Wireless in the hotel. Ticketing system solution?

Hello guys,
It's not a first time when I heard about this.
Customer wants to have a ticketing system integrated with their wireless network for the guest users.
But as I know, Cisco has just "WebAuth" with LobbyAdministrator functionality. It's not the best choice.
What kind of systems do you use for hotels? Maybe you have any recomendations? Maybe any Free/Open source?
Also have you tried to do it with Cisco ISE?

The default gateway for the guest vlan should be the nomadix box. So all traffic gets handed to nomadix. The nomdix handles the who, what, where, when and how.
On the wlan side -- you keep it open. Nothing on the webauth .. open wlan, default gateway is nomadix ..
Can you add security on the wlan side. Yes, but then clients would need to know the key or logon name / password.
GUI wise.. Its been a bit since i played with it.. But it was like a 30 minute config and she was running ..
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

Similar Messages

  • Is it possible for a hotel to use Apple TVs to distribute movies throughout the hotel as a 'hotel movie system'?

    Hi,
    We are a very small resort business that is located inside the World Heritage Area.  Due to this, we can't get broadband or even good mobile phone reception.  Needless to say, the only way we get internet is via wireless internet providers and that can be quite flaky.
    We need to establish a hotel entertainment system that can allow us to distribute movies that we've purchased across our internal wi-fi network (to avoid the need to do loads of trenching / cabling etc).
    We are thinking about whether Apple TVs can help us do this? i.e.can we prepurchase and download a stack of movies and then make them available across our wifi network via the Apple TVs?  We don't need to charge guests for access, it will be a value-add part of our service.
    If this is possible is there also a way we can prevent people from access their personal iTunes accounts via the wireless internet?  At the moment with the limited wireless ability, we couldn't afford to have this brought to a halt due to downloads etc?
    Cheers
    Helen

    As Winston mentions, talk to your lawyer as you may be in violation of the terms of use of Apple TV content if you rebroadcast it like that.  There may well be legal ways to do it in your type of situation, but you'd want to be sure.
    If you want to block others from using their own Apple TV's, you should be able to set up a firewall rule to block access at your wifi router.  The ports used are listed in the following Apple KB article.  Depending on your hardware, you could either just block ports, or if you have a firewall of your own inbetween the router and your clients, you could right rules based blocking.  Simplest thing is just disable port 5353in your wifi router(s)), but you could also use a rule based firewall entry to block the application, regardless of port.
    http://support.apple.com/kb/HT2463

  • RFC_ERROR_LOGON_FAILURE: The system is unable to interpret the SSO ticket

    Hi folks,
    i've here an issue that i could not solve, i've implemented SSO between SAP EP and SAP ERP 2005 several times but this time i've the error message
    " The system is unable to interpret the SSO ticket received"
    I've already imported portal certificate, put parameters in instance profile and restart ERP but it still gave the error, i found the same issue from others sdn users but none of then have the solution for me.
    Could anyone help me here?
    This is a urgent matter.
    thanks in advance,
    Pedro Rodrigues

    Hi Pedro,
    what result do you get in a connection test in the portal ?
    To do that :
    open the System definition (under System Administrator/System Configuration);
    Open the ERP 2005 system entry> "Connection Test"
    Select "Connection test for Connector".
    Also make sure that the domain of both systems (portal and ERP) are the same e.g. portal.company.com and erp.company.com . IP addresses are not working in SSO....
    Also helpful is the OSS 701205 which has a attached PAR file for testing the SSO.
    Regards,
    Kai

  • When I connect to the hotel wireless, it takes 2 or 3 minutes to be redirected to the login page

    Hi all,
    I have a problem with my Firefox 4 beta: when I connect to the hotel wireless, and I start the browser, I should be automatically redirected to the hotel's main login page.
    In FF4b I get 2 error messages (attached) and I am not redirected immediately... it takes 2 or 3 minutes to be redirected.
    If I don't want to wait I have to start IE, make the login, and then get back to FF4b.
    I believe this situation is connected with the "Test Pilot" and/or the "sync" function of FF...
    Any ideas about what I should do? Any setting I should change?
    Thanks,
    Tozé
    Link to error messages:
    [http://dl.dropbox.com/u/12096987/FF4b_Error1.jpg Error message #1]
    [http://dl.dropbox.com/u/12096987/FF4b_Error2.jpg Error message #2]

