Wireless Internet Service

I recently purchased a Inspiron 1750 Laptop Computer with Windows 7, but I'm unable to install or even register to the Wi-Fi Service through Verizon. I was initially told when I signed up for service that wi-fi would be available to me but it is not.

The Verizon wireless service is not yet available everywhere. The following link will show you if it is available in your location.
http://www22.verizon.com/Residential/WiFi/
Javier
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

Similar Messages

I'm on a DD-WRT wireless internet service. Could this be causing my iMac to act weird ?

I'm on a DD-WRT wireless internet service. Could this network be causing my iMac to act weird ?

From reading this site and others, looks as if there could be thousands of possiblities/remedies.
I agree. Aside from the very remote possibility that running Java for that "trusted" website allowed some kind of infection--and if it was some kind of exploit, I doubt it would manifest itself in any way you'd notice--there are just too many different things going on for me to give any help.
Why were you thinking it was the router/DD-WRT? What if you connect directly by Ethernet?
Some generic thrings to try.
See if a Safe Boot helps. Shift at the startup chime and give it much longer to boot than normal. Don't open anything, leave it a minute or two and then restart normally.
SMC reset
http://support.apple.com/kb/ht3964
You could try the shotgun approach and reinstall, but first you must be certain to have a completely reliable backup, in case you need to restore.

Wireless internet service when wifi not available

I have AT&T wireless service and I'm wondering if there are any devices that work with AT&T to give my MacBook Pro wireless internet access when wifi isn't available. Or is there any way I can accomplish the same thing through my iPhone (I've got a 3GS on order).
Thanks,
Rob

The iPhone service is called "tethering" and will be supported by AT&T later in the year - it will be an extra charge. AT&T also offers USB and ExpressCard broadband modems which will do the same thing without using your iPhone - again, though, they charge additional data charges over and above your iPhone data charge.
Matt

Connect HP touchpad onto schoolwide wireless internet service

i need to be able to log onto a WPA2 Enterprise network, but the options are either WPA or Enterprise. any way to add more options?
Post relates to: HP TouchPad (WiFi)

Bump. I've seen posts on this forum with regard to similar topics (like not being able to connect to Penn's wireless, etc).
My school doesn't use any fancy wireless. My iphone, ipod, macbook, and pc laptop can all connect to this wireless painlessly. Why is the HP TouchPad the only device requesting a certificate? I emailed myself the certificate that was on my macbook, but that didn't help.
Does anyone have a solution for this yet? This is TouchPad specific. It's not the WiFi that's "wrong" in this scenario. What do we change on the TouchPad?

IPod won't connect to my wireless internet service I am using a Motorola Modem and router gateway SBG901

You can try the following. However, there might be something wrong/incorrectly set up with the wifi.
- Reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset network settings: )(Settings>General>Reset>Reset Network Settings
- iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

[SOLVED] Wireless internet connection problem during installation

Hi to everyone!
I ask you a help in activating my wireless connection.
I tried to install from the recent ISO (201208 - via CD)
but I found some problems in activating a wireless connection in the first steps
of the installation guide.
My laptop is a Hp pavilion dv5 1020-el, with an Intel wireless 5100AGN internal interface.
So I did:
1) iwconfig to see my devices and the system detects my wlan0.
2) followed the Wireless_Setup page from wiki to set it
3) used wpa_supplicant and passphrase to set my ESSID name and wpa key.
4) iwconfig then showed wlan0 associated with my ESSID, with Power ON and Encryption OFF.
I could not try a connection via ping command.
Even wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf did not work.
Maybe the problem is with Encryption OFF.
Thanks for your attention!
EDIT:
I solved this way,connecting to an open wireless open network:
1.(from boot) I created a profile in /etc/network.d/ from /etc/network.d/examples
2. started a # netcfg 'my_ESSID'
3. # ping -c 3 www.google.com
All is ok! I can install Arch Linux from my smartphone as a router.
But I couldn't connect to a WPA protected wireless network yet.
Last edited by spinaluc (2012-08-18 13:08:15)

Thanks to everyone who responded to my question. The company who provides the wireless internet service to my apartment complex moved the antenna next to my unit and claims he boosted the power. As the saying goes, "The squeaky wheel gets the grease". I complained almost daily to the apartment manager and she, in turn, griped to the provider which eventually led to the "solution" above. Using Skype is still shaky as the person I'm calling isn't always able to make out what I am saying. So, I use Skype only when I REALLY need to make a phone call. Even though none of your suggestions solved my problem, I am still very, very grateful to all of you who tried. Thank you very, very much! -- Matt

Connecting my PDA Palm TX to Verizon wireless internet

I have a PDa Palm TX and recently switched internet service from Comcast to Verizon. I can't connect to my Verizon wireless internet service. I do not know which secuirty key setup I need. Can someone please give me instructions on connecting to Verizon internet. I have a wireless router and it works fine with my two laptop computers. Thanks!

Connecting to the internet with your TX should have nothing to do with switching from Comcast to Verizon, but rather the type of security you (or someone else) set on your wireless router. Also, some types of routers won't work with the TX. Check the "stickied" thread near the top of this board for tips and "how-to's" about wireless networking issues.
If you don't know how to get into your router settings to check them there, you should be able to see the security settings on your laptop by checking the Network settings.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

My situation is two separate buildings 100 feet apart. can time capsule provide wireless internet in both?

can time capsule provide wireless internet service between two homes 100 feet apart?

