Wireless connection to IPad 1

I am unable to connect to the internet.  Was working fine but now keeps cutting out even though internet signal is strong.  I have tried rebooting, turning wifi off and on, forgeting network and resetting it.  All work for about 2 minutes and then it stops working again.  Anyone got any siggestions?

Karen-
Try unplugging your WiFi router for a few seconds and see if that helps.
Fred

Similar Messages

  • How do I wirelessly connect my iPad 4 to a Sony Bravia TV?

    My Sony Bravia KDL-32W653A recognises that my iPad4 is on my LAN. But I just can't get the iPad content ( videos ) to show up on the TV screen.
    The iPad Settings shows the " direct -GC-Bravia" other connection, but it wants to revert to my (John Lewis wireless connection.
    If I tap on the other, Bravia panel I am asked for a password. I don't have a password for it and never have had. If I try to use my Apple password or that of my Sony support log-in or even my LAN home group , the iPad just messages:-  "Unable to connect to Diect-GC-Bravia"
    I seem to go round in circles and get nowhere- Can anyone out there who has an iPad 4 (retina display AND a Sony Bravia TV help me please?
    Maybe even a Sony employee? who owns a similar iPad?
    Davidthebass.

    You dont.  Apple won't allow widely used standards and Sony is so behind the times in this area it's painful and almost as bad.  Apple forces you to buy an Apple TV whereas Sony forces you to own an android phone to do this natively.  Surprise!
    disappointed I started my smartphone tenure with Apple; had no idea how badly it was going to burn me in about 100 different ways over the years.  All they have on android these days is more efficient hardware...: and since they don't take advantage of it... It's a moot point at the price premium.
    as for Sony.  I just spent more than I did on my last car for their flagship and id be satisfied if it costed about 75% less and wasn't a "smart" TV.  Since it is - and this is 2015; the cost coupled with the inability to properly stream or mirror from.... Meh.  Not gonna waste another word.  If neither get it by now, they never will.  Talk with your wallet guys, it's the only language they understand.  Unfortunately they are wise enough to know the sheep outnumber dramatically so it's in vain anyhow. 

  • Wireless connection to iPad air

    Unable to connect to my new iPad air to my HP J 4680 office jet all in one

    Hi,
    How do you connect your printer now ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Wirelessly connect ipad to projector

    I am a teacher and am looking to buy and ipad for my classroom.  Another teacher in my building uses an app on her ipad to record notes and upload them to a website for students.  Right now, she can connect her ipad to a projector with a cord but has to stay stationary.  I would like to know if there is a way to wirelessly connect the ipad to the projector.  Maybe by using an Apple TV?  This would allow me to walk around the classroom.  Any suggestions would be helpful.  Thank you.

    Connecting to a projector does require a cable.
    Your Apple TV idea could work, if the TV was at the front of the room, both are connected to Wi-Fi and you can use mirroring for the display.

  • I get wireless connection but my internet does not work on my ipad 2

    I get wireless connection but my internet does not work on my ipad 2

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Printing with HP Deskjet 1510 from wireless connected ipad using computer connected to broadband

    Hi,
    I am trying to figure out easy way to print any content from my ipad connected with wifi through xp computer to HP Desjket 1510,

    Hi Ieb_Fabulous,
    Welcome to the HP Support Forums. I gather you are trying to hook your Deskjet 1510 printer to your laptop with a wireless connection.
    This printer does not support wireless connectivity. I have included the Deskjet 1510 Printer Specifications for your reference.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to connect my iPad to wireless dest 3511e all in one HP printer

    How to connect my wireless printer to my iPad HP dest jet 3511e all in one SN [Personal Information Removed]

    Hi Alicerief,
    Welcome to the HP Support Forums. I understand that you would like to know how to print from your iPad to your Deskjet 3511 printer.
    Your printer is AirPrint and ePrint capable so you should be able to use either method to print once your printer is connected to your wireless network. The instructions on connecting your printer to your wireless network can be found in your user guide. You can designate it as a wireless printer during the setup as detailed in the section "Traditional wireless connection" on page 32.  If you have already installed your printer onto your computer using a USB connection, the instructions to switch to a wireless connection can also be found on page 32 in the section titled "Change from a USB connection to a wireless network". 
    I have included several reference documents for you. The first one reviews printing from an Apple mobile device to your printer. I have also included the document on how to setup ePrint and customize the printer's ePrint email address. There are two mobile apps available from HP that will allow you to send print jobs to your printer, the HP ePrint mobile app and the HP All-in-One Printer Remote app. The AiO app will also allow you to scan from your printer to your iPad. I have included the FAQ documents for both apps.
    HP Deskjet 3510 e-All-in-One Series User Guide
    http://h10032.www1.hp.com/ctg/Manual/c03471705.pdf
    Printing from an Apple Mobile Device
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02796271
    Setting Up a Custom Email Address for ePrint
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02940150
    HP ePrint Mobile App FAQs
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01923321
    HP All-in-One Printer Remote Mobile App FAQs
    https://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03561640
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to connect my iPad to a jbl wireless speaker?

