Wireless drops on the move of my MacBook Pro 15

My MacBook Pro 15 (Early 2011, Lion 10.7.3) keeps dropping the wireless connection when I move the computer around the house. There are no issues on the wireless router capacity cause i can still use it from outside the apartment, but it immediately disconnect when I move a couple of meters. What is happening? What can I do?

I have the same issue with my MacBook Pro with Lion OS, when moving from one office to the next.  This is why we use MacBooks, so that we can be mobile between meetings etc.
It's extremely frustrating, as if you're downloading items, you cannot move until the download is complete as most times, you need to re-start the download from scratch.  This is impractical, and it would be even more impractical to put the MBP to sleep prior to moving between offices.

Similar Messages

  • I have a Lumix DMC-FT3 Camera and i can't play the Movies on my MacBook Pro

    I have a Lumix DMC-FT3 Camera i Don't seem to be able to down load the Movies i take it down loads the Pictures no worries but not the Movies Can Someone Help me Out Please.
    Cheers,
    Madmax.14

    If you are downloading via iPhoto, the movies should be downloaded directly along with the stills.

  • When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine.  Any ideas on how to get 5.0 working?

    When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine both placed.  Any ideas on how to get 5.0 working?  I thought 5.0Ghz was supposed to have a wider range.  Do I need to change a setting on the Macbook Pro?
    Thanks, W

    I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
    The upside is that the 5 GHz signal will allow faster speeds.
    The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
    In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
    If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

  • The lastest iTunes upgrade broke my wireless syncing between my iPhone and my Macbook Pro

    iTunes was actually working before the latest update. Now I cannot wirelessly sync my phone to either my MacBook Pro or my PC.

    Hi, AppleJR.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are unable to sync via Wi-Fi after updating iTunes. I would start with going through the troubleshooting steps outlined below. 
    Quit and reopen iTunes and restart your iOS device
    Quit and reopen iTunes on your computer. Then, restart your iOS device.Restart your network router
    Restart your home network router using the manufacturer's instructions. You may need to disconnect the power cord for 30 seconds or more.
    Note: During this time, Internet services, such as a VoIP-based phone, won't work, and you may need to reset additional network devices.Check your network connection
    Make sure that your Wi-Fi network has an active Internet connection.
    Make sure that you connect your iOS devices and computer to the same network over Wi-Fi.
    Check for network configuration changes that may interfere with syncing:
    VPN configurations
    Extending the Wi-Fi network through multiple wireless access points or routers
    Guest networks or other security configurations that limit access between devices
    Routers that configure different networks for different frequencies such as 2.4 GHz and 5.0 GHz
    Connecting the computer over Ethernet
    Wake up your computer and open iTunes. If your computer is asleep or iTunes isn't open, the device may not sync.
    Update your router. If you're using an AirPort or AirPort Time Capsule, you can learn more about firmware updates. If you're using a router from another manufacturer, contact the manufacturer to ask about available updates.
    Check for network interference
    If you see performance issues when you sync over Wi-Fi, something may be causing wireless interference:
    Microwave ovens
    Cordless phones
    Physical barriers, such as metal walls or distance between your computer, base station, and iOS device
    Try the following to reduce network interference:
    Move your iOS device and computer closer to the Wi-Fi router or base station.
    Check for sources of potential interference.
    Remove your iOS device from any case, stand, or attachment.
    Open Safari and try to load a webpage.
    Check firewall settings
    If you enabled a firewall on your router or computer, make sure that your computer and iOS device can communicate.
    Follow these steps to use the built-in firewall option with iTunes on your Mac.
    For third-party firewalls and security software, see the developer or manufacturer for assistance.
    Mac computers use port 123 to set the date and time automatically. Incorrect date and time on a computer or iOS device can cause connection issues. If you don't know if your router has a firewall or if the required ports are open, follow these steps:
    Enable Wi-Fi syncing for additional iOS devices on your network to see if they have the same issue. (See the previous steps to enable Wi-Fi syncing for additional devices.)
    Test your device on a different network. If the device works on another network, the issue may be your router or network configuration. Contact your router manufacturer or Internet service provider for additional troubleshooting.
    If you use another security or firewall software on your computer or router, you can troubleshoot security software issues, contact the manufacturer, or check the documentation to learn how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    -Jason H.  

