Wireless Installation Issue

Hi,
I have installed Oracle AS "Portal and Wireless Instance". I have installed the infrastructure. During the installation, I only selected "Oracle AS Portal" on the configuration options screen. Now I want to configure "OracleAS Wireless" too. How can I do this now? I am on 10.1.3.1.
Thanks

A better place to post this is the forum for the general Oracle Application Server here on OTN.
-steve-

Similar Messages

Officejet 8620 wireless installation issue

Hi, a few weeks ago i brough an officejet 8620 and have been able to use it over usb just fine. I have since installed wifi and wish to use the printer over the wireless network; however the print will not install. The driver package finds the printer correctly but wont install it: I have tried disabling windows firewall and AV software to no avail. I have also tried uninstalling and reinstaling the software (including restarting winsocks)

PLEASE DELETE - forgot I already posted about this issue: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-8620-AiO-Connected-to-WiFi-but-cannot-print/m-p/5017651

8500 909n Wireless Installation Issues

I have a 8500 Pro All-In-One that I am installing using the wireless connection.
The iMac installed without any problems.
The HP laptop with Windows XP SP 3 goes through the installation process and sees the printer under the detection portion of the installation, it has the correct IP address listed, but when it is doing the actual install after that point it says that it is unable to complete installation and to either try again or connect to the printer later. I of course tried again several times with the same error. The installation process gets to 44% and sits for a minute, then goes to 50% and sits there for quite a while before jumping to 100% and posting a big red X on the screen telling me that it could not complete the installation process. Any thoughts on this would be greatly appreciated.
Thanks!

Sorry, I mis-read.
Download and run this utility, it should tell us what is going on: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Wireless installation with Smart Install disabled

I am trying to do a wireless installation, after being informed that smart install is disabled by default. The web site to which I am directed offers nothing more than the CD. Where do I begin?

Hello @7329,
Welcome to the HP Support Forums!
I would like to assist you today with installing your HP LaserJet Pro P1102w Printer for wireless printing on your Windows 8.1 64 bit Operating System. Can I please have you follow the steps below.
If you currently have your USB Cable attached from your HP Laserjet to your Windows computer, please disconnect that cable now.
Next, please click here to download the appropriate HP Full Feature Software and Driver package
Once the website opens select the 'download' button on the top left
When prompted please allow the download to Run
Once the download is complete an extraction will Run to 100% and the installer will automatically pop open
Please follow through the onscreen instructions to install your printer
When prompted choose the 'Wireless' connection method
If your printer is not currently set up on your Wireless Network, the installer will prompt your when to connect the USB Cable to configure wireless. Do not plug in the USB Cable until the installer prompts you to
Once the installation is complete please test wireless printing to verify that everything is working properly.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

WVC54GCA Installation issue

I have read a few posts re installation issues and 192.168.1.115 ip errors trying to get the camera to work. I dont find a resolution that helps me so thought I would post before I launch the camera with trash!
Im hooked up on a netgear WNR854T router on with gateway 192.168.11.1. When running setup the settings reproted back are;
Status:             Unconfigured
Camera Name: MyCamera
NW Config:       DHCP
IP:                   192.168.1.115
SN Mask          255.255.255.0
DF GW            0.0.0.0
I then proceed through set up, setting both DHCP and static on different attempts and manualy configuring wireless as it fails to find on search or after many refresh.
Encryption is - WPA-PSK [TKIP] + WPA2-PSK [AES]
I have tried many hard reboots all without success, receiving "Save configuration has failed!"
I am running W7 and camera does not appear in [Network] and so far has not apperead under [Attached Devices] on router.
HELP!!!!!!!!!!!!

WVC54GCA Camera works on the DHCP. If you hardwired the Camera to the Router, your router should automatically assign a IP to your Camera. To know the camera IP address you need to login to the camera setup page and under the DHCP Client table list you will find the Camera IP address. Using that IP address you can login to your camera and make the changes on it.
If its not listed under the DHCP Client table list, then you need to Press and Hold the reset button on your camera for 30sec.. Release the Reset button and then after 30sec plug the power to the Camera.... Now check if the Camera is listed under the DHCP Client table. If yes then you can use that IP address to login to the camera setup page and make the changes on your Camera.

