Wireless drops randomly

MAC BOOK AIR IS CONNECTION TO WIFI
THEN IMMEDIATELY IT TRIES TO CONNECT AGAIN USING A DIFFERENT  ECNRYPTION TYPE….
WIRELESS ROUTER THINKS ITS UNDER ATTACK AND SHUTS DOWN WIRELESS
ANY SUGGESTIONS? THANK YOU

have you tried moving the hub as far from the pc as possible in case there is interference from the pc/power supply.
have you tried a new filter and if possible a different router - even borrowed just to try it.  it is not impossible that there is a problem with the hub but need to try other things first
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • Solve X200s the wireless radio randomly turned off/discon​nected

    I had exactly an issue on my x200s. The wireless radio randomly turned off, and Window 7 was frozen, no response. It took me a lot of time to figure it out. Eventually, it worked out.
    Please go to "Lenovo access connections", and find the "tools" tab. In the "global setting", uncheck "Allow the wireless lan radio to be turned off when inactive".
    This is going to solve your problem. I worked for me.
    Hope this help.

    FWIW, I think the ThinkVantage software just sucks. On my X200 the wifi would drop constantly, every 3 to 5 minutes.  Driver upgrade, software upgrade, settings etc didnt change anything. I wiped the entire hard drive and installed linux, and I haven't seen a drop since.  Maybe try just using the windows wifi to manage your connections.  It could also be related to the power management dropping the wifi, which would also be the ThinkVantage.

  • Is there a fix for the MBP wireless dropping issue?

    I began to experience the Macbook Pro dropping wireless connectivity on my very 1st Apple in 2008.  At the end of the day my machine was replaced with a new Macbook Pro mid 2010.  It appeared to be working just fine until about 2-3 months ago when I started dropping my wireless printer connection.  I searched the internet hoping for a driver update from HP or something from Apple and each time I found something, the problem still existed.  I even thought that by upgrading to Lion would resolve any issues that I have with my MBP wireless connectivity issue.  After upgrading to buying a new router, new printer and upgrading to Lion; the wireless dropping issue still remains unresolved!  I know there are several hundred in not thousands of people who are having the same problem so what are we supposed to do?
    When my 1st MBP was replaced in 2010 I had to stop working because I was diagnosed with "Failed Back Surgical Syndrome" and was in the process of applying for disability.  Something in the back of my mind said that I needed to purchase Apple Care for this new replacement however I had used all of my savings & retirement to sustain life for me and my family that there was nothing for Apple Care.  If it weren't for my church and family I am not sure what I would do during the 18 months of no income while waiting for a decision only to receive an appeal until I findly stood in front of an Administrative Law Judge who heard my case and granted me disability.  Besides there was no way I could ask anyone for money to purchase a warranty for a top of the line laptop while the country was falling off an economical cliff.
    I broke down and called Apple Support and was told that I qualified for technical assistance regarding the upgrade to Lion a few weeks ago.  The tech on the phone had me run some disk utility tests and had me repair permissions which she said could be the cause of the problem.  I willingly went along with her in hopes that this was indeed the fix.  However, within 10 minutes of hanging up the phone my MBP began to drop it's wireless connection to my new HP printer and also the Internet.  Hence my question above is what I am really looking to have answered!  What is the fix to this problem that so many people are having issues with?  I couldn't afford to purchase Apple Care back in 2010 and I can't afford to purchase a new 2011 machine today if that truly is the fix!
    I will be disabled for the remainder of my life and I have grown dependent upon my computer to stay in touch with friends and colleges from work.  I worked for the IT Group at Wynn Resorts and I can say that the type of service Appple is providing it's customers is not what I learned over the past 25 years with Mr. Wynn.  Why can't Apple get the simple concept that it's customers are it's life line and keeps them in business.  I need help and I don't know what to do nor where to turn.  It would be different if Apple acknowledged the issue and said they were working on it however they aren't.  I plead to Apple to help me fix my notebook so I can stay connected to the outside world vs. couped up inside my home.
    Best Regards,
    Scott Leavitt

    I am simply lookig for some help not an argument.  I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts.  I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another.  As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP.  This MBP was running Leopard when the problems started
    I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue.  I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion.  In Windows 7 I am able to print and scan to my hearts content without any issues.  I am able to browse the internet as much as I want.  I close Fusion and try to connect to my printer via wireless and nothing.
    In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems?  Out of the 1000 + posts is there a consolidation of which answer is the best?  BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
    In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time.  Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. --  Thanks

  • Wireless drop of Macbook Air (mid2012)

    I have Macbook Air 13 inch- (mid 2012) with software OS X 10.8.4 (12E55) , i have problem with wireless connection which it drops always, i tried to install windows update 1.0 for (mid 2013) but it not work & gives me message that it isn't support on my system, so now please tell me what the solution to solve this wireless drop.

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article.  
    Step 2
    If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
    From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
    If the application called "Bluetooth Setup Assistant" is running, quit it.
    Step 4
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Reset the System Management Controller.
    Step 5
    [See related.]

