Wireless Internet access via requires unplugging cable modem -

I have a brand new MacBook Pro with Snow Leopard (10.6.1) and Airport Express (7.4.2). I have high speed Internet via Comcast/cable modem. I spent 30 minutes with the Apple Tech Support folks and was finally able to get wireless internet access. However, after I shutdown and reboot, the only way I can wireless internet is to unplug the internet cable from both the wall plug and cable modem and unplug the modem, both for about two minutes. This isnt what I had in mind when I crossed over from the dark side (PC laptop world) and am having buyer's remorse. Does anyone know how I can fix this problem (i dont want to unplug cables before each session on the internet)?

Mr. Timmons,
Thank you so much for the response. I thought the complete reboot would work, but apparently not. I followed the directions precisely, even waiting a few minutes longer than suggested for each of the steps. My air express is still blinking yellow. I think the issue has something to do with the DHCP and the IP address which are diifferent. The IP address is one series of number (starts with 169), and the LAN IP address is another number (starts with 10). Status on airport express show yellow for internet connection, and yellow for no DSN servers. When I go to the internet tab of airport utility, it shows the iPv4 address starts wutg the 169 number. When I click on the network tab, the DHCP range starts with the 10 number. When I open the Network Options window, the iPv4 DHCP range starts with the 10 number. I am at a loss as to how to get them to match up (with either the 169 number or the 10 number). V/R sjbgtmo

Similar Messages

The connection between your access point, router, or cable modem and the Internet is broken.

At random points throughout my laptop usage, I randomly disconnect from the internet and receive these 2 messages:
1. The connection between your access point, router, or cable modem and the Internet is broken.
2. The default gateway is not available.
It fixes the issue for a short period of time, but constantly happens. This is really starting to annoy me. I have no problems on any other internet, and other people i live with are connected with no issues to the internet. I have tried a number of solutions
online that has "worked" for others to no success such as resetting the router, fooling around with command prompt, and changing the performance settings to not drop internet when low on power. Does anyone have a solution for my technical problems?
I am running Windows 8.1 on a Lenovo ideapad that is less than a year old. I will be honest I am not a very knowledgeable person when it comes to computers, so please use simplified explanations.

Checked this ?
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/window-networking-troubleshoot-error-the/c130ede9-757e-4224-9ae8-3cceb82eeb74
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

My airport is not connecting to the internet. I have a cable modem. and i'm on the internet now connected directly to the modem. what can i do?

my airport is not connecting to the internet. I have a cable modem. and i'm on the internet now connected directly to the modem. what can i do?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Wireless Internet Access (Cisco IP NGN or Cisco Wireless Mesh Networkin)??

Dear Cisco Wireless Team
Please educate us on where to start, or the CISCO product we might need to purchase
We are trying to branch out a new Internet wireless access and wireless phone service business in our company, and presently looking for the right Cisco product solution to purchase to enable us offer this service in LAGOS, NIGERIA.
The service will be rendered in Africa, the country NIGERIA, and the city LAGOS.
We would like to mount or install the product in Lagos, Nigeria.
As we are new to this kind of service. We would appreciate if the Cisco wireless team can work with us in pointing or directing on the right product to purchase and what are required. We understand the Cisco Wireless Mesh Networking Solution, Cisco IP Generation Network, Cisco 12416 or 7600 Series Router might be the right products to purchase, but we are not sure on what needed or what are required to meet our service need.
Possibly we would like to offer Wireless Internet Access to unlimited subscribers, and also Wireless or Mobile Phone service to unlimited subscribers in Nigeria.
Anticipating your reply

I suppose Cisco Wireless Mesh Networking would be a good choice.The Cisco mesh architecture makes it easy to scale coverage as capacity needs dictate, including increasing access point density; adding wired connections, controllers, and radios; and using dual high-powered, high-sensitive radios and a selection of high-gain antennas.Refer the document for IP NGN in the following URL http://www.cisco.com/en/US/netsol/ns537/networking_solutions_solution_category.html

