Wireless in buses and train

Hi,
Need help to understand the devices and technology which will provide internet connection in buses and train, i am aware of 3G & LTE, but this connection will be used for RFID and M2M connectivity.
Sent from Cisco Technical Support iPad App

There's a lot of factors why this technology has a very slow uptake:
1. Cost - How much to implement;
2. Fees and Charges - If it's for customer use, how much?
3. Coverage
The main issue is the "uplink". You could get away with LTE as long as there's more-than-adequate coverage where the bus/train goes to. Some cities use the railway station as a wi-fi hotspot (like London) but once you leave the station it goes. It makes sense anyway because of the roaming issue by some clients.
Unless your city's LTE is poor, you wouldn't want to put wifi in trains and bus because a majority of the commuters would probably their phone/tablet "quota" to do surfing.

Similar Messages

PMS and Training and Event Management

Hi Gurus,
Our one the of the client implementing PMS and Training and Event Management.
Could anyone suggest me what are the questions need to be asked in initial meeting with the client.
and if anyone has configuration documents on PMS and Training and Event management please forward to me,
my id would be [email protected]
Regards,
Rajesh Soma

The prerequisites of PMS is OM and PA is mandatory,
PMS is just like an interaction between the manager and the employees in an enterprise, based
On his work they are going to put some rating etc.
In the standard system employee called as “Appraise” Manager called as an “Appraiser” and Manager’s Manager called as Higher level manager “Part Appraiser “ can be a self-peer & customer they can save & provide their Comments to the “Appraiser”
First you take the requirement form client side what are the process and how Appraisal system in client then you have to prepare one sheet like Preparation ,Planning,Process
for business functions and other check below :-
HCM, Performance Management (Flexible) 01 - SAP Documentation
HCM, Performance Management (Predefined) 03 - SAP Documentation
check below once :-
Tcodes for PMS Basic Setting
OOHAP_BASIC      Basic Appraisal Template Settings
OOHAP_CATEGORY      Appraisal Category Settings
OOHAP_CAT_GROUP Category Group Settings
OOHAP_SETTINGS_PA PA: Settings
OOHAP_VALUE_TYPE Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
start your work with above things any other post here again ......

I am trying to use Labview and RP1210 compliant hardware to connect to a truck J1939 bus and receive messages.

I am trying to use Labview and RP1210 compliant hardware to connect to a truck J1939 bus and receive messages.
Specifically I am attempting to read data frames using the RP1210_READMESSAGE . am able to configure the hardware and send a message to the J1939 bus. . I think I have not configured something correctly. I can use the RP1210_SENDMESSAGE and see the message I have sent on the bus using CANalyzer When I use the RP1210_READMESSAGE I get the timestamp from a message and the return from the function sends back the correct number of bytes (the number matches the number of bytes I sent out plus four bytes from the timestamp). What I am having trouble with is actually receiving the data. I have had the same type of behavior from two different hardware (Vector CANcase XL and Nexiq USB Link), so I don't think the issue is vendor specific.
Has anyone been able to make the RP1210_RECIEVEMESSAGE function work correctly?
Thanks for any help

Thanks
I have already tried that. The links are the NI RP1210 wraper. The problem I am having is using labview to interface with the RP1210 layer. The RecieveMessage char*fpchAPIMessage this is the output which is a pointer to a cahracter array. In this variable I can receive the timestamp of the message but not the message. The retun showns the correct amount of bytes are aviaable (18 for a 8 byte message) but I can only get the 4 byte timestamp I think I have to dereference this pointer to view the data. I am not sure how to fix this.