    Hi Prakashkarthikeyan,
    If you are having an issue with your cellular data connection not linking up properly, I would suggest that you troubleshoot using the steps in this article - 
    iPhone cellular data connection issues
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I just purchased the airport Express to use in hotels while traveling to create a wireless network from the hotels wired dsl.  A friend said to set up the network from home prior to traveling.  How do I set this up?  Thanks.

    I just purchased the airport Express to use in hotels while traveling to create a wireless network from the hotels wired dsl.  A friend said to set up the network from home prior to traveling.  How do I set this up?  Thanks.

    In addition to RyanJC's comments, the 802.11n AirPort Express Base Station (AXn) can store up to five different http://docs.info.apple.com/article.html?artnum=108081 configuration profiles. You will need to use the AirPort Utility to create & save these profiles.
    To create a new profile:
    Open AirPort Utility, select your AX from the list, and then, click "Manual Setup."
    From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
    Click "+" to create a new profile; give it a name, and then, click OK.
    Set options, such as network name, passwords, Internet connection method, etc.
    When done setting the options, click Update.
    To switch profiles:
    Open the AirPort Utility, select your AX from the list, and then, click "Manual Setup."
    From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
    Click on the desired profile, and then, click OK to apply the new profile and restart the AX.
    Just remember to switch to the desired configuration profile before removing power from the AX.

  • HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

    I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
    I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
    I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
    Thanks,
    Toks

    Hi Toksyb!
    You may want to try clearing out the PRAM on your computer. This process is explained through this article:
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.

    I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
    Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
    Is there some setting I need to change on the O365 side? Thanks.

    Hi,
    Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
    Please make sure that the following software is installed.
    Windows Management Framework 3.0
    SharePoint Online Management Shell
    And then, open the SharePoint Online Management Shell and use the Script below to test
    whether it works.
    $User = "[username]@[tenant].onmicrosoft.com"
    $Pass = "[password]"
    $creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
    Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
    Get-SPOSite
    More information:
    http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • We got error "System is unable to interpret the SSO ticket received"

    We got error "System is unable to interpret the SSO ticket received" on Backend system(R/3 4.7).
    We use SAP Enterprise Portal 6.0 SP15.
    Please let us know what is problems ?
    We done following steps in SAP EP.
    1. Created LOGON-METHOD (Logon Method : SAPLOGONTICKET).
    2. Export Public-key (verify.der) from SAP EP.
       (System Admin -> System config -> Keystore Administration -> Download)
    We done following steps in SAP R/3.
    3. Start STRUSTSSO2 Transaction.
       In the PSE status frame on the left, choose the system PSE.
       In the certificate section, choose Import Certificate.
         The Import Certificate screen appears.
       Choose the File tab.
       In the File path field, enter the path of the portal's verify.der file.
       Set the file format to DER coded and confirm.
       In the Trust Manager, choose Add to PSE.
       Choose Add to ACL, to add the Portal Server to the ACL list.
       In the dialog box that appears, enter follows:
         system ID    :J2E
         client       :000
         Subject name :CN=J2E
         Issuer name  :CN=J2E
         Serial number:00
       Save your entry.
    4. Set profile parameters
       login/accept_sso2_ticket = 1
       login/create_sso2_ticket = 0
    5. Restart SAP R/3 system.

