Wireless Internet connection slow on MBP, not on 6 yr old Thinkpad

I'm curious if anyone has any insights into this, but for some reason when surfing the web, my MBP spends a lot of time with pages "loading" and sometimes they don't load at all. Meanwhile, my 6 year IBM Thinkpad is cruising right along. Is this a problem that would be fixed by switching to an Apple branded wireless router? Do MBP's not handle 802.11b very well, that that could cause the problem? I'm really perplexed as to why this would be.
Thanks in advance.

So my macbook pro 2.33 ghz intel core 2 duo does the same thing!
I have searched online and there seems to be a lot of people having this same issue. In the console log everyone is getting this mDNSrepeater delayed by 5 seconds msg.
From what I can read from others problems it mostly seems to occur with the 10.4.3 update and above. It is seen on ppc and intel models
no solutions seem to work well.

Similar Messages

Wireless Internet Connection Slow

Whenever I access the internet on my Mini, the speed is slower than my other wireless internet connections on my PCs. Whenever I click a link or type in a URL to go to, it takes awhile for it to connect to the site (in the status bar, it will be stuck on the "Looking up -url-" for a bit); once it is connected, it loads fairly fast.
However, using the same wireless internet network, the internet speed on my PC computers are significantly faster. Is there a way to solve this speed issue? I've gotten used to it somewhat, it would just be nicer if it was the normal, faster speed that it's supposed to be.
-My ISP is Comcast
-I use Airport Extreme to connect to the wireless network

Might be a DNS issue, like we are talking about in this other thread:
http://discussions.apple.com/thread.jspa?threadID=1619004&tstart=0
If the DNS is misconfigured, the PCs may have different timeout threshholds from the Mac, and perhaps they jump to the next DNS quicker than the Mac does.
Anytime you see lots of "looking up" messages, it's a good bet the DNSes are not configured right.

Slow wireless internet connection using airport extreme

My wireless internet connection works but is very slow (<80kbs). The problem seems to be with the airport extreme (brand new, purchased in May 07) because my connection is very fast (>6mbs) when i connect by wire to the airport extreme base station. Signal strength is strong, so i can't figure out the problem. Any ideas?
imac Mac OS X (10.4)

BK37, I hope you've solved your problem by now. But if not, and for the benefit of others reading this post, let me share what I (finally) discovered when I had virtually the same problem, i.e. 8mbps wired speed, <50kbps wireless speed.
I tried literally <span style="font-style:italic;">every suggestion I could find in the Airport discussions. First, I can assure you that changing the channel can give you incremental speed improvements in some instances, but for radical drops like yours, it's not the answer. Nor is turning off ipv6, or changing to WEP, or turning off Remote Access, or moving the AEBS, or or or or or....
With such a radical drop in speed, it's most likely you have a hardware-related blockage somewhere. In my case it was my wiring configuration. My setup was France Telecom Livebox (ADSL modem / ethernet & 802.11g router) --> Ethernet cable --> Linksys RTP 3100 IP phone adapter / router --> Ethernet cable --> AEBS --> 3 Airport Express set up to extend network and run AirTunes. After eliminating every other possible problem, I narrowed it down to the Linksys router, which for reasons I have yet to figure out was trapping the speed to the AEBS. I ethernet cabled both the Linksys router and the AEBS directly to the Livebox and presto! Back to blazing speed.
Hopefully this info will be helpful to you or some poor soul in the same situation, as I would have loved to have had it myself before I pulled every hair out of my head!
iMac 21" Intel Mac OS X (10.4.9)