  • I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
    Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

  • Im trying to watch movies from my macbook pro to my new vizio, but when I connect the minidisplayport to HDMI cable to input 2, and switch the input from my remote to that input, nothing happens.  What am I doing wrong?

    I am trying to watch movies from my macbook pro (2010) on my new vizio tv.  I connected the minidisplayport to HDMI cable (bought from the apple store) and switched the input to the right input but nothing happens. What am I doing wrong?

    Hi T,
    Open Sys Prefs > Displays and check the settings there.

  • I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how.  I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click.  Help?!!

    I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how.  I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click.  Help?!!

    If you have iTunes 11 on your Mac then you can enable the left-hand sidebar via option-command-S, that might make it easier to navigate.
    Connect the phone to your Mac and select it on that left-hand sidebar, and on the right-hand side of the screen there should be a series of tabs which you can use to select what to sync to the phone. If it's an audiobook then it should appear on the Books tab for selecting/syncing, and films will be on the Movies tab. When you've got the audiobook on your phone you should get an Audiobooks option in the Music app (you might need to tap the '...' tab at the bottom of the Music app to see it).

  • I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing- Any suggestions? I have iTunes Match turned on and everything.

    I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing… Any suggestions? I have iTunes Match turned on and everything.

    Thanks Terence! I can see iTunes library from neither iPhoto or iMovie . I'll check on iTunes forum.

  • HT3746 how do i move the macintosh icon off the desktop on my macbook pro

    How do I move my Macintosh HD icon off the desktop of my Macbook Pro?

    finder>preferences>general>uncheck hard disks

  • New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,etc

    New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,switch channel from auto to maybe 6,channel width to 20mhz? Already changed security settings to WPA2.  Currently router is running in mixed b and g mode.

    If you have one computer running on G they will all run on G. All ROUTERS are backward compatible, in otherwords if you have a group of computers and all of them are N compatible and one or two are G They will all work but the N computers will run at N and those that are G will run at G speed not N.
    It can get confusing but really it is simple. The newest is 802.11 AC and ic used with the newest Mac Computers made available in November 2013. So if you have the newest Airport Extreme that is 802.11ac and the newest computers that are AC compliant your speed will be 5 times faster than anything on the market right now.

  • I have two wireless networks that I switch back and forth.  Everytime I switch the network zone my macbook pro hangs and I have to do a hard shutdown and restart.  What is the fix?

    I have two wireless networks that I switch back and forth.  Everytime I switch the network zone my macbook pro hangs and I have to do a hard shutdown and restart.  What is the fix?

    Create two locations in Network, one for one and one for the other.
    WiFi, Internet problems, possible solutions
    WiFi security issues, at home and WiFi hotspots

  • If I have a MacBook Air, can I download digital copies of movies onto another computer that uses the same iTunes account and still get the movies on my MacBook?

    If I have a MacBook Air, can I download digital copies of movies onto another computer that uses the same iTunes account and still get the movies on my MacBook?

    In most countries with a lot of movies yes you can, just like how iCloud works with apps/music

  • I am in the process of updating the os of my macbook pro and have installed from the snow leopard dvd and did the 10.6.8 combo v1.1 as well and wis to update further but i now cannot get preview so i am concerned about going forward. how to get prev

    I am updating the OS on my MacBook Pro from 10.5.8.  I have installed 10.6.8 and the 10.6.8 combo v1.1.  I cannot open my older version of Preview and do not appear to have a newer version which i thought would be on the Snow Leopard dvd.  How can I get the correct version of Preview and is it advisable to upgrade to OS7 andOS8?

    It is always installed with whatever new version of OS X is installed or appropriate updates. Since you plan to go forward your choice depends on your model. I would urge you to perform a clean install instead of continuing the upgrade path which may interject incompatibilities.
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite - System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Yosemite, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Before attempting a clean install you want to first download the appropriate installer application from the App Store. It will download into your Applications folder. You need to make a copy of it in your Downloads folder so you can make a bootable USB flash drive:
    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Use DiskMaker X to put your installer clone onto the USB flash drive.
    Make your own Yosemite flash drive installer using the Yosemite tool:
    You can also create a Yosemite flash drive installer via the Terminal. Yosemite has its own built-in installer maker you use via the Terminal:
    How to Make an OS X Yosemite Boot Installer USB Drive

  • Is is possible to stream a movie through my Macbook pro 15inch onto a TV through my HDMI-DVI chord while also using my computer for other tasks and minimizing my streaming show.