Urgent need for AP and PO test scripts/scenarios and training user manuals

Hi There,
Can anyone send me test scripts/scenarios and training user manuals for AP and PO
Please send me the docs as soon as possible on [email protected]
I will really appreciate your help.
Regards
Kush

Dear
this topics must be included in the testing scenario
1-Enter Supplier Data Enter information for a given supplier, including supplier sites/addresses
2-Create Invoice Batch: Enter information for Invoice Batch header
3-Create a Standard Invoice: Enter information for a standard invoice in an invoice batch
4-Invoice Distribution: Enter information details of a selected invoice
5-Schedule Payment Create Payment Schedule
6-Create a Credit Memo: Enter information to create a credit memo
7-Create Employee Exp:Enter information for an Employee Expense report
8:Validate an Invoice: Validate an Invoice
9-Account an Invoice: Create Accounting Entries for an Invoice
10-Create a Quick Check: Enter data to create a Quick Payment
11-Select Invoices for Payment:Enter data to create a preliminary list of invoices to pay, review the list, and do some changes.
12-Format and Print a Payment Batch: Perform tasks required to Format a payment batch
13-Confirm a Payment Batch:Perform tasks required to Confirm a payment batch
14-Transfer to General Ledger

I need help setting up a wireless network and getting connected to the internet. I have a RCN cable modem now and tried to install a wireless linksys today and it was a disaster

I have a MAC desktop and RCN cable that I have internet through now. I tried to set up a linksys wireless router today and could not get the network settings right, or figure out how to create the network, or get connected. I was successfull for only a few minutes because my phone and laptop had picked up the signal. However my desktop still would not connect to the internet. I had to restart my cable modem after because even after returning to directly inserting the desktop to the modem I could not get on the internet. I am able to get on now but would like to have wireless for my laptop and phone. Do I have to have an Apple router? Are there any easy steps I can take to set up a network without doing any damage to my desktop? I am so lost and have been getting pop ups and even my time changed.
Please help a new person to Apple!

why dont you go to linksys.com/downloads and get the quick install for your adpter

Wireless remote control and FM transmitter in one?

Hello.
Does anbody know if there is a wireless remote control and FM transmitter in one product out yet for the iPod? I am wanting to keep my iPod in the trunk of my GoldWing and control it while I ride transmitting through the FM tuner.
Other ideas or a combination of products to accomplish this much appreciated!
thanks
iPod 80 GB Windows XP

I spent some time (2 hrs) again with the vendor, trying to solve the issue.
The only result we got is that, when the PC is in suspended status, it can be resumed by pressing "ON" button of the IR Remote Control. That's all.
My suspect is therefore confirmed: it isn't a hardware issue. It lokks like the IR Remote Controller and the PC can talk eachother, but they speak different languages.
It is quite a surprise that I couldn't find any information on the use (Settings? Activation?) of the remote control, nor in the topics of this forum. Really I'm the only one trying to watch TV on the PC? Are there any users of a C540 who can tell me their experience?
Thank you

PCI bus and memory ranges in Device Manager.

Hello,
I looked in device manager on my netbook that has no dedicated graphics card (so no dedicated VRAM) and uses shared system RAM as
it’s video buffer, the following memory ranges have been assigned to the on board card -
If I then change the view in device manager to ‘Resources by type’, Windows shows the following memory ranges to be on the PCI bus
Basically all the memory ranges that have been assigned to the card are shown to be also on the PCI bus. I would understand this with
a dedicated graphics card where data needs to be forwarded onto the PCI bus but I know my netbook is using system memory as the frame buffer which then I assume the card reads from there.
Do you know why these addresses are shown to be on the PCI bus, is it just because the card is a PCI device so it’s easier for Windows
just to display them as if they were on that bus, and anything written to these address will still go into system memory?
I know it’s a bit of a random question but I’ve been trying to find an answer online and can’t seem to find anything.
Any help would be appreciated,
Thanks.

Hi,
For your question: Do you know why these addresses are shown to be on the PCI bus, is it just because the card is a PCI device so it’s easier
for Windows just to display them as if they were on that bus, and anything written to these address will still go into system memory?
Yes.
You can check the hardware memory usage via Resource Monitor.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

HP Printer can no longer be found wirelessly by Mac and iOS devices?

