Wireless Connection drops when I close my Macbook

I recently hooked up Airport Express as my wireless router - supporting a Macbook, iPhone 4S, iPad, an HP printer and a Nintendo Wii.  I thought everything was fine, and then I noticed that the connection seems to drop when I close the lid of my MacBook (was watching a movie streaming on the Wii through Amazon Instant Video, and noticed the video stopped every time I shut my MacBook).  Any suggestions to alleviate this?
(have not tested yet to see if WiFi on the iPhone or iPad are affected by shutting down the MacBook)
(Environment is a one bedroom apartment, no walls between the Express and the Wii)

Did u solve ur problem, im having the same issue!! and its getting me mad LOL

Similar Messages

  • Wrt160n wireless connection drops when phone calls come in

    I operate 2 laptops on Vista and 1 desktop on XP . I have cable connection for intenet and phone. When a phone call comes in, my connection drops on all 3 computers. Comcast has told me I have the same freceuncy for my phone and internet, therefore, I need to change the frecuency on my modem? or router? using my ethernet cable connected directly to the router (? ).
    I am trying to download the wizard but get no where. I went to the default IP address 192.168.1.1  mentioned in the owners manual, left USER name blank, and wrote admin on password, and can't get in, all I get is Not Authorized.
    How can I manage to change the freceuncy to avoid my connection from being lost every single time someone calls us thru the home phone, or I pick up the phone to make  call?
    Help please!!!

    If the admin password is not working then,you have to reset the router.Reset the router for 20 seconds and then,try to open the setup page..On the setup page,Under the Wireless tab,Change the Channel Width to 20MHz only and Channel to 11.

  • E3000 routers wireless connections drop when gigabit hardwire is used

    I have a very strange but repeatable problem with my E3000 wireless router.  I have multiple devices connected wirelessly such as and iPhone and 3 laptops.  I also have a couple of devices (dvd player and satellite receiver) connected hard wire.  The problem occurs when I  connect my laptop hardwire and uses gigabit speed.  All wireless connection stop working.  When I look in the router at the list of users it show all the wireless devices as being connected via the LAN and not wireless anymore.  When I unplug the gigabit hardwired connection and reboot the router all the wireless devices go back to normal and function correctly.  I am also using MAC security for the wireless devices so when I plug in the laptop hardwire it changes from wireless to LAN in the user client table.  Unfortunately all the other wireless devices do also.

    You have 3 wireless laptops. The wireless connection stops working when you connect the laptop to the Ethernet port on the router.
    Does this happen when you connect any laptop to the router or only with the specific laptop?
    Disable the wireless network connection on your laptop and then connect the laptop to the router with the Ethernet cable.
    See if that works.

  • WRT54GS wireless connection drops on laptop when wired desktop is turned on.

    I've had this router for a few years now and have never had a problem.  But recently my laptop wireless connection dies when my desktop, which is connection via ethernet is turned on.  In trying to fix the problem, I've upgraded the firmware, but that didn't end up working.  I recently upgraded to vista from xp on the desktop computer, so I don't know if this is what started the problem.  I don't recall if this problem started before I upgraded. 
    I don't know what sort of additional information you guys would need to help diagnose the problem, so just let me know and I'll get that info for you.
    Thanks,
    Kurt

    Check under Local Area Conneciton in Desktop that if there is any other connection except Local Area Connection is present ... if so then delete or disable that ...
    Also check that if there is any USB connection from Modem to the Computer ....

  • Wireless connection drops every day -- iTunes 8.02 the problem??

    Hello! Our iMac is connected to the internet via Airport, and we have rarely had problems with the connection. For the last two weeks, when I get on the iMac for the first time that day, I have to reconnect to the wireless network through the Airport Setup Assistant every single time. I've tried resetting our cable modem and Airport -- no effect on the problem. I've tried going into sleep mode without logging off to see if that might help -- nope. I've tried repairing permissions in the off-chance that that might help -- no again.
    In something that seems more than just a coincidence, we updated our iTunes to 8.02 about two weeks ago, and that's when this problem began happening. I am especially suspicious that there's a link because we did not update iTunes on our Macbook and it has no problem whatsoever staying connected to the exact same wireless network.
    Two questions, then:
    -- Is the iTunes 8.02 update the problem?
    -- If so, how do I go back to iTunes 7.7?
    Thanks!