    Is is possible to stream a movie through my macbook pro 15in onto a TV through my HDMI-DVI chord while also using my computer for other tasks and minimizing my streaming show.

    To enable a second display over AirPlay, you first need to be connected to the same network as your Apple TV. Next, open System Preferences > Displays, and select your Apple TV from the “AirPlay Display” drop-down menu.
    Once you do this, your display may flash as the second display connection is acquired, and the Apple TV takes over as the second display. If the displays are mirrored, then you can correct this by opening the “Arrangement” tab in System Preferences > Displays, and ensuring that the “Mirror Displays” checkbox is unchecked.
    In this same “Arrangement” tab, you can move the displays around in the pane to ensure that they're positioned correctly, relative to your physical space (usually side-by-side, or top-down). The primary display here is denoted here by the Menu bar on the display. The arrangement helps with being able to drag windows from one display to the next: if your secondary display is arranged to be to the right of your primary one, for example, you can drag things to it through the right side of your primarcy screen.

  • Can I swap the hard drive from MacBook Pro 17 (2009) to MacBook Pro 15 (2006)?

    My MacBook Pro 17 (2009) died. Pushing the power button gets no response. I had had problems with it for some time turning it on, it usually taking many many tries. Plus when I'd try to do a restart after updating software, instead of doing so it'd shut off super quick with a *pop* sound. There was never any of the typical hard drive going bad sounds I've read about and seen in videos. Since it has refused to turn on I've gone through every suggestion I can find to get it to turn back on. Unhook the battery and try starting from just the power cord; the shorting the power pads move; some thing undoing the battery, counting to 10, and then the next steps now escape my memory, but doing more counting to 10 inbetween; unplugging the battery and leaving it sit for 2 days with no power cord plugged in either, then hook it to a power cord and turn it back on; and so many more.
    Also the symptoms just before this fiasco were as follows: I had a CD in the internal drive and was browsing through the images on it via the handy previewer using the space bar. Then I decided to quite, tried ejecting the CD by dragging the icon to the trash, and nothing. I tried again. The same. Then I pushed on the eject key, with the ejct icon popping up on the screen momentarily, but still nothing. Then it appreared as though some things worked and other things were not working. In my frustration I went to the Apple menu and clicked restart with a wince knowing it was going to take forever to turn back on. It did the usual quickly off with a *pop* and made super short lame attempts to turn back on when using the power button. Of course the CD kept trying to spin for a split second and then the little indicator light on the front would go out, then no noise at all.
    Since I do not believe it is the hard drive (of course I could be wrong not being a Mac nerd at all), I was wondering if I can switch the hard drive to my Macbook Pro 15 (2006)?
    I tried this, but it would not read the hard drive. Just a blank grey screen. If it is possible to do this swap, what are the exact steps to do? Please answer like I'm completely illiterate on this, because I really am. I'm super scared of losing everything on the dead MacBook's hard drive. Yeah yeah, I know: then why have I not been backing things up? I had the week prior. Believe me I WILL be doing it daily from now on if I get this mess straightened out!
    Here are the specs for each MacBook Pro:
    Name: MacBook Pro 17 (info gained from the serial on the bottom and then looked up online)
    Model: A1297
    Model Code: mbp_17_early_09
    CPU Type: Intel Core 2 Duo
    CPU Speed: 2.8GHz
    RAM Type: DDR3 PC8500 SODIMM 1066MHz
    RAM Slots: 2
    Max RAM by Slot: 2 x 4GB
    Maximum RAM: 8GB
    RAM Pairing: Modules may be installed individually
    Hard Drive Connection: SATA 300
    Hard Drive Platter Size: 2.5"
    Device Connectivity: USB 2.0, FireWire 800
    Video Output (base graphics option): Mini DisplayPort
    Expansion Slots: ExpressCard/34
    Max Operating System Version: 10.6.8 (I believe that is what was last on the computer)
    Name:    MacBook Pro 15" (retrieved from the System Profiler on this Mac)
      Model Identifier:    MacBookPro2,2
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.33 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache:    4 MB
      Memory:    3 GB
      Bus Speed:    667 MHz
      Boot ROM Version:    MBP22.00A5.B07
      SMC Version (system):    1.12f5