I have an HP LaserJet Pro CM1415fnw printer which has been successfully connected wirelessly for quite some time. I recently replaced an older Time Capsule (flat square) with one of the new tower-looking Time Capsules, and the same replacement for an Airport Express I use as an access point. Again this is all the same setup as previously.
The issue is none of the devices can find the printer wirelessly anymore, despite the fact that the printer reports it's on the network and operating fine, and I can see the printer in the Printers & Scanners/Add window. I have attempted downloading and reinstalling the software from HP, deleting old printers in the Preferences panel and reinstalling from there, and nothing has worked. If I try to re-add the printer using the Bonjour Multifunction entry and AirPrint as the driver, it gets as far as the "Setting up the device" progress dialog and then fails with an error that reads: "An error occurred while trying to add the selected device. Unable to communicate with the printer at this time."
I have tried setting up an IP reservation for the printer and using the IP setup in the Add window (instead of the default); with and without the HP Jetdirect protocol; using the AirPrint driver and the selected HP series driver -- no success with any choice.
So far my only workaround is connecting it by USB to the nearest Mac and sharing it on the network using Printer Sharing. This is not the ideal solution, of course, since it means my iOS devices still can't find it and the Mac needs to be turned on 24/7 to share out the printer. I bought this printer originally specifically for its AirPrint capability so I could print to it from iPads and iPhones as well as my Macs. Currently I can't print from any iOS devices so it's rather painful.
Any suggestions to get this fixed will be much appreciated

Reset the TC to factory and start again..
New names.. short, no spaces and pure alphanumeric.
eg TCgen5 base station name.
I also strongly recommend using different names for the bands when things go wrong. TC24ghz and TC5ghz.
Use WPA2 personal security with a short pure alphanumeric password.. (short meaning 8-20 characters mixed case and numbers)
Redo the setup of the Express based on the new setup.
Redo the connection of the printer to the wireless network.
Test the printer by pinging it from the computer.
Delete all drivers in the computer for the printer.. and start over.
That generally will get it running.
If not use the old TC as a wireless AP for printer connection .. by doing extend wireless with it and placing it near the printer.

My Ipad did work on my wireless at home and works on other wireless but no longer at home. My IPhone works at home and others can use the wireless Confused that it did work and now does not?

My Ipad did work on my wireless at home and works on other wireless but no longer at home. My IPhone works at home and others can use the wireless> Confused that it did work and now does not?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
 Cheers, Tom

Linksys Wireless Print server and my Mac G4

I just set up my linksys wireless print server and it's printing from my PC just fine - not so on my G4. My printer is a Canon Pixma ip5200, and the appropriate drivers etc are installed.
I know the IP address and have tried setting up the printer via IPP (and pinged it from the mac successfully). Just no success printing. The printer utility looks like it is printing to the printer but nothing comes out.
Any ideas?

You won't be able to get this to work.
The Canon printer drivers won't allow you to connect to and print to a Canon printer attached to a wireless print server.
There is no solution, there is no way that this can work
You have three solutions.
Replace the Canon printer with another printer for which the drivers will work.
Replace the Canon printer with a networked Canon printer such as the iP4000r (or any other network printer) in which case you won't need the print server
Connect the Canon printer directly via USB to the computer to print.
iFelix

I have a new Epson wireless printer connected and the iPad recognizes it but it won't print. What is AirPrint and how do I connect it?

I have a new Epson wireless printer connected and the iPad recognizes it but it still won't print. What is AirPrint & how do I connect to it?

Patti-
Is your Epson printer on Apple's list of AirPrint capable printers? See <http://support.apple.com/kb/ht4356>.
If it is an AirPrint printer, then your WiFi router may not correctly handle Bonjour data required by AirPrint. Contact the router's manufacturer to see if there is a change to its setup or a firmware update, that will make it work.
One other possibility is that there could be a print job stuck in the iPad's print queue. Double click the iPad's Home button and a row of recent Apps will appear along the bottom of the screen. Scroll across and see if the Print Center is there.
Fred

