Wireless-G Model WRT54GS V7 Firmware 7.50.0 - easylink Advisor 1.5.1044

I have a Wireless-G Model WRT54GS V7.50.0 Firmware for easylink Advisor 1.5.1044
Connected to a highspeed connection, and then connected (Hardwired in port 1 of router) to a Dell system running XP SP3.
I bought a new Laptop that is running Windows 7 and the laptop causes the connections to drop when it is powered on.
Then the laptop is always dropping the connection and re-establishing the connection. Is this problem because of windows 7?
If I do not bring the laptop up, i can run the desktop with no problem. Running WPA security mode.
Thanks in advance for any help you can give me.
John

Is your Desktop computer is a Wired or Wireless? Are you facing the problem only on your Windows 7 Computer or on all the wireless computers?
You can try to change the Wireless Settings on your Router and check if that makes any difference...
Login to the setup page of your Router and click on the Wireless tab.... and below change the Wireless Channel to 11-2.462GHz and click on Save settings.... Then click on the Sub tab "Advance Wireless Settings" and below Change the Beacon Interval to 50 .....Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 ....Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

Wireless G model WRT54G VERSION 8

I have Wireless G model WRT54G VERSION 8 and I was wondering is there anyway for me to turn off the wireless part cause I have no use for it right now. I just want to use the wired connections ports to connect my computer and my xbox360.

User's manual, page 9, wireless network mode.

Help with wireless rounter model: WRT54G gaming problem

hi guys, i always have problem using this rounter as people can not connect to my games because the rounter is blocking. so, what can i do to stop this problem?
thanks

get the port numbers from the game provider and forward the same on the router ..
if you don't know how to access the router , click here .. on the web ui , click on the "applications and gaming" tab and go to "port trigerring" subtab and enter the port numbers you have ..

WRT54G and WRT54GS Linksys EasyLink Advisor (LELA) users

If you are experiencing any issues with Linksys EasyLink Advisor (LELA) and the latest firmware on the Linksys.com, you may have to roll back your firmware version. Linksys EasyLink Advisor (LELA) may not function properly with the firmware revisions listed below.
WRT54G
Version 5 - firmware version 1.02.4
Version 6 - firmware version 1.02.4
Version 8 - firmware version 8.00.4
WRT54GS
Version 5 - firmware version 1.52.4
Version 6 - firmware version 1.52.4
Version 7 - firmware version 7.50.4
If you are experiencing issues with LELA and have installed one of the listed firmware files, you will need to roll back your firmware to the previous version. The correct files are listed below and are available for download as an attachement.
WRT54G
Version 5 - firmware version 1.02.2
Version 6 - firmware version 1.02.2
Version 8 - firmware version 8.00.2
WRT54GS
Version 5 - firmware version 1.52.2
Version 6 - firmware version 1.52.2
Version 7 - firmware version 7.50.2
Regards,
Linksys
Message Edited by david on 12-27-2007 05:34 PM
Attachments:
WRT54Gv5v6_v1.02.2_fw.bin ‏1644 KB
WRT54Gv8_v8_00_2_fw.bin ‏1644 KB
WRT54GSv5v6_v1.52.2_fw.bin ‏1644 KB
WRT54GSv7_v7_50_2_fw.bin ‏1644 KB

8.00.4 was available for a short time. I know it caused me a handfull of problems and there was a posted issue with that firmware and LELA.
8.00.4 was removed & replaced with 8.00.2.

Hi, I have a wireless linksys router model WRT54G. what i...

Hi, I have a wireless linksys router model WRT54G. what i want to do it´s configure a network in my home. I have 2 pc´s, a laptop an a desktop. what I should do to be able to share files,music,videos. between both computers? the laptop has Windows Vista, the desktop has Windows XP Professional. could you give me more details? step by step. thank you really much.

its really simple to set up a network, first make sure that all computers are in the same workgroup by right clicking on my computer, then properities, then computer name.
there you can make the setting for the work group
do not use the default one, create your own, do this for each computer.
next thing is to choose any folder that you want to share and right click on it, select sharing, then check the two boxes to share this folder and the other one to allow others to make changes to this folder.
doing this bypasses the trouble od setting up passwords for right now.
you should not have the network up and running with folders being shared with all in that workgroup.
you may want to check the manual for vesta as it may do things a bit differant that xp
you could also run the create a network wizard in the xp system.

