Wireless connection not detected by networkmanager

Something wrong with my network connections. I've done this like a hundred times (I'm pro at messing up my system and reinstalling) but this time just cannot figure out, gnome netwotk manager installed somewhat broken. because everytime i hit "cancel" on any gui it crashes. and wireless tab does not show any devices availible, however iwconfig shows that everythins is fine.
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=27 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I did disabled (!network) and put networkmanager in rc.conf

check daemon.log to see if it's the daemon that's having issues. If not then it's the applet that configures the daemon, you can try starting the applet from terminal (nm-applet) to catch any possible output.

Similar Messages

INTERNET CONNECTION NOT DETECTED message with Crystal Reports 2011

Hello:
We upgrade from SQL 3008 R2 to SQL 2012 SP1. Had trouble with Crystal Reports not opening reports. Information on the internet indicated that you had to reinstall Crystal Reports after upgrading SQL. We did a repair of Crystal Reports 2011. I have the box checked to check for updates when Crystal Reports starts. I am now getting INTERNET CONNECTION NOT DETECTED and the application will not check for updates. We have tried turning of the firewall and almost everything else we can think of. I have access to the internet from that server and IE9 works just fine. Can anyone help, please.
Thank You,
Jack G.

Hello Jack,
This one helps: INTERNET CONNECTION NOT DETECTED
Internet Connection failure
--Dhana

Re: Canon IXUS V installation - Camera connection not detected

I have installed this driver from the Cannon website but when I connect the camera I get a message saying " Camera connection not detected" followed by an error message saying pscN109 has stopped working.
Then a Microsoft message saying no soloution found. Can anyone help me?

Jeffrey
The reason I posted it on the Toshiba forum is that whilst I have downloaded the correct driver for Vista but there is a compatibilty issue between it and Vista. Microsoft don't want to know as the Vista was supplied with the computer so they said contact the computer manufacturer

Wireless connection not working

For no apparent reason... I am getting this message "the settings saved on your computer for the network do not match the requirements of the network".
I reset the router, checked all the connections to the modem etc. and went through the setup again and I am still getting the message that my laptop is not detecting the router.
This router has worked without fail for several months and this problem seemed to begin for no apparent reason. I am not clear if this is a problem with my laptop or my router...Help please!

That means the password for the wireless has been changed. Remove the wireless profile and reconnect to the wireless network.
The box said windows xp or better... So I installed Linux!

Wireless connection not working after installed newest Lenovo ThinkVantage System Update programs

Hi, everyone!
I've installed some newest programs through Lenovo ThinkVantage System Update and just after that my wireless connection has stopped working. Here are the installed programs:
ThinkPad UltraNav Driver for Windows 32-bit version 15.0.24.0;
ThinkPad Power Management Driver version 1.60;
ThinkPad Modem Adapter version 7.80.8.0;
ThinkPad Hotkey Features Integration Package Setup version 3.11.0001;
Inter Wireless WiFi Link for Window XP version 13.02.0000;
ThinkVantage Access Connections for Windows XP version 5.62;
ThinkPad Power Manager version 1.88;
Lenovo ThinkVantage Toolbox (32-bit) version 6.0.5514.61.
I've got a Lenovo T61 with Windows XP SP3.
Also in Device Manager, there are now the two "Other devices" bellow with a yellow question point and a yellow exclamation point by side:
Bluetooth Hands-free Audio;
Bluetooth LAN Access Server Driver.
Does anyone have any idea what can be done to have these issues solved?
P.S.: when I click Fn+F5 it shows only the Bluetooth Radio.

Hello and welcome,
I've seen something like this on XP machines after updates a couple of times now - my T61, a friend's T400, and his daughter's T61. I guess that makes 3
_Maybe_ your situation is the same.
The fix in all 3 cases was to go to device manager and uninstall the wifi driver. Then scan for hardware changes and let it reinstall the driver. Something about how Access Connections or some other networking mangement thingy was hooking the drivers I guess.
On both of the friend's machines, the wired networking was also b0rked. Same fix there.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Wireless connection not restored immediately after sleep

Hi,
Since I have updated to Mavericks (OS X 10.9.1), my wireless connection doesn't restore automatically anymore after sleep.
This recently also started to happen when I boot my computer. I always have to click the wifi icon, select my network and then it still says "can't connect to network".
When I click the wifi icon and select my network a second time, it works.
I have tried setting the order of network services (WiFi first, then Bluetooth and finally Thunderbolt bridge), deleting my saved home network and adding it again, deleting all other saved wireless networks.
What can I do to fix this?
Thank you.