Restrict wireless internet access on certain periods of time

Hello,
We need help on setting up a network with some restrictions for the attached clients.
We're quite new at setting up a network at this size.
Used devices:
1x SRP 540 router
1x SG 300-10P managed switch
4x AP 541N accesspoint
What we want to do:
1. Around 100 laptops and desktop computers need wireless internet access, but some of them on limited times during the day.
2. Not all wireless devices are allowed on using the wireless network.
3. There are also wired desktops that don't need restrictions.
4. We need the possibility to restrict most of the wireless devices to access certain websites or use certain applications on those computers to use internet access during the times that the computers are allowed to access the internet.
5. We want to restrict the clients for using torrents or other possibilities of downloading illegal content.
What we were able to do:
1. The accesspoints (AP 541N) are clustered to achieve 1 large wireless network.
2. Only mac-adresses that are listed in the accesspoints are capable of using the wireless network. Other mac-adresses are not allowed to use the accesspoints.
What we tried already:
1. adding the mac-adresses for the accesspoints to the list of "internet access policy" in the router. Internet access seemed still possible during periods the access wasn't supposed to be possible.
2. adding the mac-adresses from all clients in this internet access policy seemed useless. Only 10 Internet Access Policies seem to be possible to program. 8 mac-adresses per policy. Knowing there are (at least) two policies needed to restrict a group of 8 macs to access the internet in 24 hours (because blocking the internet from f.e. 22u in the evening to 6 in the morning is not possible because 6 is smaller than 22 - or 10PM).
Besides, after blocking internet access, we need also to write policies in blocking some websites or keywords.
Thanks already for your guidelines.
Wim

what about the thoughts of radius for authentication which is connected to active directory for your wireless users. Then have those people you must limit access too during the day in their own security group that's only allowed to login to the domain during certain times of the day.
To limit sites or what they can do on the Internet will require a separate solution for content/URL filtering. Then you can make policies and apply to your security groups in active directory block by category, keyword, and so on.
This is all great assuming you can get these clients into AD.
Just a quick thought, hope it helps.
_dschlicht
Sent from Cisco Technical Support iPad App

Wireless internet access in other countries

Does anyone know if the iBook can be used for wireless internet access in other countries, specifically Buenos Aires, Argentina and Italy?
iBook G4

Hi,
never had any problems with this (hotels and airports throughout Europe, Middle-East,...), somethimes you get immediate access to a provider when using your browser (then all you need to do is buy time with your credit card number); or by using the internet application: you will see the names of the providers in the list because of the signals your computer receives; then again you need to buy time;
greetings, Dag

I recently bought an i phone 5, but in the home with wireless internet access, it si countinued when off, i do not know what reason. but i go to apple store, the phone can working with Wi-Fi

i recently bought an i phone 5, but in the home with wireless internet access , it is continued when off, sometimes can not working,
i do not know what reason, but i went to apple store, Ha, the phone can go to Wi - Fi and connected is good.

but in the home with wireless internet access , it is continued when off, sometimes can not working,
What does "it is continued when off" mean?
And the same for "somtimes can not working"?

Relocating and wireless internet accessibility

I'm relocating and I'm wondering how I can find out if I have wireless internet access there and if I can keep my Fios or if I'll have to switch to another provider.
Thanks.

You may want to post this on the Residential side of the forum as this is for the cellular phone side.
At the top of this screen is a tab RESIDENTIAL. Click there and you can set up an account on that side and ask your question.

How do I configure my AirPort Extreme as a wireless access point? My cable modem goes to a router, and one of those ports goes to my AirPortExtreme.

I am about to hook up my airport extreme. My cable modem goes into a router, and one of those ports will supply my airport extreme. I was told by the Apple Store that I would need to configure my airport extreme as a wirreless access point. How do I do this?

With sbcgobal I got a Gateway 2wire modem. What I would like to know is how do I set up my APE as remote?
Unfortunately, you won't be able to do this as few non-AirPort routers will work with AirPorts in a Wireless Distribution System (WDS).

Cannot see Mac Mini Server from Internet: DynDNS alias gets thru cable modem to wireless router, not to the Mac Mini. How to configure?

I want to make my Mac Mini Server (Lion) visible to the Internet from my home LAN. I have followed the Lion server install wizards and also set up a dynamic DNS at DynDNS.com.
When I enter the Internet address with the proper alias from a web browser, I get dumped into the admin screen of the Linksys wireless router WRT300N. Hint: the WRT300N provides DHCP for the LAN, not the cable modem providing DHCP. The WRT300N has DDNS service set up. NAT and RIP are disabled. The Mac Mini DHCP is reserved.
Suggestions? I could use the Motorola Surfboard SB6121 to provide DHCP but have hesitations.
Point me to the right discussion/article and get me back on track, please.

This sounds like a simple port forwarding issue, but I don't understand your LAN setup.
The WRT300N has DDNS service set up. NAT and RIP are disabled.
The chances are, you're running NAT somewhere in your network. If not the WRT then what? If it's your cable modem then you must have port forwarding configured on the cable modem, and that's where you need to focus - change the port forwarding to point to your Mac Mini's address rather than the WRT.
HOWEVER, it is far more common to have the wireless router perform NAT and DHCP, which is why I question your setup.
Not directly related, but:
The Mac Mini DHCP is reserved
Nix this. Your server should be configured manually, with a static IP address, not DHCP, even with a reservation in the DHCP server. The only advantage of DHCP is for dynamic hosts (hence the 'D' in 'DHCP') or if you expect to change your entire local subnet on any kind of frequent basis. The reality is that you can't just change the IP address of Mac OS X Server like this - there are too many dependencies, so it's better to set it manually, knowing that there's a cost (and pain) to change the server's address.

