Wireless Connection with Sony PSP

I cannot my Sony PSP to the WRT54G using the wireless connection. What are the setting I need?

I have a wrt54g v5 with Firmware Version: v1.02.0 and the PSP has firmware version 3.11.
I shut off all security use DHCP (I also used manual settings) If I scan for a network I can see it and it show 100% signal strength.
But if I try to connect it tells me it can not locate an access point. I scanned the site, I reduced my becon times my rts and fragmentation times, still no progress.
I also have a WII and it also can not connect to the open wireless network. Yet when I scan for it, the Wii can see it as well.
I know it's my network and not somebody elses these divices are seeing as I have a very unique name for my network.
My Router picks up my work Laptop, my personal Laptop and a friends laptop with no issues. I dont think my router is bad but I read the forums and half the people can connect with their WII's and PSP's no problem and the other half, like me flounder. I setup wireless networks for a living and these games have me beat.
I used to use a network Everywhere wirelss router and that never gave me issue , using wep or open modes.. My Linksys.. Kills me.. Has anyone had a problem them fixed it? WRT54G Ver 5 Firmware Version: v1.02.0 please God help me, my 12 year old has me tourtured!

Similar Messages

Connection of Sony PSP to iMac wirelessly

Is it possible to connect a Sony PSP and my iMac provided that PSP can only be connected to any computer through Wi-Fi?
Is the built-in Airport good enough for that? I don't use it, because my internet is working through Ethernet (I've got a cable modem), so I have no clue of its capabilities.
Thanks for your ideas.
Mike

I don't have a PSP so I don't know for sure, but you can use your iMac's airport as a wifi hotspot. go to the wifi menu icon in the top right corner, when you turned airport on there will be an option "Create Network...", use that to create a wifi network then try connect to that using your PSP.

New itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari HELP

new itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari after i type in the password PLEASE HELP ive turned on and off etc

My guess is that the security settings on your router and iPod do not match.
For a test, change your router so there is no security. See if you can connect and get to the Internet. If that works, set up the router with security and use the same settings for the iPod.

Lost wireless connection with mx860

i lost my wireless connection with my mx860 - please help, i have tried it all
thank you

Did you solve your printer connection problem? I have the same issue. When I first turn the system on, it is connected. But after a short time (a few minutes?) it loses connection between Mac and printer, even tho both are connected to my WIFI. I have to turn the printer and and off to reconnect it to the Mac. Very frustrating. I have checked Netgear, Printer and Mac settings and can't find any explanation.

HT1515 I've lost my wireless connection with light flashing amber, I've unplugged router and modem and pressed reset button on airport extreme

Any suggestions on retreiving wireless connection with airport extreme, have unlugged power to all sources and pressed reset button on router, still amber flashing light

Hello ebulloc,
It sounds like you are getting the flashing amber colored light and cannot connect to the internet with it. According to this article:
AirPort base stations: About AirPort base station status lights (LED)
http://support.apple.com/kb/ht4600
Flashing amber
Startup is complete, but the Wi-Fi base station has detected a condition that requires your assistance. To resolve flashing amber status light conditions click here to learn more. Launch AirPort Utility to find out what conditions are being reported.
This article should lead you to a resolution:
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/TS1589
Thank you for using Apple Support Communities.
Take care,
Sterling

Zyxel pk500z router/wireless modem loses wireless connectivity with imac

My iMac loses wireless connectivity with wirelss internet from my Qwest ZyXel PK5000Z modem/router intermittently. Have to constantly reboot the router to allow my Imac and other Mac notebooks nto reconnect to wireless internet connection.

Suggest that you take one or more of Mac laptops down to the coffee place and connect there to check your performance. If you get a good connection there....as I suspect you will...you know the Macs are functioning correctly.
If the Macs perform well at the coffee place, you need to contact the ZyXel support folks for ideas on why the PK5000Z device is requiring constant restarts.
As you might imagine....on an Apple support forum, we are not going to be able to provide much help with a ZyXel product.

Lost wireless connection with Lexmark Printer

MBPro with 10.8.1. Lost my wireless connection with X6675 Lexmark printer. How do I reestablish the connection. My router is a Time Machine.

Did you solve your printer connection problem? I have the same issue. When I first turn the system on, it is connected. But after a short time (a few minutes?) it loses connection between Mac and printer, even tho both are connected to my WIFI. I have to turn the printer and and off to reconnect it to the Mac. Very frustrating. I have checked Netgear, Printer and Mac settings and can't find any explanation.