I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later

IMAC Wireless Internet Connection Problems All Of A Sudden

My Imac is well over a year and a bit old and has been able to connect to my wireless internet connection absolutely fine until the past week and a half. At first the connection wouldn't work and when I would turn my airport on and off and reset the router, it would eventually work, now that is not working at all. My airport status is either showing 'airport is turned on but is not connected to a network' or 'airport has a self-assigned ip address and may not be able to connect to the internet'
I have formatted my imac twice and still no avail and the last format I tried to join wirelessly straight from boot but it wouldn't join saying 'there is a problem with the wireless connection and you're not connected to the internet.' the annoying thing is I can see the network sitting there and can't join it, my network is also unsecure so no need to input a password. All my home PC's and my Iphone and Blackberry find the network easily enough, although recently the Iphone has began showing only 1 bar of wifi connection.
I am at my wits end as I am unable to connect at all now, I am all out of ideas and have been bashing my head off a wall for the past day without any connection at all.
My router is a buffalo AirStation wireless G high power model, my IMAC is an intel core 2 duo 20", if you need anymore information of my hardware I will gladly provide it. I'm running MAC OSX Leopard 10.5, out the box as I've been unable to run any software updates as I can't connect to the internet.
Please, if anyone can shed any light at all on this issue I would definately try anything.
Thanks in advance and regards.
Message was edited by: proxykillah

Anytime you see a self-assigned IP address in your network prefs you know it surely is a problem
with your router configuration. Power down all equip ... make sure modem is off for at least 5 minutes
restart modem, restart iMac ... check your network pref on iMac and make sure it's not 169.x.x.x
If so you will need to recapture the settings from your ISP's modem to the Buffalo.
Always use a secure wireless connection (WEP, WPA, WPA2) or else the whole neighborhood will suck down your bandwidth the slow down what your paying for. I use Time Capsules or AEBS (Airport Extreme Base Stations) that allow you to stealth mode and lower signal output and make the device
as a "closed network" ... meaning no one else can see and tap into your WIFI home network!
802.11N is better than G. and especially when you can use dual bands 2.4 / 5GHz to stop various home interferences. The backup of Time Machine only makes life much easier also! Xtech

Internet connection slows down after a while

I have a wrt160n connected to an arris cable modem. When I set it up it works fine - after a period of hours the internet connection slows down a lot. If I then connect my computer directly to the modem it is is fast again. But to get the signal to the router working fast again I have to reset the modem and power cycle the router. Is there a conflict - is my router rationing access or what?

You should download and upgrade/flash your router's firmware...
Download the Firmware from here
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1350 and click Save Settings...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Web browsing, internet connection slow slow slow

My wireless internet connection is extremely slow. It is surely a Leopard problem. My PC works perfectly on the same wireless network. I called apple support and they concentrated on the airport (FRUSTRATING!!! THE PC WORKS 100%%%!!!!)
Since I installed Leopard my Mac is virtually unusable (not exaggeration!). I average 40-50 seconds per page. It just sits there with the circle thing spinning and spinning and spinning.
Does anybody have this problem? If so how do we get Apple's attention?
Can I revert back to Tiger until this is fixed? Does anybody know how to do that?

I was having the same issue and after reading these threads I took a look at my network settings. For some reason Leopard picked up my router as a DNS server. My router, while supplying my ISP's DNS servers to me via DHCP, is not a DNS server itself. I started to play and here is what I came up with to fix my problem.
Go to Network Settings in Preferences and take a look at your current settings. If your local router is listed first in the DNS settings, followed by what is most likely your ISP DNS servers then write down the DNS IP addresses, manually delete them and then re-add just the ISP addresses.
I was able to do this on the front page of my "Ethernet" connection in Network Settings. If you are wireless what I did was I had to go to the Advanced section and manually add just the two DNS entries in on the DNS tab. For some reason it would not let me remove the old DNS entries on this page but I put in the duplicate ISP ones anyway and it still fixed the problem.
Hope this helps.
Message was edited by: Doug Putman

Time Capsule Degrades Wireless Internet Connection: Help?

Time Capsule Degrades Wireless Internet Connection: I am in FL using Brighthouse Cable as my internet provider (15MG down). The internet connection speed is slower than a dial up connection when wirelessly connected to my network to my Time Capsule. When I remove the Time Capsule and replace it with Brighthouses Netgear router the internet speed are normal (fast). Additionally, the internet speed is OK when I first hit a website, but the speed degrades rapidly as I access additional web pages. I no longer use my Time Capsule and therefore are not getting my back-up protection. (NOTE: I tried Verizon Fios and had the same problem.) Can anyone help?

