Wireless down after downloading itunes5
after following the 4 steps to install itunes5 i am left without a wireless connection.
I am needing advice on how to reverse the steps taken to disable bonjour, error 1920, and my firewall settings to install itunes.
I have a hunch that my failure to connect is do to connection restrictions-- right now my norton's is complete disabled.
thanks for any help,
rachel
Ok- In general, here is what you need to check next. You need to go to the configuration settings of your router, verify that your wifi is in fact turned on, and note the name of your wireless network.
Here is instructions for your router...
http://www.filesaveas.com/bthomehub_wireless.html
Do all steps until "Setting up a device to connect wirelessly"
After that, you need to bring your Mac mini within range of the wifi network (next to the router would be good to eliminate variables), start up the mini, and verify the following- 1. verify that Airport is turned on. 2. Select the wifi network you just configured. 3. type in the password you set in the wifi configuration step. 4. Try to access internet with Mini.
If all that works, then we have narrowed the problem to the wifi extender.
If that doesnt work, there might be a problem with the security settings of the router, interference (like a microwave is on or something like that), or another variable- let us know.
Similar Messages
-
How to set auto shut down after download finishes?
How to set notebook to auto shut down after Firefox finishes download?
Firefox 4 Auto Shutdown has been updated for Firefox 4 and has been featured here - [http://www.techiechips.com/auto-shutdown-after-download-firefox-4/ Auto Shutdown after Download for Firefox 4]
-
My iPad will no longer connect to my wireless sony speaker after installing IOS 7.0.4. I have reset the speaker and reinstalled through NS Setup but still no joy. Any advice would be most welcome. Thanks.
Hi,
When Zeen's battery level goes below 5 %; it tends to Reset to Default where it looses all the connections and sync to the printer or router.
So its very important to make sure that Zeen's battery does not go to low. To avoid this I would suggest to charge Zeen regularly.
You may try the steps below as of now and check the results.
We need to Factory Reset the Zeen making sure it is connected (Docked) on the C510a printer.
Once it is docked try the steps below:-
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Open the above link; and then perform the Factory Reset as shown in Solution Two.
Once completed try connecting to Wireless and check the results.
though I am an HP employee, I am speaking for myself and not for HP. -
ENTOURAGE shuts down after downloading images from e-mails
I can download images from all of my web-based e-mails, including our web-based exchange. However, when I try to download images directly from Entourage, my hard disk slows down and makes intermittent thinking sounds until it finally downloads the image and then Entourage shuts down. I've reported this to Mac 1/2 dozen times and have had no response. Has anyone had similar problems? Thanks.
From the noises you describe, I'd be far more worried about the condition of the hard drive. Back up any important personal data immediately. I think the relation to Entourage is only circumstantial. The hard drive is the real problem.
-
Iphone slowed down after downloading ios7.1
I have an i phone 5. I recently upgraded to ios7.1. I notice that the touch senstivity has gone down. The scroll speed has become slightly sluggish. Anyone else experiencing the same? Any solutions please?
Hello, Arshash.
Thank you for visiting Apple Support Communities.
Try forcing all applications to close and power cycle the device. Once this is done test the functionality of your iPhone.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Cheers,
Jason H. -
System slow down after lion update 8/18/11
Has anyone else had a problem with their system slowing down after downloading the system update for Lion on 8/18? My system is not nearly as responsive and is only about two weeks old and have not installed any software other than Microsoft Office 2011 when I bought the machine. Any ideas?
Ok my system is booting and shutting down faster now.. This method worked for me:
First, I repaired the permissions:
1) Open up Disk Utility
2) Select your hard drive
3) Now select Repair Disk Permissions.
Then, I deleted the caches folder:
1) From the Finder's Go menu, select Go To Folder, and go to this folder: /Library
2) Delete everything inside the Caches folder (This might require the Admin Username & Password)
Finally, go to System Preferences and click on Startup Disc then click on your boot drive (In my case I've selected my HD labeled "Macintosh HD Mac OS X, 10.7.1". Now do a restart by clicking on the Restart button. If you don't have a Startup drive selected your mac will waste time at boot searching for a suitable boot drive !
I Hope this works for you as well.
