Wireless / Ethernet not working using Ubuntu Z510

Hey..!
I just got a Lenovo Z510 but im getting troubles.. My Wifi / Ethernet works Perfectly while Using Win 8.1 ... but I recently installed Ubuntu v 14.4.. but neither Wifi/Etho is working..
Do I have to download any driver for Ubuntu? o:
thanks.

Similar Messages

Satellite L300-190 - wireless is not working in Ubuntu 8.10

Hi,
I have recently bought this machine Toshiba Satellite L300-190 (PSLB8E-014008N5).
First I tried to install Ubuntu 7.x but that did not work due to some graphic card issue. Then I try the new version Ubuntu 8.10 , everything is working fine, except of wireless. There is no wireless detection in it.
I tried through Ubuntu forum, but still no luck. Please help me out if u can provide me some proper driver or can guide me as well.
I am waiting for your response.
Ali

Fianally Wireless list have got by using the following driver and instructions for the the laptop Toshiba satellite L300-190...
http://wireless.kernel.org/en/users/Download
as I am using ubuntu 8.10 , so i installed compact driver supported for 2.6.27.
and just untar it...
1.make
2. sudo make install
3. sudo make unload
4. sudo make load.
and restart ur PC, and thats all, hopefully for the next start u can see the wireless connections

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas?

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!

You should probalby contact Netgear

New Problem, Old Issue. Ethernet not Working

You may recall this thread: http://forums.verizon.com/t5/FiOS-Internet/FIOS-Ethernet-not-working-Wireless-works-fine/td-p/203838
If you do, well, I have the same issue once more. It's driving me a bit nuts, to be perfectly honest.
About 10 days ago I finally had a stable ethernet connection on my Desktop machine to the internet. 8 days ago I marked the other thread as solved as it was still working and thought that my problems had been solved. Unfortunately, here I am 10 days later and suddenly, without warning, the ethernet connection on my Desktop loses internet connectivity.
I tried turning the router off and then turning it back on, but none of that worked.
Right now it switches between two different states without little indication as to why it switches between them except that it tends to only do it as a I unplug the cable and then plug it back in. The two states are simply connecting to an "Unidentified Network" which is much the same as the problem I had before, and connecting to an "Unidentified Network" with "Internet Access", except, none of the applications that use internet on the computer actually have Internet access even in this state. The Unidentified Network is the key to knowing I still don't truly have internet access.
Windows Firewall is off. It's actually been off for awhile now because I forgot to turn it back on after I initially shut it off trying to get it to connect before. Windows 7 (64-bit) is up-to-date, so that's not the issue either. But something is at issue here and I'm not sure what it is. Since the Wireless works, and the Desktop downstairs works on the ethernet, I can only assume it's something with this Desktop. But I'm not sure what it is or why it's doing this.
Any help with isolating the problem so I can actually fix it and not wait almost two weeks for it to magically work again would be immensely appreciated. Thank you.

Hello there Viafax and Spacedebris!
Apologies for not responding sooner. I decided to take a look at a Windows 7 support forum to see if the issue was something specific to that. After explaining in detail, I got this post and I followed the steps. I posted the information I got and then tried the duplex thing.
The default setting it seems is "Auto Negotiation" which obviously wasnt working.
I tried 100 Mbps Half Duplex and suddenly I had a connection. I can connect to the internet on my Desktop! So I tried 100 Mbps Full Duplex and.... no connection.
So, right now it's set to Half Duplex. But I don't even understand why it would need to be Half instead of Full, or the benefits or disadvantages to either. Right now it's working, but I wish I understood more.
The 192.168.1.25 may have been a typo, since I set the device to run off a static IP of 192.168.1.125, to my knowledge no device on the network has 192.168.1.25
But other than that brief typo, I do believe the rest of the information is as accurate as I could make it. I typed it as I looked for it, so even if it seems odd, that's what it was.

Ethernet not working on brand new portable

Ethernet not working. This is a new portable.
Troubleshooting message: The realtek PCIe GBE family controller adapter is experiencing driver or hardware related problems.
Reinstalled the driver multiple times .
Reinstalled the portable to factory default.
Only one ethernet controller driver available for this portable on the HP site so i used that one.

Hi:
The only suggestion I can offer would be to try the driver directly from Realtek. Fourth file on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy...
If that fails to do the job, I recommend you either return the PC if you can, or contact HP technical support and submit a support case under the warranty.

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Thunderbolt ethernet not working when computer wake up from sleep.

thunderbolt ethernet not working when computer wake up from sleep.
it will not happen in Mountain loin.

I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
In this case the problem was related to mDNSResponder task which handles all dns queries.
It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
QUESTION: Is your problem independent of the access point / router you connect to.
I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
Software is of poor quality. Not much more to say in this matter.
I found a very interesting article dated 1996 about programming which I think is still valid.
Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
Below the fragment (with some connection to Apple)
Software is everything. It also s***s.
"It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

Ethernet not working with 10.10.1

Just upgraded to 10.10.1 with my iMac. The ethernet port is unavailable. Wireless works. Tried a PRAM reset and deleting the network configuration. Still Ethernet not working. Ideas?

I suggest you ask this in the Yosemite Forum

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Have used large format, but using the 'burn' software, I am not getting seamless video quality on DVD even though I am burning at 2* speed. Any ideas? Do I need better software? Or is there a problem with the SuperDrive?

When i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well

when i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well including chrome browser…i tried everything but no clue...anybody have solution for this..???

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

Tecra A3 - Creative Mouse Wireless does not work

My Creative Mouse Wireless does not work while touchpad is installed.
Even if I disable the Touchpad, the mouse seal does not work.
Does anyone know how to solve this problem?
Thank you,
R.P.

Hello
On this way it is not easy to say what the problem is. I assume that you got some installations software for your external device. Install it and it should works.
As far as I know functionality of external mouse doesn`t depend on touchpad settings.
Bye

My wireless keypad not working even in a full battery, window display continously switching automatically without touching the cursor.

my wireless keypad not working even in full battery

I have a wireless keyboard with the attached keypad. The keyboard is working great, but the keypad quit working. I put in new batteries...did not help. Any suggestions?

U330 Ethernet not working, wireless works fine

I have an Ideapad U330 that will not get online using ethernet in windows. Before you ask, no it isnt my router. When I use an Ubuntu bootable disk, the ethernet works fine and I can surf the web without issue. I reformatted and installed windows 7 x86 (It had windows XP previously and the ethernet didnt work there either), installed all the drivers, and updated the BIOS, the ethernet still does not work while the wireless works fine. I thought this was a hardware issue until the ethernet worked with no issue in Ubuntu.
Solved!
Go to Solution.

Alright well I booted it up in Ubuntu again to get the details, got an IP of 192.168.1.142 and DNS of 192.168.1.1. When connecting through Windows, I get an IP of 192.168.1.198 and DNS of 192.168.1.1. The only difference that it pulled up that was different from Windows' ipconfig /all is that it pulled a slightly different IP.
But, lo and behold, manually putting in the IP pulled from Ubuntu worked. But each time I try to go back to automatic IP in Windows it keeps delegating it to 192.168.1.198. Is there any reason why it keeps doing this? I would imagine that the router could have a setting having that out of an accepted range, but since that's the only IP it'll obtain otherwise, I'm wondering why that is.
I guess all there is left to ask is whether there's a way to keep the IP and DNS as automatic settings rather than manual. This is a college campus and I'd like to make sure that it wouldn't interfere with other computers or locations, including off-campus locations. Any thoughts?

Wireless / Ethernet not working using Ubuntu Z510

Similar Messages

Maybe you are looking for