Wireless IP Phone 7926G Showing active Load ID as Unknown

Dear All,
I am running Cisco call manager 8.6[.2.23900-10].
The issue is that Cisco wireless IP phone 7926G showing its Active Load ID as Unknown on call manager.
But its showing perfect [CP7926G-1.4.5SR1.3] on device.
Please guide me to fix this issue
Please find the attached screen shots

I rebooted the call manager Cluster after installing the firmware also.
But still call manager showing active Load ID as Unknown.

Similar Messages

After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?

After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?

Thank you ProjectVRD. But this has not soloved the problem. It still shows no service even with my sim card well inserted. Even tried using sim card of another service provider thinking the problem could be from the service provider, it wasnt working still. PLEASE APPLE HELP ME.................

Generate Active load report for Cisco IP Phones

Hello All,
We have a cluster contains around 24,000 IP phones, and we have a migration very close so we want to get the report of the phones whichever running with the old phone firmware.
Our current active load should be : SCCP42.9-3-1SR2-1S
So please let me know, is there any way me to run a report and get the details of the active load for all the phones ?
Thanks.

I believe the solutions below will address your concerns.
    The PC that is daisy chained to the IP phone could capture the mac adresses by the attacker reading it physically on the IP phone and then set the pc network port to that mac address.The attacker could then configure its own verified MAC adress on a loopback interface, thus the PC would be able to access both its Data VLAN and the former IP Phones Voice VLAN.
    And since the link between the Switch and the IP Phone acts like a trunk link VLAN hopping can occur.
********To prevent the end user from reading the mac address on the bottom of the phone, you could physically remove the mac label. To prevent the end user from seeing the mac via the phone display, you would disable the Setting access setting the in the phone configuration in call manager, which would prohibit access to the settings button on the phone.
    Another attack vector would be a Cisco switch configured for CDP and configured with the same MAC address as either the IP Phone or the PC. The attacker could then gain ciritical information about the state of the Corporate switch. In order for this to work the switch would need to have STP disabled so no BPDU would get broadcasted.
***********In this scenario, you could leave stp enabled, but enable bpdu guard on the port, then if it receives any bpdus, it could place the port in err-disable state.*************
    The final attack I can think of is that the PC launches a Double VLAN tagging assault by tagging its packet as the Voice VLAN and then encapsulating the desired attack VLAN inside than Voice VLAN tag.
*************To prevent double vlan tagging by the pc, you would disable the pc voice vlan for the phones within the call manager.***********
Hope this helps.

I just changed my number on line but my previous number is still showing on my phone and is active. What do I need to do?

I just changed my number on line but my previous number is still showing on my phone and is active. What do I need to do?
Thanks.

Alanf356,
You've reached the right place for help! Once the mobile number is changed, you must activate the new number on your phone. Depending on the model phone you have, you may have to simply reboot your device. If a 3G phone, you may dial *228 (send) and select option number one to activate.
Once completed dial #832 (send) to place a test call and ensure that new number is activated. Let us know if this helps.
EfrainM_VZW
Follow us on Twitter @VZWSupport

I get mail on my phone but not on my computor, all it shows is loading mail and nothing happens

i get mail on my phone but not on my computor, all it shows is loading mail and nothing happens

Hello,
On the POP account it sounds like you have this checked...
Mail>Preferences>Accounts>POP Account>Advanced tab>Remove copy from Server after downloading.

Irecently upgraded my Iphone 3GS from 4.1 to 6.0 using Itunes. Now its showing me message that the phone cannot be activated. What can i do ?

Irecently upgraded my Iphone 3GS from 4.1 to 6.0 using Itunes. Now its showing me message that the phone cannot be activated. What can i do ? The phone was Jail Br

iPhones can be unlocked in the U.S. as well and in a number of countries - by the carrier the iPhone was sold as carrier locked with, which doesn't require an Apple store and has nothing whatsoever to do with hacking an iPhone.
Hacking an iPhone is against the iOS license agreement, which you have violated.
If you think upgrading an iPhone isn't easy, I feel sorry for you. Upgrading an iPhone that hasn't been hacked to be unlocked or for any other reason is easy, but hacking as you have done can and does cause problems - you have severely altered the operating system making the iPhone as insecure as that swiss cheese for security garbage that is Windows and Android just for starters.
Dropping back in the market to Nokia and Microslop?
Wrong, and too funny, but thanks for my laugh for the day.

