Wireless connectivity issue between MacBook Pro/ iTouch and Airport Express

I'm creating a wireless network at home using my airport express and depending on the configuration settings I set in the airport utility, I will face the following issues:
1- To connect my MacBook Pro to the wireless network created, I have to set the radio mode to 802.11n only (5 GHz). Any other radio mode (a/b/g compatible or n only (2.4 GHz)) will not work ("Couldn't find the network")
2- Conversely, the use of the radio mode 802.11n only (5 GHz) with my iTouch doesn't work ("Couldn't find the network"). To connect my iTouch to the wireless network created, I have to set the radio mode to 802.11a/b/g compatible or to n only (2.4 GHz)
As a result, I manage to 1) either connect to a wireless network created with my airport express with my MacBook Pro only 2) or with my iTouch only, depending on the configuration setup.
I'm using the latest updates for the airport utility (7.4.2), iTouch (3.1.3) and Mac OSX (10.6.4).
Any help on this?

if you set it to the most compatible with the least common denominator you should be able to connect with both. (If that's what I understand you are trying to achieve).

Similar Messages

  • Fix for wireless connection issues on MacBook Pro - reinstall OS!

    I hope this helps some of you out there.
    I was having all the usual problems with connectivity with the MacBook Pro I bought in January 09. It dropped the signal constantly and if I closed the top, it would make me search for my network again then it would give me the "connection timeout message" over and over again. I couldn't get anything done either at home or anywhere else. I finally took it in to the genius bar but they couldn't replicate the problem so I was sent home. The guy did, however, suggest reinstalling the OS (which I thought was a dumb idea since it had to be the airport card right?). Since it was a week away from the release of Snow Leopard I waited.
    Once I installed Snow Leopard all was fixed. It has now been almost 2 weeks and I haven't lost a signal once - the difference is amazing. I feel liberated!!
    Try a reinstall or upgrade to 10.6. and good luck. Post here to let us know if it works for you. Don't forget to backup your date first!

    Nope I'm not trying to tether.  I would like to be able to use a wifi connection on my mac and other devices.  I've gotten by so far just hooking up my mac to the ethernet port, but that requires me to be in my room.  I know its possible since there a bunch of networks nearby (locked of course), but I just can't figure out how to get mine working.
    I'm living in an apartment across the street from campus that is sort of school-owned...well its private but the internet service is provided by the campus since only students live here.  So we have to register anything that we want to use on the school's network.  On campus I can use wifi on my mac or iphone.  Its troubling how I can use the ethernet cable just fine, but when I connect it to my router (which I registered through the school as well)...nothing.  Technically this should be working easily - but maybe you're right on the network security accessability...or maybe my router is old...or my mac doesn't like my router?  I've had this problem before during my undergrad years except I was dealing with a cable provider and not the school.
    Maybe I should just make friends with my neighbors and find out how they set up theirs haha.

  • How do I share a 3G USB modem connected to my Macbook Pro with my Airport Express?

    Hi. I have a 3g USB modem connected to my macbook pro, and I want to try share the signal with my Airport Express (latest model).
    Now before everybody screams that it can't be done, I was searching the forums and found a discussion in which someone describes how to do it from 2008, unfortunately it is archived and I couldn't ask the author directly, and the description doesn't go into much detail.
    In the thread, the author describes turning internet sharing on to share the USB modem, creating a network on the macbook, then renaming the Airport Express network name the same as the macbook, and setting the AX to Join a Network.
    Problem being there is no description of whether the macbook connected to the AX via ethernet or wifi, what settings were changed on the AX eg bridge mode.
    Is this possible in theory, and has anybody had any success sharing a 3g USB modem via a macbook pro to an AX? I know there are other options like getting 3g ethernet modems, unfortunately not an option in this case - new house, waiting for DSL to be installed, 2-3 month wait.
    Thanks

    Well, you cannot use the 3G USB modem plugged directly into the Express. However, you can configure your MacBook Pro to do 'Internet sharing' (SysPrefs>Sharing) over the Ethernet port, and then connect your Express into the Ethernet port. Alternatively, you could always get your MacBook to 'create a wireless network'.
    new house, waiting for DSL to be installed, 2-3 month wait.
    You could always look for open WiFi networks to *cough*borrow*cough* .

