Wireless importing possible?

My wife is looking for a point-and-shoot camera that will let her upload photos wirelessly into iPhoto.
Does iPhoto support that? If so, is it done via Bluetooth or WiFi?
Any recommendations?

Rememberthis,
I have not used the wireless option,although I have read a good deal about it.
It typically uses WiFi since it has more functionality (and range) than bluetooth.
Here is an article comparing some cameras:
http://www.photographyreview.com/wirelesscameracrx.aspx
After you see a camera you like,you may want to go to their website and make sure their software works with Mac OS X.
As far as iPhoto,I think the photos should import to your computer (desktop folder or the like) and then imported into iPhoto.
Hope that helps,
Scott
MacBook Pro,MacBook ,Powerbook G4 1.33 14,,isight Mac OS X (10.4.9) Canon D20,ipod 30 GB,Adobe Photoshop
MacBook Pro,MacBook ,Powerbook G4 1.33 14,,isight Mac OS X (10.4.9) Canon D20,ipod 30 GB,Adobe Photoshop

Similar Messages

Is 3D file import possible in Motion 3?

Is 3D file import possible in Motion 3?
and
If so what types work best?
Thanks in advance.
Eric

What I thought Thank you for the conformation.
Sooooo the only way to make an object or layer appear 3D in 3 is to add an Emitter with a birth rate of zero and an initial instance of 1 w/ face camera checked. Right?

Wireless backup possible?

Is there a way to wirelessly backup files? I'm opening a new office and have 4 terminals and need to have their data backed up and would like to do so wirelessly...is this possible?

A network hard drive is one possibility. Other options are to use another Mac as the designated backup destination, or to buy a Mac mini and use it for this purpose.
As for plugging it into an Airport Express - that is likely not an option. The Airport Express USB port can only be used for printers (you cannot plug a USB hard drive into it). The Airport Express has only one ethernet port, which is going to be used to cable the device to your cable/DSL modem or existing network so it too is unavailable. The only condition under which the Airport Express could be used is if you cable a network hard drive to its ethernet port, and you then configure the Airport Express as a remote base station in a wireless distribution system (WDS) which presupposes that you have an existing wireless network based around another Airport Express or an Airport Extreme Base Station.

Export and import possible?

Hello,
we need to delete a Groupwise user and recreate the same user account after deletion.
Is there a way to export this users mails before we delete the account and after we have deleted and recreate this user import the persons mail again to this newly created GW account?
Thanks,
Thomas

Originally Posted by Dave Parkes
Once you've got the original archive FID and the new user account FID
matched up so you can open the old archive from the new account, just
unarchive everything. As uwe mentioned, either create the new account with
the old FID, or use the FID editor to juggle the archive to match the new
account fID.
Cheers Dave
Dave Parkes [NSCS]
Occasionally resident at http://support-forums.novell.com/
Okay thanks, sorry for being dumb :) but I'm not that familiar with the archiving.
Still some question, would be kind of you if you could help me out :)
We would only like to archive this users Inbox and Outbox, not Contacts and Calendar is this possible?
Steps:
Archive mails to local workstation
Then we simply delete this users GW account
Then we recreate a GW account for this user
After this we use the FID editor to change the old FID of the archive to the new FID?
Then we open GW client and unarchive everything, this will reimport this persons mail back up to the GW server so that these mails are available through Webaccess for example?
And after this everyone is happy, right :)
Btw, where do I find this magical FID editor :) ?
Thomas

Net access via wireless PC - possible?

I have a Power PC Mac Mini (as well as an eMac) that I'll be taking on an extended holiday with me. I also have a laptop pc with a wi-fi card, whereas my mac mini has no wireless capablility. Now, my question is, is it possible connect to the net on my Mini by using the wi-fi capabilities of the laptop PC, with my mac mini networked via an ethernet cable to the laptop? I was under the impression that you can 'piggy back' this way, but I could use some confirmation.
Thanks in advance
Mr.Gone
Mac Mini 1.25gHz 1gig Ram & eMac 1.42gHz 1.25Gig RAM Mac OS X (10.4.7)

Hi Simon,
yes, it is possible to do this. First, you have to configure your PC to access the internet wirelessly. Then you have to enable internet sharing and DHCP on your PC. Last, connect your Mac via ethernet, open System Preferences > Network, select "Built-In-Ethernet" and set it to use DHCP.
-Petra

Ora-1555 during exports and imports. possible causes. ?

