Wireless Connection Set Up Question?

I almost feel bad asking such a simple question on this forum but I have been a dial up person my entire life until I purchased the MacBook last weekend. So far so good with everything associated with the computer. Love It!!
Question: I am going to get the computer set-up for wireless connection but don't quite understand the router/modem/computer connection. Through the cable company that I will be getting the wireless feed from I can receive a Cox Cable Modem (buy or rent) and the associated installation programs.
Do I need the Modem that they provide along with a router that I will purchase (I have read that the NetGear WGR614 is very good) or is there no need for a modem?
Does the setup take the cable from the wall to the modem ( by coaxial cable) to the router (by coaxial cable) and then it's all set up for the computer?
Does the air port program that is installed already on the computer make the installation CD's meaningless?
Again, sorry for the dumbness of these questions but I just want to make sure to get everything right the first time.
MacBook Mac OS X (10.4)

That is a good idea. Does the AirPort Base station or a NetGear router accomplish the same thing?
So, I need to get the modem that will take the cable from the wall and then the signal will be sent to the AirPort Base Station and then to the Mac?
I am confused from the point of the modem that is either available through the cable provider or I can purchase. This is something that is required, correct. The wireless signal does not go from the wall outlet directly to the base station?

Similar Messages

I have wireless connection set up at work so when I get there it auto connects but today it says "Network Failure". I know it's not the network because the person that sits righ tnext to me is on it.

It's not even giving me the prompt to sign into the network as it normally does.

It may help to reset your network settings. This action will erase network information only, such as Wi-Fi networks and passwords, and will not affect anything else on the phone, such as contacts and pictures.
Settings > General > Reset Network Settings
The phone will reset and you will need to enter your network password again to gain access. Hope this works!

OJ 8600 Constantly loses wireless connection

My OfficeJet Pro8600 Plus works great, except when it loses wireless connection. I have an ATT wireless router/modem. Frequently, when the printer goes to sleep, it will not print. The wireless icon on the printer shows good, and says connected. But then I get the message on my computer that the printer is not connected. I cancel the print, restart the printer and then it will work. I also frequently get the message that scanning is also not connected.
Once I reboot the printer, it works fine. Any ideas?

brown7373,
If you have not done so for a while, I might suggest that you install (reinstall) the Full Feature Software for your printer. In August of this year (2014) there was an Update to the software that may well help with the situation you are facing.
Less clear, due to the usual less than full descriptive qualities of the documentation supplied with these things (in my opinion), is the need for the accompanying firmware Update that is shown for at least those users running the Windows 8.1 Operating System. Firmware updates, might be installed after software updates are tried -- and only at the user / owner's discretion.
General Instructions to Install the Printer Software
Reminder:
In most cases, the Solution Center has been replaced by the Printer Assistant.
The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
Windows Operating System:
Create Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
OR
Open HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g Drivers
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
After the initial installation is complete and working, check / install Category - Update
There is valuable information at the support website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, plus alerts and notifications for your printer. Be sure to take an extended look at what is available. Bookmark the page.
============================================================================
If you are running the computer wirelessly and using a notebook, you might consider the following:
Set the wireless adapter to "all on" as suggested in the following Dragon Document:
Settings to Improve Wireless Connectivity
See the Section on Page One titled
Wifi Power Management
============================================================================
What If: Bummer - Nothing works. Sad Story and all that.
If all else fails, you can call HP and politely ask for the printer code to switch off the sleep timeout on your printer model. This works when everything else fails. It is not a solution; this is a workaround and maybe not a pretty one -- there may be consequences down the road. Switching off the sleep timer will keep the printer awake and available.
Disclaimer:
There is no guarantee that HP will give you the code. This is not part of the service. You can ask the question.
Reference:
PhotoSmart 7520 Printer Loses Wireless Connection – Set System Mode Timeout to Zero
Contact HP – USA - Phone Assistance
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Can't set up wireless connection for HP C4385 All-In-One with Windows 7.