    Hi,
    I faced the same problem when i am configuring the SSO,
    check the portal client number in System Administration>System Configaration->UM Configuration--->Direct Editing
    and give the same client number
    In the dialog box that appears,
    system ID :J2E
    client :000
    else check weather u r importing the certificate correctly.
    First export the verify.der and and import that using the STRUSTSSO2
    Thanks
    Ajay

  • System is unable to interpret the SSO ticket received

    Hi,
    We are trying to establish SSO between portal and backend system.
    We exported the Portal ticket to backend system and add to ACL list
    still we are facing problem in establishing SSO between portal and backend system
    Please help me in resolving this issue
    point will be awarded for sure
    Bala

    Hi,
    Please check this blog:
    User Mapping-based Single Sign On
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6b1472a7-0301-0010-64bd-dc96509db6f7
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/sso%2bchecklist
    Quick Guide for setting up SSO between EP and R/3
    Connecting SAP systems to Enterprise portal with SSO.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/single%2bsign-on%2band%2bcookies
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2fhelp%2fsdn_help_nw04s%2fsaphelp_nw04s%2fhelpdata%2fen%2fd3%2f41c8ecb31d11d5993800508b6b8b11%2fcontent.htm
    Hope this helps...
    Regards,
    Mona
    Edited by: Mona Kapur on Jan 11, 2008 1:54 AM
    Edited by: Mona Kapur on Jan 11, 2008 2:00 AM

  • The system is unable to interpret the SSO ticket received

    Hi,
    We are facing the following error. Could anyone please help us understand/resolve the same
    com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: The system is unable to interpret the SSO ticket received
         at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java(Compiled Code))
         at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java(Compiled Code))
         at com.sap.mw.jco.JCO$Client.connect(JCO.java(Compiled Code))
         at com.sap.mw.jco.JCO$Pool.initPool(JCO.java(Compiled Code))
         at com.sap.mw.jco.JCO$PoolManager.getClient(JCO.java(Compiled Code))
         at com.sap.mw.jco.JCO$PoolManager.getClient(JCO.java(Inlined Compiled Code))
         at com.sap.mw.jco.JCO.getClient(JCO.java(Inlined Compiled Code))
         at com.sap.mw.jco.webas.WebDynproExtension.addClientPool(WebDynproExtension.java(Compiled Code))
         at com.sap.mw.jco.webas.WebDynproExtension.addClientPool(WebDynproExtension.java(Compiled Code))
         at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.createPool(AbstractJCOClientConnection.java(Compiled Code))
         at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.checkPoolEntry(AbstractJCOClientConnection.java(Inlined Compiled Code))
         at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.getClient(AbstractJCOClientConnection.java(Compiled Code))
         at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModelInternal(BackendConnections.java:261)
         at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:226)
         at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:159)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:183)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.connectModel(FPMComponent.java:699)
         at com.sap.pcuigp.xssfpm.wd.BackendConnections.init(BackendConnections.java:138)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.init(InternalBackendConnections.java:179)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:170)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java(Compiled Code))
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java(Inlined Compiled Code))
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java(Inlined Compiled Code))
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java(Compiled Code))
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:382)
         at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:618)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
         at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
         at java.security.AccessController.doPrivileged1(Native Method)
         at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
    - Harshal

    Hello Erin,
    1. Can you please confirm whether what type of SSO concept has been configured....whether Logon Tickets or user mapping?
    If logon tickets, just check once if the same user-id exists on both systems.....
    2. Can you also try pinging & testing the JCo in hte SLD....just confirmation.
    Awaiting Reply.
    Warm Regards,
    Ritu

  • Wireless internet in hotels giving security certificate expirations

    I noticed this when I was on vacation when I was staying in hotels and trying to use the internet on my ibook. I was trying to login into my bank and credit card sites to check my balance, but couldn't due to some sort of message saying the certificate had expired. Now back at home, with my wireless I don't get that message. Could this have been a temporary glitch or was this because of the hotels wireless? What should I do the next time this happens to fix this issue?