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. Repair permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reset the System Management Controller.
9. Reset the PRAM.
10. Reinstall OS X.

WIRELESS CONNECTION NOT ALLOWED

My WRT160N router will not allow me to connect via WI-FI. On the Linksys EasyLink Advisor...it will not even allow me to select "Wireless Connection" as an option under "Select a Connection Method.
HELP!

pbireton,
What is the operating system of your wireless computers/devices that were not able to connect to the network? I suggest that you set the router's wieless settings. Go to http://192.168.1.1 leave the username blank and type admin as the password. Then go to Wireless tab, set it to Manual and change the Channel to 11. You may actually use other channels like channel 6, 1, 9, and other channels. Choose the onw with the best result.
You may also check this page.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3759

Wireless router not detected

I recently purchased a WRT54G router and tried to connect through my DSL connection. An error message came up and stated that the router was not detected. Repeated tries gave the same results.
I know that the cables were connected correctly.Can someone suggest trouble shooting?Calls to Linksys support have been unsuccessful.

Try disabling all firewalls on the computer, windows and any other you might be using. Still no luck try doing manual setup, as follows:
Connect modem to internet port on router, and connect computer to port 1 on router
Login to routers setup, by typing http://192.168.1.1 in internet explorer's address bar, use admin as password there without any user name
Here goto mac address clone in blue bar at top
Enable service, click on clone my pc's mac button, and save the settings
After that turn off modem and router, turn on modem first.
Turn on router after some time
Check internet if works

Ethernet Hardwire connection not detected :(

Hey all
I was not sure where to post this but I believe it has to do with screwed up settings within my network preferences. For several month I was using a hardwired Ethernet connection to access the Internet and just recently my MacBook stopped recognizing there was a connection. I have tried several different cables to no avail and when a PC is plugged in, the connection is detected which is why I think it may be an issue with my settings. Any idea how to fix this or revert back to default settings?
Thank you so much

HI,
Your profile indicates you are running 10.4.7 but you posted in the Leopard forum. If indeed you are running 10.4.7, you need to update your system software.
Try repairing disk permissions. Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Equium M40x - Wireless Connection not working

I have recently changed ISP from Orange to Virgin [cable] I was using the Orange provided Livebox with my Laptop and there were no connection issues. Virgin have supplied me with a Netgear WGR614 wireless router.
Now my Equim will not connect to it. Can anyone offer a newbie some help or advice? Is there a driver update needed or will i need to purchase a new wireless card for my laptop? Currently my wireless network connection is via an Atheros AR5005GS.

Do you see the wlan of your router and can you connect to it? Remember, you have to enter encryption key again for your new router.
If not, I think the trick with Netgear router is, to enable wlan functionality.
To do so, you have to connect router with normal lan cable. Then enter IP adress of router in internet browser, you can find this information in manual with username and password too.
Try this, as I don't know what exactly is your problem with your wireless connection.

N100 wireless device not detected in XP reinstall

My N100 originally came with Vista and was downgraded to XP. I recently had to reinstall Windows XP and the 802.11 abg wireless device is not being recognized by Windows XP. Is there a device driver that needs to be downloaded? I've looked at the downloads, but I'm not sure I found anything that would relate to my problem. Thanks for your help.
Solved!
Go to Solution.

I found the answer. I downloaded the Braodcom Wireless Lan Driver for Windows XP 3000 C200, N100 and followed the instructions. My wireless adapter is now recognized and the wireless connection is working well.

