Wireless Internet Connection Speed (WRT54GS)

Have three computers. One with a hard line and the other two wireless. One of the wireless has a WVSB54GS USB Network adapter w/ Speed Booster. Well I have no clue what the problem is. My brother use to manage our internet system and he has gone off to college leaving me w/ this mess. My computer has a wireless internet card and the speed use to always be at 120 Mbps, now though it rebounds back and forth and lately it keeps at 48.0 Mbps and sometimes it just all out fails to 1.0 Mbps. The other computer w/ the USB adapter has always had a crappy speed of about 54.0 Mbps and I would really like to fix this.
Any ideas what happened to degrade my speed so much? Could I have accidentally screwed something up when I was messing w/ it previously? The one w/ the USB adapter consistently looses it's access point or when it has it cannot find the internet yet the other two don't have any problems. So I have to reset my modem/router/computer a lot till it finds it again.
Any Help or Info is greatly appreciated

There are many causes for poor wireless connections. And there are many cures:
First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
Hope this helps.
Message Edited by toomanydonuts on 07-25-2007 12:40 AM

Similar Messages

For those who constantly lose their wireless internet connection using WRT54G

Ok I was constantly losing my wireless internet connection on my LAN network when using my laptop, I tried everything to no avail,until today. Heres what I did to solve my problem
1. Upgrade your firmware for the WRT54G to ver.6
2. Reset your wireless router
3. Unplug all cables and wires from your Pc and router
4. Connect your Pc directly to your cable modem and obtain an internet connection
5. Now transfer files you want to keep from your laptop onto a usb flash drive or burn them to a disk
6. Reformat your laptop so that it goes back to all factory settings just like when you bought it
7. When completely done reformatting run software that came with the WRT54G on your desktop pc and follow all instructions,when prompted to type password type the password you last used
8. Go to your laptop and it should pickup a LAN,click connect, it will ask for the encryption key so type it in(whatever you typed when re-installing your wireless router)
Congratulations you are now back up and running,install files saved earlier back on your laptop and enjoy.This is what I did and it solved my problem as a matter of fact i typed this from my laptop and has not dropped my wireless internet connection yet.
NOTE SAVE ANY AND ALL FILES YOU WANT TO KEEP AS REFORMATTING WILL CAUSE YOU TO LOSE DATA!
IAM IN NO WAY RESPONSIBLE FOR ANY ERRORS OR PROBLEMS THIS PROCEDURE COULD CAUSE IF DONE INCORRECTLY!

If you bought a version 5 or 6 return it to where you bought and apply the money towards a WRT54GL v1.x You'll be much happier. You could spend time online rather than pulling your hair out trying to figure out whats wrong. I setup 6 Linux based WRT54G's with no issues before I was given the task of setting up a version 6. Worked for about an hour. Told the guy to return it for a GL. Long story short, set it up in a matter of minutes and he was online. That was 3 weeks ago and he is very happy.

Please, help me to set up wireless Internet connection. M...

Please, help me to set up wireless Internet connection. My router is WRT54GS. I able to get online when computer is wired direct to VPN internet cable.
First, I can’t open password request screen on http://192.168.1.1.
Second, when "Setup wizard" runs step #6 (“Check the router’s status”), the program asks for the password. Default password “admin” is rejected by the program and I can’t install Linksys software. Just in case I already pressed reset switch on the back of the router but to no avail.
Third, I don’t find out my Ethernet Adapter Wireless Network Connection and correct router’s IP address using ipconfig/all command after connecting WRT54GS with my computer. Ethernet adapter: DHCP disabled, subnet mask 255.255.255.0, IP address 10.32.132.193, default gate 10.32.132.1.
Tell me please: what’s the matter?

Pensive wrote:
Please, help me to set up wireless Internet connection. My router is WRT54GS. I able to get online when computer is wired direct to VPN internet cable.
First, I can’t open password request screen on http://192.168.1.1.
Second, when "Setup wizard" runs step #6 (“Check the router’s status”), the program asks for the password. Default password “admin” is rejected by the program and I can’t install Linksys software. Just in case I already pressed reset switch on the back of the router but to no avail.
Third, I don’t find out my Ethernet Adapter Wireless Network Connection and correct router’s IP address using ipconfig/all command after connecting WRT54GS with my computer. Ethernet adapter: DHCP disabled, subnet mask 255.255.255.0, IP address 10.32.132.193, default gate 10.32.132.1.
Tell me please: what’s the matter?
hi pensive ,
Seems interesting , first do this - push the reset button on the back of router .
push it till 30 seconds , unplug the power cable and plug in the power cable back in After completion of 30 seconds.
then try to log into , 192.168.1.1 again . with the password "admin".
see if it reply?
Else -
strt>cmd>ipconfig /all - post the result ?
pe@c3
Message Edited by meteor on 01-09-2008 05:58 AM
~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