E4200 connect with Sony KDL-46EX701 at 2.4 Only

My E4200 does not connect with my Sony KDL-46EX701 at 5 GHz. The set sees the 5 GHz at medium strength or highter, but won't connect. Password is correct and verified. The Sony's UWA -BR100 adapter should work at 5 GHz, and it did work with my E3200 at 5GHz (unfortunately, it also caused the tv to recycle off and on whether connected at 2.4 or 5GHz).
2.4 works fine with the E4200 and the Sony.
Problem occurs with 1.0.0.1 firmware and 1.0.0.2 firmware.

As my first post mentioned, I've been there and done that to no avail.
I also tried a Netgear WNDR4000, with the same result.
I've noticed that the 5 GHz reception on the Sony looks weak/unstable. I think the problem is that Sony's UWA-BR100 stick has poor reception, particulary at 5 GHz. Worked ok in winter and spring, but even indoors w/AC and good ventilation, my usable wireless range has always dropped significantly in summer when it's hot and humid.
Anyway, I gave up. I took and Linksys E3000 that I was going to return, installed TomatoUSB on it, set it up to be a wireless ethernet bridge, disabled the 2.4 GHz radio, and then wired it to the Sony. Then I manually configured the IP settings on my Sony TV. With the E3000 as a wireless bridge, the E4200 and the Sony connect perfectly at 5 GHz. Expensive fix, unfortunatly.

How to connect with sony bravia.

Hi,
I'm trying to connect my Mac pro with my Sony Bravia LCD TV. I bought a MiniDP to VGA cable and I already had a VGA extension to connect with my TV. I used to use that cable to connect my other laptop and worked ok with frequent "no synchronisation". Once I connected all, nothing happened. I restarted the PC but nothing happened. I tried to play around with all connection, but nothing happened. I do use windows XP in my mac pro as well and it didnt work their either although my other PC working fine with same VGA cable. I'm not very sure my MiniDP to VGA cable is working or not? Is there anyway I can check its working. Also, someone (sorry forgot the name) in the forum said, HDMI works better then VGA. What do I have to do to connect my PC through HDMI. Is there any direct cable to connect MiniDP and HDMI? Thanks for your help.

The best way to test if the VGA adapter is bad or not is to try it with another display, preferably a computer monitor instead of a TV. If it doesn't work with a monitor, then that's stronger evidence the adapter is bad.
There are MiniDP to HDMI adapters. Here's an example of one. I believe this company will ship internationally. You might be able to find UK sources for similar adapters.
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=5311&seq=1&format=2

How can I resolve the issues connecting to my wireless connection with my Apple tv?

Ive had my Apple tv for about a month now & I still have not even used it for what I actually got it for. It allows me to use the airplay feature with my ipad2. But when I try to use the home sharing feature it never connects with my apple ID. At first I thought that maybe I'm just typing it the wrong way, but then I used the same ID and password to purchase an app on my iphone & it works. It's not my wireless connection because multiple devices connect to it just fine, without any issues. I tried reseting it, that obviously didnt work. I really just dont know what else to do.

you can't rely on airplay mirror some apps support the old in app airtune audio only option if the video app in question does you can do it from the apps settings somehow
if not then you need a airport express which does pretty much what airplay mirror on the Apple TV does but it's a audio only

Problem with connetction to wrt54g2 via wireless connection with WPA/WPA2 & wireless MAC filter

Hello,
I'm Alexey from Novosibirsk, Russia.
I have a problem with connection to wrt54g2 from my DELL D630 notebook via wireless connection. When I setup WPA/WPA2 in wireless security and wireless MAC filter I can't connect from notebook to WRT - in Windows I see that dynamic IP address from WRT is not assigned. When I switch off security mode to disable always OK, but I need a wireless security between DELL and WRT.
Connection via cable Ethernet port is OK.
Can You help me?

Have you tried the different laptop...?
Download 1.71 MB the firmware for WRT54G2 v1 and reflash the router's firmware.After reflashing/upgrading the router's firmware,reset the router for 30 seconds and reconfigure the router from scratch.

