work. I really just dont know what else to do.

    you can't rely on airplay mirror some apps support the old in app airtune audio only option if the video app in question does you can do it from the apps settings somehow
    if not then you need a airport express which does pretty much what airplay mirror on the Apple TV does but it's a audio only

  • How do I remove the wireless connection from my Apple TV 2.

    I have an Apple TV 2 and I want to sell it. Before selling it, I want to remove my wireless connection which has my home network password from the Apple TV. How do I do it ?
    Thanks for helping me.

    Put it in DFU and do an update. This will not only update it, but it will remove all settings. DFU =  hold menu+play while plugging it in.

  • I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV through IPad wherever by using wireless and App Remote

    I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV in my IPad wherever by using wireless and App Remote??

    If you have an iPad 2 you can wirelessly mirror it to your TV via the ATV device. If you have an iPad 1 then you can use airplay but not all apps are enabled to push video, as the developer needs to do this.
    You can also view all local content from iTunes or your iPad, pushed via airplay/home-sharing.
    The other services available are iTunes movie rentals, TV shows (past purchases viewable from the cloud), Photo Stream, Netflix, Vimeo, Podcasts, Youtube, Sports etc.
    More info
    http://www.apple.com/appletv/

  • IMac and other Apple devices lose wireless connections

    We have two Apple iMacs, a MacBook Pro, an iPad and iPad2 and they all intermittently lose their Wireless connection to my network.  All of my PC's work just fine and stay connected.  This is funny... the MacBook Pro booted to Windows 7 Pro stays connected, but the MacOS doesn't.
    It appears to be a problem with DNS, because if you ping to a remote host, you get a response back.  Also, if you put an IP address into Safari on the iMac and MacBook then a site will come online.  However, the iPads just say "You are not connected" while in Safari.  I have verified that I'm using the correct DNS addresses provided by my ISP, and I have a Windows Domain server running DHCP/DNS on the inside of my firewall.
    We recently moved and were issued a new wireless router by our ISP.  I was thinking that might be the problem, but then we don't have the problem with any of the Windows PCs.  This router is manufactured by Arris.  My other router was a Cisco that worked like a champ.
    Turning off the Airport feature and turning it back on restores Web Browsing capability.  Interestingly, if I have a remote desktop session running, it never gets disconnected even when the web stops working.  Again, symptoms point to DNS issues.

    If you feel it's DNS related then change the DNS setting to:
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences

  • Trying to connect apple tv through a wireless public hotel connection.

    Hi
    Im trying to connect Apple TV to a DataProjector in a conference room, connect it to the net via a wireless public hotel network. Then take photos at predinner drinks so they appear in the conference room via photo stream with the ATV screen saver.
    ATV is telling me its connected to the hotel public network with a strong signal strenght. But I cant login to my Icloud account saying its unavailable and try later. Same thing with itunes account. From this I'm assuming its connected but Im being blocked by the hotel as I need to enter a password. So where do I enter the password?
    Can anyone help here?

    Scratch that, It wasnt connected through the hotel network because I tested connecting through personal hotspot on the iphone and everything came alive.

  • I have a new Macbook Air 2012, Apple TV 2 and I have tried wired and wireless connections both result in stuttering during video airplay to the ATV2.

    I have a new Macbook Air 2012, Apple TV 2 and I have tried wired and wireless connections both still result in stuttering during video airplay to the ATV2.
    I have even bought a new Airport Extreme Router just to confirm it is not the router and it still didn't help.
    I have brought all items in the same room with wired connections and still same issue.
    I was thinking maybe ATV 3 might help since it has 2 wifi antennas and faster processor.
    Have tried everything I could think of.
    This was one of the main reasons I bought a Macbook Air for this airplay feature. Very frustrated.
    Any thoughts; any other suggestions would be greatly appreciated.
    Thanks

    Thanks for the suggestion.
    I also disabled Norton Firewall and restarted the Air and Now I'm able to use Air Play.
    I know that the Apple remedy said that to do that in the support article, but I totally forgot I had that enabled..
    It actually works. I can even stream to the Apple TV now through my MacBook Air.
    BTW, Go into setting under the ATV, and click on update...you'll see that there was another update avaialble for the last gen of ATV...
    It does have to restart twice..I guess once to download and and nother to apply.

  • Does Apple TV support wireless connection to the new MacBook Pro retina in an extended display mode?

    Does Apple TV support wireless connection to the MacBook Pro retina display in an extended display mode? What is the output resolution and is sound also transmitted across?

    SB1983, by extended display do you mean mirror?  All MBP since early 2011 support it if they are running OS X 10.8 Mountain Lion.  The resolution will depend on your Apple TV (2 Gen is 720 and 3rd Gen 1080) and wifi, it will lose some quality but I find it minimal.  It does also mirror the sound.
    Jules

  • HT4628 After installing the new OS from apple (10.8.2) my macbook pro keeps disconnecting from the internet.  I am connecting with an Airport Extreme and while it shows I am connected, every 20-45 seconds its searching for a wireless connection.  Any sugg

    I guess I posted my question as a title but that is my issue.  My airport is connected via wireless yet it keeps searching for a wireless connection, hence I am experiencing bad latency and disconnection issues.  Anyone know a solution?