Cheers! -
I have a MacBookPro and just downloaded the new Firefox 4.0.1. When I use my laptop wireless the computer shuts down after a few minutes. What can I do?
Do you experience the same issue using other browsers, e.g. Safari?
-
After downloading Yosemite my printer, a HP Photosmart D100 will no longer print. The wireless connection is fine, and a test page printed perfectly directly from my printer. When trying to print from my computer, it says it cannot connect or find the printer. I tried downloading the most updated software from HP website but it doesn't appear to be helping.
Try resetting the printing system.
OS X Mavericks: Reset the printing system
If you have the printers IP address open Terminal (applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
Network Printer Troubleshooting
HP – Wireless Printing Center
HP – Printer Not Found During Wireless Installation -
i tried updating my ipad over a wireless, after downloading the update i was unable to install with a message an error occurred installing ios 7.0.3
Hello mom_5_01,
The following article should be quite beneficial in your endeavor to update your iPad.
iPad: Unable to update or restore
http://support.apple.com/kb/HT4097
You may encounter the following symptoms while updating or restoring your iPad:
iPad continually restarts but never displays the Home screen.
An update or restore did not complete and the iPad is no longer recognized in iTunes.
iPad stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.
If this occurs, you can place iPad into recovery mode and attempt to restore again. If iTunes displayed an alert with an error code, see this article before attempting the steps outlined here.
Cheers,
Allen -
home sharing shuts down after 5 min when watching a movie. any solutions. already downloaded itunes from apple. did not work.
Make sure your computer is not set to fall asleep. Also check www.istumbler.net (netstumbler for windows) for interference on the network
-
After downloading and installing OS X Update 10.10.3 I am not able to open my Phot App. It opens and immediately shuts down. I've sent messages to Apple for help and no answers. Help!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I was updating my iphone 4 wirelessly to ios7.0.2 ,after downloading the software it stated to install but i never got started again. only apple logo is appearing on the screen ....please help me out ..thanks
Hello taranpahara,
The following article provides steps that can be quite helpful in getting your iPhone updated.
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/TS1275
Cheers,
Allen -
I am downloading a 6.4GB game with Safari. Download starts very well, 850KB/s but systematically after 10 or 15mn speed goes down until download stops. Can somebody help please?
systematically after 10 or 15mn speed goes down until download stops
Check with your iSP. There may be a limit to files sizes. -
After downloading iOS 6, I can't seem to shut down my phone after holding the lock and slide key. Phone not jailbroken
You mean lock and home key right? I have the same problem with my 4th gen iPod touch. Seems as though if I hold the buttons again a 2nd time, the iPod automatically restarts as it loads the apple screen that appears when you turn on the iPod/iPhone but I can't get the iPod to stay turned off.
-
Cannot use safari even though I have 4 bars. It works fine on lap top and wireless printer. Happened after downloading IOS7
Go to Settings > General > Reset > Reset Network Settings
After that Reset let the iPad reconnect to your Wi-Fi.
Maybe you are looking for
-
Since upgrading to Firefox 6.0.2 it crashes a lot more often. Usually when I try to open certain pages, but I don't know what on those pages might be causing the crash because I can't read them. I came to this site and clicked on the link to "Fix slo
-
How to erase a misspelt apple iD in the icloud account?
Hi, I set up a icloud account on my iphone. Unfortunately, the email/apple ID I typed in was misspelt. In my iphone - setting - icloud, the phone is trying to vertify the account, but cannot because there is no such email and therefore cannot be v
-
Westell versalink 327w modem wireless problem
I just set up the modem for wifi to connect my ipod touch I just bought. I got it connected but the internet went VERY slow on the ipod. As I was trying it out, I noticed the wifi connection strength go from 1 to 3 bars randomly. Eventually it just k
-
New Tab Opens Slowly in Firefox 8
In Firefox 8, if I open a new tab, the tab opens in about 400 milliseconds and the display of the new tab perceptibly moves from the start of the tab on the left to the end of the tab on the right. If you close a tab the tab closes in the same time f
-
Is there a way to permanantly disable the F7 shortcut for cadet browsing?
I'd like to use the F7 button as a hotkey to play/pause my media player, however whenever I press it I get prompted about "cadet browsing". Checking the "Do not show me this dialogue box again" has no effect, it will continue to pop up.