Wireless connection on Satellite A60-743 does not work properly

i can't get any connection to the wireless internet with my notebook. how can i use it? this notebook should have wireless, but i tried to connect and there happens nothing! please help me!!!
best regards,
nasi

Hi
Dont be mad at me and sorry for my next hard words but such statements like this notebook should have wireless or i tried to connect and there happens nothing are bulls**t!
Do you know what Wlan is and how it works?!
Regarding your statement I dont think so!!!
First of all why you suggest this notebook should support the WLan card!? Who told you this!?
I have checked the hardware configuration of this notebook and the Satellite A60-743 was delivered WITHOUT the minPCI WLan card!!!
Why you dont check this in the first step!?
You should check the WLan card availability in the device manager. Under network adapters you should see the WLan card.
If the WLan card does not appear you have NO WLAN!!!

Similar Messages

  • Wireless connection on Satellite A200-1CR does not work correctly

    Hi,
    I've a problem with my wi-fi connection. Despite of I'm staying near my router I can't access to the Internet.
    If i have connection, it's level from 1 to 3 (5 is the best).
    I have the same problem with hot-spot. I cant access to the Internet or use only messenger, can't surf in the Internet, check my mails, etc.
    Another person haven't this problem in the same places. They can access to the Internet. What's wrong? Can you help me?
    I've a Satellite A200-1CR.
    Piotr
    PS. Sorry, I doubled thread

    Hi,
    I have Atheros WiFi card, but when i configured my router i write WEP key and when i configured my connection on notebook i use the same key.
    I have the same problem with hot-spot :(

  • My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but  it does not add any ebook either.  I uninstalled the program and reinstalled again but nothi

    my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but  it does not add any ebook either.
    I uninstalled the program and reinstalled again but nothing gone better-
    What should I do?
    Best regards

    Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
    Re: Everytime I close Itunes it loads back up

  • I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    Kowhai wrote:
    Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
    Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

  • Satellite A30 - CD-ROM does not work properly

    My CD ROM does not work properly because of corrupted drivers. I have tried uninstalling etc. How do you load new drivers or even reformat from the recovery disc when the CD ROM drive won't work?
    Seems like catch 22. Anyone help?

    If it is really a problem with the drivers for your CD-Rom, you can recover it.
    Because you need to boot your Notebook with the Recovery CD/DVD.
    This has nothing to do with missing drivers in the Windows Operating System.
    And if you can not boot with the Recovery Disc, I would say your Disc drive is broken.

  • I have just upgraded to Lion and I now find that my VPN network does not work properly.  It worked fine with Leopard.

    I have just upgraded to Lion and now my VPN connection does not work properly.  It was working fine when I was using Leopard.  The VPN is My Private Network and we use it to link to BBC iPlayer when abroad.  It will actually connect to the VPN site and shows a UK IP address, but then when we try to load an iPlayer programme we get the message from the BBC that we are not in the country and, therefore, cannot access the site.  Any suggestions?

    Have a look at System Preferences, Accessibility, VoiceOver.
    (Command - F5).
    charlie

  • What can I do to solve 3G service that does not work properly on iPad3?

    Hi, I have problem with my new iPad3. the thing is that 3G service does not work properly, while Edge service is ok. I realize that it is not because of my Sim, but the device itself. What can I do? any idea? thank in advance.

    I wish it was that. When I turn on 3G, the signal is full. Then, when I connect internet using 3G, its signal turn to 2G, Searching, No service, searching, and finally go back to 3G agian. This happen every minute although I tried to move to a hight 3G signal.

  • TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

    When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

    No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
    <Edited By Host>

  • Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

    Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

    I received no error message. The application was just trying to find applications unsuccessfully.
    I am using MAC OS 10.10.1
    I tried to uninstall the application  but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
    Otherwise I would have to reinstall everything and this would be a pain.
    Thanks for your help.

