Wireless connection of a Macbook Pro to a PC wired to a cable modem

Hi all, I am planning to connect my new Macbook Pro to a wireless network that I will be setting up in my home. Currently I use a wired DSL cable modem that is connected to my PC. My Macbook Pro will be downstairs (wireless) and my PC is upstairs where the cable modem outlet is. I will also want to connect my PC's printer to the wireless network so that my MBP can use it. So....are there any issues I should be aware of regarding connecting, speed issues, compatibility issues, bugs, etc?
Also, what hardware (router, ethernet hub, air-port, etc) do you recommend to make this work? (Mid-range price.)
Thanks very much.

not mid range price but usefullness and functionality for usb connected printers and hard drives and usage for Time Machine backup....Apple Extreme N router educational buy about $165.00

Similar Messages

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • Fix for wireless connection issues on MacBook Pro - reinstall OS!

    I hope this helps some of you out there.
    I was having all the usual problems with connectivity with the MacBook Pro I bought in January 09. It dropped the signal constantly and if I closed the top, it would make me search for my network again then it would give me the "connection timeout message" over and over again. I couldn't get anything done either at home or anywhere else. I finally took it in to the genius bar but they couldn't replicate the problem so I was sent home. The guy did, however, suggest reinstalling the OS (which I thought was a dumb idea since it had to be the airport card right?). Since it was a week away from the release of Snow Leopard I waited.
    Once I installed Snow Leopard all was fixed. It has now been almost 2 weeks and I haven't lost a signal once - the difference is amazing. I feel liberated!!
    Try a reinstall or upgrade to 10.6. and good luck. Post here to let us know if it works for you. Don't forget to backup your date first!

    Nope I'm not trying to tether.  I would like to be able to use a wifi connection on my mac and other devices.  I've gotten by so far just hooking up my mac to the ethernet port, but that requires me to be in my room.  I know its possible since there a bunch of networks nearby (locked of course), but I just can't figure out how to get mine working.
    I'm living in an apartment across the street from campus that is sort of school-owned...well its private but the internet service is provided by the campus since only students live here.  So we have to register anything that we want to use on the school's network.  On campus I can use wifi on my mac or iphone.  Its troubling how I can use the ethernet cable just fine, but when I connect it to my router (which I registered through the school as well)...nothing.  Technically this should be working easily - but maybe you're right on the network security accessability...or maybe my router is old...or my mac doesn't like my router?  I've had this problem before during my undergrad years except I was dealing with a cable provider and not the school.
    Maybe I should just make friends with my neighbors and find out how they set up theirs haha.

  • How to wirelessly connect MG3120 to macbook pro

    How to wirelessly connect canon MG3120 to macbook pro OSX?

    If the printer is Wi-Fi capable, you have to get it on your home Network.
    It needs to know the network_name and Wi-Fi password, and these need to be entered directly into the control panel on the Printer.
    Once it has joined your network, it will show up under Add-a-Printer.

  • Wireless Connection Dropping on MacBook Pro

    Hello,
    I have been running into an issue with my Macbook Pro dropping wireless connection to Alcatel Wireless access points. It happens when I disconnect AC power and run off of the battery. It usually drops the signal a few minutes after that. I have run all the updates and it still seems to be happening. We can tell when it drops because we are kicked off of a Filemaker remote database. Has anyone else run into this issue?
    Thanks!

    macsat wrote:
    I narrowed down the issue some time ago, but still it haven't been fixed (not even in the 2007.04 wireless update):
    http://discussions.apple.com/thread.jspa?messageID=4854252&#4854252
    Please beware that Pacifist-based "fixes" like that advocated in the thread in question above have two notable downsides:
    1) You will remove certain functional and security fixes from your system.
    2) You may break future software updates as your system will be listed as having some software installed that no longer is installed.
    I understand the frustration, but if you choose to "fix" your problem in this way, beware it is not without danger and may cause you future issues.

  • Wireless connectivity issues with Macbook Pro and At&t service HELP!!!!!

    I have three Computers two PC's and one Macbook Pro( the latest model).My desktop PC is used by ethernet, my girls laptop is used wirelessly and finally my MBP was being used wirelessly.
    I started off with only the two PCs and my internet connection never had a problem and I was doing everything from: on the internet to downloading.
    Before I bought my MBP I had also switched from internet and phone bundle to just internet from At&t service. So when I got my first MBP I notice that I was loosing wireless connection with both my girls pc laptop and my MBP so i thought it was because I had just switched service, though they send out a service technician and we came to a conclusion that it was the MBP. (I was loosing signal via wireless and ethernet). So we tried to see if both my girls laptop(wireless) and my PC desktop (ethernet) would run into the same issue which it did not.(MBP was turned off)
    So I decided to go my nearest Apple store and let them know what was going on. So I told them what was going on and they said It must be the airport card, and they ended up changing it. When I get home I discover that not only I am having the same issue but other issues too. I went back they ran some diagnostic and they said it was defective and they gave me a new one few days later.
    So in the mean time that I waited for my new one to arrive I used my PC desktop and my girl kept using her laptop and guess what no issue what so ever for one whole week. Now I receive my new MBP(they bumped the specs a little), went home set it up and still the same issue though I dont have the issue when Im using via ethernet. Just a view minutes ago I tried removing the ethernet and using the airport/wireless and within a few minutes I lost the signal.
    I have the gateway 2WIRE model(2701HG-B) modem/router.
    Is there something wrong? what do I have to do to make this work?