Wireless Internet Connection Slow

Whenever I access the internet on my Mini, the speed is slower than my other wireless internet connections on my PCs. Whenever I click a link or type in a URL to go to, it takes awhile for it to connect to the site (in the status bar, it will be stuck on the "Looking up -url-" for a bit); once it is connected, it loads fairly fast.
However, using the same wireless internet network, the internet speed on my PC computers are significantly faster. Is there a way to solve this speed issue? I've gotten used to it somewhat, it would just be nicer if it was the normal, faster speed that it's supposed to be.
-My ISP is Comcast
-I use Airport Extreme to connect to the wireless network

Might be a DNS issue, like we are talking about in this other thread:
http://discussions.apple.com/thread.jspa?threadID=1619004&tstart=0
If the DNS is misconfigured, the PCs may have different timeout threshholds from the Mac, and perhaps they jump to the next DNS quicker than the Mac does.
Anytime you see lots of "looking up" messages, it's a good bet the DNSes are not configured right.

Slow wireless internet connection using airport extreme

My wireless internet connection works but is very slow (<80kbs). The problem seems to be with the airport extreme (brand new, purchased in May 07) because my connection is very fast (>6mbs) when i connect by wire to the airport extreme base station. Signal strength is strong, so i can't figure out the problem. Any ideas?
imac Mac OS X (10.4)

BK37, I hope you've solved your problem by now. But if not, and for the benefit of others reading this post, let me share what I (finally) discovered when I had virtually the same problem, i.e. 8mbps wired speed, <50kbps wireless speed.
I tried literally <span style="font-style:italic;">every suggestion I could find in the Airport discussions. First, I can assure you that changing the channel can give you incremental speed improvements in some instances, but for radical drops like yours, it's not the answer. Nor is turning off ipv6, or changing to WEP, or turning off Remote Access, or moving the AEBS, or or or or or....
With such a radical drop in speed, it's most likely you have a hardware-related blockage somewhere. In my case it was my wiring configuration. My setup was France Telecom Livebox (ADSL modem / ethernet & 802.11g router) --> Ethernet cable --> Linksys RTP 3100 IP phone adapter / router --> Ethernet cable --> AEBS --> 3 Airport Express set up to extend network and run AirTunes. After eliminating every other possible problem, I narrowed it down to the Linksys router, which for reasons I have yet to figure out was trapping the speed to the AEBS. I ethernet cabled both the Linksys router and the AEBS directly to the Livebox and presto! Back to blazing speed.
Hopefully this info will be helpful to you or some poor soul in the same situation, as I would have loved to have had it myself before I pulled every hair out of my head!
iMac 21" Intel Mac OS X (10.4.9)

Extending a wireless internet connection to another part of a building

We have a wrt54g wireless router connected to a quest dsl modem. we now want a wireless internet connection in another part of the building which is out of range of the wrt54g. the two areas are about 200 ft apart and i can run a cat5 cable to new area. Can i install a second wrt54g in the new area and how exactly do i configure it for security and connectivity.
Thanks
Gary

Yes, you can do what you described. You can run cat5 cable if you want, but it will need to be very high quality (i.e. professional grade) cat5 cable installation to make a 200 foot connection. If you are doing this yourself, I would suggest you start with good quality cat5e cable for such a long run. And make sure the cat5e connection works before you string the cable.
You will also need to convert the second router to a WAP (wireless access point), by making a few simple setting changes.
For instructions on setting up your system, see my post at:
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=108928
Message Edited by toomanydonuts on 05-01-2009 04:23 AM

Time Capsule Degrades Wireless Internet Connection: Help?

Time Capsule Degrades Wireless Internet Connection: I am in FL using Brighthouse Cable as my internet provider (15MG down). The internet connection speed is slower than a dial up connection when wirelessly connected to my network to my Time Capsule. When I remove the Time Capsule and replace it with Brighthouses Netgear router the internet speed are normal (fast). Additionally, the internet speed is OK when I first hit a website, but the speed degrades rapidly as I access additional web pages. I no longer use my Time Capsule and therefore are not getting my back-up protection. (NOTE: I tried Verizon Fios and had the same problem.) Can anyone help?