Lightroom 4.2 Installation Issue

Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct. 4.2 install ran fine.
I've read through the posts in the Lightroom forum regarding LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
1) Downloaded the installation software twice.
2) Ran the setup program in admin user mode.
3) Ran the install in admin user mode.
4) Get the following error in a Windows Installer window:
The feature you are trying to use is on a network resource that is unavailable.
Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
Use source:
c:\Users\RMJF\AppData\Local\Temp\{...}
What I have found (after displaying hidden AppData folder):
The location where the .msi file resides is different from the one defaulting in the above window.
I select this alternate path, but still cannot complete the installation.
Furthermore, when I cancel the install, I get this error:
Adobe Photoshop Lightroom 4.2 64-bit Installer Info
Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
The installation source for this product is not available. Verify that the source exists and that you can access it.
All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
So, looking for suggestions.
Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
All quite frustrating. Hope you can get me to a speedy solution.
(System info: Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare! Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well. No other apps are running during the install.)
Message was edited by: marzo19

untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
even the microsoft fixid diden't help.
So also desperate.

Is there a fix for the MBP wireless dropping issue?

I began to experience the Macbook Pro dropping wireless connectivity on my very 1st Apple in 2008. At the end of the day my machine was replaced with a new Macbook Pro mid 2010. It appeared to be working just fine until about 2-3 months ago when I started dropping my wireless printer connection. I searched the internet hoping for a driver update from HP or something from Apple and each time I found something, the problem still existed. I even thought that by upgrading to Lion would resolve any issues that I have with my MBP wireless connectivity issue. After upgrading to buying a new router, new printer and upgrading to Lion; the wireless dropping issue still remains unresolved! I know there are several hundred in not thousands of people who are having the same problem so what are we supposed to do?
When my 1st MBP was replaced in 2010 I had to stop working because I was diagnosed with "Failed Back Surgical Syndrome" and was in the process of applying for disability. Something in the back of my mind said that I needed to purchase Apple Care for this new replacement however I had used all of my savings & retirement to sustain life for me and my family that there was nothing for Apple Care. If it weren't for my church and family I am not sure what I would do during the 18 months of no income while waiting for a decision only to receive an appeal until I findly stood in front of an Administrative Law Judge who heard my case and granted me disability. Besides there was no way I could ask anyone for money to purchase a warranty for a top of the line laptop while the country was falling off an economical cliff.
I broke down and called Apple Support and was told that I qualified for technical assistance regarding the upgrade to Lion a few weeks ago. The tech on the phone had me run some disk utility tests and had me repair permissions which she said could be the cause of the problem. I willingly went along with her in hopes that this was indeed the fix. However, within 10 minutes of hanging up the phone my MBP began to drop it's wireless connection to my new HP printer and also the Internet. Hence my question above is what I am really looking to have answered! What is the fix to this problem that so many people are having issues with? I couldn't afford to purchase Apple Care back in 2010 and I can't afford to purchase a new 2011 machine today if that truly is the fix!
I will be disabled for the remainder of my life and I have grown dependent upon my computer to stay in touch with friends and colleges from work. I worked for the IT Group at Wynn Resorts and I can say that the type of service Appple is providing it's customers is not what I learned over the past 25 years with Mr. Wynn. Why can't Apple get the simple concept that it's customers are it's life line and keeps them in business. I need help and I don't know what to do nor where to turn. It would be different if Apple acknowledged the issue and said they were working on it however they aren't. I plead to Apple to help me fix my notebook so I can stay connected to the outside world vs. couped up inside my home.
Best Regards,
Scott Leavitt

I am simply lookig for some help not an argument. I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts. I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another. As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP. This MBP was running Leopard when the problems started
I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue. I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion. In Windows 7 I am able to print and scan to my hearts content without any issues. I am able to browse the internet as much as I want. I close Fusion and try to connect to my printer via wireless and nothing.
In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems? Out of the 1000 + posts is there a consolidation of which answer is the best? BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time. Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. -- Thanks