Conneced to wireless router but no internet access via wireless

I don't recall the physical connections being directly attached to the router. The router in question is a Linksys WRT54G/GL/GS. My initial thought was since we rolled out Voip fairly recently one of our phones might have ganked the IP address, but that is not the case. Each of them have their own IP addresses and I don't see any conflicts. I am also able to ping the router and log into it remotely from my office, which is in a different city. Could it possibly be a firmware issue?

Hi Everyone,
One of my offices' routers is broadcasting but has no internet access. The office does have internet if you hardwire in but outside of that nothing has worked so far in regards to the WiFi. I have power cycled the router and modem to no avail and DHCP is enabled but no one can get online via WiFi. It seemed to just up and decide one morning that it was not going to allow internet access.
This topic first appeared in the Spiceworks Community

I am using a verizion jetpack to wireless connect to an airport express next i want to connect a Airport extreme wired from toe express to create a second private network that has internet access via the jetpack

Thanks for the help after looking over your sugesstion I did some additional troubleshooting which i should have done in the beginning and heres what i found
Airport express is joined to and existing wireless network and i have internet access....all good
I set up my Airport Extreme as follows:
                    Connect using :ethernet
              Ethernet Wan Port : automatic
              Connetion Sharing : Share a public IP address
Tcpip      Configue IPv4: Using DHCP
DHCP                   Begin address: 172.16.22.200
                           Ending address: 172.16.22.254
Wireless    Create a wireless network
                         Wireless network name Test1
                          wpa2 security
This is needed due to set ip address of device on this private network did not address NAT
Conneted Express ethernet port to Extreme wan port
All wired devices have internet access and i get a double nat status which ignore
however my wireless device will not connect.... sometimes they will they want
any suggestions

Here are sceeen shots of the Express

Can i connect directly from my cable internet connection, or do I require a cable modem?

I would like to se up a home network using my cable internet without having to rent a cable modem from my service provider. Can I use a Time Capsule to connect directly to the cable internet, or do I need the modem to establish the connection before using the time capsule to create my network?

The Time Capsule does not have a modem onboard. You will need a modem if you want to be able to connect to the Internet.

Load Balance guest Internet access via two different DMZ zones at two sites

Hi Sir,
My customer has the following unified wireless guest access requirement:
- There are 2 internet links and dmz zones at two different locations, Site A and Site B
- Data centre is at Site A
- WiSM is proposed to be installed at the Cat 6500 in Site A
- Lightweight AP are distributed across Site A, Site B and other branches
- Only one anchor WLC is proposed at Site A, DMZ zone to provide guest internet access
My customer would like to load balance the guest via the two internet link at Site A and Site B but with the same SSID across all locations. Can it be done since only one anchor at Site A? How about puttting another anchor WLC at Site B, DMZ zone? But how can i establish two EoIP tunnel to two different anchor WLC from a single WiSM?
Thanks for your help
Delon

You can... but you can't control where the traffic will flow. The wlc will determine which DMZ wlc it will use. The wlc will load balance, but traffic in site A might go to site B. I currently have deployed that senerio in multiple client installations....

Internet Connection Issues between Airport & Cable Modem

I'm posting this because I couldn't find a similar answered question here, and I hope to save someone else the grief I went through trying to get my wireless network working.
Bought an Airport Extreme to connect to my non-wifi cable modem. The Airport had no difficulty setting up the network, and all of our computers and wireless devices were able to connect to the network. Unfortunately, none of them could connect to the internet.
The problem turned out to be that you need to edit the default network configuration to add the DNS server addresses of your cable provider. As soon as I did that, all the devices had internet. As far as I can tell, the settings live on the modem, but are not picked up by the Airport in quick setup process.
I hope this saves someone else a trip to the Apple store or a long support call.
Ricka

Bypass the router and connect your computer directly to the modem.
Make sure that you can access the Internet when you connect the computer directly to the modem.
If you can access the Internet through the modem then try to configure the router manually.
Connect the modem to the Internet port and computer to Ethernet port on the router. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Now try to reconfigure the router manually.
Follow this link to configure the router with CABLE Internet service.
Follow this link to configure the router with DSL Internet service.

Wireless Internet access via requires unplugging cable modem -

Similar Messages

Maybe you are looking for