    Hi Guys, I bough my Mac almost two years ago. All this time I have experienced the same issue. There are tons of discussions re this issue in the internet. Unfortunately, Apple has done nothing to fix it. I have tried a lot of different options, but they work no longer then 1-2 days. The official fix - does not exist so far. It is quit strange, isn't? I can share my experience: if you go to AirPort Utility - Manual Setup - Wireless and then change Channel, it could help you till the moment you restart your computer; next time you need to repeat it again. It takes 2 minutes. Not sure that it would work for you but you could give it a try. Well, not the best option. Anyway Apple must fix it asap! Hello Apple, do you hear us? Good luck.

  • Wireless connection lost after macbook pro sleeps for more than 15 minutes

    It's annoying. I have a brand new macbookpro 3.06Ghz 17" hi-res screen running OS-X 10.6.3 and the wireless connection keeps dropping after the computer is either turned off or sleeping for more than 15 minutes.
    My router is a linksys wireless G, has dd-wrt software in it which is very powerful. When I release or renew the DHCP at the router, the mackbook connects to the wireless network, no problem.
    What configuration can be done at the macbook as to not have it time-out airport wireless connections unless I renew/release DHCP at the router? This is an annoyance beyond the limits of anyone's patience.... Thanks in advance for any help!

    Well, since nobody answered this post I decided to try a bunch of things and I believe I came to a solution:
    1 - Make airport the first connection under System Preferences->Network
    2 - In the advanced window:
    - Under AirPort: Keep only one network name on the list (the one you use all the time)
    - Select 'remember networks this computer has joined' and deselect all other boxes
    - Take note of the Airport ID (xx:xx:xx:xx:xx) and put it in your router's MAC address list. I do this because I only allow connections to my router from mac IDs that are on the list I create. In my case, I have my macbook pro and my PS3 system. If you don't know how to edit the MAC list in your router, do some research. It's pretty easy.
    - Under TCP/IP: Select "Using DHCP" on the IPv4 drop box
    - Select "Off" for IPV6 drop box
    - Under DNS, after you connect at least once, you should see (grayed out) your router's IP address on the left box and the domain on the right side box.
    Finally, under "Ethernet" you should see your Mac address there, the configure option should be set to Automatically and MTU as standard (1500).
    Press OK and then press "Apply" and lock that screen by clicking on the padlock at the bottom left. BTW on the top of this screen Location should be "Automatic" - if not, select it and apply.
    Done! Your wireless should connect quickly after the computer is turned on or waken up from sleep state. This assumes you configured your router correctly (mac addresses, frequencies, etc).
    Good Luck to all who try this - at least I have not have any more dropped wireless connections.
    Message was edited by: KEForex
    Message was edited by: KEForex

  • Wireless connectivity issue between MacBook Pro/ iTouch and Airport Express

    I'm creating a wireless network at home using my airport express and depending on the configuration settings I set in the airport utility, I will face the following issues:
    1- To connect my MacBook Pro to the wireless network created, I have to set the radio mode to 802.11n only (5 GHz). Any other radio mode (a/b/g compatible or n only (2.4 GHz)) will not work ("Couldn't find the network")
    2- Conversely, the use of the radio mode 802.11n only (5 GHz) with my iTouch doesn't work ("Couldn't find the network"). To connect my iTouch to the wireless network created, I have to set the radio mode to 802.11a/b/g compatible or to n only (2.4 GHz)
    As a result, I manage to 1) either connect to a wireless network created with my airport express with my MacBook Pro only 2) or with my iTouch only, depending on the configuration setup.
    I'm using the latest updates for the airport utility (7.4.2), iTouch (3.1.3) and Mac OSX (10.6.4).
    Any help on this?

    if you set it to the most compatible with the least common denominator you should be able to connect with both. (If that's what I understand you are trying to achieve).

  • Wireless connection between my MacBook Pro and my HP Photosmart Printer has failed.

    Hi - can anyone help?  Just moved house and signed up to BT Broadband.  New BT Wireless hub up and running very successfully BUT since setting up the new hub I have lost my wireless connection from my Mac to my printer and vice versa. Any ideas?
    Chasseur

    Hello chasseur,
    Welcome to the HP Support Forums!
    I would like to help you get the HP printer connected to the new network you have. Can you let me know what HP printer model you have?
    Thanks,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Wireless Connection Issues with Macbook Pro

    Maybe this is an OSX issue, but I'm not too sure.  I'm trying to set up a wireless access point through my school's internet, but I'm having some issues.  They provided information on how to set up the router, so I did just that.  However, when I connect and try to visit a webpage, I keep getting "Wi-Fi has the self-assigned IP address 169.254.....(don't remember the rest) and will not be able to connect to the Internet."
    I'm using the Linksys WRT54G v6.0 and I set up the network to the school's liking: disabled DHCP (so users are forced to talk to campus in order to connect) and enabled MAC filtering.  My computer and router MAC addresses are registered with the school so I can access the internet.  Ethernet works just fine on my computer, but I would like to be able to connect my iPhone and iPad to WIFI while I'm at my place.
    I feel like the problem has to do more with my computer than the router since I've had these issues on different routers with other Macbooks while my friend's PC's worked just fine to connect.
    I contacted the school's IT, but they won't help me when it comes to personal routers.  Oddly, there is a separate IT for residence that offers help, but they're closed for the day.
    Any suggestions?