  • [SOLVED] Wireless drops out

    Hey there,
    I have been getting weird problems with my wireless dropping in and out every say 30 secs. I recently did a global update so I am thinking something may have broken.
    I also use wicd to manage my wireless connection. Also there is no problem with the wireless itself as another person using the connection is having no problem at all.
    Anyone got any ideas on the matter?
    Last edited by Rede (2009-12-07 12:14:47)

    Oh wow, is that a coincidence. My thread in this forum that says Samba disconnects my wifi, I use the same wifi driver, and also use Wicd, and when I try to connect to a Samba share, my wifi starts disconnecting and reconnecting every 10-20 seconds. These problems sound related IMO.

  • CPU 100%, Wireless drops, iTunes stutters

    This is driving me crazy. I've noticed that when i run some programs like safari, itunes and msn together of recent my cpu goes crazy to 100%. Wireless drops and itunes stutters like crazy. I'm not doing anything different, the programs haven't changed, syslogd is not affecting it.
    What the **** is going on? A machine of this speed shouldn't be unable to cope with 3 programs. It has only recently been happening ie past 5 days.

    Open Activity Monitor and see if you have a process called "airportd" running. I was experiencing this problem recently and airportd was the culprit. I had to kill the process and the CPU went back to normal. Searching for airportd in these discussions will give you more information.

  • Wireless Drop

    Hello all,
    I've been experiencing problems with the Home Hub 2 Type B lately. When I attempt to stream a radio station for example through wireless, the wireless drops for all wireless devices. This is the same if you try and upload a big file. I then have to restart the router to get wireless working again.
    This seems to happen more when using the wireless 'N' standard but sometimes happens using B or G. Can anyone here help me out?
    Thanks

    jezhodges wrote:
    thanks for the reply,
    I have tried this numerous times and it still 'bricks' itself. Do you think it's a hub problem??
    The Homehub might still have a problem with Packet Fragmentation, check out these links & try searching this Forum using the "Fragmentation" keyword.
    Wireless keeps dropping when transferring files
    Hub drops wireless connections when transferring large files
    Changing the MTU Value or perhaps certain Wifi driver settings might help?
    "I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android)

  • Wireless drop outs: draytek vigor 2600: macbook pro: channel 6

    Hi all
    Thought I'd drop this is, as it may help others??
    I've been having real problems with unstable wireless drop outs, it's been driving me barmy!
    I've been using a draytek vigor 2600 plus, when connected via ethernet, it's brilliant, use wireless and it *****, with drop outs every minute or so, and when it does connect the strength is shocking even though my router is above me, about 6 foot!
    I used www.istumbler.net/ and found that my next door neighbour has his router on channel 6... same as mine, since this I've changed to channel 12 and now signal strength is full (on the airport logo) and haven't had a drop out for hours...
    I'll post again if the status changes, but give it a try if you are having problems similar...
    hope this helps.
    Az

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • Wireless dropping out - a bit disgruntled with BT.

    Hi,
    I had a problem with my BT Home Hub 2. The wireless connection regularly drops out to all the wire;ess devices in the house. (3 x laptops) and there is nothing that seems to be in common when it decides to fail and it doesn't come back online unless I restart the hub.
    The BB connection to the exchange is okay and fast, our BT Vision Youview box has no issues and when the wireless drops I can still connect using a LAN ethernet cable. The hub is plugged into the main socket. 
    inSSIDer shows that the wireless signal disappears when it drops out
    I have a spare non-BT wireless router and that works fine without dropping out but of course BT Vision does not work throgh that. 
    I have changed the filter. The hub is plugged directly into the main socket (I have no extensions) and I have tried different wireless channels. Our small bungalow is isolated and there are two other wireless signals just receivable from my house from an nearby school. One is on channel 1, the other on 11. I use channel 6. When the wireless is working we get a full strength signal throughout the property.
    I contacted BT through chat regarding this issue and they first of all tried to sell me a wireless extender. I said not to bother because my contract is up soon and I'll just swap to either Sky or TalkTalk and I'll get a new hub. This was the reaction:
    "Soumik Majumdar: I have gone ahead and replaced the hub  for you. You were using a hub 2. Now you will be receiving your brand new hub 3  within next 3-4 business working days. Please wait for the hub to reach you."
    Yesterday I received a refurbished Hub 2 not the new Hub 3 they promised. And guess what, it doesn't work as well as the old one. I have had to restart it six times in the last day to get the wireless back, which is worse that the old hub. 
    I guess I'll just changed providers so I get a new hub.
    Thoughts anyone please?
    Thanks,
    Leinorackham

    I believe the HH2 does have a known problem with the wireless becoming problematic through time. I know you have already done this but the best thing is to contact BT and ask them for another replacement and preferably a HH3.  