    I have the same problem. And in my case it happens when i transfer "large" files over the WiFi. When i send an MP3 filer over Skype i loose connection. When i transfer updates between my iPhone 5 / iPad 3 and iMac with Mountain Lion i loose connection. When i have a video conference i loose connection. You get the idea.
    There is usually like 30 people using their own router on the 2.4 GHz band near by. None on the 5 GHz band which i use. But when my WiFi freezes on ML i can only see my own router. And i am also connected to it. But all my neighbors WiFi routers are now invisble to me. My network stalled.
    What i do is that i disconnect my WiFi and then reconnect it again. Thank fixes it. But all my transfers and what not has been dropped. And i have to start all over - and the WiFi will stall again.
    While my WiFi is frozen on the iMac with ML i have no problem using the same router on the same 5 GHz band with my iPhone 5 or iPad 3.
    Downgrading the AirPort Extreme to 7.6.1 from 7.6.3 helped a bit. Now i only loose connection a few times each day.
    It is a software error in ML i am sure of. A driver maybe. But i am suspecting that it is either a speed-sync error or an energy saving error. Like the network card turns of in the middle of a file transfer to save enrgy - maybe.
    When i stream movies from my iMac to my Apple TV or  3 there is no problem at all. It is so odd.

  • Old generation Apple TV loses wireless connection

    I have an older gen Apple TV (silver).  Recently it upgraded the software...can't remember if it's ever been updated prior to that.  I've had it for at least 3 years...no problems connecting to the internet.  Now it loses connection once per day...goes OK for a few hours, then kicks out.  Seems there are many similar complaints...any answers other than buying the most recent version?  Seems to run perfectly well when it's connected.

    Hello Weff2727,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Apple TV (1st generation): Troubleshooting wireless connections
    http://support.apple.com/kb/ht1595
    Restart your base station or router. Sometimes this is done by turning the router off for a few seconds, and then on again, but check the documentation provided by the manufacturer.
    To restart your Apple TV, press and hold Menu and Menu down/scroll for about 6 seconds, and then choose Restart from the menu.
    If the issue continues after restarting, reset your router or base station and Apple TV to factory settings
    Reset your base station or router. Use the documentation provided by the manufacturer to reset to factory settings.
    To reset your Apple TV perform a factory restore.
    Best of luck,
    Mario

  • Error while wirelessly connecting Photosmart C5280 to Apple Macbook

    I have a Photosmart C5280 All-in-One connected to my PC computer. While trying to wirelessly connect my Apple Macbook to the printer this error occured: Cannot Connect to the Printer Using the Wireless Printing Upgrade Kit Connection Manager in an Infrastructure Network
    How do I fix this? 

    No - it won't work - AppleTV gets it's data via iTunes.
    iTunes fetches data from wherever it is be it attached/internal/network drive, then relays it across the network to AppleTV.
    Being able to access an iTunes style library on a NAS or similar would be great in principle but it's not possible in practice.

  • Can you use Iphone hotspot to wirelessly connect to apple TV

    Can you use Iphone hotspot to wirelessly connect to apple TV.  ie I have no router but am interested in playing music from phone to apple TV.

    Yes in theory, though do check your phone contract small print and keep an eye on your data usage - in theory local data sent across the LAN created by the hotspot should not use 3G data but some carriers seem to treat it as internet data usage.
    AC

  • Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????

    Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????  AT&T my DSL carrier suggests I get a new router.  Apparently the one I have is really old and doesn't support my Macbook Pro.  Does this sound right?

    If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
    Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
    One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
    One for entering into devices, computers etc for Internet Access Only.
    You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
    Also if you give out the password to another, they can't hack the network with the guest access password.
    Computers remember the internet password, so anyone with access to your machines or network will have the password.
    Since you have another Admin only password, they can't hack in. got it?
    You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
    Good luck.

Maybe you are looking for

  • Missing Component?? Help!

    Hi, I have installed WEBAS and the developer studio sneak preview.  In the development configurations perspective - under local DC's - Local Development.  I am missing a DC under SAP_JTECHS.  In the documentation it refers to a component com.sapporta

  • Slow Editing Respone Time

    Hi--read thru iMovie discussions and am still a bit stumped. Have edited a few movies on iMovie and it seems that the more transitions and material I have, the LONGER it takes for the program to respond. Is this normal? I seem to have quite a bit of

  • I may have inadvertantly downloaded to Firefox 5 instead of 4 and can not open the application because it is not supported. Can I still download Firefox 4, which I intended to do?

    I wanted to upgrade from Firefox 3 to Firefox 4. But, after I completed the download and then tried to open the Firefox application, I received a pop-up message saying, "You cannot open the application "Firefox" because it is not supported on this ar

  • Using BAPI_COPAPLANNING_POSTDATA

    Hi All.   I am using following BAPI function to upload COP Planing data,but i don't have idea to how to pass the data to bapi function,any can help me how can i pass data to bapi function  to get the out put. BAPI_COPAPLANNING_POSTDATA Thanks knishka

  • Bounce management  query

    Hi I  am trying to carry out Bounce Managemnet scenario.I have made all the settings required for the same as far as Rule modeler and category modeler is concerned. My problem is that I am unable to test the scenario. can anybody help me with how i c