[SOLVED] No wireless connection with linux-3.2.2-1

After upgrading to linux-3.2.2-1, my wireless connection stopped working. It "connects", but I can't get an IP address through dhcp. Assigning an IP manually doesn't do the trick, I can't even reach the router through ping.
Downgrading to 3.2.1-2 fixes the issue.
I suspect this may be a regression but I couldn't find any information or reports of other people having the same problem anywhere.
I should note that I can establish a working connection when running the new kernel by using an external USB wireless device, so this probably has to do with the modules/drivers of my network card (?).
This is the ouput of some commands when running the new kernel (wlan1 is the device mentioned avobe):
$ ifconfig -a
eth0: flags=4098<BROADCAST,MULTICAST> mtu 1500 metric 1
ether 40:61:86:18:60:2d txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 43 base 0x2000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436 metric 1
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)
RX packets 22 bytes 1420 (1.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 22 bytes 1420 (1.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
ether 1c:4b:d6:5c:47:dd txqueuelen 1000 (Ethernet)
RX packets 59 bytes 18759 (18.3 KiB)
RX errors 0 dropped 4 overruns 0 frame 0
TX packets 3 bytes 1161 (1.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
ether d8:5d:4c:8f:49:43 txqueuelen 1000 (Ethernet)
RX packets 449 bytes 144928 (141.5 KiB)
RX errors 0 dropped 8 overruns 0 frame 0
TX packets 9 bytes 1551 (1.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
05:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
$ lsmod
Module Size Used by
uvcvideo 64311 0
videodev 82101 1 uvcvideo
ath9k_htc 56902 0
v4l2_compat_ioctl32 8316 1 videodev
media 10597 2 videodev,uvcvideo
arc4 1410 4
ath9k 87343 0
ath9k_common 2096 2 ath9k,ath9k_htc
ath9k_hw 347282 3 ath9k_common,ath9k,ath9k_htc
ath 14802 4 ath9k_hw,ath9k_common,ath9k,ath9k_htc
mac80211 228367 2 ath9k,ath9k_htc
joydev 9895 0
cfg80211 172260 4 mac80211,ath,ath9k,ath9k_htc
rfkill 15498 1 cfg80211
i2c_i801 8187 0
snd_hda_codec_hdmi 24121 1
snd_hda_codec_realtek 194997 1
snd_hda_intel 23343 0
snd_hda_codec 89160 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
snd_hwdep 6389 1 snd_hda_codec
snd_pcm 74780 3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc 7153 2 snd_pcm,snd_hda_intel
snd_timer 19544 1 snd_pcm
r8169 49040 0
iTCO_wdt 11885 0
snd 59214 7 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
mii 4059 1 r8169
fan 2426 0
processor 25582 0
battery 6453 0
thermal 7799 0
ac 2344 0
evdev 9530 4
mei 32414 0
intel_ips 11213 0
wmi 8475 0
iTCO_vendor_support 1961 1 iTCO_wdt
psmouse 61311 0
pcspkr 1819 0
serio_raw 4429 0
soundcore 6210 1 snd
vboxnetflt 17159 0
vboxdrv 1790690 1 vboxnetflt
ext4 417116 1
crc16 1359 1 ext4
jbd2 71243 1 ext4
mbcache 5881 1 ext4
usb_storage 44519 2
sr_mod 14951 0
cdrom 36681 1 sr_mod
sd_mod 28307 3
ahci 20037 0
libahci 19559 1 ahci
libata 166654 2 libahci,ahci
scsi_mod 133443 4 libata,sd_mod,sr_mod,usb_storage
ehci_hcd 40698 0
usbcore 146241 5 ehci_hcd,usb_storage,ath9k_htc,uvcvideo
usb_common 954 1 usbcore
i915 418631 7
video 11164 1 i915
button 4470 1 i915
i2c_algo_bit 5263 1 i915
drm_kms_helper 26137 1 i915
drm 188362 3 drm_kms_helper,i915
i2c_core 20492 6 drm,drm_kms_helper,i2c_algo_bit,i915,i2c_i801,videodev
intel_agp 10904 1 i915
intel_gtt 14519 3 intel_agp,i915
Thanks in advance.
Last edited by Ideka (2012-02-02 21:23:38)

Ideka wrote:I suspect this may be a regression but I couldn't find any information or reports of other people having the same problem anywhere.
You must not have searched very long then, because you've missed not one, but two threads:
https://bbs.archlinux.org/viewtopic.php?id=134374
https://bbs.archlinux.org/viewtopic.php?id=134580