  • Flash player does not work properly on Windows 7 32 bits

    Hello,
    My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
    My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
    I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
    In fact, it works correctly on some sites, like youtube, but not on some others like :
    http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
    http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
    http://www.myspace.com/ => no audio player, right click gives flash context menu
    some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
    I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
    No problem too with flash player on http://www.adobe.com/software/flash/about/
    But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
    I cannot check boxes,
    My changes are not saved.
    In most of flash animations, videos, ...,
    when I click on parameters, I cannot do anything, even closing.
    when I am in full screen mode, the message "press escape to exit...." does not disappear.
    Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
    Thank you for your help

    Hi eidnolb
    Thanks for your answer.
    This is what I have :
    Verify user permissions
    I have an administrator account.
    I tried (uninstall, install and run) with super-administrator account for same results
    Install the most current version.
    I am running the latest version (10.0.45.2)
    Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
    I did not "clean" my computer.
    Troubleshoot Pop-up blockers
    I have no Pop-up or esle blocker  software.
    Ensure that Internet utilities do not block Flash Player
    I tried (uninstall, install and run) without Avast.
    I have windows 7 firewall. I do not know where I can allow ActiveX  controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
    Fix machine crashes when displaying Flash content
    I have no freez or crash.
    Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
    Using FF, I have SWF vs  10.0.45.2 and it is Enabled
    I really do not understand !!
    Thanks,
    Ju'

  • Image display control scrolling does not work properly when zoomed in

    I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
    Has anyone noticed this behaviour, and what would be a reliable solution to avoid this? 
    Dirk

    Hello,
    no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
    I have attached a VI for simplicity (although there is hardly any code in it).
    If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position. 
    I think it is a bug in the implementation of the image display control.
    Thanks,
    Dirk
    Attachments:
    scrolling.vi ‏818 KB

  • Subvi does not work properly when called inside a vi

    Hello Every body
    thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
    any tips would be highly appreciated.
    thanks
    Regards
    Attachments:
    vi.zip ‏87 KB

    I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

  • My Mac App Store on my MacBook Pro does not work properly.

    My Mac App Store on my MacBook Pro 15 inch does not work properly. When i go on to the app store, my wi-fi resets and then my app store quits. Why is this? How can i fix this problem? Please Help

    Back up all your files, on boot up when you first press the power button, press CMd and r and keep pressing until you get something apart from a apple logo. Then click reinstall Mac OS X or something like that. You may be prompted to insert your disk.
    Good luck

  • My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem.  I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

  • Application does not work properly when I press a CommanButton

    Hi all, I am having a problem with weblogic 10.3.5.
    It turns out that an application built with JDeveloper 11.1.5, I test it, and everything goes well in the JDeveloper integrated Weblogic.
    But when deploy in a standalone weblogic 10.3.5 server, the application does not work properly when I press a CommanButton to go to another page search (the property "action" is set correctly) , but nothing happens, stays in the same home page. Similarly when a commanButton link to run a task-flow, It do not work , however in the JDeveloper integrated Weblogic it runs correctly.
    How I can solve these problems?
    Thanks.

    Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
    " http://<our ip>:7001/myApp/faces/index.jspx "
    this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
    But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
    In the Afternoon we gonna give you more information about it .

Maybe you are looking for

  • Possible to check total incoming/outgoing size per domain?

    Hello :), Is it possible to see the top incoming or outgoing emails by total size? The intention is to determine which domain or emails may be eating the network bandwidth. Also, is there a Report to check the Incoming email graph/statistics a listen

  • I've added 1.8gb of epubs (per iTunes), but they take up 3.8GB of space??

    I've finally dumped about 1000 epub books on my iPad mini.  The Book tab under my device shows 1.83GB of space used, but the summary page for the device in both iTunes and on the iPad itself shows 3.8GB of space being taken up by 'books'.  No other p

  • Import/Export tools has not been installed

    Hello, I've isntalled client of Designer 6i rel.2 The whole installation has passed correctly up to the moment when the installer for 8i import/export tools has to be invoked (the setup write that install tool will be run to install 8i i/e tools and

  • Invoke wmi method to send remote command

    Hi guys, i am trying to create a log entry by using inoke-wmimethod not invoke-command this is what i am using but no luck foreach($server in $servers){ $error.Clear() $ping = New-Object System.Net.NetworkInformation.Ping if($ping.send($server,1000).

  • Weird Behaviour, Won't Let Me Start a Call in Any ...

    I use Skype to converse with my business associates every day. Today, for some reason, I can't make a call or receive one. Skype or phone call - doesn't matter. When I try to place a call, I just get the call animation and it's stuck there. I can't h