Wireless Connection drops after a few moments

Hello everbody!
Background: I have a cheap laptop with a windows only ACPI module, so I have to set acpi=off at all times anyway. I tried Ubuntu, which has the wireless problem too, but instead of repairing something bloated like Ubuntu, I now found my way to Arch to make it right from the beginning.
If the wireless problem gets solved, I want to go on installing the nvdia driver, maybe configure xmonad. (I want to try KDE4 for fun too though, eyecandy you know ) Simple working desktop without getting my laptop heated up like windows does.
The problem: I set up my wireless connection like the wiki says:
-The original SSID was "FRITZ!Box Fon WLAN 7270 Annex A" which I tried to escape with \ and using 'ssid'. This wouldn't work at all, if you have any explanation for that I'd love to know it. I changed the SSID to something without spaces and special characters and the connection would work. But it would be nice to change it back to the original.
-So it works now. Fine, I thought. But the connection drops after a few moments and I have to "killall wpa_supplicant dhcpcd" and start them again to make it work again. For a few moments only. So I went through the logfiles and found error messages which Google wouldn't help me solve on my own. Now I'm asking the Arch specialists here
Note: Using the partedmagic livecd, the wireless connection works out of the box and absolutely stable. I believe even a bit faster than under windows. So it has to work perfectly, I just don't know how to make it in Arch yet.
Wireless encryption: WPA2 (CCMP)
lspci | grep -i net
00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
05:00.0 Network controller: Ralink corp. RT2860
wpa_supplicant.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
ssid="fritztest"
scan_ssid=1
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk=Passwort
starting wpa_supplicant with -dd to show how the connection auths:
Trying to associate with ma:ca:dr:es:se:bb (SSID='fritztest' freq=2457 MHz)
Associated with ma:ca:dr:es:se:bb
WPA: Key negotiation completed with ma:ca:dr:es:se:bb [PTK=CCMP GTK=CCMP]
CTRL-EVENT-CONNECTED - Connection to ma:ca:dr:es:se:bb completed (auth) [id=0 id_str=]
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-TERMINATING - signal 15 received
lsmod
Module Size Used by
usbhid 32582 0
hid 59859 1 usbhid
uvcvideo 54388 0
videodev 34611 1 uvcvideo
v4l1_compat 13478 2 uvcvideo,videodev
snd_hda_codec_realtek 186046 1
joydev 7378 0
rt2860sta 498204 0
snd_seq_dummy 1067 0
snd_seq_oss 24984 0
snd_seq_midi_event 4484 1 snd_seq_oss
snd_seq 41656 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4349 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 33442 0
snd_mixer_oss 14356 1 snd_pcm_oss
snd_hda_intel 19249 0
snd_hda_codec 59723 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4752 1 snd_hda_codec
snd_pcm 57767 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 15629 2 snd_seq,snd_pcm
snd 42562 11 snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5017 1 snd
snd_page_alloc 5873 2 snd_hda_intel,snd_pcm
ohci_hcd 19405 0
ehci_hcd 31420 0
usbcore 119796 5 usbhid,uvcvideo,ohci_hcd,ehci_hcd
i2c_nforce2 4780 0
i2c_core 14855 2 videodev,i2c_nforce2
psmouse 50729 0
shpchp 26528 0
pci_hotplug 23303 1 shpchp
sdhci_pci 5466 0
sdhci 13959 1 sdhci_pci
mmc_core 45599 1 sdhci
led_class 1997 1 sdhci
forcedeth 47287 0
serio_raw 3618 0
evdev 6716 0
pcspkr 1347 0
sg 20820 0
rtc_cmos 7546 0
rtc_core 11851 1 rtc_cmos
rtc_lib 1482 1 rtc_core
ext4 302709 1
mbcache 4278 1 ext4
jbd2 63651 1 ext4
crc16 1041 1 ext4
sd_mod 25215 3
sr_mod 13097 0
cdrom 31305 1 sr_mod
ahci 29826 2
libata 138071 1 ahci
scsi_mod 79436 4 sg,sd_mod,sr_mod,libata
rc.conf
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!rt2800pci !rt61pci !rt2x00pci !rt2800usb !rt2800lib !rt2x00usb !rt2x00lib)
iwconfig in the few moments the connection works
wlan0 Ralink STA ESSID:"fritztest" Nickname:"RT2860STA"
Mode:Managed Frequency=2.457 GHz Access Point: ma:ca:dr:es:se:bb
Bit Rate=54 Mb/s
RTS thr:off Fragment thr:off
Encryption key:some-key
Link Quality=96/100 Signal level:-56 dBm Noise level:-81 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
because the wiki says the driver is in the kernel, I also looked at the kernel log which has weird errors:
Jun 7 02:31:49 arch kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Jun 7 02:31:49 arch kernel: 1. Phy Mode = 0
Jun 7 02:31:49 arch kernel: 2. Phy Mode = 0
Jun 7 02:31:49 arch kernel: RTMPSetPhyMode: channel is out of range, use first channel=1
Jun 7 02:31:49 arch kernel: 3. Phy Mode = 0
Jun 7 02:31:49 arch kernel: MCS Set = 00 00 00 00 00
Jun 7 02:31:49 arch kernel: <==== rt28xx_init, Status=0
Jun 7 02:31:49 arch kernel: 0x1300 = 00073200
Jun 7 02:31:55 arch kernel: ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2120
Jun 7 02:31:55 arch kernel: ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
Jun 7 02:32:47 arch kernel: ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1985
Jun 7 02:32:57 arch kernel: ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1985
Jun 7 02:33:07 arch kernel: ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1985
Jun 7 02:33:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=1!
Jun 7 02:33:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=2!
Jun 7 02:33:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=3!
Jun 7 02:33:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=4!
Jun 7 02:33:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=5!