    Hi, I'm new to iTunes and apple, but this is happening to me too! I've got iTunes 8 and whenever I run it, my wireless connection drops (disables itself) and cannot be restarted without rebooting the machine. Did you manage to find an answer?

  • Wireless connection drops out for no reason

    I have a macbook with 10.4.11 update. I had my macbook since october last year and had no problems. About two months ago now i have this problem were my wireless connection drops for no reason, my modem/router shows everything is working normal with its lights on the front panel.
    My setup is, motorola sbg900 on a cable 80000mbps wireless network, firewall off on my modem, firewall on on my mac (its always been on), Playstation 3(wireless), PC(wireless, but is switched off), another pc which is wireless and also off, nintendo wii off as well, and a baby monitor.
    I have a feeling its nothing to do with my setup(except for maybe port forwarding) but am wondering if it is an update issue bug that needs to be fixed(thats what im hoping).
    One other thing, when my connection drops in the menu bar and i select it to see which networks are availale, my network motorola8566 is not visible, another 'motorola9522' and 'wireless' network is?My prefered networks dont list any of these in system preferences. Then all of a sudden those other networks dissapear, my network is reshown and i can select it no propblems. What gives? Any help would be great, thanx in advandce

    I have the same issue with my wireless connection being dropped. I have the most recent version of leopard 10.5.2 . The other macbook in this household also has 10.5.2 and has no problems with dropped connections. I tried resetting the pram which helped at first until I used my macbook on the battery alone the problem started to reoccur. Help?!?

  • Wireless connection drops after time. Please assist.

    Hi
    My problem is that my wireless connection drops every 5-15 minutes.
    I don't know all the relevant info to give.  If there's something I can post that will help let me know and I'll reply.
    I've used netcfg to configure my network.  I have a Canyon CN-WF511 wireless card.
    I load the following 3 modules in my rc.conf;  rt2500pci rt2x00lib rt2x00pci.  I think those are the only ones pertaining to my network card.
    When it drops I just netcfg -a then netcfg default (profile name) and it works for another few minutes.
    Below is my network profile.
    CONNECTION="wireless"
    INTERFACE=wlan0
    #IP="dhcp"
    #DHCP_TIMEOUT=20
    IP="static"
    IFOPTS="192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    GATEWAY=192.168.0.1
    #DOMAIN=localdomain
    #DNS1=192.168.0.1
    ESSID=default
    SECURITY=none
    SCAN="YES"
    TIMEOUT=15

    The easiest solution might be to setup NetCfg somehow with your wifi card and access point.  Have you tried that?  Can you find your card's chipset on the wiki?(chances are that your particular chipset will need a firmware put into /lib/firmware.  Again that's found on the wiki on the NetCfg or Wifi page, I forget which sorry.)  Those are two places where I'd look for good information.
    By the way, your rc.conf is way out of date.  You should look at updating it by using the recent rc.conf.pacnew file that you'll find in the /etc directory.

  • Wireless connections drops after AirPort Extreme 2007-001 Update

    Hello, I am getting a lot of wireless connection drops since I installed the AirPort Extreme 2007-001 Update. Anyone has similar issue? Any fix?

    Well, I was conneting to the University's wireless server (which is maintained and huge) flawlessly prior to the update. My friend has a macbook pro and didn't apply the update and he has no problem. I installed the update and since then I'm having a hard time connecting to ANY wireless server/router.
    I came across the following, looks like a lot of other persons are having the same issue:
    http://www.macfixit.com/article.php?story=20070202141024604
    http://www.macfixit.com/article.php?story=20070126190822382
    Looks like my solution would be to perform an Archive & Install and to not reinstall the AE 2007-001 update.

  • 10.5.2 failed to fix wireless connection dropping problem

    10.5.2 did not fix wireless connection dropping problem. I lose wireless connection whenever my MBP restarts or wake up from sleep in the building where I am and have to retype password about 10 times a day. I had not had this problem when I used Tiger. Everyone who has upgraded to Leopard or has it installed on their Mac is experiencing the same problem. Is there any solution or trick to resolve this problem? Thank you.
    Message was edited by: FrenchQuarter
    Message was edited by: FrenchQuarter