Wireless connection not visible on Vista laptop using Time capsule

Change setup with Time capsule 1 TB, all MAC PC's work perfectly with wireless connection, except Vista laptop.
Vista discovers all other wireless connections except the one from Time capsule.
On advise from forum, changed Airport settings :
- Radio mode = 802/a - 802/g"
- Wireless security to "none"
Which other setting on Vista prevents at least discovering the wireless signal ?
Thanks for your support !
Pascal

I believe the problem has to do with some potential compatibility issue between the SP3 update and the currently installed Boot Camp drivers. Did you make sure that you (re)installed the latest Boot Camp drivers after you performed the SP3 update?
(ref: Apple Support: Installing Boot Camp drivers)
Also, the following firmware update may help as well: MacBook EFI Firmware Update 1.1

Wireless suddenly not detecting networks

Hello,
My iMac G5 has suddenly stopped detecting wireless networks (or does so very sporadically). I have an intel iMac beside it which continues to detect all of the usual networks without a problem, so I'm not sure what this is indicative of. The network of interest is hidden so I tried connecting manually, but this only yields an error when I try it.
It started this morning when I woke the computer from sleep and it didn't regain its connection automatically as it normally does. I tried several things without success and finally restarted the computer whereupon the wireless signed on as usual (I only used it for a few minutes before leaving though). After coming home later in the day, the same thing happened, only this time a restart did nothing to solve the problem. I ran some maintenance tasks and relaunched the finder. In the airport menu, I saw a few networks for an instant and then they disappeared. Attempts at signing on to my hidden network give me an error again. For whatever reason it let me sign on all of a sudden and I got a few minutes use before the connection disappeared entirely again. My girlfriend was happily using the network on my other iMac this entire time so I know it wasn't the network.
The airport card is detected by the computer, so does this mean there's something wrong with my antenna?
Any help or suggestions would be greatly appreciated. Thanks!

It could be the antenna but that rarely fails.
If your iMac G5 has the removableAirPort Extreme card, you could check the antenna wire connection to the card using the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card.
If that is OK, I would suspect that the RF section of the AirPort card in your iMac G5 is failiing.

IPhone 4s with iOS 8.1: Wireless networks not detected

My iPhone has ceased to detect any wireless networks. When I am trying to turn WLan off and on again, the settings app is extremely slow or hangs or the phone crashes and reboots.
I have reset the network settings several times with no improvement. I have mad a soft reset with no improvement. Does anyone have any ideas how this might be solved?
Thank you!

I had to do a complete reset of my iPhone 4s for another reason (the new iTunes could not access my Phone...). Afterwards wifi networks could be detected more often, even connection was possible sometimes. However this connection still is very unstable and frequently interrupted when used.
Just now, the iPhone rebootet while I was making a call... These wifi problems are just the top of an iceberg of problems I am having since I've installed iOS 8
I sincerely hope the announced 8.1.1 solves them (but I don't really believe my iPhone will ever be what it used to be). I doubt an iPhone is the right purchase for my next phone. There are other manufacturers out there who dont' force their customers to use a malfunctioning release of their operating system. I am talking about signing: It isn't even possible to downgrade and install a working os.
Apple, I loved you so much because you had beautiful products that work seamlessly. With iOS 8 you broke my heart. My iPhone is now a beautiful and useless brick of electronic garbage. From this day forward, I shall regard you as just another hardware manufacturer selling your products at unreasonable prices. Good luck with that. The question if you are able to uphold quality, innovation and design of your products without Steve Jobs has now certainly been answered.

HPE-475a wireless card not detecting networks

For the last few months, every now and again, my computer would start up but be unable to detect any wireless networks. It seemed that simply shutting it back down for an hour or so would magically resolve it. Some research at the time suggested that it was unable to detect a driver for some reason.
However, today, several hours of the computer being off has not resolved the issue, and the device manager suggests that the card is working fine, without any driver troubles. Perhaps I am looking at the wrong thing.
I have been able to connect using an old wireless dongle, but I don't want that to be the permanent solution.
What can I do to better diagnose and resolve the issue? I've searched a bit but couldn't find anything which seemed specific to this situation.
Product name: HPE-475a
Product number: BU082AA#ABG
Operating system: Windows 7 Home Premium Service Pack 1
Error messages: None.
Recent changes: None.
Troubleshooting performed: Attempted to "Diagnose" through Network Connections. It suggested to check the router. The router is fine, multiple other devices are able to connect. Diagnostics then says it cannot resolve the connectivity issue.
Thanks in advance!
- Phil.
This question was solved.
View Solution.

Hi,
If WIFI was working fine using the current router then the mixed mode setting is not the problem.
If Device Manager shows no errors and you cannot connect using wireless then the WIFI adapter card is, most likely, the problem.
Good to hear you have an extended warranty.
Contact HP Support.
Jaco
Errare humanum est.

Wireless connection not detected by networkmanager

Similar Messages

Maybe you are looking for