    Hello,
    This tends to happen when your system clock is incorrectly set.
    Does your iBook battery hold good charge? Sometimes if the battery is not charged and you haven't place the power adapter in for a while, the system clock resets itself. (You should see a warning in most cases)
    If this happens again, just check to see if your system clock has been set correctly and if not change accordingly.
    Best of luck

  • Connecting to Wireless Network at Hotel

    I am staying at a Hampton Inn (Hilton hotel chain) and can't get my MacBook to work on the wireless network they have here.
    The hotel instructions to access the wireless are:
    1. Configure your wireless network card as needed. Make sure that data encryption (WEP) is disabled.
    2. Select or enter SSID "hhonors".
    3. Launch your web browser.
    4. Enter the access code provided to you at the front desk and accept the terms of use to start browsing the internet.
    Based on the instructions the hotel gave me, I turned on the computer and opened a browser window using Safari, but instead of bringing up a webpage to enter in an access code, I just got a message that I was not connected to the internet. I then opened a browser window using Firefox and got the same message. When I used the connection diagnostic, I go throught the steps, and it shows the hhonors wireless network, but when I choose, it asks for a WEP key. I even tried entering the access code as the WEP key, which, of course, didn't work.
    I can see the hhonors wireless network when I click on the AirPort, but when I select it from there I get a message that says "The selected network uses an Access Control List to restrict access and this computer is not on the list".
    The hotel has indicated they have not had anyone else having problems (and a couple folks in the lobby are on the same wireless system). I'm at this hotel for a number of days, and while they supplied me with a cable to connect through the ethernet port, I would really prefer to use the wireless (especially as the cable is very short and I am basically having to huddle in the corner on a chair). I know my AirPort works as I use wireless at home, and just left a friend's home where I used their wireless with no problem.
    Do I need to manually change the settings on my AirPort, and if so, how should it be set up?
    Thanks in advance for any assistance.

    Hi CrysMM: I believe Craig in the previous response is correct. I have stayed at a Hilton recently and I believe I had to first select the wireless network as per Craig's instructions. Only then could I open a Web Browser an input the access code in a web page from Hilton. I hope that makes sense, if so Happy surfing.
    Stedman

  • Online Hotel Booking System

    Hi All,
    I used to hang out here quite often a while back (normally in the Java Programming section) and would pay quite a lot of attention to threads, maps and data structures.
    I want to put together a simple online hotel booking system as my own pet project to get a bit of expereince in JSP and web technologies -
    I ve picked up an Oreily book on this toic but does anyone know where I can find an example online hotel booking system which I can use to learn from? I m pretty sure these types of apps have been written in the past but there was not much on Sourceforge
    Any ideas?

    The server doesn't know what a booking is - how could it do anything for you? Your problem is also not about code synchronization - it is perfectly valid for two people to process a booking at the same time, it is only not valid to process the exact same booking at the same time.
    Me - I'd pretend that there is no such thing as two people booking the same slot at the same time - until the very last moment where you actually commit the booking to a particular person. One of them is going to be first and that's the winner, in the other's case before saving you'd check the database if it is already taken and then inform the user that he/she's out of luck. The stupid and easy solution that is also quite safe.

  • Airport extreme in the hotels won't connect to network

    My ibook G-4 connects fine with airport extreme card at home through a linksys router, although the range isn't great. However whenever I am on a roadtrip I can never connect to the hotel wireless system, although my roommate with a peecee always gets on fine. She has signal, I don't. So frustrating... Do I need a new updated extreme card, or what? It is 3.4.2b1. A certain hotel I used to get on just fine, then every trip after, no connection. Anyone know the problem?

    I suggest that you create a new network Location, called "Hotel," or whatever you feel appropriate. In this Location, disable all network configurations, except AirPort...and set the AirPort card to "Using DHCP."
    Most hotels, that provide WiFi, provide DHCP service so that the default configuration of most computers (PCs or Macs) should work with it without any setting changes.

  • Helpdesk ticket system for use with SBO

    Hello Experts,
    I am searching for a helpdesk - message or ticket system for or own use, to improve our customer support.
    At this moment we simply use the email (pop inbox) and the SBO service module, but we want a more sophisticated solution.
    I would Like:
    Automatic reply and a tracking system for ourselve and our customers to follow the processes of a message.
    Connection with our a AR invoicing system.
    What systems can you experts advise me for further investigation?
    Kind regards
    Henk Tjassing

    Project Management for Business One, developed by Maringo, is an Add-on that you can use.
    Kind regards
    Carin

Maybe you are looking for