Wireless connection lost between my router and printer (hp officejet 4620)

My hp officejet 4620 printer has been working fine but now the wireless connection has been lost and I can't get the wireless connection back. The blue light for the wifi flashes blue. I can't get the connection back between the router and the printer because my wifi is actually working fine with my laptop. Any suggestions about what i can do to get the connection back so I can print again?
Is it something I need to do on the printer screen or laptop to fix the problem?

Have you powered off everything and power up again?  Power off printer and router.  Power on router and wait 2 mins.  Power up printer and see if it connects to your SSID.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • Wireless Connectivity problem between BT HomeHub and AirPort Express

    Hi Guys,
    I'm new here, and have just bought my 1st Apple product!
    I'm afraid I haven't had a very good start though, and would really appreciate some assistance please.
    My problem is with connecting my Apple AirPort Express ("APX") to my BT HomeHub ("BTHH") wirelessly, whilst also being able to use the internet. I can only get the internet to work, whilst also streaming music from itunes to APX, by connecting the APX to the BTHH via an Ethernet cable. Perhaps I should state my equipment:
    *Room #1*
    Computer: Laptop
    Operating System: Windows XP, Service Pack 2
    Modem: BT Homehub (the curved version with blue lights)
    Above Connection Method: Wireless.
    *Room #2*
    Hi-Fi (Linn)
    Apple AirPort Express
    Above Connection Method: Digital (mini to regular toslink).
    *What I Want:*
    - To be able to wirelessly connect to the internet (PC to BTHH)
    - To be able to wirelessly stream music to the APX from iTunes
    - to be able to do both of the above simultaneously.
    Problem:
    Once my laptop has found the APX network, as soon as I then connect to it, my BTHH internet connection disappears. or the APX disappears and I have to do a factory restet before my computer can discover it again. (It leaves me having access to only one network or the other). Hence, I cannot stream music to the AirPort and use the internet simultaneously. One or the other. I am trying to "Join an Existing Network" via the AirTunes software.
    Very depressed as I don't know much about networking and had hoped it would just configure automatically. I have fiddled but it always loses the presence of the AirPort altogether until I do a factory reset for it to reappear as an available wireless network again.
    Please please help a struggling newby - anybody got an idiot's, step-by-step guide to the perfect settings? thank you to anybody who can assist.
    Message was edited by: kerrnice

    Is no one able to help me please?

  • HT1222 ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : Bambangtjio@yahoo.o.id) Thanks

    ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks

    Hi,
    Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
    the Problem report.
    When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
    "native" windows drivers. Now, every major PC company has there own version
    Thus the problem report.
    There is  rather involved and lengthy procedure to check and install the correct Bluetooth drivers
    in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
    Here is what I propose;
    The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
    try apologizing to it and that you'll never never do it again, what ever it takes!
    Make the best investment you can make for your Blackberry, buy a media card.
    All the memory in the BB is dynamic, this facilitates the functions of the phone.
    By storing media in that memory, you effect are wasting X amount for file storage.
    Store all media and files on the media card, and you will have a smooth running device.
    They run about $25.00usd, they are easy to install, and they also make moving your
    media a snap. You will need the USB adapter that came with it, but you can get that at
    your local carrier store.
    So if you agree with this I need some info.
    On the Blackberry go to the options icon,click then scroll up to ABOUT.
    I need your software version number, it's listed in this format: 4.x.x.xxx.
    Send it back to me and I can tell you what size card you can get.
    Let me know your thoughts!
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • I have an ipad first generation.  I am trying to connect to a linksys router and it is not finding the wireless network.  what do i need to do?

    I have an ipad first generation.  I am trying to connect to a linksys router and the ipad is not finding the wireless network.  What do I need to do?  Thanks for your help.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • OfficeJet 8600, offline wireless connection lost;

    i have an officejet 8600  that ive been having about a year its connected to my pc wirelessly, i am running windows 7 on pc, every so often my pc will say that my printer is offline but the printer says it is still connected to the network i have printed the Network Configuration Page from the printer and everything is the same as before...IP Address same...I read some answers to previous questions that said to go into advanced settings and change the IP Settings from Automatic to Manual...I've done that with no result....I have also restarted Router, Printer, and PC....I have even disconnected power to all 3 and then reconnected with same problem....can someone please help me....
    Thanks
    Jami 

    Let's set a static IP address in this manner for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Do I need the same ip address for my computer, router and printer?

    Do I need the same IP address for my computer, router and printer?
    I am trying to reset my router. I have had a lot of problems with "no connection" to my wireless printer. I reinstalled the software and it works for a while.
    Also, lose connection a lot on my laptop or it says I am a guest. My cable provider said it is my router.

