!!!!!!!Wireless Headphones SL3100 HELP!!!!!!!!!!!!!!

ok so i just got The Creative Wireless Headphones SL300, and i immediately started charging them when i got them. the manual says it takes 3 hours to fully charge but i charged it only for 2 cuz i was in a hurry and wanted to try them out. so i took them to school and they worked great. they connected wirelessly no problem, they were exactly what i expect. when i got home i started testing different stuff out like how far it can reach and how long it takes to connect and other stuff...i turned them off to go take a shower and i know the battery wasnt dead cuz the light wasnt flashing and the manueal says the light will flash when its dying. so i turn them off, go shower, and when i come back and turn them on, they dont turn on!!! i figured the battery is just dead. so i let it charge over night and turn it on in the morning, but nope, they dont turn on! i flick the switch and nothing happens! no red light, no sound, nothing! pleas help....i dunno if did something or if im just stupid and not realizing something. but they wont turn on and i know the battery is charged! that wasnt the first time i turned them off either, i was turning them on and off in school too and there werent any problems..
please help!!

Hi,has anyone found a solution to that problem yet? I've been experiencing exactly the same problem. Please let me know if someone could solve that problem.

Similar Messages

  • Wireless headphones SL3100

    I am sure these headphones the Wireless SL3100 are antique, but I have never been able to pair them up I have the CreativeGigaworks G550W Speaker system and I have done all the things the manual says to do. Can anybody tell me what I am doing wrong? Is it the speaker system or the headphones why wont they pair up? Also can anybody tell me where I can find a new chord that is for these headphones? Thanks.

    Hi,has anyone found a solution to that problem yet? I've been experiencing exactly the same problem. Please let me know if someone could solve that problem.

  • Iv upgraded to ios 6 on my iphone 4 and surprise surprise i can now no longer listen to music on my wireless headphones through bluetooth as it now jumps and loses signal just a metre or two away and especially if my hand is covering the top of the phone

    Iv upgraded to ios 6 on my iphone4 and i can no longer listen to my bluetooth wireless headphones as the signal is now that poor it must be deemed in heaven cuz it no longer alive and kicking, i am not happy about this in the slightest infact its a ....... Liberty!! Iv spent lots of money on itunes for music and audiobooks and now i cant listen to them!!! Its definately not thr headphones the signal was fine with no problems at all before i updAted and now its a mockery.. Itsnot my headphones i have two sets still in the box tht i tested and its the same with them so sort it out apple

    Okay, so I think I managed to fix this issue.  For anyone having the same problem, I learned that you don't have to have the same Apple ID for iTunes as you do for the other things on the phone---I didn't realize there were separate logins.  Helpful.
    So I created an ID for my husband's phone.  I logged into iCloud and FaceTime with that account.  After doing so, the settings in Messages actually changed to look more like the ones I was seeing on my phone.  So I then logged into iMessage with his new account (that option to log in was not even showing before!).
    The Apple ID for iTunes is still appearing as the shared one, so we can hopefully still have joint use of our purchased items.
    We shall see if it works when it comes time to receive a message or download an already purchased app, but it's looking promising

  • Connecting wireless headphones to tablet

    Please can someone help me! I got a new pair of Bluetooth/wireless headphones as a gift and was unable to successfully connect them to my device. It says its connected, I can play and pause a song through the headphones, but there is no sound. I know they are not broken because I was able to get them working with an android tablet. I called the headphone company, they walked me through the steps on how to connect them, and sill no luck. They are Jam Fusion headphones, model #HX-HP610 and my lenovo tablet model # A2107A-H. If someone could help, that would be great! Thanks!

    bpsls6 wrote:
    I am trying to connect Sony MDR_IF240RK wireless headphones to my chs435hdc set top box.  No trouble connecting to chs335hdc set top box works fine, but when connected to chs435hdc set top box no sound just humming.  Would appreciate any help  to get these headphones connected. Thank in advance
    Make sure the base unit is in the open.  Those headphones rely on line of sight to operate. 

  • Wireless headphones? A2DP??

    When is the iPhone firmware going to enable A2DP? I love watching TV episodes purchased on iTunes while working out, but some types of cardio make having wired headphones a huge problem.
    I'd really like to wait a few months and get a firmware update, then buy bluetooth wireless headphones for less than $100, than go out now and pay almost twice that for iMuffs.
    Is anyone here using wireless headphones with their iPhone? What do you have?

    well, i can't help you in the headphones department. but i know a handful are solving the A2DP issue with this:
    http://www.amazon.com/exec/obidos/tg/detail/-/B000XRW09Y/ref=ordcartshr?%5Fencoding=UTF8&m=ATVPDKIKX0DER&v=glance
    and i know it doesnt say its compatible with iphone, but if you check out the reviews, a lot of them are using it with iphone without issues.