    OGELTHORPE really sorry to keep bugging you, but it's obvious you know what you are talking about and I'm stuck on thin ice here getting this fixed, because there are no authorized Apple reps here. I would rather shoot myself for messing up, then to trust someone who "says" they can fix my Mac down here.
    I checked out a company owned by ebay that is the same down here, called MercadoLibre. There are quite a few adapters listed there. I'd like to give you links for some and was wondering if you minded taking a look to tell me if any seem to fit the bill. Some have specs in English, others don't. (Google translater is my friend!)
    #1.  http://articulo.mercadolibre.com.uy/MLU-415826915-adaptador-usb-a-ide-y-sata-con -cables-y-fuente-envio-gratis-_JM
    #2. http://articulo.mercadolibre.com.uy/MLU-416270876-usb-20-to-ide-sata-25-35-hard- drive-_JM#D[S:HOME,L:HISTORY,V:1]
    #3.  http://articulo.mercadolibre.com.uy/MLU-416384859-adaptador-usb-20-a-sataide-_JM
    #4.  http://articulo.mercadolibre.com.uy/MLU-415596152-adaptador-usb-20-para-sata-e-i de-manhattan-_JM
    #5.  http://articulo.mercadolibre.com.uy/MLU-416061182-adaptador-de-usb-a-sata-o-ide- 3525-con-fuente-externa-_JM
    #6. http://articulo.mercadolibre.com.uy/MLU-416061069-convertidor-usb-20-a-sata-hdd- 25-soporta-hasta-1tb-_JM
    These are all cost effective enough that I don't care the price - cheap, expensive - whichever will work the BEST!
    I've also looked for the 7200 rpm HDD, and although I found some, I'll be danged if they are not 3.0, instead of the 2.5 that I have. Grrrr! I was willing to spend the $90 for 1tb... or being the non-techie that I am, can this 3.0 go into my 2006 MBP??
    Just so you can see what all is listed right now:
    http://listado.mercadolibre.com.uy/7200-rpm-hdd-2.5-macbook-pro
    Another newbie question: How do I check what the amount if RAM is presently installed in it? (I might be a greenhorn, but I take pride in not being a dumbie and I learn when taught)
    Right now, I'm willing to spend almost anything. I want a few files that are on the HDD at the moment that I was stupid and did not backup on my external. One file I worked on all day due to the dimensions I had to design it at and each effect took a long time to render. I really don't want to do that one again!.. I'm also willing to spend anything that won't cost me the price of a new iMac. Figure that should be the next one I buy that is affordable, but won't be overworked like the MBP was.
    Once again, thanks much for all of your help!

Maybe you are looking for

  • How do I install Lion on a newly erased hard drive?

    I used every trick on the internet including command R and bupkis. After 3 days I repaired the drive using my macpro as a Target and my iMac with Lion to do the repair. Nada. I have erased the drive completely and need to know how to install Lion. My

  • File in use by another user f

    I would like to be able to have a notification, saying "file in use" or "file locked," pop up when user 2 tries to open a word 2010 document that user 1 already has opened and is editing. My documents are on a server. 

  • To find top tables in size to archive a database

    Dear Sir, I have to archive top 20 tables of our production database, for this can anybody please provide me some documents/links so i can accomplish my task. Regards, Mushtaq

  • Formula for report to run with data of only current day

    I need a report that whenever refreshed it run with data for only the current day. It is for knowing how many checks were performed from the start of the current day to the time the report runs. Iu2019ve tried to use the select expert but I guess I n

  • Send values to IN query with parameter

    Subject: send values to IN query with parameter Hello. Hope I'll explain my problem well enough: I have a query: -- select id from table where id in ('100') Now I used parameter for the IN part: -- select id from table where id in (:param) and I gave