    A typical convenient-sized "block" of addresses commonly used is just under 256 addresses. The router almost always is at location xx.yy.zz.1
    By default, DHCP will pass out addresses starting at the next address, xx.yy.zz.2 and keep going up toward 254.
    By convention, the Address at the end of the range ( xx.yy.zz.255 in this case) is a "magic" address used for broadcast messages, and must not be assigned to an actual device.
    To talk to each other easily, the Addresses must "match" in the first three octets of their address, and be different in the last octet, as the above examples do.
    When you produce a reference outside that range, such as asking for Apple's web page at:
    http://17.149.160.49
    It is sent to your Router, which acts as your "agent" in dealing with the Internet. The Router hides your computer's local address and uses its own Public address (provided automatically by your ISP) so send out packets on your behalf, and listen for the answering packets coming back.
    When you use a Router that you control, your computer cannot receive unsolicited queries from the Internet at large because the Router's Firewall discards them. Having a Router that you control means you already have the protection of its Firewall, and need not enable the Firewall built-into your Mac.

  • I've set up email on my iPad (talk mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this

    I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?

    I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?

  • What's the difference between transport route and transport layer

    what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

    Hi,
    Transport Layer in ABAP Workbench
        The Change and Transport System supports the distribution of development
        work on large projects across multiple SAP Systems.
        The packages in each development system are grouped into one transport
        layer.
        The transport layer determines whether objects are assigned to a local
        or transportable change request.
    Use
        Each of your SAP development systems is assigned a transport layer as
        its standard transport layer. If you use Extended Transport Control, you
        can assign different standard transport layers to certain clients.
        You can define at the most one consolidation target for each SAP System
    and transport layer.
    When you create a package, it is assigned the standard transport layer
    of the SAP System.
    If you want to assign a different transport layer to a package, you
    require the administration authorization for the Change and Transport
    System.
    The objects in a package automatically have the transport attributes
    defined for the corresponding transport layer.
    o   If a consolidation route originating in their SAP System is defined,
         then the objects are assigned to a transportable request, and
         transported into the consolidation target when it is released.
    o   If a consolidation route is not defined, the objects are assigned to
         a local request, and are not transported.
    Customizing settings are not assigned to a package. They have the
    transport attributes of the standard transport layer of the system or
    client.
    It is best to assign a package a standard transport layer for which a
    consolidation route originating in the development system is defined.
    To display and maintain the transport layers and routes, use the
    Transport Management System (transaction STMS).
    Only the system adminstrator can make changes.
    Caution:
         The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
         Release 4.0A and cannot be maintained.
    Regards
    Ben

  • Differences between rate routing and reference rate routings?

    Hello PP members:
    I would like to differences between rate routing and reference rate routings
    Thanks for your time,
    Thanks Again,
    Suren R

    Hi Mr.Suren,
    As explained by other friends Routing is used in Discrete manufacturing and Rate routing is used for REM-Repetitive manufacturing.
    In addional to these types SAP has given 2 more types
    1.Reference operation set -Used in Discrete manufacturing.
    2.Reference rate routing - Used in REM.
    If similar rate routing is been used for producing many materials,then instead of entering(these steps) in rate routing of each  material you create a refrence rate routing and you enter the work centres used and the other details.After saving you get a group counter number showing reference rate routing is saved with group XXXXXXXXX.
    When you are creating rate routing for a material say A ,after giving the name and plant details in the top you will be able to see an icon "copy from" and you can select the radio button for reference rate routing and give the group counter number. or else without giving it here you have got an option to select the reference rate routing after entering into the operation screen also.
    In that particular page in operation overview screen,there will be an icon copy,there you can click that icon and you can give the reference rate routing group counter number and very easily you can create rate routing for N number of material.
    Likewise you can use reference operation set while creating routing for a material in Discrete manufacturing.This basically reduces the time in creating routing or rate routing for materials in Discrete & REM respectively
    CA01,CA02,CA03-Create,Change,display (routing)  respectively.
    CA11,CA12,CA13-Create,Change,Display reference operation set Respectively.
    CA21,CA22,CA23-Create,Change,Display rate routing respectively.
    CA31,CA32,CA33-create,change,display reference rate routing resp.
    I hope this will help you.
    If useful reward your points.
    Thanks & regards
    Karthik.

  • Diff. between transport route and transport layer

    hi gurus,
                 What is the Diff. between transport route and transport layer.
    Regds:
    BBR.

    No interview questions
    Read the "Rules of Engagement"
    regards
    Juan

  • How to find rfc connection exist between R/3 and APO ?