Hi guys,
I just got a new laptop with Windows 7 64 bit. I already had an HP C4385 All-In-One that I was using with my last computer. I have also just set up a new wireless network because I got a new cable provider. So basically I needed to do everything from the beginning.
When I inserted the setup CD and ran the setup program, it said I couldn't continue because my OS was not supported. I went to the HP website and found the solution, which was to plug the printer in via USB and let Windows Update find the latest driver. Ok, that's fine, the printer works now when the USB cord is plugged in.
To set up the wireless connection, the instruction manual says I need to do it through the network setup wizard p on the CD. But that brings me back to my original problem-- the setup CD won't work because it doesn't recognise Windows 7.
So my question is-- how can I update the network settings (SSID and key) on the printer without the network setup wizard?
Thanks for any help, this is really driving me crazy!

Download from hp.com here.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I need help in setting up a wireless connection

I need help in setting up a wireless connection.
I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
Any suggestions would help me.
Thanks,
DaisyMay

NETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
Model: WNDR3400-100NAS | SKU: 1208844
This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
4 Read reviews (21)
Sale: $79.99

How to set up WRT54GS so the wired and wireless connections both work?

I have a DSL line in to a Motorola modem.
The modem is connected to the WRT54GS with an ethernet cable.
When I connect my computers directly into the WRT54GS with an ethernet cable (there are four connection spots at the back of the box), I cannot go to the internet. I have 3 computers plugged in, but none of them connect via Ethernet..
Is there a setting on the router so that I can use the router for both wired and wireless connectivity?
Added info: I tried to connect directly from the computer to the modem, but again, got no connectivity. When I "chatted" with ATT, they told me the modem is set to "bridge", and that I could connect only one device. I don't want to change this setting because I want to use the router for the wireless capability. Besides which, I have more than one computer to connect to the internet.
How come I cannot just plug in and go?
My firmware version is v2.07.1.
I don't know how to find out what hardware version I have.
Other info is "DirectEthernet Connection, Speed: 100.0 Mbps, Signal Strength: Excellent, Status: Connected"
Also "1394 Connection 3, Speed: 400.0 Mbps, Status: Connected"
I don't know what that's for, but thought it might prove useful to those of you who are knowledgeable about such things.
Wireless is ok, but if I'm sitting right next to the router, I'd like to connect with Ethernet and take advantage of the better speed, etc.
Thanks in advance.

Just click this link.

2nd Computer Requires a Manual Wireless Network Connection Setting on Powerup

2nd Computer Requires a Manual Wireless Network Connection Setting on Powerup
On power-up, my 2nd computer, a 3 yo IBM R51, requires that I open the Network Connections window, then set the Wireless Network Connection Properties under the Wireless Network Tab, clicking on "Use Windows to configure my wireless network settings", before the automatic connection launches to the WRT150N v1.1 router signal.
I just bought the router and have the latest firmware.
My primary computer does not require the above settings change every time.
Is there a selection I can make so this is automatic on power-up or restart of my 2nd computer?

It was already set to automatic on both extended and standard tabs.
For a good measure, I set it to disable, applied, then reset it to automatic and applied again. Still does same thing.
I notice that if I double click on the small icon for the Intel ProWireless Network Card, I get a Wireless Connection Status Window.
This window has a Wireless Settings section where it seems to have a possibly obsolete "Current Location Profile" called ssnetwork (the name of my old network on my old D-Link router that I just changed out for the Linksys.
Anyway, the Network Name (SSID) field is now blank but when it first came up, it had the new name of the network I'm using.
Do you know how I access this "Current Location Profile" so I can edit it and possibly enter my new network name?
There is a button at the bottom of the screen called "Modify WLAN Settings" that I click but nothing launches when I do so.
Now that I manually did the connection setting, my network name appears in the "Current Location Profile."
Ted

New itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari HELP

new itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari after i type in the password PLEASE HELP ive turned on and off etc

My guess is that the security settings on your router and iPod do not match.
For a test, change your router so there is no security. See if you can connect and get to the Internet. If that works, set up the router with security and use the same settings for the iPod.

Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

Mac OS X 10.6 Help: Sharing your Internet connection

[SOLVED] Unable to set up wireless connection (wiki read)

Well, as you can see that's my 1st post. That's why I want, at first, congratulate the community for the amazing wiki and forums. It helped so much.
But I'm writing here because I have a problem that I'm unable to resolve with the wiki: The wireless connection. It doesn't work.
Now I will post my hardware and some software:
ASUS Eeepc 1000
01:00.0 Network controller: Ralink corp. RT2860 (as # lspci | grep -i net says)
03:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Faster Ethernet (rev b0) (as # lspci | grep -i net says)
Linux Kernel 3.2.4-1-ARCH (as # uname -r says)
I3 window manager
wireless_tools and wpa_supplicant installed
(If you want to know something more, ask me)
The wireless is enabled in the BIOS and the led indicator is on.
Being the network controller RT2860, must I do something special? I tried to blacklist what the wiki says with no results.
I have no problems with wired connection, but I can't set up my wireless connection with the # ip link set wlan0 up command (and yes, I execute this command as su or with sudo). I3 corroborates it in the status bar: W: down.
# ip link list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
( I had it disconnected when I did this check)2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 00:22:15:08:af:e2 brd ff:ff:ff:ff:ff:ff
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 00:15:af:ba:39:b8 brd ff:ff:ff:ff:ff:ff
I tried a lot of thing, but no results at all. Must I configure manually some file like wpa_supplicant.conf, rc.conf or others? It is normal that in rc.conf, NETWORKING tab, the only interface is eth0 (interface=eth0) with no other references to wlan0?
Thanks for your attention.
Last edited by Agravain (2012-02-20 17:42:52)

That thing on the wiki about blacklisting is probably outdated, it's from the times the kernel had two Ralink drivers. Now there's only one, and you should not blacklist anything.
rc.conf is only for wired interfaces. For wireless you can do stuff manually, or use a manager - netcfg, wicd, networkmanager.
And that's that. For further help, you'll have to provide details about which commands you used and what their output is.
Last edited by Gusar (2012-02-20 16:15:04)

New Apple TV and wireless Connection Question?

My son lives in Russia and works for the State Dept. He want an Apple TV. The problem is that he is not tech savvy. Does the Apple TV need to connect wired or wireless to the router or just to the laptop to stream. He has a wireless connection for the laptop but if he has to go through set up and connect it to a router, I will never be able to walk him through it from 10,000 miles away. I have the old Apple tv and have it connected to the router with a wired connection. But I guess my IMAC synchs with the old Apple TV to send programs whether it is hardwired to a router or not. I hope this makes sense.

New AppleTv will connect via ethernet or wi-fi as before.
You could more than likely just connect it directly to the laptop with ethernet to stream locally stored content,but you'd need to set up some kind of internet sharing for it to access any internet or itunes store features.
AppleTV could also be set to work with an ad hoc wireless network from laptop but again internet connection would have to be shared over this, and it might be a bit fiddly too if router setup is going to be fiddly.
Simplest would be to connect both to router with ethernet. Have you considered mains powerline ethernet adapters if running cables is impractical?

I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
To perform the Factory Default Reset on the Time Capsule....
Pull the power cord from the back of the device
Wait a few moments
Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
On your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Continue
Follow the guided setup and choose the "join" option when it appears duriing the setup
You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

Unable to set wireless connection with imac and Canon MX860 printer ...

I recently converted to a Mac and bought a Mac Book, iMac, Airport Extreme, and a Canon MX860 printer. i have installed the canon software numerous times on my iMac to set up the wireless connection. yes, the airport extreme recognizes the printer and i am able to connect to my private and guest networks. the signal strength is good. It's the next part that I'm always stuck at. The Printer settings does not display when i choose More Printers and select Canon IJ Network. I called Apple support and we tried changing my network settings to an unsecured network and it still has the same issue. It was recommended this may be Canon driver issue and advised me to contact Canon. I reset the Airport, changed my network name and password .. i think i tried everything and it still does not work. What was I thinking when i said i wanted to convert to Mac? I can't move forward and connect my macbook or pc yet until I successfully connect the imac. Yes, i installed the latest canon IJ Network tool. of course the USB connection is fine but that defeats the whole purpose if why i bought this printer. please advise how to fix. this is getting very frustrating.