From my understanding : I know that this error will occur due to a undo retention being smaller sizer. or rather I should put it that increasing this parameter should help fix the issue.
Whats not clear is below :
Qn. Is it possible that ORA-1555 errors can occur during 'import' even if no other sessions are connected and performing any transaction/dmls ?
Qn. Also why does a ORA-1555 occur during a 'export' ? Is the same reasons ie. there could be possible DMLs occuring ?

Hello,
About your first question:
Qn. Is it possible that ORA-1555 errors can occur during 'import' even if no other sessions are connected and performing any transaction/dmls ?I've never got this error during import but, I always care to get enough place on the UNDO Tablespace.
With classical import you have a commit after each Table's import (by default) and a commit after each row's import if COMMIT=Y so as to use less space in the Rollback Segment.
With Datapump, I often decrease the undo_retention parameter before importing so as to use less space on the UNDO Tablespace.
About the second question:
Qn. Also why does a ORA-1555 occur during a 'export' ? Is the same reasons ie. there could be possible DMLs occuring ?To get a consistent image of the exported data with the classical export you may use the parameter CONSISTENT=Y. While you may use the FLASHBACK_TIME parameter with Datapump (so it means that the undo_retention should be large enough when exporting).
Both use the Undo entries, so I imagine that's possible to get some error (may be ORA-01555) if you don't have enough place on your UNDO Tablespace.
It's possible (thank to the Rollback Segments) to have concurrent DML on the database while exporting.
Anyway, from my point of view, while exporting or importing if you have enough space on your UNDO tablespace and a correct undo_retention setting (not too large when importing not too small when exporting) it should be fine.
Hope this help.
Best regards,
Jean-Valentin

Stalls on import - possible clue & solution

Just in case anyone else is having this prob:
I've had a persistent problem with LR - from the very start - on my laptop where part way through importing Canon raw files from a CF card the import will stall. I would have to relaunch the app and then retrying to import the images would result in several duplicate images (usually 5 or 6) from the point where the first import stalled being duplicated in the library - noted with a -2 at the end of the filename. A possible clue to the problem and a seemingly good solution is by not having the top tool bar showing - the one with the ID plate, modules and thumbnails alongside the progress bar then this seems to stop the freezes. I've done card after card like this and it seems to be working just fine. My guess is that it is the accessing of the thumbnail image for the progress bar which was causing the problem.
I still get regular freezes when LR 1.2 is building the initial previews, sometimes it restarts by itself, other times I have to restart the app. This is a known problem.
Steve

My choice is to first copy all the files from the CF using a card reader to a folder on disc and then import them to Lightroom from the folder on disc.
If you look at that process it is relatively slow. So what I would recommend is to copy all the files off CF card first. I also disable my Anti-Virus software when copying from CF card. (why have it intercept my files when I know that my Nikon/Canon/etc is virus-free).
(If there is any problem, do a quick look through your copied files and compare them to the listing of the CF card. (Open two Windows, side-by-side, one with a listing of the CF card and the other with a listing of the folder on disc where you copied them. Difference will be easy enough to spot).
Then import your files to Lighroom from your disc.
That is how I do it and it always works.

8500A Plus Scan from all-in-one to Mac over wireless only possible?

I have spent most of the morning reading over the various Forum questions and answers regarding my issue but nothing seems to have addressed my issue directly, perhaps what I want to do is not possible. I'm trying to scan to my Mac (Yosemite 10.10.1) from my Officejet Pro 8500A Plus (referred hereafter as "Officejet") over my wireless network without have to connect to my USB.
Scenarios
A) When I have the Officejet connected to my Mac via USB, when I hit the touchpad Scan -> Computer it shows my Mac and works just fine, and it lists my Windows desktop as "Computer Not Listed".
B) When I have the Officejet connected to my Windows Desktop via USB, when I hit the touchpad Scan -> Computer it shows my Windows Desktop and works just fine, and it lists my Mac desktop as "Computer Not Listed".
C) When I have the Officejet connected to neither computer via USB, when I hit the touchpad Scan -> Computer it doesn't show either computer as an option to scan to and says "No Computer Detected" and has some instructions but they don't help me with my Mac, and for the Windows Desktop it tells me to "Activate Scan to Computer" but when I try to do that, my Windows desktop tells me "Communication cannot be established with the printer".
My main goal is to be able to scan to my Mac from my Officejet via my wireless network, with a secondary goal of doing the same with my Windows Desktop. But right now it only seems to work with one or the other if connected by USB. Is it possible to send a scan to my Mac from the Officejet over the wireless network without having to connect it to my compter via USB?
Your help is much appreciated!