    Amularya,
    Please read the post I made in this thread earlier. No less than a dozen solutions are offered in the link I provided for wireless issues. Troubleshooting wireless issues requires individual attention because of the plethora of issues which can't be tested for. So please start a new topic thread here:
    http://discussions.apple.com/forum.jspa?forumID=1225&start=0
    So you can get a wider audience, and won't confuse the original poster with solutions that don't apply to them.
    There literally hundreds of different WiFi adapters.
    Dozens of different virus and firewall combinations.
    Possibilities for damaged WiFi cards and routers, as well as routers whose firmware is not to spec with the latest wireless standard.
    To top it off, bad RAM, hard disk being too full, and bad preference, cache or or logfiles can make various aspects of the operating system misbehave, and/or even the directory leading to those files.
    Until each person starts their own thread looking for solution individually, chances are they won't find one. Yes, 10.5.2 addresses WiFi for some people. Obviously it doesn't for everyone. The point is, there are some people, like myself who have never had a WiFi issue either with Intel or PowerPC Macs that they couldn't resolve without a little bit of troubleshooting. I'm happy to help you walk through it, but only if you start your own thread asking for help.

  • If 3G connection drops when using dictation, will the dictation be saved?

    If 3G connection drops when using dictation, will the dictation be saved so that it can be used later?

    If you mean a voice recording that get transcribed, no.

  • Wireless connection drops at random

    Hi,
    I have a 27" late 2011 iMAC. Since I updated to Lion my wireless connection drops at random. The wireless symbol shows that I am connected, but i cannot use the internet.
    The sollution at that time is that I turn off wireless, and than turn it on again. This solves the problem, but only temporarely. Since I also own a NAS for TimeMachine backups, the dropping of the connection is annoying because the backups fail most of the time.
    What is causing this problem. I have 2 windows PC's and the connection stays. Router has latest firmware (fritzbox 7340), and my mac is up to date.
    Please help.
    Thanx in advance.

    Hi,
    try to change the WiFi channel on your fritzbox, sometimes it works better on higher channels 11, 12, 13 especially if there are Telekom routers in your neibourhood. Make sure to use the latest Firmware for your Fritz!Box, the actually had a few issues in this area a few months ago. If this still does not help, only activate the 2,4 Ghz Bandwidth on the Firtz!Box and deactivate de 5 Ghz option.
    I hope that this will solve your issue.
    Cheers

  • Connections drop when using Cisco Anyconnect Secure Mobility Client

    Folks I have a strange issues. I have a few laptops that I'm testing using the Cisco AnyConnect Secure Mobility Client Network Access Manager. We like the interface and overall are happy, but have one nagging issue. Periodically the connection drops when using the client, and the only way to reconnect is to choose the Network repair option on the client. That fixes it just fine, but we shouldn't have to do this. The same clients using the built in WIndows supplicant do not have this problem. We are on version 3.0.07059.

    Right now I'm testing on a single access point (autonomous) with WEP! The same laptop works fine without the Cisco client. Usually it is several hours, 12 or more when it happens, but I've seen it less than that. And I've seen it up for over a day and a half. At this point I just don't trust the client to roll out to a larger audience.

  • No wireless connection option when i set up my apple tv even though wireless is working at home. No option under settings to set up wireless connection. Does it mean wireless is broken?

    No wireless connection option when i set up my apple tv even though wireless is working at home. No option under settings to set up wireless connection. Does it mean wireless is broken?

    What do you see under settings?
    Do you have a network setup?
    1. Network Configuration
    Have your network password (if you use one) and your Apple Remote handy to configure your Apple TV. Make sure there are no obstructions between the remote and Apple TV. Read more about using and troubleshooting the Apple Remote.
    If you:
    Use a wired Ethernet network to connect, Apple TV automatically detects your network.
    Use a wireless network to connect, Apple TV helps you select and configure your network connection.
    Connecting to Your Wireless Network
    Apple TV will help you connect to your wireless network. If you use a password to access your network, have it ready. Use the Apple Remote to:
    Select your network from the list, or enter your network name if the network is hidden.
    Enter your password (if you have one).

  • Broadband connection drops when a phone call is re...

