Wireless-G Router and Windows Vista

I recently upgraded from a wireless-B to a wireless-G router. After setup, we configured all of the PC's in the house to the new security network password and all was good. Our home PC's run Windows XP. I then configured our laptop to the router with the new password and settings and all was good with it. THe laptop runs Vista.
THe problem is with the laptop. Everytime we turn on the laptop to use it, we have to change the password from the old password to the new one. It will not save the new WEP password!! It always reverts back to the old password that was configured with the wireless-B router once the computer shuts down! HELP ! ! ! !

yes contact your laptop manufacturer to update the drivers for the buil-in gateway adapter...will definately work then.

Similar Messages

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

I have been using WRT54G wireless broadband router and WU...

I have been using WRT54G wireless broadband router and WUSB54G on my home PC for the last 2 years. It was working fine until recently I encountered serious connection problem.
The WUSB54G cannot connect with WRT54G.
Error message " Cannot assocaite with the access point.
I have checked the followings to try and solve the problem.
1) Refresh site survey the WUSB54G does not show my SSID, but it can show my neighbour'sSSID.
3) When I use my notebook with built-in wireless network adaptor to access wirelss broadband there is no problem at all. I can access my SSID.
4) I have try reseting the WRT54G and changing password but still can not solve the problem.
5) Uninstall and re-install
5) I have installed a new USB adapter (WUSB54GG) thinking that it could be the old WUSB54G is faulty. But still encounter same problem.
I am using Window XP Professional. What could be the problem?
Please provide your professional advice. Thank you.

Hi, Try to update firmware of router. You can get latest version from www.linksys.com/download, Hope it will help you

Incompatibility among the authentication WEB-based and Windows Vista

I have a Wireless LAN Controller 5.0.148.2 and Access Points 1252 and 1231; the customer have 8 laptops with Windows Vista that they present problems when to get connected to the Guest's WLAN; these same ones do not present problems when they authenticate to Employee's WLAN through PEAP. The laptops with Windows XP do not present this problem.
The users that are connected to the Guest's WLAN then they obtain correctly the direction IP through DHCP; the Guest's users can not visualize the page find salutatory Web or when sometimes they visualize it, they introduce the username and password and next do not visualize the page accordingly, and they do not connect to the Internet.
Them laptops in mention come from different manufacturers ( HP and DELL ), Windows Vista's versions ( Home Basic and Home Premium ) and wireless cards ( INTEL and ATHEROS ).

I'm having the same problem with our student wireless. It uses web authentication and Windows Vista and Mac users are having problems but Windows XP works fine. They all get IP addresses but aren't getting presented with the login page.

Officejet 6110 and Windows Vista lost communication

I have used this printer with this computer for years. It is an HP Officejet 6110 and Windows Vista. No problems and prints all the time using the built in driver that came with Vista. We powered the computer and the printer down. Moved them to the other wall, 6 feet. Plugged them back in, excatly, all same ports and cords, and when you print the spooler shows "Print - Error". Only message and no more details. Thought maybe cable for printer bad but tried one form a different computer and same thing. Uninstalled printer and when rebooted Windows did not see it to Auto install. Told Windows to search for new hardware and it found nothing. Turned printer off and tried reboot and still nothing. Tried manually adding and choosing old port, and nothing. Looked all over web and did not see solution. Went in to safe mode and printer not listed. Where can we go to completely remove printer so Windows will find new hardware and reinstall properly?

Hi RFG1022,
Thanks for getting back to me with the printer information. Much appreciated.
What I would like to do is go step by step through a series of troubleshooting steps with you.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
The next step would be to remove the usb cable from the printer and from the computer and leave it disconnected until further notice.
Please click on the following link for Uninstalling the Printer Software.
Once the uninstall is complete, reboot the computer so the changes take affect.
When the computer is back up and running, disable any firewalls or anti virus protection you may have running so that we don't have any conflicts with the reinstall.
The next link is for the HP Officejet 4630 e-All-in-One Printer series Full Feature Software and Drivers.
Save the file the desktop so that it creates its own icon. Double click the new icon and follow the instructions. The install will prompt you as to when to connect the usb cable or wireless option so please do not connect the usb until asked to do so.
If you have any other questions, please let me know.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Is there a fix for the incompatibility between itunes and Windows Vista?

