Wireless devices can see wireless network but not connect

Can anyone please assist? I have a WRT54GS v2. My wired computer accesses the Net fine and I can see MAC address, IP Address, DNS, subnet mask, default gateway in the linksys browser software. The devices can see the network with strong bars but cannot connect.
HELP!
Thanks,
Solved!
Go to Solution.

It is possible that the router could have encountered some wireless interference, doughboy17. You may try adjusting the wireless channels of the router. Use channels 6, 3, 1 and 11. Have you tried checking if you still have the correct Wi-Fi password?
If you have the correct network settings, try requesting for the firmware file and perform an update. That might help in resolving this matter. Or, you may proceed on doing a factory reset and configure the router again.
Help, learn and share

Similar Messages

Can see the network but not the basestation

I've seen lots of problems for configuring an older (Dual Ethernet) base stations, however I've not seen a problem quite like mine. both of my laptops can see and connect to the network, however the connection doesn't get past that point. This has happened before, however the new part is that neither of my laptops can find the base station via the airport admin utility. I have a MBP running leopard and a TiBook running 10.4.10 and they both have the same problem.
I've tried using the configure other option and enter the IP address for the router but I always get an error code. I've tried connecting via either of the 2 ethernet ports as well and neither of my computers will acknowledge that the base station is there. I've checked the original documentation and the lights are behaving as though nothing is wrong other than no network activity.
I'm loosing my patience and I'm about the throw the thing out a window

I have a similar problem with my TiBook G4 10.3.9 and my Airport Snow. The laptop does not see the base station and tells me I have no network selected. The TiBook sees other networks and lists them in Internet Connect, but my account is missing. The base unit seems to be functioning properly, flashing all the requisite lights.
I've tried using the Airport Setup Utility and the Airport Admin Utility to reconnect but neither sees the base unit. Any suggestions would be appreciated.

My ipad is not allowing me to join thenetwork. i can see the network but when i try to click it, it will not allow me to join. pls help

my ipad is not allowing me to join thenetwork. i can see the network but when i try to click it, it will not allow me to join. pls help

The next iOS update won't change this.
Are you able to transfer anything else from your iTunes library and computer via the iTunes sync process such as a movie, TV show, podcast, audio or print book, apps, and photos from your computer?
What is selected under the Music tab for your iPhone sync preferences with iTunes.

Bonjour - Mac A can see Mac B but not vice versa

Hi
Very odd behaviour with Bonjour. Up until yesterday, my macbook pro (call it A) would see my mac pro (B) - it would appear automatically in A's sidebar, I could listen to B's iTunes library on A and so on. No problem and there hasn't been for a couple of years. B could not see A - but I didn't really need it to and this wasn't an issue.
Suddenly, this morning, the situation is completely reversed. A can no longer see B at all, but B can see A.
I can connect both ways by using 'Connect', I can ping both ways, but I can't get A to discover B using Bonjour.
The only think I've done that I can think can have caused the changes is to use Omnifocus sync (with B holding the sync server) - it worked fine all day, but overnight Bonjour seems to have reversed itself as described above.
Bonjour Browser shows me that B can see A, but A can't see B. I have identical settings on both machines for sharing, network, firewall (all everything).
Bizarrely, for one two minute period a couple of hours ago, the situation reversed itself (A could see B but not vice versa), but then immediately went back to B can see A, but not vice versa.
Both computers are running the same version of Leopard (10.5.7). I've reinstalled the OS on B, just to see, but this hasn't improved matters.
I can find nothing on google or this discussions forum to explain this bizarre behaviour - most support threads seem to peter out without being resolved. Has anyone any idea what's going on please? I'm quite happy getting stuck into the command line, if that's needed.
Many thanks
David

The Macbook Pro is connected wirelessly to the router, the Mac Pro connects to the same router by ethernet.
As far as I'm aware, I'd made no changes to any of the setups (computers or router) before the problem occurred: bonjour worked fine, but in one direction only (the MBP could see the Mac Pro, but not vice versa). Now, the Mac Pro can see the MBP, but not vice versa - and this is a problem because my printer and itunes server both sit on the Mac Pro.
I've set all the firewall and security settings I could find to transparent access - and (except for the obvious difference between the wired and wireless links), the setups are identical on both computers.
By the way, I can connect to the Mac Pro easily enough and transfer files, I just can't see it via bonjour or use Screen Sharing (again the settings haven't changed since they were working!)
Many thanks
David
Many thanks
David

I have just downloaded itunes to my new laptop. I can see purchased music but not all my cds - do i needto reload them?