  • What wireless headphones are best for use with ipad2?thanks

    I  am a computer newbie?!!! I had not owned a computer device of any any sort.( I know in this day and age) and I received an iPad 2 as a gift. I think my friends were tired of me asking to use their computer to receive e mail ,etc. Any way, questions galore!!! I do not even have an Internet connection in my house!! I have Dish TV and a cellular phone. NO land line . Which company is best ? Verizon ( I don't get FIOS)Optimum or?  I am overwhelmed with claims of faster speeds etc. I know I have to buy a wireless ROUTER. Which is best.  ALSO which WIRELESS HEADPHONES  for when I go to the gym? Thanks for your help!!!!

    Wireless headsets, in my opinion, never work as well as I would like. Motorola makes some designed for athletic use. I'd check reviews on Amazon. You're really going to take an iPad to the gym?!?

  • Wireless headphones don't work properly

    I am not getting any sound from the left side of my plug in headphones so I recently purchased a new wireless headphone and I am getting the same problem so I know it's not my headphone it has something to do with my phone setting can anyone help me ?..thank you

    You must verify under System Preferences/Sound that the L/R slider is centered for the Output, for external output (headphones plugged in).

  • Wireless headphones for my Toshiba 22LV505

    I am trying to hook up wireless headphones for my 90-year-old father to his Toshiba 22LV505.  He is extremely hard of hearing but my mom is not.  Can you tell me what device(s) I need to get and how I can hook up his wireless headphones so that he can hear the TV through them and my mom can watch and listen to the TV (without headphones) at the same time?  I am technically challenged so please make your response as low-tech as you can.  Thanks for your help.

    spelling error....."comfort"
    Message was edited by: Liv4Jesus

  • HT202042 I am using Sony wireless headphones. I can pause playback or skip to next song using controls on headphones but unable to get any sound.

    My operating system is Windows 8.1. I am using Sony wireless headphones. When playing songs in itunes I can pause playback or skip song but am unable to get any sound. I know the volume is ok and connection is ok. I have tried complete uninstall and re install with no solution. Any help will be deeply appreciated. Blues43

    Why are you posting in an Apple forum? Ask Microsoft or Sony.
    Barry

  • Suggestions for wireless headphones

    Hi everybody,
    I need a little advice here if anyone can help.
    I sit in an open office, working merrily away on my iMac, but would like to listen to iTunes without disrupting the rest of the office.
    I have some earphones that I can plug in to the back of the iMac but the cable get's in the way when it trails across the desk, so can anyone suggest any good wireless headphones that will work with a 24" Intel iMac?
    Thanks in advance.
    Simon

    80-150 $$$ .... Dont buy wireless. For that money you can buy very very good normal headphones. If you want my personal, and best headphones : http://www.sennheiser.com/sennheiser/homeen.nsf/root/privateheadphones

  • Unable to pair beats wireless headphones

    I am unable to pair my beats studio wireless headphones with my iPad.... The iPhone pairing went well.

    Hi there colleen04,
    You may find the troubleshooting steps in the articles below helpful.
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/ht1664
    -Griff W. 

  • Toshiba TV/DVD combo 32SLV411U - listening through wireless headphones?

    I hope I am posting this in the right place. I couldn't find a specific board just for tvs?
    I have recently purchased a Toshiba TV/DVD combo 32SLV411U. I really like it but have an issue.
    The best way to go about this I guess is to tell you what I hope to be able to do.
    First, I will say I did call Toshiba tech support and they said it couldn't be done and advised I buy a sound bar.
    I am not 100% convinced they fully understood or that a sound bar would solve the problem.
    The tv model I have does not seem to have a separate headphone jack. I does obviously have the rear hookups for the rca type cables.
    While watching a DVD (unhooked from cable box, in DVD mode) I want to be able to have the tv totally silent.
    I live in an apartment complex and don't wish to disturb neighbors. I want the audio from the DVD to come through to the wireless headphones only. This does work when the TV is hooked up to the cable as the sound comes through the cable box.
    It seems to me I should just be able to attach the rca audio cables to the back of the TV and listen as I have described above. But I can't get it to work no matter what configuration I have tried. I don't know if I just need to set things up differently or what. When I go to menu and look at the options, it doesn't seem to give me many choices in that area, unless I am looking in the wrong place.
    Can this be done without me buying anything extra? If so, how do I set it up to do this correctly when watching a DVD?
    If I do need to buy something else, how does a sound bar work and would it solve the problem?
    Or should I look for a stand alone DVD player with audio hookups in back (that kinda defeats the purpose of
    having a TV/DVD combo but might be a less expensive option.
    I guess I should've taken a second look at the features before purchasing the TV combo. I just assumed that with the audio hookups in back it would work. I had no problems with the previous TV/DVD combo I owned, but it did have a headphone port. In the meantime, I am watching DVD's on my PC.
    Any information or advice is truly appreciated. Thanks in advance.