Copying wireless router password and settings to a new Powerbook

I recently bought a second 15" powerbook after my girlfriend bought my former one.
I bought a Lynksys WRT54G Wireless G Router and after some configuration, I successfully connected her powerbook to my DSL connection wirelessly. However I now am having trouble connecting my new PB wirelessly. I am a bit apprehensive about messing with setting a new password, etc, since I might mess up her wireless connection. I remember it took some time to set the router properly.
Is there a way to copy, and or see, ALL of the settings that I configured in her powerbook for this Lynksys Router, so I can copy them correctly to mine?
When I tried before, I had something screwed up because I kept getting different errors as I tried different settings.
So I need to retrieve the PASSWORD and SETTINGS for the Lynksys Router from her BP and copy them to mine.
Can anyone help with this?
Thanks,
Richard
15" Powerbook DL Mac OS X (10.4.3) 1.5 Gigs Ram
G5 dual 2 gig

Thanks for that info.
I will post this to the Airport section.
The problem is that even after copying all of the settings from my girlfriends PB, including a long password starting with a $, my airport won't connect to the Lynksys wireless network. Airport is turned on (on my powerbook), and 'Ive chosen the proper wireless network with the proper password in network settings. I also added my PB Mac address to the Lynksys router when I was hooked up via an ethernet cable, but I still can't connect the the wireless network. I have both Powerbooks side by side. Hers connects wirelessly and mine doesn't.
I'm missing a setting somewhere, I believe.
Thanks,
Richard
PB 15 DL Mac OS X (10.4.3) 1.5 GIGS RAM
PB 15" DL Mac OS X (10.4.3)
G5 dual 2 gig

BEFW11S4 Wireless-B username and password rejection

I have a BEFW11S4 Wireless-B router and yesterday my router stopped recognizing my username and password, but only after I log in. I am able to log into the main router configuration page after I type in 192.168.1.1 into my web browser and also able to configure the options under the administration and even the security tab. However when it comes to changing any of the options under the setup tab like "internet connection type" or the "optional settings", I am prompted to enter my username and password. I do this, as normal, but this time it does not accept it and continues to ask for it unitl I get a bright red "unauthorized" screen in internet explorer. I also can not change anything in the "applications and gaming tab" either without it prompting for a password that is rejected, whether or not the password is right.
I have updated the firmware to the latest available for this old router, I have reset the router countless times (using the reset button on the back of the router and using the "restore factory defaults" option on the configuration page), and I have unplugged the router countless times as well. I have also tried using Firefox or Opera thinking that it may have been a web browser problem. I have tried many "simple fixes" because I don't know much about routers, but I do know that my router was working fine a couple days ago and I didn't have this problem. I need to change the internet connection type and also forward a few ports but it isn't allowing me to do so . Can anyone please give me advice on what I should do to resolve this problem?
Any help will be greatly appreciated..

Hi… This is very common issue when you have upgraded the wrong file. So check the version of your router and download the correct firmware for the same. Reset the router for 1 min and try configuring the same. If not, might be flash memory on the router is corrupted. You need another router.

I have been using WRT54G wireless broadband router and WU...

I have been using WRT54G wireless broadband router and WUSB54G on my home PC for the last 2 years. It was working fine until recently I encountered serious connection problem.
The WUSB54G cannot connect with WRT54G.
Error message " Cannot assocaite with the access point.
I have checked the followings to try and solve the problem.
1) Refresh site survey the WUSB54G does not show my SSID, but it can show my neighbour'sSSID.
3) When I use my notebook with built-in wireless network adaptor to access wirelss broadband there is no problem at all. I can access my SSID.
4) I have try reseting the WRT54G and changing password but still can not solve the problem.
5) Uninstall and re-install
5) I have installed a new USB adapter (WUSB54GG) thinking that it could be the old WUSB54G is faulty. But still encounter same problem.
I am using Window XP Professional. What could be the problem?
Please provide your professional advice. Thank you.

Hi, Try to update firmware of router. You can get latest version from www.linksys.com/download, Hope it will help you

I need information about ESS and Training and Work Experience

I need information about ESS and Training and Work Experience.
Anyone know if there is something inside of the component ESS about Training and Work Experience (infotypes 22 and 23)?
I appreciate information.
Thanks.

Marciano,
check this documentation
http://help.sap.com/saphelp_erp2005/helpdata/en/4d/c19ce6ef2842258283afc35a54172a/frameset.htm
Thanks
Bala Duvvuri

Wireless in buses and train

Similar Messages

Maybe you are looking for