    Nope I'm not trying to tether.  I would like to be able to use a wifi connection on my mac and other devices.  I've gotten by so far just hooking up my mac to the ethernet port, but that requires me to be in my room.  I know its possible since there a bunch of networks nearby (locked of course), but I just can't figure out how to get mine working.
    I'm living in an apartment across the street from campus that is sort of school-owned...well its private but the internet service is provided by the campus since only students live here.  So we have to register anything that we want to use on the school's network.  On campus I can use wifi on my mac or iphone.  Its troubling how I can use the ethernet cable just fine, but when I connect it to my router (which I registered through the school as well)...nothing.  Technically this should be working easily - but maybe you're right on the network security accessability...or maybe my router is old...or my mac doesn't like my router?  I've had this problem before during my undergrad years except I was dealing with a cable provider and not the school.
    Maybe I should just make friends with my neighbors and find out how they set up theirs haha.

  • Wireless connection error on MacBook Pro

    MacBookPro, retina display, OS10.8.5 -
    When opened, the CC desktop app reports there is no network connection when there is a good solid wireless network connection. Bizarzarely the Creative Cloud app updated itself over the same network, but CCD will not recognize that the computer has a strong network connection. This is only for downloading and updating apps. I can sync files with CCD. What to do?

    Yes, this has been happening for several days, so I tried another network and it still happened. More bizarre was that today, about 30 minutes after posting to the forum, a CC dialog popped up saying there were updates for CC installed apps. I proceeded and the updates went normally. So then I tried to install Lightroom5 as a test, and that worked fine too. Quite odd.

  • Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router and I can surf the web. I wonder if some security setting may be keeping it from connecting to my MacBook Pro.

    Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router.
    I can surf the web. My wife can print from her PC wirelessly on it.
    I wonder if some security setting may be keeping it from connecting to my MacBook Pro. I've installed the software, firmware and driver updates but
    it still shows "off line"
    with the printer power on. Any suggestions?

    All I can suggest right now is back up first the try to reset the printing system, (all printers in the list will be removed).
    Then connect directly to the printer via ethernet or to the Mac using USB and restart the efforts you have made up until now.
    As for router settings, it's possible but not likely that your router only allows a small number of clients. It's also posible that you have MAC address filtering on, lastly are you using the correct wireless protocol, (802.11a/b/g WEP or WPA etc)?

  • Connecting iMac and MacBook Pro using a non-Apple wireless router

    I use a Belkin wireless router. Is there any way for me to connect iMac and MacBook Pro using the router to share files? I think I read somewhere that I need AirPort Extreme for this, but I'm not sure. Thank you.

    Great resource from Dennis...file sharing, I.e. networking, is a function of the operating system settings and not the brand of router. Using Mac OS X 10.6 on both machines makes it really seamless. Following Dennis's kb article should make the two almost act like one machine.

  • I have a HP wireless printer, and im trying to connected to my macbook pro. But will not connect..

    I have a HP wireless printer, and im trying to connected to my macbook pro. But will not connect..

    Isaaura - what printer model do you use?
    While opening Safari click the Bookmarks icon and select Bonjour.. can you see the printer listed there?
    (If Bonjour is not listed click Safari > Preferences > Bookmarks and check Bonjour within the Collections section)
    Can you access the printer by typing its IP from Safari?
    If the printer not available only thoguh Bonjour but an be reached by its IP, what router brand and model are you using?
    Templeton Peck - correct me if I'm wrong, the different OS X forums have a dedicated forum for printing and scanning.. as Apple no longer produce printers about the last 2 decades I would assume those forums meant to deal with other manufactures over OS X..
    john galt - Am I spelling OS X correctly?

  • Connect my new Macbook Pro with Mountain Lion to my HP PhotoSmart B210

    How can I connect my new MacBook Pro with Mountain Lion to my hp b210 printer?  My printer is about 1.5 years old and works wirelessly just fine with my PC.  I just switched to mac.  The printer is supposed to be airprint compatible according to HP.  HP has no software drivers for me to download.  Instead they say to use Mac Software Update to get the software.  However, there are no updates when I try that.  I have tried adding the printer manually using it's IP address and can print a test page, but when I try to print using an application on the Mac it cannot find the printer or says the printer is in use.  Help!!!

    Are you sure it has no usb port?
    http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/18972-18972-238444-421635-410635-4 021933.html?dnr=1
    Connectivity, standard
    1 USB (2.0); 1 Wireless 802.11b/g/n
    The usb cable you need looks like:

Maybe you are looking for