Unable to access wireless connection with linksys rooter WRT54GS

Hi,
I just installed a wireless rooter Linksys WRT54GS on my connection, The problem I have is being able to access it with my wireless on my laptop.
I kept getting a message stating "connection unindentified" "access limited". I've done most of what is already suggested on your forum such has turning the power off of my rooter, my modem and such and still nothing. I'm able to access the wireless with my girlfriend Mac Notebook, my playstation 3 and my desktop computer which uses Windows X. First I thought that it my be a problem with my security but even when the connection is unprotected I still get that error. I try to disable the IpV6but that didn'tdo anything either.
My laptop is a Toshiba Qosmio X300 PQX32C-033019 with Vista and my rooter is a Linksys WRT54GS vers. 6
Here's my connection log, sorry if it's in French:
Informations sur l'ordinateur
Vendor:TOSHIBA
Machine Name:Qosmio X300
VersionQX32C-033019
CPU Maker:GenuineIntel
CPU Name:Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz
CPU Clock:2267
CPU Base Clock:2267
OS:Microsoft® Windows Vista™ Édition Familiale Premium
OS Build:6001
OS SPervice Pack 1
Ram:4188120
Début de la page
Informations IP
ipconfig /all
Configuration IP de Windows
Nom de l'h“te . . . . . . . . . . : PC-de-ThomasMur
Suffixe DNS principal . . . . . . :
Type de noeud. . . . . . . . . . : Mixte
Routage IP activ‚ . . . . . . . . : Non
Proxy WINS activ‚ . . . . . . . . : Non
Liste de recherche du suffixe DNS.: phub.net.cable.rogers.com
Carte r‚seau sans fil Connexion r‚seau sans filÿ:
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Intel(R) Wireless WiFi Link 5100
Adresse physique . . . . . . . . . . . : 00-21-5D-3D-9C-08
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::a9d9:4618:2ae4:d7e5%11(pr‚f‚r‚)
Adresse d'autoconfiguration IPv4 . . . : 169.254.215.229(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.0.0
Passerelle par d‚faut. . . .ÿ. . . . . :
Serveurs DNS. . . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Ethernet Connexion au r‚seau local :
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Adresse physique . . . . . . . . . . . : 00-1E-EC-3F-7B-CF
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::4da:b21b:843c:7bfd%10(pr‚f‚r‚)
Adresse IPv4. . . . . . . . . . . : 192.168.1.100(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.255.0
Bail obtenu. . . . . . . . .ÿ. . . . . : 8 juin 2009 18:11:58
Bail expirant. . . . . . . . .ÿ. . . . : 9 juin 2009 18:11:58
Passerelle par d‚faut. . . .ÿ. . . . . : 192.168.1.1
Serveur DHCP . . . . . . . . . . . . . : 192.168.1.1
Serveurs DNS. . . . . . . . . . . . . : 64.71.255.198
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Tunnel Connexion au r‚seau local* :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : isatap.phub.net.cable.rogers.com
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Carte Tunnel Connexion au r‚seau local* 6 :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Carte Microsoft ISATAP #2
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Début de la page Informations de routage
route print
===========================================================================
Liste d'Interfaces
11 ...00 21 5d 3d 9c 08 ...... Intel(R) Wireless WiFi Link 5100
10 ...00 1e ec 3f 7b cf ...... Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
1 ........................... Software Loopback Interface 1
13 ...00 00 00 00 00 00 00 e0 isatap.phub.net.cable.rogers.com
12 ...00 00 00 00 00 00 00 e0 Carte Microsoft ISATAP #2
===========================================================================
IPv4 Table de routage
===========================================================================
Itin‚raires actifsÿ:
Destination r‚seau Masque r‚seau Adr. passerelle Adr. interface M‚trique
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.100 20
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
169.254.0.0 255.255.0.0 On-link 169.254.215.229 281
169.254.215.229 255.255.255.255 On-link 169.254.215.229 281
169.254.255.255 255.255.255.255 On-link 169.254.215.229 281
192.168.1.0 255.255.255.0 On-link 192.168.1.100 276
192.168.1.100 255.255.255.255 On-link 192.168.1.100 276
192.168.1.255 255.255.255.255 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 169.254.215.229 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.1.100 276
255.255.255.255 255.255.255.255 On-link 169.254.215.229 281
===========================================================================
Itin‚raires persistantsÿ:
Aucun
IPv6 Table de routage
===========================================================================
Itin‚raires actifsÿ:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
10 276 fe80::/64 On-link
11 281 fe80::/64 On-link
10 276 fe80::4da:b21b:843c:7bfd/128
On-link
11 281 fe80::a9d9:4618:2ae4:d7e5/128
On-link
1 306 ff00::/8 On-link
10 276 ff00::/8 On-link
11 281 ff00::/8 On-link
===========================================================================
Itin‚raires persistantsÿ:
Aucun
Début de la page Informations de protocole
Protocol Bind Information
SSTP based VPN
Microsoft TCP/IP version 6 - Tunnels
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Internet Protocol (TCP/IP) - Tunnels
Microsoft NetbiosSmb
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IP ARP Driver
Miniport WAN (IP)
Message-oriented TCP/IP Protocol (SMB session)
WINS Client(TCP/IP) Protocol
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IPv6 ARP Driver
Miniport réseau étendu WAN (IPv6)
Point to Point Protocol Over Ethernet
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Point to Point Tunneling Protocol
Layer 2 Tunneling Protocol
Remote Access NDIS WAN Driver
WAN Miniport (SSTP)
Carte asynchrone RAS
Miniport WAN (PPPOE)
Miniport réseau étendu WAN (PPTP)
Miniport réseau étendu WAN (L2TP)
Link-Layer Topology Discovery Mapper I/O Driver
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Link-Layer Topology Discovery Responder
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
NDIS Usermode I/O Protocol
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Début de la page Informations sur les équipements
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Device ID : PCI\VEN_10EC&DEV_8168&SUBSYS_FF001179&REV_02\4&492937F&0&00E2
Status : Enable
Driver Vender : Realtek
Driver Version : 6.205.403.2008
Driver Date : 4-3-2008
Intel(R) Wireless WiFi Link 5100
Device ID : PCI\VEN_8086&DEV_4232&SUBSYS_12018086&REV_00\4&3905AE0C&0&00E3
Status : Enable
Driver Vender : Intel
Driver Version : 12.0.0.73
Driver Date : 4-27-2008
Bluetooth
Device ID : ACPI\TOS6205\5&F592293&0
Status : Disable
Bluetooth Version : v6.10.07.2(T)
Début de la page Statut du commutateur de communications sans fil et de la touche d'accès direct pour réseau sans fil
Wireless Communication Switch : On
Wireless Hotkey (Fn + F8)
Wireless LAN : On
Solved!
Go to Solution.