I'm having a problem with itunes and Windows Vista. When I download itunes it disables my dvd drive. I have found a fix for that by deleting some registry items, but when I do that itunes is disabled. Does anyone know of a solution to this problem?

Hey Don,
What exactly happens after you install iTunes? Do you see an error message?
This article describes device filter issues that can be caused by application conflicts:
http://docs.info.apple.com/article.html?artnum=305422
Jason

Is Magic Mouse compatible with PC and Windows Vista

Hello to everyone, I'm a new member of this forum, I hope someone will help me, please.
I'm taking a look at the latest beautiful Apple's product and I felt in love with Magic Mouse, I'd like to have it for ma PC (not a Mac) with OS Vista.
Is there anyboby who knows if this mouse is compatible with a Pc and Windows Vista OS?
Actually I don't have bluetooth thecnology on my pc but if Magic Mouse were compatible I'd buy an usb adaptor.
Thanks to everyone will help e!

I asked a similar question a few hours back and no answers yet. I think nobody knows since nobody has had the chance to test them. If previous releases are any indication, you'll probably get basic functionality because it is bluetooth, but for the advanced features or setting options you'll have to wait for a Windows driver, which can sometimes take a few months or more.
My thread: http://discussions.apple.com/thread.jspa?threadID=2205313

Ipod nano first generation and windows vista

I finally got everything to work right with Itunes and Windows Vista except one minor problem.
On my ipod, the blue "dot" does not show up when a podcast is new, so in a long lists of podcasts, I can't tell which ones I already listened to.
Is there a way to fix this?
Thank you, Debra

I have a new ipod nano and can not download iTunes to Winnows Vista.
Need all the help that i can get. Thanks,
Capt g

Fieldpoint Hardware Drivers that are compatible with LV 8.5 and Windows Vista

I trying to develop in LabVIEW for some Fieldpoint hardware. I was going to download the hardware drivers from NI, but only see drivers that are compatible with Windows XP and LV 8.2
Or, am I just misinterpreting this?
Also, are there any potential conflicts with me developing on Vista, if my end-user, is uding another OS?
Daddy-O
One should welcome adversity as an opportunity to excel.

Hi Daddy-O,
Thank you for contacting National Instruments. This is a little misleading, and unfortunately the driver you are looking for is currently not directly searchable. In order to use your FieldPoint hardware with LabVIEW 8.5 and Windows Vista, you will need the FieldPoint 6.0 driver. This can be found within the disk that is distributed with new FieldPoint hardware, and any Device Drivers CD from August 2007 forward. Unfortunately, a standalone installer is not available for this driver, and if you do not have a hard copy of the Device Drivers, you can download this here. From this installer, you should be able to select FieldPoint 6.0 and install this software.
I hope this helps! Let me know if there is anything else I can clarify. Have a great day!
Jason W.
National Instruments
Applications Engineer

I set up a playlist in itunes and when i tried to sync it to my iphone i get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occured. Using itunes 10.5.2.11 and Windows Vista 64

I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred. Using itunes 10.5.2.11 and Windows Vista 64. Any help? Thanks in advance!

I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!

Share filing between Mac and Windows Vista

Hello,
I am trying to file share my iBook and Vista.
On my I book under Finder >>>Network>> I see my computer name "Computer-PC" but the icon is grayed out.
When I click on it it says:
The Alias "Computer-PC" Could not opened, because the original item cannot be found. Then it gives me 3 choices
Delete Alias, Fix Alias , OK
I hit OK it does nothing
I hit Fix Alias, Then it ask me to choose an item to open. I dont know what to open????
I do not want to Delete Alias.
Also I tried to connect Vista and it does see the IBook on the network, but then when I try to connect It asks for the user name and password of my iBook
I verified this by reading the support docs on the Apple website.
System Preference >>>Systems >>>Accounts >> verified and changed password.
Still no luck. Can someone give me some advice? Thanks!!