Bought the time capsule in Oct 2013. I have a Sagemcom 2864 modem from Bell but used through Teksavvy. The 5 ghz has been flaky until I upgraded to Yosemite 10.10.1 I think. I had a closer look at it and it appears that the wifi is ok. I was thrown off by the wifi symbol being all animated in the menu bar. I was able to ping the time capsule via wifi. All the status lights on the modem looked ok. Next time it happens, I'll see if I can get some more details. Do you know if there's anyway to get some logs from the airport utility?

ITunes 8.1 works great but killed wireless internet connection

I installed version 8.1 on both my laptop( PowerBook g4/ OS 10.4.11) and desktop (imac intel / OS 10.5) and after restarting the computer, the wireless internet connection stopped working on both.
I would open Safari and it would be a blank page and and the circle would keep spinning.
So I tried my laptop at a different wireless hotspot and had the same result.
I then tried repairing permissions and I got a list of problems with iTunes/Network Utilities, they repaired and now when I open Safari I get the message that it can not connect to the internet.
I do get an internet connection using ethernet on both.
Any ideas on how to fix this problem?

Did you by any chance also update the firmware on your Apple Airport Extreme (if that's what you have)?
I thought 8.1 killed my connection to my Apple TV, but it was the faulty firmware (see reports elsewhere in these forums).
Now that I have rolled back from 7.4.1 on my Airport I plan to try iTunes again (with white knuckles).
-dan

I want to listen to my music through my airport express but I also have a wireless internet connection!

I want to listen to my music through my airport express but I also have a wireless internet connection!
I think I might have been sold a jelly - I want to listen to my music wirelessly which is why I bought the Airport Express, but I also have a wireless internet connection - can I do both?

David1854 wrote:
I want to listen to my music through my airport express but I also have a wireless internet connection!
I think I might have been sold a jelly - I want to listen to my music wirelessly which is why I bought the Airport Express, but I also have a wireless internet connection - can I do both?
Do you mean to say you already have a wireless network setup and thought by buying the Airport Express you just could use it for wireless music alone?
The Airport Express is chiefly a wireless router first, with the wireless music and printing as extra's.
It can be used for streaming music alone, but I think it needs to talk to network time servers and thus it gets screwed up over time not being on the internet. Also by your using your computers wifi for music streaming, no internet with your other router.
So it's a all Airport Express or back to a stereo mini cable.

Setting up a Wireless Internet Connection on Solaris 10

I am new to the whole Solaris/unix world and I was just wondering how to set up a wireless internet connection with a solaris 10 machine. I have a linksys router hooked up to a cable modem and a linksys receiver hooked up via USB on the solaris machine. I would greatly appreciate any help anyone can give me.

Was the router supplied by the ISP or was it bought separately? Are you able to get online when connecting the Mac directly to the router via an ethernet cable? Either way it's best to check the router settings to ensure they are correct.
I’ve not come across the Zoom routers. Setup should be straight forward though, having gone to their website and downloaded the manual. Do the following:
1. Plug one end of the RJ-11 cable (included in the box) to the router, the other end to your phone line via the micro-filter.
2. Plug one end of the ethernet cable (again included in the box) to the appropriate port in the router, the other end to your Mac.
3. Plug in the power cord and switch on
4. Fire up your web browser on your Mac (Safari, Camino, Firefox etc)
5. In the address bar of the web browser type 10.0.0.2 and hit the Return button
6. A Network Password box will appear. This is to gain access to the router itself. The defaults are, Username = admin, Password = zoomadsl
7. You’ll now enter the Basic Setup screen. It’s here where you enter the username and password supplied by your ISP. This is NOT your email username/password but your Internet access ones. If you are not sure or don't have them, call your ISP.
8. Click Save Changes and then click Write Settings to Flash and Reboot. Once the router has reset itself and the Link light comes on and remains steady, you’re online.
That’s it. Job done
If you still cannot get access it may be worth resetting the router (there should be a small button in the back which requires the use of a pen or pencil to press) re-entering your ISP information as described above and trying again.
Let me know how you get on.
Kryten

Why do i get a "no service" message when I am around a wireless internet connection

I am again suffering from "no service" on my iphone and again, I'm in a very well connected area so I should not get this message again.