Hello,
Thanks for posting your queries on forum,
Scenarios A, B and C holds good with the product functionality, when the printer is connected via USB cable it will detect only the computer to which its connected and not the other computer.
For you to scan to both the computer yes you can install the printer on wireless network, I dont have the printer here with me but will try my best.
Install all the three devices(Mac, Windows and Printer) to the same network
for Yosemite we dont have the full feature driver available so i would like you to perform Apple Software Update and install the HP Printer driver Version 3.0.
You can also download it from the standalone link " http://support.apple.com/kb/dl907 "
For Mac go to Printers and Scanners>> Click on the (+)symbol>>Add Printers or Scanners
An Add window opens up>> Select your printer(Bonjour multifunction) >> At the bottom under USE section select the HP 8500A printer driver>> Click Add.
It will download and install the required driver
on the Printers and Scanners window>>Select the Printer that we added >> Click on Options & Supplies>> Check if you have Utility Tab.
If yes click on the same>> Open Printer Utility and enable Scan to computer.
Now check on the front panel if it displays your Mac.
Install full feature software for windows and Activate scan to computer on your windows machine and it should display the both computer name on front panel of the printer.
I tried the above steps on my Envy Printer and it works.
Thanks
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

AEP file makes AE CS6 crash. No import possible

Treat orginally started to creativecow. Was advised to bring it here. I will use this treat for updates.
Orginal post:
Okay. I am about to become suicidal here.
I am running healthy spec-ed i7 iMac OSX 10.8.5 with CS6 (full specs below in the crash log). I was working on this Premiere project with AE comps in it. Nothing heavy of complex. Just some kinetic typography made with TypeMonkey and some low res images.
After numerous saves (both Pr and AE) I decided to render the final result. And for some reason the render got stuck (Pr). So I decided to reboot my machine and start again. Now I can't open the AEP file it crashes after trying to load comp 6. Also my Premier file is F*cked because 95% of it is that darn AEP file and its giving me the spinning ball of death.
I tried to import into a black project -> Crash.
I tried to import the AEP file without the media linked. -> Crash
I tried to use a different Mac with CS6 -> Crash
I uninstalled all the expensive Red Giant and Saphire plug-ins (which this project doesn't use-> Crash.
I tried to use a windows 7 machine with AE CC -> Crash.
I read that it is possible to open the file in a text editor but so far this hasn't been successful. Although all comps are pretty much similar I have a feeling comp 6 is corrupt. Is there a way to extract this comp via a hex or txt editor? After Effects seems impossible to deal with it.
Suggestions are MOST welcome.
Crash log
https://dl.dropboxusercontent.com/u/1585582/After%20Effects_2013-12-12-152146_Pauls-iMac.t xt
Thanks alot,
Paul

First of all, DON'T KILL YOURSELF! Suicide is a permanent (wrong) answer to a temporary problem.
There is a way to translate an AE project into a human-readable text file. It's called Open Sesame. That might allow you to have a peek around and maybe change a few things.
Definitely file a bug report and include the project for them to look at.
Do you have any earlier versions of the project saved? Do they work? (If you don't have any, you might consider incremental saving on your next project.

Is there a way to import photos to the iPad without the photo also appearing in the Camera Roll? I have a Photo Transer app that lets me wirelessly import photos to an album but they also appear in the CR and when you delete from the CR the photo is dele

Is there a way to import photos to the iPad and put in an album without having the photo also in the Camera Roll? I have a photo transfer app but when I import the album and photos they are also shown in the CR. When you delete them from CR they are deleted from the album too.

You can sync photos from your computer via iTunes, and each folder that you sync will get its own album : syncing photos. You will need to sync all the photos that you want on the iPad together in one go - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next sync.
In terms of albums that you create directly on the iPad no, effectively you are just creating pointers to the photos in those new albums, so if you delete the original photo you will therefore also be deleting all pointers to it.
You could consider a third-party photo management app instead e.g. Photo Manager Pro

No auto-detection of new projects in Workspace? Only Import possible?