    Hi
    I am new to this forum so please let me know if I don't supply all the necessary information.
    For a couple of months now we have had a consistent problem with the broadband connection dropping when an incoming phone call is received, prior to this it had been fine for a long time.  After making the normal user checks, as recommended by BT, the problem persisted.  A BT engineer visited my house and was able to reproduce the fault at the master socket.  He traced the line back, via the manholes under the street to a connection box outside the village.  After working hard for four hours he seemed to have fixed the fault and was able to demonstrate streaming video uninteruppted by an incoming call.  He told me that he had solved the problem by re-routing the line, he also replaced the mark 2 router with a mark 3 router.  Twenty four hours later the problem returned and is again absolutely consistent - even with just the router connected to the master socket the broadband light will go out when an incoming call is received.  On phoning the helpline I was told that there was a problem at the exchange, which should be fixed within 24 hours, but it wasn't and I didn't hear back.  Further investigation showed that both of these issues had been marked as resolved.  We are a long way from the exchange and have had a history of problems with both the line itself and the exchange.  In the past the hard working BT engineers have always managed to get things sorted out when they have visited.
    This time I am struggling, as I can't seem to find the right approach to BT to persuade them to build on the work that the engineer who came out so recently did - I always seem to end up describing the problem from the beginning and then being told that it is my internal wiring that is at fault, nobody will acknowledge any of the work that has been done by the engineer that visited or the person that approached the exchange.
    Sorry for such a long post, but it is very frustrating - I have considered changing the phone number so that nobody can make any incoming calls, but then I would have no phone!!
    Any ideas would be gratefully received.

    Hi John
    Thank you for your very prompt response.  Clicking on that link does not show up any problems in my area or with my line.  I have limited technical knowledge, but what you say about high resistance does fit the facts.  We have had a lot of problems over the years, most of which have been traced back to faults between the box at the edge of the villagae and our house - we have had the line replaced more than once, although I'm not exactly sure what that involved.  In the past the fault that recurred was very slow speed and dropping of the broadband connection, this is different now in that the speed is actually now quite good for our area, but the connection drops when a phone call is made or received.  I did have the fault logged with BT, but it has now disappeared from "track faults" without being resolved.
    When everything is working it is a very good service.  My friend in an isolated village in North Wales had BT broadband as soon as his local exchange was enabled.  It has provided faultless service ever since, at a higher speed than I can get on the outskirts of a major city.
    Thanks for the support, it has made me feel much less isolated - I'll keep reporting it.
    Regards
    Richard

  • Wireless Connection Dropping on MacBook Pro

    Hello,
    I have been running into an issue with my Macbook Pro dropping wireless connection to Alcatel Wireless access points. It happens when I disconnect AC power and run off of the battery. It usually drops the signal a few minutes after that. I have run all the updates and it still seems to be happening. We can tell when it drops because we are kicked off of a Filemaker remote database. Has anyone else run into this issue?
    Thanks!

    macsat wrote:
    I narrowed down the issue some time ago, but still it haven't been fixed (not even in the 2007.04 wireless update):
    http://discussions.apple.com/thread.jspa?messageID=4854252&#4854252
    Please beware that Pacifist-based "fixes" like that advocated in the thread in question above have two notable downsides:
    1) You will remove certain functional and security fixes from your system.
    2) You may break future software updates as your system will be listed as having some software installed that no longer is installed.
    I understand the frustration, but if you choose to "fix" your problem in this way, beware it is not without danger and may cause you future issues.

Maybe you are looking for

  • Is It possible to connect to Itune by bluetooth?

    Hi, I'm tryiing to connect by Bluetooth my Ipad to my PC Windows7, but only can have a connection for audio, is it possible to have data connection? Regards.

  • PALM TX WON'T START.

    Hello All. After my last HotSync my Palm TX appears to have lost all of its information and now continually tires to start up but with no success. It powers up and then shuts off only to start the process over again. I have tried resetting both soft

  • Loading Firefox 8 I get "Firefox8.0.1 is not a valid Win32 application"

    Last night I used PCTools to clean up my system. This morning I could not get Firefox to run. (In fact my entire system is running at glacial speed.) I went to IExplorer and downloaded Firefox 8.0.1. When I tried to run the installation I get "Firefo

  • Installing oracle dev suite on linux 5.3

    Hi team can some1 help on how to install oracle dev suite on linux i'm gettting an error on could not ecxecute auto check for display color using command check if the display variable is set

  • How to view PSU info in shell?

    I tried this link: http://www.cyberciti.biz/tips/querying- - rompt.html Using dmidecode --39 only gives this: > sudo dmidecode --type 39 # dmidecode 2.11 SMBIOS 2.4 present. No info about the PSU. I have sensors working but nothing about the PSU in t