Installation issue on opensuse 11

Hey All, Im a Windows guy still struggling with Linux set-upsso take it easy on me! :) and Im having a hard time getting blaze installed and running. This is what Ive done so far. I've successfully set-up the latest copy of openSuse11 64 bit version with: Tomcat 6.0.16 (Tested and running) ANT 1.7 JAVA SDK & JDK 6 Junit (ant-junit, junit, junit-javadoc, junit-manual, libcppunit-1_12-0) Downloaded both blazeds.war and blazeds_src_3-0-0-544.zip From Tomcat Manager I uploaded the blazeds.war file successfully. I unzipped the zip file into root/blazeds and from a command prompt ran ant. These are the errors Im getting: * [taskdef] Could no load definitions from resource net/sf/antcontrib/antcontrib.properties. It could not be found. (Repeats about a dozen times) * BUILD FAILED * /root/blazeds/build.xml:445: The following error occurred while executing this line: * /root/blazeds/resources/fds-ajax-bridge/build.xml:52 Problem: failed to create task or type if Cause: The name is undefined. * Action: Check the spelling * Action: Check that any custom tasks/types have been declared * Action: Check that any <presetdef>/<mac rodef> declarations have taken place. Variables: env | grep _HOME ANT_HOME = /usr/share/ant JRE_HOME =/usr/lib64/jvm/java/jre JAVA_HOME =/usr/lib64/jvm/java/jre SDK_HOME =/usr/lib64/jvm/java/jre JDK_HOME =/usr/lib64/jvm/java/jre Any ideas? Brad

Hi Alex,
Sorry I've been away and just got back. Presently I'm working from jrun4 and would like to use blazeds instead. Once my projects get going I would need the ability to use my customers already made linux/tomcat boxes and just plug in blaze.
I look forward to your answer.
Brad
On Fri, Aug 1, 2008 at 12:57 PM, Alex Glosband
<
[email protected]> wrote:
A new message was posted by Alex Glosband in
Configuration and Getting Started Discussion --
Installation issue on opensuse 11
Are you just trying to install and run BlazeDS? Why do you need to build from source?
-Alex
View/reply at
Installation issue on opensuse 11
Replies by email are OK.
Use the
unsubscribe form to cancel your email subscription.

Forms 10g Installation issue on windows 7 Professional service pack 1

hi
I am trying to install oracle forms 10g 64 bit windows 7 Professional service pack 1 ..
Below are 2 files that i am using ..
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
But it failed but the error is ..
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 Failed <<<<
just wondering if there are any workaround ..

Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7. You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified. You must have a My Oracle Support account to obtain the patch.
Now, to your question - is there a workaround; the answer is yes. There are known issues with this installer. I'll list them and their workaround.
1. The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
Workaround: Right-click the Installer and select Properties. Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for: Windows XP SP3).
2. The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
Workaround: You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes. See this Microsoft article for more information on changing VM settings. http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
This change will require you to restart your computer. After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
3. The Oracle installer MUST be installed as an "Administrator".
Workaround: Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab. Click the "Run this program as an administrator" checkbox.
4. Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
Run the Oracle installer and it should now install succesfully.
Craig...

HP Photosmart D7360 -- Driver/Installation issue

For some reason my HP Pavillion Laptop no longer recognizes my HP Photosmart printer. I have downloaded the drivers, I have the disk and no matter what I do, I can't get the printer driver to install.
It tells me that it can load verythign BUT the driver. Any ideas?
Thanks
jstjohn

Welcome to the forums @Pierre-Louis ,
I read about the installation issue you're having with your Photosmart C4280 on Windows 8. I have a guide that I have heard successful results from and I hope they work for your scenario as well!
Click this link to get started: A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

New HP LaserJet Pro P1606dn wireless installation

This is probably a dumb question, but I cannot find the answer online. I bought this printer because it was advertised as wireless. I want to place it in a closet adjoining the room where I have my desktop and router. I will plug it into the AC outlet there, but I do NOT want to run a cable to my computer or router in he next room. The directions seem to say that I MUST run a cable to the router for a wireless installation. Please clarify. Thanks,

Hi,
As far as my info goes this unit does not have a wireless option, just usb and ethernet (wired network)
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Photoshop CS6 Installation issues

Anyone on 10.7.5 having PSCS6 installation issues after trying to apply update via Creative Cloud?