Jun 7 02:33:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=6!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=7!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=8!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=9!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=10!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=11!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=12!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=13!
Jun 7 02:33:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=14!
Jun 7 02:33:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=15!
Jun 7 02:33:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=16!
Jun 7 02:33:32 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=17!
Jun 7 02:33:32 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=18!
Jun 7 02:33:32 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=19!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=20!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=21!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=22!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=23!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=24!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=25!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=26!
Jun 7 02:33:34 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=27!
Jun 7 02:33:34 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=28!
Jun 7 02:33:34 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=29!
Jun 7 02:33:42 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=30!
Jun 7 02:33:42 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=31!
Jun 7 02:33:42 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=32!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=33!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=34!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=35!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=36!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=37!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=38!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=39!
Jun 7 02:33:44 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=40!
Jun 7 02:33:44 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=41!
Jun 7 02:33:44 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=42!
Jun 7 02:33:52 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=43!
Jun 7 02:33:52 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=44!
Jun 7 02:33:52 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=45!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=46!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=47!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=48!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=49!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=50!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=51!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=52!
Jun 7 02:33:54 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=53!
Jun 7 02:33:54 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=54!
Jun 7 02:33:54 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=55!
Jun 7 02:34:02 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=56!
Jun 7 02:34:02 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=57!
Jun 7 02:34:02 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=58!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=59!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=60!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=61!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=62!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=63!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=64!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=65!
Jun 7 02:34:04 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=66!
Jun 7 02:34:04 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=67!
Jun 7 02:34:04 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=68!
Jun 7 02:34:12 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=69!
Jun 7 02:34:12 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=70!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=71!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=72!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=73!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=74!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=75!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=76!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=77!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=78!
Jun 7 02:34:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=79!
Jun 7 02:34:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=80!
Jun 7 02:34:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=81!
Jun 7 02:34:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=82!
Jun 7 02:34:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=83!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=84!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=85!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=86!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=87!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=88!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=89!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=90!
Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=91!
Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=92!
Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=93!
Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=94!
Thanks in advance to anyone helping me! I really really want to get Arch going. It's ideal for this laptop, no wasting of disk space, ressource friendly, the temperature doesn't go up as much with less cpu usage I guess..
I've written quite a bit, but hopefully this makes it easier for you to help me! I've included all I thought which could be useful.
Greetings from Germany,
Fenris