OK.. starting to get the picture..
You should have run ethernet between the two buildings not cable.
Does the cable for the second building start inside your house.. ie do you have a termination for cable or does the second building come in directly from the street.
If you have cable link between the two buildings you can buy ethernet to cable adapters.. plug one it at each end and simply extend by plugging it into the router on the main cable link.. simple and far superior to wireless.
Otherwise you need to work out what kind of budget you want to spend to do this..
You can buy professional or semi-pro stuff from companies like ubiquiti which are far superior to domestic wireless link.. or if you want to do it on the cheap figure out what is the min speed you can live with.
I can give you instructions for using a pair of old airport.. in WDS.. or new ones.. but the new ones will cost far more and no gain.. you can usually pick up the old discus ones for $10 on ebay and they work great.
But don't try to do it without a link.. ie a specific set of AP in one house plus repeater in the other. As anything you do without making a link will just fall down or become unreliable.
You must have a pair of matched items.. You want to do this with WDS.. and you want something with good range. If you want N wireless that is fine.. but buy a pair of N wireless routers that can do WDS with full WPA2 security. eg full N wireless edimax stuff is not bad. TP-Link also not bad.. but if you want to run airplay and bonjour etc.. anything apple network then stick to apple. You will find that non-apple wireless routers will often not work with apple specific protocols.. as they are just that.. non-specified.

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

We traded our home internet service for a Sprint Hot Spot. The hot spot does not have an ethernet port to connect through. Can we connect our time capsule to the wireless hot spot?

Hello, we switched our home internet service from an ethernet modem to a wireless hot spot.
Do you know if there is a way to connect our time capsule to the hot spot?
Everything I read only suggests connecting through an ethernet cable. I'm hoping there is a way to do this.
Any help would be appreciated!
Thanks!!!

No you can't join a wireless hotspot with a Time Capsule directly via it's 'join' option (tried and failed - well to be exact it kinda works but the Time Capsule's ethernet ports no longer work).
What you can do is buy an airport express and use it's 'join' option to connect to the iPhone's hotspot. Then you connect the airport express via ethernet to the time capsule (in bridge-mode).
You can then connect your computers to the time capsule via ethernet or use it's wireless function to set up wireless network (with a different name to that of the hotspot) that your wifi stuff can connect to.
Thingi

I have a Airport Extreme that is dropping the wireless signal alot (several times a day). The green light will go amber but the internet service (ethernet cable) will still be fine. The wireless icon on devices with go away.

I have a Airport Extreme that is dropping the wireless signal alot (several times a day) The green light will go amber, but the internet service is still ok if your using an ethernet cable directly plugged in. When the light goes amber all devices that is using wireless will lose there wireless icon. The only way to get the green light back is to unplug the Airport device and replug it back in. I tried the reset on the back but still no luck. What is the fix?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

Best wireless modem/router for Comcast internet service?

Hello!
I am looking to switch internet service from Verizon DSL to Comcast. I have a MacBook Pro using Airport Extreme (supports 802.11 a/b/g/n), and my other computer is an iMac (OS 10.5.8, iMac 6,1), with a printer and a Roku box (I'm also thinking about switching to Apple TV). All are currently set-up wirelessly with a combined modem/router.
I know that there is a list of a bunch of potentials on the Comcast website, but I'm looking for real experience from Mac users. Good, bad or neutral comments are appreciated.
Thank you!
Ken

Don't pay Comcast monthly for a router. Buy a router. A router is a router, the best routers are Cisco based rackmount devices. Honestly the AirPort Express and Extreme are amazing and work quite well with Apple products. Plus if you purchase one and get AppleCare on it you get AWESOME support from your friendly AppleCare advisors... sure as **** beats going to India and talking to Fred.

Separate Internet service for Guest Wireless

Hi all,
I was reading about security concerns having guest wireless sharing the corporate Internet services and therefore looking towards the path where a separate basic Internet serivce can be provided for them keeping the corporate side safe.
In doing that what i was thinking would be the way:
Extend the Guest Wireless VLAN from the core switch where the SVI is currently at to the new ADSL router's Inside interface. And in doing that I will need to configure the ADSL router for the right DHCP scope and DNS entries and finally remove the SVI from the core switch so it simple does switching across to this ADSL service.
Let me know if i am on the right track or if i am missing something.
Regards!

Hi George,
it is a simple setup with just one controller. and the WLC is talking to the ISE to authenticate including the web auth login for the guest.
So to ans your Q, i think No, the WLC deosnt push the guest to the DMZ. the guest VLAN is hanging off the core switch at the moment. and using their corporate Internet service.
i hope the above answered your doubts. Cheers!

Why do i get a "no service" message when I am around a wireless internet connection

I am again suffering from "no service" on my iphone and again, I'm in a very well connected area so I should not get this message again.

"Wireless internet connection" - i.e. Wi-Fi - is not the same as cellular network connection. You see ""No Service" when the cellular network from your carrier is not available in your location (indoors in particular).

I recently upgraded my internet service with Comcast for faster internet. When I user ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed. I have an airport extreme...3-4 years old. Why?

I recently upgraded my internet service with Comcast for faster internet. When I use an ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed. I have an airport extreme...3-4 years old. Why is the speed so different and are there settings I can change to increase the wireless speed?

If your supposed to be getting 20 Mb/s down via your ISP and both Mac's are not getting that on the SpeedTest, then obviously your router appears to be the cause.
Connect one Mac directly to the ISP's modem, power off/wait 30 seconds/then power on, then power on the Mac. The ISP will connect directly to the Mac, then run a SpeedTest.
Then repeat the same for the other Mac. If both Mac's have a problem then it's possibly the ISP, the modem, your lines to them or on your property, or both Mac's are messed up.
You'll have to keep searching for the cause. Call your ISP and ask then to run a test to see if your getting your 20 Mb/s to your modem, that should clear part of the problem.
Diagnosing network issues

Wireless Internet Service

Similar Messages

Maybe you are looking for