Wireless-G Broad band Router Model wrt54g

Just bought a new lap top. I already have to computers at home that I have connected via the wireless router. Have been setup and working fine for years. Was told all I had to do was connect my laptop to the same network. Tried and it finds the linksyshome network but then asks me for a password or security phrase which I have no idea what it is. I tried using admin and it connects to the network but states I do not have inernet access with this connect because of security phrase. Is there anyway I can reset my security phrase to something I remember? Please answer in laymans terms because I dont understand alot about this whole process.

You must get into the settings of the router. If you have not set up a password for the router you can get into it by using the default password. First connect to the router with a wire. Once wired to the router then type in 192.168.1.1 into your web browser and it will prompt you for a user name and password. The default is blank for the username and admin for the password. Once in the web browser go to the wireless tab and security and setup the passphrase. Once you install the passphrase you can then logon to you network.
If you are unable to get into your router with the default password and you cant remember the password you put in at setup, then you can push the reset button for 30 seconds on the back of the router. Reboot, and this will restore everything to default. You will then have to repeat steps above and reset security, ssid and mac filtering.
Linksys WRT54G v3.1 (DD-WRT v23 SP2 09/15/06 std)
Linksys WRT54G v2 (Firmware Version: v2.04.4)

No wireless connection on WRT54GS

The wireless connection on my WRT54GS (v6, firmware 1.50.9) seems to have died. The WLAN light still comes on, but neither the downstairs PC nor my PSP can locate the network, even though the router is set to broadcast the SSID. Rebooting makes no difference. Cabled connections (PC and PS3) still work perfectly well. No settings have been changed on any of the equipment, so I suspect that something has gone wrong internally. The router is just about within its warranty period, so is there anything I can try - any diagnostic software, for example - or should I just get it replaced?

You can try to update the firmware of the router, to check if that stops connection dropping. To update the firmware of router try this: 1. Go to www.linksys.com/download and select correct model number and version number. Download the firmware and save it on your computer. 2. Check the file it sould be firmware image file like .bin etc. If it is a compressed zip file extract it to get firmware image file. 3. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. 4. Go to administartion tab there 5. Go to fimware update sub-tab there 6. Browse for the firmware image file and click update 7. when update completes turn off modem & router. 8. After 2 minutes turn on modem and after 2 more minutes turn on router. To get network key, connect your computer to one of the four ports on router using ethernet cable. 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier 2. Go to wireless tab. 3. Go to wireless security sub-tab 4. If security mode is wpa or wpa2 note down passphrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key Well you need to input all the wireless settings of your wireless network on Wii. To get these settings: 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. 2. Goto wireless tab. Here you will get the wireless network name/SSID. Here make sure wireless SSID broadcast is enabled. 3. Now goto wireless security sub-tab and here you will get the security mode and the security key. If security type is WPA note passphrase/shared key, and if its WEP note down wep encryption level and key 1 from listed 4 keys....& it will definately work!!!

Model WRT54GS Wired Connection

Model WRT54GS but i have my xbox 360 connected to it by a ethernet cable. i also set the port range and set a IP manually to the 360. I'm still getting strict Nat. Also, i have DSL Internet and i set the port range and firewall to the 360 IP on the DSL Modem. Wen I made the port range settings it was saying open Nat,A Day later it goes back to strict. i rechecked the port range settings and they are still set. I also have a PS3 connected wireless to the router, i set the port range for it as well. I've had no problems with the ps3 only the 360. Made sure IP are different. Help?

Ya i forgot to mention I put the DMZ to the PS3 and it makes it Type 2 NAT but wen i take it off the PS3 it goes to Type 3(type 2-router connection open NAT Type 3-Router Connection Strict NAT). But when i put it to the 360 it still says Strict NAT. I have the IP addresses= PS3(192.168.1.15) 360(192.168.1.115). After reading your post I updated the Firmware but has not fixed problem yet
Message Edited by JBrody89 on 02-02-2008 11:53 AM

Problem setting up model WRT54G

I am having difficulty in setting up my Wireless -G Broadband router model #WRT54G. I Have Comcast High-Speed Cable Internet. My internet connection times out after a few minutes and my connection is lost after a successful configuration of the router.

Try MAC address cloning, and see if this corrects your problem.