I got the project sources for a new project from a friend. I extracted all the stuff in a subfolder of the Workspace of FlexBuilder
and expected that FlexBuilder will automatically recognize this new project and add it to the Flex navigator.
But this was not the case.
Is there really no auto-detection of new projects in Workspace?
Even no "refresh" or "Scan Workspace"?
The only way I found is an explicit "import".
Correct?
Peter

As far as I know, I don't think so, it's because the way Eclipse works, you know these so-called workspaces, for these Eclipse generates a lot of files for instance to keep track of changes in your files, so in a case you make a mistake and messed up with your code you could compare what you did wrong with local history, or for example to remember what files you left open in your last session and so on.

Are 2 wireless connections possible from the same wireless computer?

Intuitively, I know the answer to this question, but I'm going to ask anyway. The issue is that I want to play an internet radio station on a remote stereo in another room. However, I can't simultaneously connect to the internet using one airport connection and then select the remote stereo using another airport connection. Is it as simple as that or is there a work around for this type of situation? Thanks.
iMAC G5 Mac OS X (10.4.9)
iMAC Mac OS X (10.4.9)

Hi Glynnf
No you cannot have 2 connections.
What you want to do is reconfigure your Express (assuming what your referring to as "remote stereo") to "join a wireless network" the router that is connected to your modem. You'll have one connection and access to both internet and AirTunes
Powerbook G4, MacBook Pro, Mac G5, Mac G4, Mac Mini Mac OS X (10.4.8)

Daisy chain isp to MP then out ethernet 2 to wireless hub possible?

hello
I have a 2 x 2.66 GHz macPro and am running 10.5.7
I have 2 ethernet ports in the back of my unit.
and I would like to run the internet into port one.
then daisy chain port to to my wireless hub. (a D-link dl-524)
I know this is a little unorthodox
but there seems to be an odd transfer issue when I go the other way (from my d link to my mac first)
and I need a nice clean signal and thought this may be the best way to go.
so any advice on setting within my network prefs?
thanks

the way I have it now is I have the ethernet going directly into my MP
then what I want is to use my second ethernet port as an out to my d-link so I can
go wireless with the same connection.
I don't want to do it the other way as for some reason it "dirty's" up my signal when I go into
the D-link then into my MP
does that make sense?

Is Airport Wireless printing possible with Officejet 4315

I am thinking of getting one of these Officejet 4315s. I'll be using it as a regular sheet feed fax, wireless not necessary, but will need wireless printing.
On IFelix's Unofficial printer compatibility list with AEBS and AX, the Officejet 4215 is listed, as long as only the older drivers are used (thanks HP for those upgrades); so i'm wondering if the 4315 is just a newer evolution of the 4215 and if it too will print wirelessly with AEBS/AX, whether with old or new HP driver or with HPIJS. Any information or opinions about this?

Hi Judy, I posted this in another thread about using an HP Officejet 4215 but have pasted it below since you might find it useful. I have used my 4215 wirelessly via USB on my Airport since OS 10.2 and it works great. Lost it due to my 10.5 upgrade for a few days but now it's fine again. Best of luck.
The solution to using your HP 4215 (and MANY others) with an Airport (print only, of course) is found here:
http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs
You need to install 3 items to make the printer print through the Airport:
1. hpijs-2.7.10-UB
2. Foomatic-RIP
3. ESP Ghostscript
Everything is found or referenced at the above Open Printing link. In fact the hpijs driver will not install at all unless it finds both #2 and #3 so do them first (or try it and find out for yourself ).
It's all explained at the link but here is how I did it:
Installed the 3 items above then go into System Prefs, then Print & Fax, then find and double-click on your printer, select Info, then select Driver, then find the Foomatic/hpijs driver that is recommended for your printer. Voila! Airport printing works again, under 10.5.1 even! Or you could wait for HP to write a new driver...
Hope this helps. Good luck!

Wireless Charging Possible?

Hey.. We all know about how things are getting better at apple and all the wireless stuff. I was just wondering if we are anywhere near to getting to the point where we can charge our laptops wirelessly? Through a wireless network or whatever means? Cuz the remote optical drive just blew me away. I don't know if this is the right place to ask..

Hi,
will "what" consume more energy in charging? Wireless power transmission is nothing for home right now, the electrosmog and the potential health dangers are immense yet. Of course it would be more practical if we would have it. Best of course would be to never have to worry about charging or energy at all.
Volker

Wireless importing possible?

Similar Messages

Maybe you are looking for