  • Wireless connectivity issues with Macbook Pro and At&t service HELP!!!!!

    I have three Computers two PC's and one Macbook Pro( the latest model).My desktop PC is used by ethernet, my girls laptop is used wirelessly and finally my MBP was being used wirelessly.
    I started off with only the two PCs and my internet connection never had a problem and I was doing everything from: on the internet to downloading.
    Before I bought my MBP I had also switched from internet and phone bundle to just internet from At&t service. So when I got my first MBP I notice that I was loosing wireless connection with both my girls pc laptop and my MBP so i thought it was because I had just switched service, though they send out a service technician and we came to a conclusion that it was the MBP. (I was loosing signal via wireless and ethernet). So we tried to see if both my girls laptop(wireless) and my PC desktop (ethernet) would run into the same issue which it did not.(MBP was turned off)
    So I decided to go my nearest Apple store and let them know what was going on. So I told them what was going on and they said It must be the airport card, and they ended up changing it. When I get home I discover that not only I am having the same issue but other issues too. I went back they ran some diagnostic and they said it was defective and they gave me a new one few days later.
    So in the mean time that I waited for my new one to arrive I used my PC desktop and my girl kept using her laptop and guess what no issue what so ever for one whole week. Now I receive my new MBP(they bumped the specs a little), went home set it up and still the same issue though I dont have the issue when Im using via ethernet. Just a view minutes ago I tried removing the ethernet and using the airport/wireless and within a few minutes I lost the signal.
    I have the gateway 2WIRE model(2701HG-B) modem/router.
    Is there something wrong? what do I have to do to make this work?

    Hi Guys, I bough my Mac almost two years ago. All this time I have experienced the same issue. There are tons of discussions re this issue in the internet. Unfortunately, Apple has done nothing to fix it. I have tried a lot of different options, but they work no longer then 1-2 days. The official fix - does not exist so far. It is quit strange, isn't? I can share my experience: if you go to AirPort Utility - Manual Setup - Wireless and then change Channel, it could help you till the moment you restart your computer; next time you need to repeat it again. It takes 2 minutes. Not sure that it would work for you but you could give it a try. Well, not the best option. Anyway Apple must fix it asap! Hello Apple, do you hear us? Good luck.

  • Connectivity Issue Between MacBook Pro and Mac Mini

    I have a MacBook Pro and a Mac Mini both with Yosemite 10.10.2, I've never had any issues with them sharing a connection when I was home, (I've never been able to connect outside of my home network) but I use the Mini to backup my MacBook Pro, but has of February 11th my MacBook Pro doesn't see my Mac Mini no matter what I do. I can share the screen from the Mini to the Book Pro but I can't remotely access the Mini from the MacBook Pro. I've turned off Back to My Mac on both Macs and removed it from my Airport Extreme and re-entered all of the information. I signed out of iCloud on both Macs and signed back in. I haven't changed any settings at all before I lost the connection, I am not sure how to resolve this issue.

    Hey there GRivera210,
    It sounds like you are having issues with using Back to my Mac. I would recommend using the troubleshooting outlined in the following article to help resolve the issue. It also has a contact for the iCloud support team if it doesnt resolve it:
    If you have issues using Back to My Mac
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • My HP ENVY 100 D410a is connection issues between MacBook Pro OSX 10.6

    Both my Macbook Pro OSX 10.6  and my HP Envy 100 D410a is connected to my wireless nextwork. Everything was working fine until recently, my macbook does not connect, - keeps saying the printer is offline when it clearly is on and connected. I have tried to reinstall all printer software and drivers from CD and the HP site, it fails when the laptop tries to connect to the printer.
    Any advice / help would be appreciated.
    Thanks.

    Macuserlovenit wrote:
    Can I delete a network I created and now want gone outta the router(airport extreme)?
    Sure.. a reset will surely do it.. a removal of the offending name will also do it.
    Can I delete all networks by resetting the router back to factory settings?
    Sure can.
    I also have this UPDATE "A newer version 5.6.1 of airport utility is available"  it KEEPS opening when I open my Airport Utility APP, but when I click on it to UPDATE nothing happens, ever. Im already running 7.6.3
    Bit of confusion here.
    Latest version of the airport utility for snow leopard is indeed 5.6.1
    Open the airport utility, about .. and check what version you are running.
    The very latest airport utility is 6.3 and only can be installed on Lion or Mountain Lion computers.
    The firmware latest version is 7.6.3
    which makes it all a bit confusing.