The easiest solution might be to setup NetCfg somehow with your wifi card and access point.  Have you tried that?  Can you find your card's chipset on the wiki?(chances are that your particular chipset will need a firmware put into /lib/firmware.  Again that's found on the wiki on the NetCfg or Wifi page, I forget which sorry.)  Those are two places where I'd look for good information.
By the way, your rc.conf is way out of date.  You should look at updating it by using the recent rc.conf.pacnew file that you'll find in the /etc directory.

Similar Messages

  • Wireless connection drops after time. Please assist.

    Hi
    My problem is that my wireless connection drops every 5-15 minutes.
    I don't know all the relevant info to give.  If there's something I can post that will help let me know and I'll reply.
    I've used netcfg to configure my network.  I have a Canyon CN-WF511 wireless card.
    I load the following 3 modules in my rc.conf;  rt2500pci rt2x00lib rt2x00pci.  I think those are the only ones pertaining to my network card.
    When it drops I just netcfg -a then netcfg default (profile name) and it works for another few minutes.
    Below is my network profile.
    CONNECTION="wireless"
    INTERFACE=wlan0
    #IP="dhcp"
    #DHCP_TIMEOUT=20
    IP="static"
    IFOPTS="192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    GATEWAY=192.168.0.1
    #DOMAIN=localdomain
    #DNS1=192.168.0.1
    ESSID=default
    SECURITY=none
    SCAN="YES"
    TIMEOUT=15

    The easiest solution might be to setup NetCfg somehow with your wifi card and access point.  Have you tried that?  Can you find your card's chipset on the wiki?(chances are that your particular chipset will need a firmware put into /lib/firmware.  Again that's found on the wiki on the NetCfg or Wifi page, I forget which sorry.)  Those are two places where I'd look for good information.
    By the way, your rc.conf is way out of date.  You should look at updating it by using the recent rc.conf.pacnew file that you'll find in the /etc directory.

  • Wireless connections drops after AirPort Extreme 2007-001 Update

    Hello, I am getting a lot of wireless connection drops since I installed the AirPort Extreme 2007-001 Update. Anyone has similar issue? Any fix?

    Well, I was conneting to the University's wireless server (which is maintained and huge) flawlessly prior to the update. My friend has a macbook pro and didn't apply the update and he has no problem. I installed the update and since then I'm having a hard time connecting to ANY wireless server/router.
    I came across the following, looks like a lot of other persons are having the same issue:
    http://www.macfixit.com/article.php?story=20070202141024604
    http://www.macfixit.com/article.php?story=20070126190822382
    Looks like my solution would be to perform an Archive & Install and to not reinstall the AE 2007-001 update.

  • Wireless connection drops after bout 5 min - HP all in one C6180

    Hi!
    I'm having problem with my all in one product - HP all in one C6180. The wireless network connection drops, and the printer becomes unreachable from both web-interface and printjobs/scanningjobs etc...
    This problem has existed since I bought this machine..
    I've tried several different setups when it comes to WEP/WPA/WPA2 etc..and also different channels on the wireless, but still same problem exist. The printer works perfect for about 5 min, but then drops the connection it seems like. I'm having about 5-6 devices connected to my wireless router (Draytek VGI 2910), and all seems to work perfect together except the C6180.
    At this moment I'm running WPA2 for security on my network. I've tested the software both on Win/ Mac, and currently running the Mac-version.
    Is there any firmware-update out that could solve my problem, or how else should I manage it to work properly?
    Thanks for any help!
    /V

    There does not appear to be any firmware update on this page.  It could be a router issue.
    Let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, set a high IP address, like .250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (ends with .1) for the gateway and first DNS. Leave the second one blank.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My internet connection drops after a few hours

    Is a setting off. My airport extreme loses connection after a feww hours. Constantly have to reboot and reconnect. Stays connected fine when direct to mac?