    How to connect my iPad to a jbl speaker?

    If this is a wireless Bluetooth speaker then put it into "discover" mode following speaker directions.
    Go to Setting > Bluetooth on your iPad. Turn Bluetooth ON (if Off), locate your speaker and tap it to connect.

  • I am trying to connect my ipad to my new hp photosmart printer 6520e The ipad is saying no air printers found . The printer is already connected to my mac book and my desktop wirelessly. What do I need to do ? Please help

    I  can't connect my ipad to the wireless printer hp photosmart 6520e . Ipad is stating no air printers found. My MacBook and desktop are connected and working well.

    S the printer connected to the same Wifi network as the iPad?  If so, is it wirelessly connected to it?
    That particular pinter model does appear on Apple's list of compatible printers.
    About AirPrint
    You might want to try to reboot the router and try again as a first step.

  • How do you connect your iPad to a wireless computer?

    How do you connect your iPad to a wireless computer?

    Your question makes no sense. You "connect" an iOS device to iTunes on your computer via WiFi or by using the supplied cable.

  • Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

    Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

    Hi Tomiwa,
    You cannot print from the iPad to that printer. AirPrint and Bluetooth are completely different.
    There may be apps you can buy that will enable using that printer, but that is not an ideal solution.
    That particular printer has had many bad reviews, and is unreasonably expensive for its features. Considering that you just bought the printer, as well as its lack of AirPrint, I suggest you return it and buy a printer that supports AirPrint.

  • My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this

    My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?

    a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
    The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.

  • My ipad 1 for no apparent reason no longnet. Our home wireless connection is working for all other devices. Any clues?

    My Ipad 1, for no apparent reason, no longer connects to the Internet. Our home wireless connection is working for all other devices.Any clues?

    You can also try to reset your network settings on the iPad.  Go to Setings>General>Reset>Reset Network Settings.
    Good Luck!

  • Ipad wireless connection to Color Laserjet pro MFP M177

    Struggling on set up. The printer seems to require a network through which to wirelessly connect to my IPAD. But my IPAD runs on 3G and is not part of any network in my office. I already have the IPAD connecting to a HP printer at home where there is a network, but not at my office location. so ive already got the HP eprint App up and running, but it cant identify the printer, which is switched on (but which is asking for me to select a network). So can anyone direct me as to how I wirelessly (no other way with an IPAD) connect my IPAD to my brand new Laserjetc Pro MFP printer ? Mny tks
    This question was solved.
    View Solution.

    Hi,
    You should either plug the printer to your network via an Ethernet cable or wirelessly by running the installation on a PC, then connect the iPad to the same wireless network as the printer.
    If you do not have a wireless network at the office you may also use the Wireless Direct feature of the printer by following these steps:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​dlc=en&docname=c03920612&lc=en&product=5445914&tmp​...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How can I connect my iPad to my wireless Hp  Officejet Pro 8500 A909g ?

    How can I connect my iPad to my wireless Hp Officejet 8500 A909g ?

    Are you trying to connect the iPad directly to the HP or using your wifi network?
    HP published this page that may help:
    http://www8.hp.com/us/en/ads/mobility/overview.html?jumpid=va_r11400_eprint
    A909 does not show as an AirPrint capable printer:
    http://support.hp.com/us-en/document/c02623193
    About AirPrint - Apple Support
    You may wish to search the AppStore for an app that could help you.

Maybe you are looking for

  • How do you edit pages in safari?

    Does anyone know how to edit web pages in Safari? I used to use netscape and it was simple: you simply chose the "edit page" option. But I can't find anything like that in Safari.

  • Compilation problem with GCC 3.3.2 in solaris 10

    Hi, Iam using solaris 10 SUNW,UltraAX-i2. Iam trying to compile tripwire binaries tw_ASR_1.3.1_SRC. Iam using gcc 3.3.2, later I installed the libiconv package. on reading the documentation from sunfreeware i modified the file mkheaders.conf putting

  • R12 - Input and Output Tax Classification Codes in Invoices Workbench

    Hello, After upgrade from 11i to R12, in invoices workbench, the Tax Classification Code LoV (invoice line field) contains taxes that formerly were both input and output. In the E-Business Tax Implementation guide says that : Release 11i tax codes an

  • For 1 process order all the materials to be clubed.

    If aufnr is order no then for one order no i would like to club all the three materials. In bdc how the code can be written???

  • Exporting graphical report using FM GFW_PRES_SHOW

    Hi All,      I'm creating a graphical report using the FM 'GFW_PRES_SHOW', I want to download this graphical report, but there is parameter(CONTENT) used in this FM to export the output, can any one help how to populate the values to this parameter s