I have just downloaded itunes to my new laptop. I can see purchased music but not all my cds - do i need to reload them?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

HT5361 suddenly I cannot see my gmail in my inbox on my macbook. I deleted the gmail account and added it back but I cannot see new gmail in my inbox. I can see sent gmail but not incoming gmail. The gmail is visible if I go to my google account on goo

Suddenly I cannot see my gmail in my inbox on my macbook. I tested it and I can see my gmail in google. I deleted my gmail account on my macbook mail and re-added it and still cannot see incoming gmail. I can see new icloud e-mail. I have both a gmail account and an icloud account. For my test e-mail in gmail, I can see sent gmail but not incoming gmail. How do I fix this?

Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
Try re-indexing the mailbox. This can take awhile if you have a lot of mail.
Reindex messages
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages

The power went out and when it returned the network name and password was lost. I can see the network in my connections and connect to it. How do I get it back to the orginal name and password. I have an HP laptop

The power went out and when it returned the network name and password was lost. I can see the network in my connections and connect to it. How do I get it back to the orginal name and password? I have an HP laptop.

Chances are, there was a signficant power surge or voltage fluctuation just before the power went out. This type of thing can cause the AirPort Extreme to reset back to default settings.
If this occurs, your only option is re-configure the device again, just as you did originally.
In order to improve your chances this next time this happens, (especially if you live in an area where thunderstorms are severe), a good quality surge suppressor / voltage limiting power strip will really help, and may save you the entire device or a nearby computer next time something like this occurs.

Trying to transfer pictures from device to BB desktop pictures but not connecting.

hi
Trying to transfer pictures from device to BB desktop pictures but not connecting.
seems i was able to back up.
downloaded new software to desktop while BB was connected vis USA to computer.
Solved!
Go to Solution.

Well the new Desktop Manager can ONLY sync up with a Media Card. You would need to download Desktop Manager 4 with Roxio Media Manager to access the device memory.
- Please Thank the person that helped you by giving them Kudos. Click the Kudos Button (beside the Reply Button) at the bottom of the post which helped you.
- Please resolve your thread by marking the post "Solution?" which solved it for you!

Can see and recognize my wireless network and Internet is working, but I can't connect with ANY computers/iPad/iPod/air TV, etc. I have reset the time machine several times, and can see the network, but cannot access it with any device. PLEASE HELP!

I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!! I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY!

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

I can connect to my wireless network but not the internet

Hi. I've had my iBook G4 for just about a year and it's worked fantastically... until recently. My roommate has a PC and a linksys wireless router, and I've always been able to connect wirelessly to the internet until last week. I came home from work one day, and my iBook "saw" our wireless network and could "see" other computers on the network, but could not access the internet. My roommate had no problem accessing the internet through the wi-fi on his Dell laptop. So I zapped my p-ram and fiddled with some settings, but I still had the same problem.
Next I re-installed OS X, and tried again. Still the same issue. Of course, by this time I'm getting frustrated, but then about 12 hours later I decide to try it again and it just works! Like there was never any problem....
So anyway, it worked like a dream for about a week and now I have the same exact problem again! It connects to the network but not the internet. Is this a known problem? Any help would be GREATLY appreciated.
Thanks,
-joe.
iBook G4, 1.2 ghz Mac OS X (10.3.9) 256mb, combo drive

i was having the same issue with all my devices. everything would cut out and i would have to reboot my router...my internet service provider is ATT and i have a Uverse router. i went to their online support and i was able to chat with a tech support agent and they ended up changing the channel of my router and that has resolved my problem....i am currently steaming pics from my iphoto library to my apple tv and my wife is streaming music from her iphone at the same time...support tech stated that usually they have the router set to a generic channel that usually has a lot of traffic.