  • XBOX 360, MacBook Pro, PC and Airport Express don't all connect

    Just got the new XBOX360 with built in wi-fi for Christmas! Also have a MacBook Pro and a PC connected wirelessly to my Airport Express.
    Prior to the XBOX 360 the ApE worked flawlessly with the MbP and PC.
    Now, depending on the day, either the PC or the XBOX will not connect with the ApE. I can connect wirelessly to XBOX Live one day, and not connect wirelessly to the PC the next and vice versa.
    Powering off the cable modem resolves this, but only for one day, then the problem returns. Any suggestions?

    By default, both should already by DHCP clients ... but it is possible that either or both were reconfigured with static IPs that may not be correct for your network configuration.
    For the PC, I would need to know which operating system it is running.
    For the Xbox 360, you configure, whether or not, it would be a DHCP client via the System Settings > Network panel. The key is that you want both the IP & DNS Addressing to be "Automatic."

  • Wireless Connection Issues with Macbook Pro

    Maybe this is an OSX issue, but I'm not too sure.  I'm trying to set up a wireless access point through my school's internet, but I'm having some issues.  They provided information on how to set up the router, so I did just that.  However, when I connect and try to visit a webpage, I keep getting "Wi-Fi has the self-assigned IP address 169.254.....(don't remember the rest) and will not be able to connect to the Internet."
    I'm using the Linksys WRT54G v6.0 and I set up the network to the school's liking: disabled DHCP (so users are forced to talk to campus in order to connect) and enabled MAC filtering.  My computer and router MAC addresses are registered with the school so I can access the internet.  Ethernet works just fine on my computer, but I would like to be able to connect my iPhone and iPad to WIFI while I'm at my place.
    I feel like the problem has to do more with my computer than the router since I've had these issues on different routers with other Macbooks while my friend's PC's worked just fine to connect.
    I contacted the school's IT, but they won't help me when it comes to personal routers.  Oddly, there is a separate IT for residence that offers help, but they're closed for the day.
    Any suggestions?

    Nope I'm not trying to tether.  I would like to be able to use a wifi connection on my mac and other devices.  I've gotten by so far just hooking up my mac to the ethernet port, but that requires me to be in my room.  I know its possible since there a bunch of networks nearby (locked of course), but I just can't figure out how to get mine working.
    I'm living in an apartment across the street from campus that is sort of school-owned...well its private but the internet service is provided by the campus since only students live here.  So we have to register anything that we want to use on the school's network.  On campus I can use wifi on my mac or iphone.  Its troubling how I can use the ethernet cable just fine, but when I connect it to my router (which I registered through the school as well)...nothing.  Technically this should be working easily - but maybe you're right on the network security accessability...or maybe my router is old...or my mac doesn't like my router?  I've had this problem before during my undergrad years except I was dealing with a cable provider and not the school.
    Maybe I should just make friends with my neighbors and find out how they set up theirs haha.

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • Whats's the difference between MacBook Pro 13 and 13.3 ?

    This, Whats's the difference between MacBook Pro 13 and 13.3 ?

    Firstly, you are not in MacBook Pro forum, so you need to get your bearings.
    2nd check the specs page
    http://www.apple.com/support/macbookpro
    Then Bing/Google for reviews, Ars is always good but dozens have done one.
    2011 brings Intel Sandy Bridge processor boards, Thunderbolt, SATA3 (6G) along with options for SSD and much more RAM (can save buying RAM and doing the upgrade yourself)

  • What is the difference between MacBook pro 2011 and 2012

    What is the difference between MacBook pro 2011 and 2012

    understanding that at the time of the question, there has not been any Macbook Pro 2012, now it is later and there is.
    The difference is:
    -CPU being used (2011 models: Sandy Bridge, 2012 models: Ivy Bridge)
    -Graphics (2011: intel 3000 + on 15"/17" ATI, 2012: intel 4000 + on 5"/17" nvidia Geforce 650M)
    -USB (2011: USB2.0 only, 2012: USB3.0)
    -Bluetooth (2011. 2.1 + EDR, 2012: 4.0)
    Ivy Bridge CPUs are smaller and are a little bit more energy-efficient.
    Other than that, currently the devices are not much different in respect to performance (Apple's graphics driver performance is known to increase during upgrades, though, so the performance gap may widen up)

  • Stream Safari/DVD audio from my Macbook Pro to my Airport Express.