  • Wireless drops randamly

    my wireless drops when i watch youtube.I will start watching a video and everthing is fine then second or third video kicks me offline.Must reset router.Which is a belkin.Does it no matter what browser i use.Crome,firefox,or safari.Have a ubuntu machine and an xp macine and does not happen with them.Im running snow leopard.Have had this router for a couple years and has never done this before.But had a nother router before this do the same thing so bought the belkin.I read a article that siad that getting a apple router would be better for my mac.Any help please

    Lots of discussion on this under More Like This to the right.

  • Cisco 7960 IP Phone Dropping Random Digits

    We have several 7960's that drop random digits while dialing. You hear th tone but the digits doesn't register on the phone. You end up having to start dialing over again.

    Cisco found bug in software. Ver7 is suppose to take care of it.

  • Why Apple isn't acknowledging the wireless drop out problem on iMacs?

    Hey everyone
    I've been having constant wireless drop out on my iMac while all other computers at home work perfectly.
    I've noticed I am not the only one who is having this problem and it seems to be a software/ upgrade problem that Apple needs to get fixed.
    Anyone knows any progress on this topic?

    Unfortunately you simply can't say that this is a general problem. Or, rather, you can, but you won't be taken seriously. Some of us (me, for example) have several Macs, including several iMacs, and simply do not see your problem with any of them. It may be a problem linked to the specific model. It may be a problem linked to a specific batch. It may be a problem linked to specific 3rd-party software. It may be linked to any of several other mutually incompatible factors. What it definitely is NOT is a general problem.
    Those who have it need to provide further data _to Apple_ using the feedback system so that the actual cause of the problem can be identified and a fixe set up.
    Insisting that it is a general problem when it quite clearly is not will tend to get you ignored.
    Which precise model of iMac are you using? There are several different 24" Intel iMacs; which one is yours? When was it built? Where was it built? (You can tell this by looking at the serial number.) Are you running any 3rd-party haxies? What stuff are you running? Does any of it launch at startup? What make and model wireless router are you connecting to? How are you connecting to it, using 'G' or 'N'? Is your connection encrypted, and if so, using WEP (bad) or WPA (better)? Are you broadcasting SSID? How close are you to the wireless device? Is there something in the way, such as a wall or a floor? What are the walls/floor made of? Are you using other devices which access the same general radio band (you do know that wireless systems are radios, don't you?) such as wireless landline phones, or microwaves, or some cell phones, or baby monitors? Are there other wireless systems in your immediate neighborhood, and what channels are they broadcasting on? What channel is your wireless router broadcasting on?
    Are you beginning to see the number of possible reasons for your problem?

  • HH3 wireless drop outs

    Hi have had Infinity for some 6 months and quite happy would like the NAT loop back in the HH3 but the problem I have now is both my wireless printer and Wii will not keep connected, I have to turn the printer of and back on every time I want to print Not much point having a wireless for the whole house. and the Wii box needs me to log into the HH3 page and to delete the Wii in the network devices so that it can re-connect.
    I read on here that some people have a Type B router is this just a software update or do I need a replacement router???
    I have to say I have had issue since changing from BeThere with the printer as on there router it stayed on line all the time but now it is every time and the Wii box now doing this suggest that it is breaking down.
    One further point when we have more than 4 items on wireless in the house at any one time the wireless drops out lots of time and then takes some time to even show up it is as if the wireless chip is restarting, a wired connection is fine.
    Any advice or help would be great.
    Thanks and Happy New Year to you all.

    If you have tried all you can to improve the wireless connectivity then have a look at THIS THREAD as there are a couple of routes in it you could consider.
    Please Click On any Text in Blue as that automatically links to information.
    PC (NDEGR)

  • WRT54GX2 Drops Wireless at Random

    Standard wireless set up connected to a cable modem, used WPA encryption and MAC Address restrictions on my devices for security, disabled SSID Broadcast, running on Channel 6. Firmware is the most current available from Linksys. The router drops Wireless every 20-30 minutes or so and I have to unplug it and plug it back in. On the verge of returning it to the store, but wanted to see if I was missing something.

    check for any wireless interfence (cordless phone, microwave). try also changing the channel from 6 to 11, 1, 2. and the advance wireless settings : RTS 2304 abd Fragmentation threshold: 2304.

  • T60 Wireless drops out randomly

    Hi,
    We have several Lenovo T60 Thinkpads in our company. Every now and then the wireless disconnects and users are limited to work locally. As we have all our documents on a server that is very annoying to our users.
    As far as I could investigate the problem there is no specific reason linking to when the connection get lost.
    The only indicator is that the little green wireless symbol next to the bluetooth symbol is not activate any more.
    If I check in the hardware device manager the wireless is on. Switiching it to off and again to on does not work. I also deactiviate that Windows might turn the power of to save energy.
    The only solution thats works to bring back the wireless device to run so far is to restart the computer.
    We have a Draytek vigor Router but as other users with different laptops dont face the same problem i would limit it to the T60 series.
    Anyone facing the same problem?Any suggestions?

    have you tried moving the hub as far from the pc as possible in case there is interference from the pc/power supply.
    have you tried a new filter and if possible a different router - even borrowed just to try it.  it is not impossible that there is a problem with the hub but need to try other things first
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for