Airport Express I can connect to my wireless network but not the internet.

The computer I set up my Airport express on works fine. But my other laptop in my house connects to the network but not internet. Why is this?

i was having the same issue with all my devices. everything would cut out and i would have to reboot my router...my internet service provider is ATT and i have a Uverse router. i went to their online support and i was able to chat with a tech support agent and they ended up changing the channel of my router and that has resolved my problem....i am currently steaming pics from my iphoto library to my apple tv and my wife is streaming music from her iphone at the same time...support tech stated that usually they have the router set to a generic channel that usually has a lot of traffic.

NB200 Can connect to wireless networks, but cannot connect to the internet

I have been able to connect my Win XP netbook to my secure wireless network at home, other people's networks and public networks like the library and McDonalds. This week I'm away from home and discovered that while I can still connect to a number of different wireless networks, I cannot connect to the internet using Internet Explorer.
I've had this problem once before and fixed it by reinstalling Windows XP and all my other software. I have no idea why it has happened again. I'm hoping for a less drastic solution to the problem..?

Hi Nakia,
> I cannot connect to the internet using Internet Explorer.
Have you tested other browsers like Mozilla Firefox and does this work?
As MasterG wrote try to renew the IP address using the commend line.
Last week I had a similar problem and I could solve it by updating the WLAN driver. Just remove the driver, restart the notebook and install the newest one. :)

My mac can see the network but won't connect to the server

I have an intel Imac. The network connect is working but very squirrelly. I see most objects on the network. I can see the server but it will not let me connect.
I go to another mac and I can connect to the server. So I think its my mac 10.7.5 is the OS

Probably nothign to do with your iMac or OS X, have you attempted resetting your router? Also you haven't stated what messages you are getting or any other information. If this is at your work then I'd suggest contacting your IT support person, the connection to your network may be on their end.

Document library: user can see the metadata but not the file itself

Hello,
For a specific document library certain users will have the right to see the metadata but not the file itself. The only solution I can think of is using a http handler. But I don't know if I can get the user that requests the document.
Are there any other approaches to this requirement?
Can I get the username of the user that makes that request?
I guess that http handler is deployed at the Web application level - am I right?
Thank you
Christos

Nicolas, thank you for your answer.
I think this this is not a strong protection. Everybody can istall sp designer or go through UNC path, like \\myserver\documentlibray or \\myserver\lists\mylist and see the documents- and we use unc paths a lot. I don't want to get into trouble when a (wiki)
leak is made.
Christos

IPhone can join WRT54GS network, but cannot connect to internet

I've got a WRT54GS v.1.1 router w/latest firmware (4.41.4). My wired and wireless computers (windows XP) can connect just fine and see the internet. My iPhone 3GS can join the network, but cannot see the internet. The phone can join the network, gets a DHCP address/gateway/DNS info just fine. Other machines on the local network can see the phone and vice-versa. However, any time the iPhone tries to reach out to the internet, a message pops up saying "Safari cannot open the page because it is not connected to the internet".
Again, other machines on my network can connect without issue. My iPhone has no trouble connecting to other WiFi networks.
I've tried all different wireless encryption schemes, including no password/encryption, with the same results each time. I've also tried using a static IP address on my phone. No luck. MAC filtering is disabled, as is any other access restrictions.
Finally, I've reset the phone's network settings, reset the router to its factory defaults, and tried everything else I can think of.
I've only seen one similar message one these boards with this problem, but it was never responded to. Anyone seen this before of have other suggestions?
Thanks in advance for any help.
David

Thanks for your response!
IP: 192.168.1.100 (DHCP-assigned)
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DNS: 66.218.44.5, 66.218.44.90 (the DNS's of my ISP)
Router's (local) IP address is 192.168.1.1
Router's internet-facing address is the one assigned by my ISP via their DHCP
All looks right to me.
-David

Wireless devices can see wireless network but not connect

Similar Messages

Maybe you are looking for