    Is there a good way to stream all audio from my Macbook Pro to my Airport Express? Not just simply the iTunes audio.

    This does work in general but not for my particular need.  I have a Mac G5 using ProTools and a MBox digitizing vinyl (USB connection).  I am on a MBP getting work done elsewhere in the house, but want to listen to the music and especially to tell when album side is done.  To get music to the MBP,  I have plugged the G5's line inputs to the MBox line outputs, then used messenger to create a chat with the MBP.  Too bad I could not get the G5's input to be the MBox, but ProTools wants sole control.  Works OK, but the messenger output on the MBP will NOT go to the Apple Express, just the speakers or headphone out jack.

  • MacBook Pro that  my Airport Express WiFi profile was created crashed. Can i reset the Airport Express either to an iPad or Windows 7 computer?

    MacBook Pro that  my Airport Express WiFi profile was created crashed. Can i reset the Airport Express either to an iPad or Windows 7 computer?

    Get the Airport Utility for the your iPad from the App store. You will need to know the password for the Airport Express (not the WiFi password) to access the AE. The iPad utility will, I think, do all of the actions to control your AE.
    You can reset the AE back to factory default but with the iPad app you should not ned to.

  • Connection issues with MacBook Pro and DVI to component video

    How do I connect a 2007 macbook pro to a regular tv (non-hd) via the DVI port with component cables? The image is always scrambled. The connections are fine, what do I need to do?

    Concerning this comment:
    I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...
    I would like to point out that 1080p has a lower pixel clock than will 1920 x 1200. So it could be the stability problem is only present when the pixel clock is at the high end of the range.
    You could return the adapter and try another. A new one might have better margins. Another thing you could try is to use a utility like SwitchResX to lower the pixel clock and see if stability improves.

  • Wireless connection of a Macbook Pro to a PC wired to a cable modem

    Hi all, I am planning to connect my new Macbook Pro to a wireless network that I will be setting up in my home. Currently I use a wired DSL cable modem that is connected to my PC. My Macbook Pro will be downstairs (wireless) and my PC is upstairs where the cable modem outlet is. I will also want to connect my PC's printer to the wireless network so that my MBP can use it. So....are there any issues I should be aware of regarding connecting, speed issues, compatibility issues, bugs, etc?
    Also, what hardware (router, ethernet hub, air-port, etc) do you recommend to make this work? (Mid-range price.)
    Thanks very much.

    not mid range price but usefullness and functionality for usb connected printers and hard drives and usage for Time Machine backup....Apple Extreme N router educational buy about $165.00

Maybe you are looking for

  • Extracting from DVD to FCP

    Greetings, I need to extract a 30 sec commercial from a DVD to edit it in FCP and then add subtitles to it in DVD SP and burn it to DVD again. My question is, for a 30 second commercial that is 720x480 NTSCP, what are the best settings fo extracting

  • How can I hide the text of a SMS or MMS displayed on my iPhone?

    When I receive a sms some of the text of the SMS is showed on the iPhone. How can I avoid this, only showing that a sms has been received. Kenneth

  • Tabular form query using column values delimiter

    I wanted to know, if i can query a tabular block by entering the column values (primary key) as semicolon delimited and update required fields. Please let me know. Requirement:- User will enter 5 values as "AB1; AB2; AB3; AB4; AB5" After entering I n

  • ZFS and grown disk space

    Hello, I installed Solaris 10 x86 10/09 using ZFS in vSphere, and the disk image was expanded from 15G to 18G. But Solaris still sees 15G. How can I convince it to make notice of the expanded disk image, how can I grow the rpool? Searched a lot, but

  • Retention periods same for the deletion and for archiving then deletion

    Hi, Is Retention periods same for the deletion and for archiving then deletion. Can we delete canceled messages directly in XI wihtout archiving them ? I want only deltion of messages from XI. Regards Sree