Some help at http://store.apple.com/us/product/TV352LL/A perhaps in the comments.
And maybe at http://www.amazon.com/Canon-PIXMA-MX860-Wireless-Printer/product-reviews/B001R4C 5BK in the comments.
"I ran into the same network installation issue that I've seen in other Canon printers. Canon's network setup forces you to connect by USB cable first. Only after you tell the program that you want to use the computer over the network can you remove the USB cable, move the printer if needed, and if you're using a wired connection, reconnect a network cable. The process isn't particularly difficult, but it's more cumbersome than what other printers let you do, which is simply put the printer where you want it, plug in an Ethernet cable, and install the software." source = http://shop.pcmag.com/shop/product/pcmag/84634068.aspx?SB=6&OB=1
"MAC wireless network printer setup requires turning off firewall, and works fine if you leave firewall off (not recommended). If you set firewall at "essential connections only," wireless networked MX860 won't work. You must add MP navigator and solution apps to your firewall enabled list. Then it worked fine on the admin account, but still won't work on users account which required additional permission settings and selections. After 2 hours it worked fine, but I would've expected better instruction manual for MAC." source = http://cnet.nytimes.com/multifunction-devices/canon-pixma-mx860/4852-3181_7-3352 9769.html
"The only trouble that I have had with this machine is setting up the wireless network. The manual instructions are impossible for me to understand and I ended up having to call for assistance. Which easily solved the problem. And again when I had to reconfigure my network settings it was impossible to follow the logarithm of instructions in the manual. Again I needed to call for assistance. If I need help after the year manufacture's warranty I will be charged for these calls." source = http://www.zimbio.com/InkjetPrinter+Reviews/articles/1932/Canon+PIXMA+MX860+Wireless+One+PhotoPrinter
Even Windows people have trouble:
"I NEED INTRUCTIONS ON HOW TO CONNECT MY HP LAPTOP TO THE CANON MX860 PRINTER."
"I'm with you. I have my mx860 connected usb to my pc with the printer being shared but my wireless laptop can't find it no matter what I try."
And, unhappy Vista person:
"I had high hopes for this printer - it seemed to have it all. But the wireless feature never worked, it only worked on my gigabit network for about two weeks (only THREE print jobs including the test print), and never observed it to work via USB - Vista (x64 Ultimate) would throw an error saying it could not attach the device."

No wireless connection option when i set up my apple tv even though wireless is working at home. No option under settings to set up wireless connection. Does it mean wireless is broken?

No wireless connection option when i set up my apple tv even though wireless is working at home. No option under settings to set up wireless connection. Does it mean wireless is broken?

What do you see under settings?
Do you have a network setup?
1. Network Configuration
Have your network password (if you use one) and your Apple Remote handy to configure your Apple TV. Make sure there are no obstructions between the remote and Apple TV. Read more about using and troubleshooting the Apple Remote.
If you:
Use a wired Ethernet network to connect, Apple TV automatically detects your network.
Use a wireless network to connect, Apple TV helps you select and configure your network connection.
Connecting to Your Wireless Network
Apple TV will help you connect to your wireless network. If you use a password to access your network, have it ready. Use the Apple Remote to:
Select your network from the list, or enter your network name if the network is hidden.
Enter your password (if you have one).

Set up wireless connection on OS X Yosemite 10.10.2

How do I set up my wireless connection on OS X Yosemite 10.10.2?

Follow the installation/setup instructions with your modem/router. Since there is no Mac compatible software with most of those, you can simply check their instructions and enter things manually on the router's webpage - usually something like 192.168.x.x. You need to set up the modem and/or router first before you can try to connect your devices (which should then be pretty automatic or you can check in Network Preferences).
Or are you talking about something else?

Wireless Connection Set Up Question?

Similar Messages

Maybe you are looking for