    Hi all,
    i wanted to find out...
    rfc connection exist between R/3 and APO ?
    kindly help in this regard..
    Thanks
    Joshi

    Hi Sridhar,
    If u have access to SM59 transaction then u can check and test the connection there it self.
    If u don't have access then check the table RFCDES where all RFC destinatios defined for your system is stored.
    Thanks,
    Vinod.

  • How to change the language in my printer hp officejet 4620?

    How to change the language in my printer hp officejet 4620?

    Hi,
    You can change the settings in the Control Panel. Check from page #13 of the following document:
       http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03251656/c03251656.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Lost wireless connection on a wrt110 router!

    Oh HELPPPPP!   I lost my wireless connection last week, it just vanished!  Called Dell they couldn't figure it out, I worked on it I can't figure it out.  It was there then it was just gone!!  All drivers are updated, but I keep getting the error message " the network adapter intel(r) wifi link 4965agn is experiencing driver or hardware related issues"  ...   This is driving me nuts, any suggestions???

    Well, this problem is not related with your Linksys router. It is driver error on your computer. I would suggest you check the Device Manager in WIndows to see if your wireless adapter in your computer was installed properly. If it shows a yellow triangle in the device manager you have to reinstall the driver.

  • Connection lost between Nokia 616 Car Kit and a No...

    I recently upgraded from a Nokia 9300 to an E71, but retained my Nokia 616 Car Kit. The Nokia website confirms that the E71 and 616 are compatible. My E71 has been paired with the 616 and configured as User 1 in remote SIM mode. The E71 Bluetooth settings have been set up so that it will connect automatically, without asking authorisation every time.
    The E71 connects to the car kit without a problem, when the car is started, but often looses the connection during the trip. The 616 will then display “Connection Lost”, followed by the request “Reconnect to User 1?”. Strangely the black “User 1” phone icon is still displayed in the top right-hand corner of the 616 display. When I push the Navi Wheel it attempts to reconnect, but every time it comes back with the message “User 1 Not Found”, despite the fact that the phone has not been moved and is still less than 1m from the 616 controller. I can only reconnect after the vehicle had been switched off and restarted, i.e. when the 616 reboots.
    Why does it frequently loose connection? A number of times I have noticed that it looses connection when I drive through an area with no or a very weak cell phone signal. I don’t think the cell phone signal strength should have an effect on the Bluetooth connection between phone and car kit.
    Why won’t it re-connect? I can’t stop and switch off the car every time the connection is lost!
    Any help will be appreciated.

    Hi, I have bought a car with this equipment and I have the same problem.
    I tried following:
    PAIRING:
    - first from the phone discover Bluetooth accessories - it will find the N616
    - enter the code to the phone
    - N616 ask for the same code as you enter to the phone - enter it
    After this, the phone is paired, but not connected.
    CONNECTING:
    - then set up Bluetooth in the phone as visible
    - try connect (as user 1 or user 2) from N616 to the phone - you do not need to specify which phone has N616 to find - it will find your phone if it is visible (one step before)
    - if everything is OK, your phone is connected
    - you can access the menu, reset N616 to factory settings - but you need to make all steps again
    This list works for me, any other steps not...

  • Connection lost between SA520 and WAP200

    Hi guys!
    I have a problem with the connection between a SA520 and a WAP200. Following scenario exists.
    SA520:
    two VLANs configured with following settings:
    VLAN1: 192.168.167.1/24
    VLAN2: 192.168.2.1/24
    VLAN1 is for a dedicated network for some private computers connected to port one to four of the SA520
    VLAN2 is for guests and bound to the optinal port of the SA520.
    inter VLAN communication from VLAN1 to VLAN2 is activated.
    One WAP200 is directly connected via ethernet cable to the optional port of the SA520 with following IP: 192.168.2.240/24. Two further WAP200 are existent and repeating the signal to increase the range of the W-LAN.
    Now, if I ping from a computer within VLAN1 to the IP of the WAP200 (192.168.2.240) I get replies from that device. But after some amount of pings the connection between the two devices will be lost (no replies), and after 4 to 10 seconds the connection will be restored again. The weird thing is that I wasn't able to discover a reproducible scenario to hang the connection. Some time the connection between the two devices lives for ten minutes and some times it will break down after 30 seconds.
    Does anybody have a hot tip where the fault for this behavior can be?
    Thanks in advance and best regards

    The Connector 1.0 spec does not provide any API's for testing a connection. The 1.0 RA's dont provide any testing capabilities to allow the container to do so. Even if some 1.0 RA's provide such capabilities, the container cannot rely on these non-standard features. So the container cannot really gaurantee that the connection handed to the application is good. There is no way to know unless the application uses it. The Connector 1.5 specification provides API's for test connections.

Maybe you are looking for