"Wireless internet connection" - i.e. Wi-Fi - is not the same as cellular network connection. You see ""No Service" when the cellular network from your carrier is not available in your location (indoors in particular).

Wireless internet connection is poor, wireless internet connection is poor

Hi..
I just purchase an iMac desktop and dont know much on how to use them. A couple of questions: when i set up the comp, it suggested that i could transfer my data from another computer to this. I clicked yes, followed the promts. It loaded for 4 hours then said it was succsefull. Both on my imac and my laptop. However, i cant find any of my information, photos, documents etc??
Second question is: My wireless internet connection seems to be quite poor? Its slower than what is was on my laptop. I went to apple store, went to poor wirelss conection they wanted my serial number so i did that and it just had the loading symbol for aagggeess and nothing happened? ive tried to call Mac support, it said thats is currently closed but didnt say when they open.
Any help will be appreciated!
Thanks Cait

Hello CAit & welcome!
It loaded for 4 hours then said it was succsefull. Both on my imac and my laptop. However, i cant find any of my information, photos, documents etc??
Look in the Users folder far another/imported ID to log into.
Let's seehow the Wifi is under the other account.

For those who constantly lose their wireless internet connection using WRT54G

Ok I was constantly losing my wireless internet connection on my LAN network when using my laptop, I tried everything to no avail,until today. Heres what I did to solve my problem
1. Upgrade your firmware for the WRT54G to ver.6
2. Reset your wireless router
3. Unplug all cables and wires from your Pc and router
4. Connect your Pc directly to your cable modem and obtain an internet connection
5. Now transfer files you want to keep from your laptop onto a usb flash drive or burn them to a disk
6. Reformat your laptop so that it goes back to all factory settings just like when you bought it
7. When completely done reformatting run software that came with the WRT54G on your desktop pc and follow all instructions,when prompted to type password type the password you last used
8. Go to your laptop and it should pickup a LAN,click connect, it will ask for the encryption key so type it in(whatever you typed when re-installing your wireless router)
Congratulations you are now back up and running,install files saved earlier back on your laptop and enjoy.This is what I did and it solved my problem as a matter of fact i typed this from my laptop and has not dropped my wireless internet connection yet.
NOTE SAVE ANY AND ALL FILES YOU WANT TO KEEP AS REFORMATTING WILL CAUSE YOU TO LOSE DATA!
IAM IN NO WAY RESPONSIBLE FOR ANY ERRORS OR PROBLEMS THIS PROCEDURE COULD CAUSE IF DONE INCORRECTLY!

If you bought a version 5 or 6 return it to where you bought and apply the money towards a WRT54GL v1.x You'll be much happier. You could spend time online rather than pulling your hair out trying to figure out whats wrong. I setup 6 Linux based WRT54G's with no issues before I was given the task of setting up a version 6. Worked for about an hour. Told the guy to return it for a GL. Long story short, set it up in a matter of minutes and he was online. That was 3 weeks ago and he is very happy.

Laserjet 1022 w error to wireless internet connection

I installed my wireless laserjet 1102 w.
It is running, I am able to connect by wireless to the printer and I am able to print but when
I connected to the page of configuration and try to activate the eprint option I receive the message "error to internet connection".
So I am not able to receive the printer code to activate eprint.
My wireless internet connection is correcly running with other wireless devices

Hello guidogio55,
Please take a look at this document, and let me know if the troubleshooting steps help to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Wireless Internet connection slow on MBP, not on 6 yr old Thinkpad

Similar Messages

Maybe you are looking for