There are more than a few threads on the topic across the web; so I guess a search
would be in order and some sorting of results to enable a wise choice from them.
There's also the Apple Help built into OS X and some ideas present themselves.
Firewall changes would probably be necessary, and the Sharing (system preference)
panel has some access settings for some of this sort of thing.
(The closest I have been to sharing between a Windows machine and a Mac, is when
I let a few Windows machines mistakenly given to me to troubleshoot & repair, were
brought into my space and they temporarily shared a workbench. I found out what
was wrong with them (outside of the poor quality & shabby OS) -- and out they went!)
•Networking Mac OS X and Windows Vista - google search
http://www.google.com/search?hl=en&q=NetworkingMac+OS+X+and+WindowsVista&btnG=Search
•File Sharing between Mac OS X and Vista - google search
http://www.google.com/search?hl=en&q=FileSharing+between+Mac+OS+X+and+Vista&btnG=GoogleSearch
•Networking Windows Vista and Mac OS X - google search
http://www.google.com/search?hl=en&q=NetworkingWindows+Vista+and+Mac+OSX&btnG=Search
•File Sharing between Windows Vista and Mac OS X
http://www.google.com/search?hl=en&q=FileSharing+between+Windows+Vista+and+Mac+OS+X&btnG=GoogleSearch
edited.

HotSynch Connection gets lost between TE2 and Windows Vista

I'm trying to hotsync (by bluetooth) between my Tungsten E2 and Windows Vista. I got them speaking to each other, but the hotsync starts and never gets past the Calendar. The laptop looks like it's still running, but the TE2 hotsynch log says the connection was lost.
Is there a way to keep them connected long enough to sync?
The TE2 is running Palm OS Garnet v. 5.4.7 and HotSync v. 5.0P
The laptop is running Windows Vista 7 64 bit, HotSync Manager 7.0.2 and Palm Desktop 6.2.2.
Thanks!
Post relates to: Tungsten E2

Oh, yeah, one more thing..the hotsync works fine by USB cable on the desktop PC running Windows XP, so I don't think there's any corrupted databases on the TE2 (because if there was, then the USB cable hotsync wouldn't work)

I'm using photoshop elements 2.0 and window vista. when i want to crop i cannot enter any values in

I'm using photoshop elements 2.0 and window vista. when i want to crop i cannot enter any values in the width and height boxes. the cursor won't enter. same thing with resolution. what did i do? what's wrong?

The first thing you might try is resetting the Crop Tool by right clicking on the crop icon in the tool options bar and choosing Reset Tool.
If that doesn't work then the next thing is to reset the photoshop elements 2 settings file by holding down
the Shift+Ctrl+Alt keys just after clicking or double clicking on the pse 2 shortcut.
Keep holding the keys until a dialog appears ask if you want to delete the photoshop elements settings file
and click yes in the dialog.

Is there an external hard disc that will work with Mac OS10.4.11 and Windows Vista?

Is there an external hard disc that will work with both Mac (OS10.4.11) and Windows (Vista)?

For NTFS on Mac, there are both open-source and commercial solutions. See:
http://www.macupdate.com/find/mac/NTFS
For HFS+ Drivers for Windows, there is only one:
http://www.mediafour.com/products/macdrive
Regards.

Is Firefox 4.0 now compatible with ZoneAlarm Browser 1.5.260.0 and Windows Vista Home Premium, 64Bit System, Service Pack 2?

Is Firefox 4.0 now compatible with ZoneAlarm Browser 1.5.260.0 and Windows Vista Home Premium, 64Bit System, Service Pack 2? Earlier when checking for updates there were compatibility issues. Were these issues resolved to allow me secure operation with Firefox 4.0?

I also am a zone alarm user and was not to happy about the issue with 4.0
I use sky .fm for music and was not happy when it would not play. required update to latest flash,which didn't work no matter what. even the suggestion in another thread.

Wireless-G Router and Windows Vista

Similar Messages

Maybe you are looking for