Bought the time capsule in Oct 2013. I have a Sagemcom 2864 modem from Bell but used through Teksavvy. The 5 ghz has been flaky until I upgraded to Yosemite 10.10.1 I think. I had a closer look at it and it appears that the wifi is ok. I was thrown off by the wifi symbol being all animated in the menu bar. I was able to ping the time capsule via wifi. All the status lights on the modem looked ok. Next time it happens, I'll see if I can get some more details. Do you know if there's anyway to get some logs from the airport utility?

ITunes 8.1 works great but killed wireless internet connection

I installed version 8.1 on both my laptop( PowerBook g4/ OS 10.4.11) and desktop (imac intel / OS 10.5) and after restarting the computer, the wireless internet connection stopped working on both.
I would open Safari and it would be a blank page and and the circle would keep spinning.
So I tried my laptop at a different wireless hotspot and had the same result.
I then tried repairing permissions and I got a list of problems with iTunes/Network Utilities, they repaired and now when I open Safari I get the message that it can not connect to the internet.
I do get an internet connection using ethernet on both.
Any ideas on how to fix this problem?

Did you by any chance also update the firmware on your Apple Airport Extreme (if that's what you have)?
I thought 8.1 killed my connection to my Apple TV, but it was the faulty firmware (see reports elsewhere in these forums).
Now that I have rolled back from 7.4.1 on my Airport I plan to try iTunes again (with white knuckles).
-dan

IMAC Wireless Internet Connection Problems All Of A Sudden

My Imac is well over a year and a bit old and has been able to connect to my wireless internet connection absolutely fine until the past week and a half. At first the connection wouldn't work and when I would turn my airport on and off and reset the router, it would eventually work, now that is not working at all. My airport status is either showing 'airport is turned on but is not connected to a network' or 'airport has a self-assigned ip address and may not be able to connect to the internet'
I have formatted my imac twice and still no avail and the last format I tried to join wirelessly straight from boot but it wouldn't join saying 'there is a problem with the wireless connection and you're not connected to the internet.' the annoying thing is I can see the network sitting there and can't join it, my network is also unsecure so no need to input a password. All my home PC's and my Iphone and Blackberry find the network easily enough, although recently the Iphone has began showing only 1 bar of wifi connection.
I am at my wits end as I am unable to connect at all now, I am all out of ideas and have been bashing my head off a wall for the past day without any connection at all.
My router is a buffalo AirStation wireless G high power model, my IMAC is an intel core 2 duo 20", if you need anymore information of my hardware I will gladly provide it. I'm running MAC OSX Leopard 10.5, out the box as I've been unable to run any software updates as I can't connect to the internet.
Please, if anyone can shed any light at all on this issue I would definately try anything.
Thanks in advance and regards.
Message was edited by: proxykillah

Anytime you see a self-assigned IP address in your network prefs you know it surely is a problem
with your router configuration. Power down all equip ... make sure modem is off for at least 5 minutes
restart modem, restart iMac ... check your network pref on iMac and make sure it's not 169.x.x.x
If so you will need to recapture the settings from your ISP's modem to the Buffalo.
Always use a secure wireless connection (WEP, WPA, WPA2) or else the whole neighborhood will suck down your bandwidth the slow down what your paying for. I use Time Capsules or AEBS (Airport Extreme Base Stations) that allow you to stealth mode and lower signal output and make the device
as a "closed network" ... meaning no one else can see and tap into your WIFI home network!
802.11N is better than G. and especially when you can use dual bands 2.4 / 5GHz to stop various home interferences. The backup of Time Machine only makes life much easier also! Xtech