    Hello and thank you for the response.  The only way I can get these iMacs to stay connected to the internet is via Static IP.  The previous post states that static doesn't work but I didn't fill out all the fields correctly, like DNS and search domain.
    Both Ethernet and Wi-Fi pick up an IP address via DHCP and after a few minutes the IP is dropped then a self-assigned 169 address appear.  With Static IP, we're good to go. 
    I've tried DHCP with manual address.
    Editied the location on network preferences.
    I've disabled "use passive FTP mode"
    I connected Windows machines to the same network port as these iMacs and there are no issues.
    OSX 10.7
    Thanks again,
    Oz

  • WRT54G2 v1-Wireless speed drops after a few hours/days, changing channel fixes it

    Hi.
    I have a WRT54G2 version 1 with the latest firmware from June 2009.
    I have found that it performs very well (10-11mb wireless speeds) for a while (a few hours or sometimes a few days) but then the wireless performance drops below 1mb. Wired performance is not impacted. 
    It seems that I can immediately solve the issue by changing to another channel. The speed jumps right back up. However the same problem happens again eventually and again changing the channel fixes it (and even changing it back to the channel I had originally will fix it). 
    Any thoughts? I've never had a router do this and it's quite annoying.
    Thanks

    Nope this didn't fix it within minutes the same issue popped up. Note that this doesn't occur with another wireless router I own (I swapped it out just to test). I'd just not even bother with the WRT but my Vonage box doesn't work with my other router so I need to use this one. Any other ideas?
    (Mod Note: Edited for guideline compliance.)

  • My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.   My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexp

    My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
    My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
    I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
    Thanks in advance.

    I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
    My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
    Airport Express is model A1143
    And I have tried to connect with iPhone - same same.

  • HT1695 My phone sttruggles to connect to wifi & if it does connect it loses connection after a few moments

    My phone sttruggles to connect to wifi & if it does connect it loses connection after a few moments, This has happened a few months ago and i had a replacement phone sent a couple of weeks later it happened to my husbands i phone 4s and now 4 months later im having the same problem!

    Thanks, My Husbands I phone and Laptop are not having any issues connecting to the wifi and i have reset the network settings and have restored the phone. It will connect to the wifi for a second then looses connection.

  • Wireless connection drops at random

    Hi,
    I have a 27" late 2011 iMAC. Since I updated to Lion my wireless connection drops at random. The wireless symbol shows that I am connected, but i cannot use the internet.
    The sollution at that time is that I turn off wireless, and than turn it on again. This solves the problem, but only temporarely. Since I also own a NAS for TimeMachine backups, the dropping of the connection is annoying because the backups fail most of the time.
    What is causing this problem. I have 2 windows PC's and the connection stays. Router has latest firmware (fritzbox 7340), and my mac is up to date.
    Please help.
    Thanx in advance.

    Hi,
    try to change the WiFi channel on your fritzbox, sometimes it works better on higher channels 11, 12, 13 especially if there are Telekom routers in your neibourhood. Make sure to use the latest Firmware for your Fritz!Box, the actually had a few issues in this area a few months ago. If this still does not help, only activate the 2,4 Ghz Bandwidth on the Firtz!Box and deactivate de 5 Ghz option.
    I hope that this will solve your issue.
    Cheers

  • The illustrator application quits after a few moments of working

    The illustrator application quits after a few moments of working. Does anyone know why this keeps happening/

    Have you asked other users in that forum? Illustrator
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    When you go there, the link below is an EXAMPLE of the kind of information you need to provide
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

  • Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

    Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

    I seem to have fixed it by putting <div  class="clearfloat"></div> after the navigation bar?

  • Wireless connection drops every day -- iTunes 8.02 the problem??

    Hello! Our iMac is connected to the internet via Airport, and we have rarely had problems with the connection. For the last two weeks, when I get on the iMac for the first time that day, I have to reconnect to the wireless network through the Airport Setup Assistant every single time. I've tried resetting our cable modem and Airport -- no effect on the problem. I've tried going into sleep mode without logging off to see if that might help -- nope. I've tried repairing permissions in the off-chance that that might help -- no again.
    In something that seems more than just a coincidence, we updated our iTunes to 8.02 about two weeks ago, and that's when this problem began happening. I am especially suspicious that there's a link because we did not update iTunes on our Macbook and it has no problem whatsoever staying connected to the exact same wireless network.
    Two questions, then:
    -- Is the iTunes 8.02 update the problem?
    -- If so, how do I go back to iTunes 7.7?
    Thanks!

    Hi, I'm new to iTunes and apple, but this is happening to me too! I've got iTunes 8 and whenever I run it, my wireless connection drops (disables itself) and cannot be restarted without rebooting the machine. Did you manage to find an answer?