This link took me to location where I chose the appropriate version of Bridge update and it worked. My verion was updated to 5.0.1.23
http://www.adobe.com/support/downloads/product.jsp?product=108&platfor m=Windows

NWDS installation issue - "Please wait... completing the install"

Hi all,
I got the same "Problem" each time I update my NWDS.
[Re: NWDS installation issue.|Re: NWDS installation issue.]
After the installation, when I start the NWDS I get always the message:
"Please wait... completing the install"
If I create a new Workspace this really solves the problem but I don't like to create every time a new workspace after an update and copy all my projects back to this new workspace.
Is there no other solution around? I think I'm not the only one who has this troubles, am I?
Regards,
Stefan

Hi all,
I solved this problem by myself. So for everyone who is interested in how to solve this problem:
Just delete the folder .config in
\workspace\.metadata\
During the next start of NWDS this folder will be created and everything will work as excpected!
Stefan

Application Runtime Environment installation issue

Hi,
JDeveloper 11.1.1.3.0
OS: Solaris SPARC
I am trying to install the application runtime environment and I am getting the below error. Please advice me on how to resolve this issue.
JAVA Version in Solaris SPARC :
weblogic@comm1 ~/Installs $ java -version
java version "1.5.0_24"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_24-b02)
Java HotSpot(TM) Server VM (build 1.5.0_24-b02, mixed mode)
Error:
weblogic@comm1 ~/Installs $ cd Disk112/
weblogic@comm1 ~/Installs/Disk112 $ cd Disk1/
weblogic@comm1 ~/Installs/Disk112/Disk1 $ ./runInstaller
./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
./runInstaller: syntax error at line 299: `count1=$' unexpected
Thanks,
Rajesh

Hi,
I have installed the jdk 64bit version and tried the application runtime environment installation but I am still getting the same old error. Here it is..
weblogic@dwlsalescomm1-c2 ~/Installs/Disk112/Disk1 $ ./runInstaller -jreLoc /apps/wls/WL10/jdk1.6.0_21/
./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
./runInstaller: syntax error at line 299: `count1=$' unexpected
JDK Version:
WL10/jdk1.6.0_21/bin $ ./java -d64 -version
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b06)
Java HotSpot(TM) 64-Bit Server VM (build 17.0-b16, mixed mode)
Please advice me on how to resolve this installation issue.
Thanks,
Rajesh
Edited by: Rajesh on Mar 15, 2011 8:28 AM

Acrobat Installation Issues due to Computer Switch

My surface bit the dust last week and I had to replace it. Downloaded acrobat successfully tot eh surface but then that apparently cut off access to the adobe pro on my home computer.
How do I get acrobat re-installed without the "you don't have a license" error message.
I am on a subscription plan
P

licensing issue-the system does not recognize that I have a license so I would love to eb able to speak with a real person so they coudl go and look at my purchase and fix the problem.
I'll be calling on Monday- right now I am using a trial version again but need to fix before the 39 days are up Peter Collopy, CSP, CIH, CHP
Damariscotta, ME518.859.1944 (cell)
From: RahulTyagi4you <[email protected]>
To: Peter Collopy <[email protected]>
Sent: Sunday, March 1, 2015 5:30 AM
Subject: Acrobat Installation Issues due to Computer Switch
Acrobat Installation Issues due to Computer Switch
created by RahulTyagi4you in Acrobat Installation & Update Issues - View the full discussionHi Peter Collopy, Is Acrobat properly installed on your system?Please confirm if you facing installation issues or licensing issues? Regards,Rahul Tyagi If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240431#7240431 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240431#7240431 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Wireless Installation Issue

Similar Messages

Maybe you are looking for