    > I hope I am posting this in the right place. I couldn't find a specific board just for tvs?
    You could not find a right board because this is a Toshiba computer systems user to user forum.
    However maybe I could help you:
    > While watching a DVD (unhooked from cable box, in DVD mode) I want to be able to have the tv totally silent.
    I live in an apartment complex and don't wish to disturb neighbors. I want the audio from the DVD to come through to the wireless headphones only. This does work when the TV is hooked up to the cable as the sound comes through the cable box.
    In my case I connected my HiFi directly to the DVD player using RCA cables (red/white chinch).
    Furthermore the DVD player is connected to the TV via HDMI.
    I can disable the sound on TV and can listen to the sound coming from the HiFi speakers.
    If you want to use headphones, then connect this to the HiFi and this should help you :)

  • PS3 Wireless Headphone

    About a month ago I purchased two PS3 Wireless headphones (USB). Is there a way for both to work at the same time? The head phones are great just need a litte help.

    Hello,
    Welcome to the User Discussion Forums.
    The forums here do not support PlayStation as they have their own Dedicated Forums, In fact there is a sub category just for the PS3 and its accessories:
    http://community.us.playstation.com/com ... ns&start=0
    Just to help you out, there is a thread at the PlayStation website about your headphones,
    please visit here to review it:
    http://community.us.playstation.com/mes ... 0#36446170
    Join the official PlayStation Community Forums to talk about PSN, PS3™, PSP® and NGP systems & games & get help, tips & news. Join PlayStation discussions in the PlayStation Forum:
    http://community.us.playstation.com

  • Wireless Headphones

    Hello guys,
    your help would be appreciated!!
    Having bought the 865 PE Neo2 FIS2R M/B I also bought a pair of Thomson WHP 540 wireless headphones in order not to trouble everyone at home while playing games.
    So I hooked up everything on the PC and had the following problem: the wireless headphones play only momentarily and then stop producing any sound. If I disconect them from the sound port the sound will be coming back but only for a couple of minutes.
    Thinking the headphones were broke, I tried to connect them to my TV and performed ok.
    I connected a set of speakers on the PC which also worked fine.
    From then on I tried every available port and every available combination that C-Media 3D Audio configuration allowed (Headphones-2 speakers - 4 speakers - 6 speakers) but with no success. Also I have checked, downloaded and installed latest drivers from MSI and C-Media, also no success.
    Any help would be appreciated. Sorry for the english applied on this text.

    AFAIK, most wireless headphones have these "battery saving" functions in which if there is no audio signal (or input signal is too weak) for some time, the transmitter and/or the receiver goes "offline".
    If the transmitter powers off before the receiver, you may end up with static or noise. This could be affecting your wireless system.

  • I'm using beats by dre wireless headphones

    hi there i'm using beats by dre wireless headphones, but i have a delay on the audio when watching videos, can anyone help me solve this?

    don't believe it's a beats issue but a general bluetooth headset issue nor is it a iphone or ios issue but all devices could suffer from computer to smartphone
    it's impossible for the iphone to know what proccesing the bluetooth headset does to the music at what
    delay that would cause
    and the head set don't even know that there is any image it need to sync with
    so apple could not fix it in their end
    and the headset maker can't really fix it in their end
    apart from not trying to improve and filter noise and the likes from the audio
    because that is what takes the time that cause the delay
    so maybe the solution is using the cheapests worst sounding bluetooth headset you can find
    as it would not cause a delay by trying to proccess the audio

Maybe you are looking for

  • VA05 - Status is showing wrongly- instead of 'C" it is showing as "A"

    Dear All, This is regarding with VA05 List of Sales Orders: In this report we have one field   "Status" where we got options such as A = Not yet processed B = Partially Processed c = Completly Processed. We got number of Sales Orders completed Invoic

  • Integration with JDE using NER with new 8.97 release

    Has anyone tried integrating SOASuite with E1-NER, new tools release 8.97 where business functions are exposed are web services ? I am planning to do that, so wanted to understand if it can be done and any gotchas .. appreciate your help - thanks Sha

  • Install EPMA in Arabic language

    My client want to see the Oracle EPMA screen in arabic language. Is it possible to view both English and Arabic view if i install and configure in Arabic language. Please reply if any one used this language feature in EPMA 11.1.2.2 version

  • Recruiting Requisition: Status Overview iview not refreshed

    Hi When new E-recruitment requisitions are created its not getting updated in the iview - Recruiting Requisition: Status Overview. Its getting updated after many hours only. Can anyone provide the solution for refreshing the iview with the latest req

  • Interface between ERecruitment and Personnel Administration

    HI, My Requirement is to arrange names of new recruited people through eRecruitment in specific manner so that to save it in IT 0002. I m searching for the triggering point / enhancement spot / badi where in I can write some logic to rearrange the na