  • Wireless connection drops out for no reason

    I have a macbook with 10.4.11 update. I had my macbook since october last year and had no problems. About two months ago now i have this problem were my wireless connection drops for no reason, my modem/router shows everything is working normal with its lights on the front panel.
    My setup is, motorola sbg900 on a cable 80000mbps wireless network, firewall off on my modem, firewall on on my mac (its always been on), Playstation 3(wireless), PC(wireless, but is switched off), another pc which is wireless and also off, nintendo wii off as well, and a baby monitor.
    I have a feeling its nothing to do with my setup(except for maybe port forwarding) but am wondering if it is an update issue bug that needs to be fixed(thats what im hoping).
    One other thing, when my connection drops in the menu bar and i select it to see which networks are availale, my network motorola8566 is not visible, another 'motorola9522' and 'wireless' network is?My prefered networks dont list any of these in system preferences. Then all of a sudden those other networks dissapear, my network is reshown and i can select it no propblems. What gives? Any help would be great, thanx in advandce

    I have the same issue with my wireless connection being dropped. I have the most recent version of leopard 10.5.2 . The other macbook in this household also has 10.5.2 and has no problems with dropped connections. I tried resetting the pram which helped at first until I used my macbook on the battery alone the problem started to reoccur. Help?!?

  • Just downloaded OS X Lion. Now, there's no curser bar to scroll up or down for any of the pages I access....if I use the keyboard arrows for up/down, there is a temporary scroll bar, however it disappears after a few moments. Help!!

    Just downloaded OS X Lion. Now, there's no curser bar to scroll up or down for any of the pages I access....if I use the keyboard arrows for up/down, there is a temporary scroll bar, however it disappears after a few moments. Help!!

    Go to System Preferences->General. There you can set how you wamt thescrool bars to behave.
    If you want to see the scrool bars all the time select Always

  • My ISP requires a http login. I can use the iPad fine if I am logged in on a PC connected to the same wifi network, but if I login on safari on my ipad, the connection drops after some time.. any workaround?

    My ISP requires a http login. I can use the iPad fine if I am logged in on a PC connected to the same wifi network, but if I login on safari on my ipad, the connection drops after some time.. any workaround?

    TJBUSMC1973 wrote:
    The iPhone is working, as designed and advertised.  In this case, the user failed to educate themselves properly, either by proper research or asking the right questions, before purchasing the device.
    I understand that the OP failed to do research. But then, I wasn't replying to the OP. I was replying to Chris. I have Verizon. I can talk and use data at the same time with my Droid Maxx. Therefore, the problem is not just with the network. It would be technically possible for an iPhone to do that on Verizon/Sprint if Apple had chosen to use a different chip, such as the kind other phone manufacturers have elected to use.
    Of course, this is probably all irrelevant to the OP's issue. It was merely a point of clarification, especially for those people who are used to being able to use both voice and data at the same time on Verizon. When they switch to an iPhone, they are often surprized at the limitation.
    Best of luck.

Maybe you are looking for

  • Dual display with Lenovo USB Port Replicator 43R8770

    Hi, I have installed the Lenovo USB port replicator using the 1.0.0.1 drivers.  I am running Windows XP on a Thinkpad X300. I can successfully get into dual display mode but when I try to make the external monitor my primary display it will not work.

  • Service call doubt

    Hi friends,                    I have a small doubt regarding service call in webdynpro-abap. I had a requirement of executing a material change bapi. Firstly I followed the wizard of service call then do the necessary layout building and eventually

  • Acrobat 9 Bug/Corruption

    Hi All, My I work with Acrobat Reader and noticed a corrupted document.  Can anyone explain what can cause corruption in a document?  I had heard there was a known bug in Acrobat Reader 9.   Also get this error when trying to save sometimes. Thanks,

  • Link not restoring backup file

    I backed up and wiped my Q10, now when i try to restore the backup file, Link does not give me the option to restore the file. It lists the available back-ups but does not let me select one (the restore button stays faded out). I've tried both full a

  • HDR Pro Error Message & Abort

    Wanted to see if someone on here knew the answer or had experience with this issue. First off I'm running Mac OS X 10.6.6 PS CS5 Version 12.0.2 Here's what I did: It doesn't matter which 3 photos I select, I have tried lots of different sets with the