Try this -
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
On your Vista Laptop, first disable the Wireless Network Connection and restart the Laptop, then Enable the Wireless Connection...
Then Click on Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Network and click on Add, select Manually Create a Network Profile and click Next, enter your Network SSID/Network Name, select WEP for Security type and enter your 10 digit Network Key and click on Next, it should say "Successfully Connected to ____" close all the Windows and restart the Laptop, now see if you can connect to Internet Wirelessly...

How to use both wired and wireless connection with static addresses

Now that I have setup my home network with static addresses (router, mini1, mini2 and PC) in the way I want, (big thanks to BDAqua http://discussions.apple.com/thread.jspa?threadID=1271635&tstart=0) I would like to understand some more advanced network concepts.
I would like to change the network so that I use both the wireless connection and the built-in ethernet connection at the same time in my Mac mini1. I would like to connect my PC to my Mac mini by using the wired ethernet connection so that I reach the Internet from my PC as well. I would also like to be in control of all the addresses therefore I want to assign the addresses manually.
The question: What addresses should I use between mini1 and PC? Should I use the same wireless address space as I already use between the wireless router and the other computers (router: 192.168.1.1, mini1: 192.168.1.101, mini2: 192.168.1.103) or should I use something totally different like 10.X.X.X? What should I put in ethernet connection "Router"-field, the same as in Airport (192.168.1.1)? What about DNS, same as in Airport?

If I understand this correctly, you wish your Mini to perform Internet Sharing for your PC, correct!?
If so you'll pretty much have to let the Mini handle DHCP & NAT on the Ethernet port. You also want to be sure Airport is dragged to the top of Network>Show:>Network Port Configurations, that's what position the Mini will use 1st for Internet itself.
On the Mini turn on both Web Sharing & Internet Sharing. The PC once connected will have the Mini's Ethernet IP as it's Gateway addy.

Wireless Connection with HP iPAQ 5450

Hi,
Someone please help me to establish a wireless connection between an existing wireless airport network with my h5450 iPAQ.
Thank you.

See if the great instructions from iFelix help:
http://www.efelix.co.uk/tech/2006.html

Wireless Connection with Sony PSP

Similar Messages

Maybe you are looking for