Slow Internet Connection Speeds caused by Ethernet Controller Driver

Problem: Internet connection speeds are 1/10 of available connection speed.
1. Problem statement is based on running speed tests at cnet, speedtest.net, and AT&T.
2. I am paying for 12 MBps down load speed but I only get about 1.5 MBps.
3. Other computers in household get 11+ MBps connected to the same ethernet cable and also different ethernet cables.
4. I traced the problem to the network controller driver.
5. I updated to the latest driver with no change in performance.
6. After some experimenting I found that if I re-install the driver after the computer is booted up, the internet connection down load speeds increase to 11+ MBpS (typically around 11.4 with maximum capability of 12)
I have assumed that the driver does not load properly the first time, but why? Or is there some other cause or setting that I have overlooked?
Board: MSI Z77A-G43
Bios: Version 2.0
Ethernet Controller: RealTek RTL8168B PCIe GBE Family Controller
Ethernet Controller Driver: 7.65.1025.2012
VGA: NVIDIA GeForce GTX 550 Ti
PSU: Raidmax RX630Z 630W
Intel Core i7-2700K Sandy Bridge 3.5GHz LGA 1155 95W
MEM: 4x4gb
HDD (Primary): Western Digital WD5000HHTZ-04N21V0 500MB
HDD (Secondary): Hitachi Deskstar HDS723020BLA642 2TB
OS: Windows 7 64bit Professional

Have you installed all of the most recent drivers:
http://www.msi.com/product/mb/Z77A-G43.html#/?div=Driver&os=Win7%2064
There is also an realtek firmware update included in the latest bios:
>>Beta BIOSes<<
2.8 is the latest official & there are two newer beta bios's there as well.

Firefox won't detect coffee shop wireless internet connection, but explorer will, automatically

Firefox won't detect coffee shop wireless internet connection, but explorer will, automatically

that's fine, thank you
but if it doesn't connect
what's the alternative procedure
what do I do

I want to listen to my music through my airport express but I also have a wireless internet connection!

I want to listen to my music through my airport express but I also have a wireless internet connection!
I think I might have been sold a jelly - I want to listen to my music wirelessly which is why I bought the Airport Express, but I also have a wireless internet connection - can I do both?

David1854 wrote:
I want to listen to my music through my airport express but I also have a wireless internet connection!
I think I might have been sold a jelly - I want to listen to my music wirelessly which is why I bought the Airport Express, but I also have a wireless internet connection - can I do both?
Do you mean to say you already have a wireless network setup and thought by buying the Airport Express you just could use it for wireless music alone?
The Airport Express is chiefly a wireless router first, with the wireless music and printing as extra's.
It can be used for streaming music alone, but I think it needs to talk to network time servers and thus it gets screwed up over time not being on the internet. Also by your using your computers wifi for music streaming, no internet with your other router.
So it's a all Airport Express or back to a stereo mini cable.

There is an icon in the upper right hand corner about test your internet connection speed. is this malware

''locking - dupe of https://support.mozilla.org/en-US/questions/976623''
there is an icon in the upper right hand corner about test your internet connection speed. is this malware

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Setting up a Wireless Internet Connection on Solaris 10

I am new to the whole Solaris/unix world and I was just wondering how to set up a wireless internet connection with a solaris 10 machine. I have a linksys router hooked up to a cable modem and a linksys receiver hooked up via USB on the solaris machine. I would greatly appreciate any help anyone can give me.

Was the router supplied by the ISP or was it bought separately? Are you able to get online when connecting the Mac directly to the router via an ethernet cable? Either way it's best to check the router settings to ensure they are correct.
I’ve not come across the Zoom routers. Setup should be straight forward though, having gone to their website and downloaded the manual. Do the following:
1. Plug one end of the RJ-11 cable (included in the box) to the router, the other end to your phone line via the micro-filter.
2. Plug one end of the ethernet cable (again included in the box) to the appropriate port in the router, the other end to your Mac.
3. Plug in the power cord and switch on
4. Fire up your web browser on your Mac (Safari, Camino, Firefox etc)
5. In the address bar of the web browser type 10.0.0.2 and hit the Return button
6. A Network Password box will appear. This is to gain access to the router itself. The defaults are, Username = admin, Password = zoomadsl
7. You’ll now enter the Basic Setup screen. It’s here where you enter the username and password supplied by your ISP. This is NOT your email username/password but your Internet access ones. If you are not sure or don't have them, call your ISP.
8. Click Save Changes and then click Write Settings to Flash and Reboot. Once the router has reset itself and the Link light comes on and remains steady, you’re online.
That’s it. Job done
If you still cannot get access it may be worth resetting the router (there should be a small button in the back which requires the use of a pen or pencil to press) re-entering your ISP information as described above and trying again.
Let me know how you get on.
Kryten

I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later

Wireless Internet Connection Speed (WRT54GS)

Similar Messages

Maybe you are looking for