WRT54G V8 firmware upgrade, easylink issue

I was having the typical dropped connection issues that these routers seem to be famous for (WRT54G). The easylink application was installed and working. I upgraded firmware to the newly released 8.00.4. After the firmware upgrade the easylink app. still worked for all functions except for setting wireless security. For that, any changes had to be input manually through the web based utility or whatever it is called (inputting 162.198.1.1) in the adress bar.
I had a software conflict and had to uninstall the Easylink advisor software and then reinstall it. After reinstalling, the easylink will not recognize the router at all. Message states something to the effect that the router is either an old Linksys not supported by easylink or another brand. I know this has to be because the easylink has not been updated to work with the new version of the firmware.
Is there any way to get the Easylink advisor to recognize the router with the new firmware?
Or, is there a link to the previous firmware version so that I can flash the router with the previous version? Then I could get the easylink to recognize the router again and will only lose security access after I re-flash with the new firmware.
Or, is there anything else I can do to get the easylink advisor software to recognize the Router with the new Firmware installed?
Thanks

The Easy Link firmware should connects using the new firmware ....
Reset the router for few seconds ,.......After reset disable all firewall & run Easy link tool .....
It will work .....

How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode.

How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode. Where can I find this, or is there a general number I can use?

Hello, and welcome to Apple Support Communities!
Try entering four zeroes.

How do I set up a Apple TC with a Verizon FIOS wireless modem model Actiontec 424wi F series. Does the wifi in the modem have to be shut off and will it effect the FIOS tv?

How do I set up an Apple TC with a Verizon FIOS wireless modem model MI424wr F. Does the wifi have to be turned off in the modem and then bridge it to the TC? Will FIOS tv be effected?

Your first call should be to Verizon support to ask them if you turn off the wireless on the Actiontec router....will it affect any of the features/functions of the FIOS system?
If yes, then it would be best to leave the Actiontec router "as is" and connect the Time Capsule using Ethernet in Bridge Mode as a back up device only (wireless is turned off on the Time Capsule).
If you want to use the dual band (and likely much faster) wireless capability of the Time Capsule, then you should turn off the wireless on the Actiontec device to help prevent wireless interference effects that will likely occur when two wireless routers are in close proximity to each other.
Again, the Time Capsule would be connected to the Actiontec router using an Ethernet connection from one of the LAN <-> ports on the Actiontec router to the WAN port (circle icon) on the Time Capsule. Configure the Time Capsule in Bridge Mode as well in this type of configuration.
Bottom line....what Verizon says will pretty much dictate how you can set up the TIme Capsule.

HT4356 I was gifted a new Samsung wireless printer model ML-2165W, it works with my desk top and lap top but can't get it to work with IPad. Did I just receive a "boat anchor" printer in the eyes of Apple?

I was recently gifted a new Samsung wireless printer Model # ML-2165W and while it works fine with all my computers, I can't make it print from my IPAD. Was I given a "boat anchor" in the eyes of Apple?

It looks like your printer isn't on the list of air print enabled printers. It'll still work, you just need to do some tweaking.
You can see if samsung has any apps to enable printing.
or
You can look into a third party app like Print n Share or Print Central.
Then you can print from your iPad.

HELP I have a wireless Linksys router WRT54G connected th...

HELP I have a wireless Linksys router WRT54G connected through my cable company broadband modem on a Mac. I have another computer to which I installed wireless capability because it didn't come with it. This required attching some piece of equipment to the back of the PC which enabled it to get on the internet without another cable modem. My question is this. If I get an iphone or a laptop(with built in wireless ability) will I automatically be able to go on the web because of the router on the Mac.

yes certainly... if you get any wireless device in network that would certainly connects to a wireless n/w of router...

TS3048 Genuine Apple Bluetooth Wireless keyboard - Model A1016

I was given an iMac M6498, wireless keyboard Model A1016 and wireless mouse. The first time I plugged the iMac, the keyboard worked perfectly and the sencond time, it stopped working and it is not recognised. I have changed the batteries and still it's not working.

They should work. You do not say if your problem is with the mouse, the keyboard or both. Is there a green power light showing and is it flickering?
Here are some Apple comments on the mouse.
http://support.apple.com/kb/HT4112
It may require re-pairing. For that, go to Systems Prefs > Bluetooth.

Wireless-G Model WRT54GS V7 Firmware 7.50.0 - easylink Advisor 1.5.1044

Similar Messages

Maybe you are looking for