HT4623 i download and install ios 7.0.4 on my iphone 4 , after restart phone , it show me an error about activation failed , what can i do?

i download and install ios 7.0.4 on my iphone 4 , after restart phone , it show me an error about activation failed , what can i do?

Hi forbiddenboy!
Here is an article for you that will help you troubleshoot iPhone activation issues:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Thanks for coming to the Apple Support Communities!
Regards,
Braden

HT1414 It has some problem about my iphone. When I turn off the phone and then turn on, it shows the screen of apple page and then show the loading page many times. What happen with my iphone?

I have iphone5s and there is some problem about my iphone. I turn off the phone and then I turn on. After I turned on, It showed the page of apple signal and then the page of loading. It used long time to show the loading page. Then it was back to page of apple and then loading page again many times. What happen with it? And what should I do?

Did you already try to reset the phone again by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
If this does not work, try to set it up as new device, explained here:
How to back up your data and set up as a new device
You may have to connect in recovery mode, if the phone is not recognized in iTunes:
iOS: Unable to update or restore

I changed my Appleid online yesterday because the old one was based on an email address that is no longer active. My phone still shows the old Appleid and will not let me access APP store etc. How can I get the phone to accept the new ID?

I channged my Appleid at appleid.com and now the phone stills shows my old id and will not let apps that require id/password prompts work.

Just scroll to the bottom of the screen in the store, log out and then login with the new ID.
As long as you changed it from the manage account option at https://appleid.apple.com/ (ie. replaced the primary email address with a new one), then all your old purchases should be fine.

How to read and input Chinese through Blackberry wireless cell phone

The way to read and input Chinese through Blackberry wireless cell phone
My phone model is Blackberry 8520.
My Blackberry can read and input Chinese after these steps.
1. Go to the weblink http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. Click "China Mobile Peoples Telephone" included in "Asia Pacific".
3.Select a product from the drop down menu, for example, mine is BlackBerry 8520, and I select it.
4.Click "next"
5.Then select the "Download Software" on thebottom of the same webpage.
6.Fill in all the information required on the following page, then "Next"
7. Start download the software to you PC, computer or laptop.
8.Install this downloaded software to your PC. The software is called "8520wifijEastAsia_PBr4.6.1_rel424_PL4.2.0.122_A4.6.1.286_China_Mobile_Hong_Kong_Co._Ltd"
9.Link your wireless cell phone to your PC
10.Then go to C:\Program Files\Common Files\Research In Motion\AppLoader
11. Double click "Loader"
12. Select all the languages you want to update to your cell, and then follow the information to the left steps.
It will take about 20 minutes after Step 12 to finish the upload to the cell.
Done.
Now I am happy I can read and input both English and Chinese through my BlackBerry.
If you have any questions, please leave message to me on this web.
Good luck.
Grace

Hi Grace,
I'd faced the same issue as KU.
After all the installation.. it does not have any options for me to choose for the language.. can kindly assist me on this???
it only showed those applications that i had in my mobile...
Thanks
-fei-

TS4429 i updated ios of 3gs and now my phone is not activating

I have just updated my iphone 3gs to 6.1.1. When my phone get restart, it showed activating your iphone but it shows no service at service provider..... afetr this it shows try again.... now tell me what to do??????

I wouldnt update the phone. the software is to advanced for that phone, try taking it into an apple store.
Thanks

HT1414 C apple i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US. I m at india k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!

C Apple, i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US..after long waiting. I m from south india, living at God's country called Kerala k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!
means.. in simple words, it is trying to activate and all( searching wifi,, taking few minutes..again searching...if it couldnt find any wifi - telling .. try connect using itunes an all)...well any way. finally I try connect to a wifi network, with full speed...3mbps..from Ravi's internet cafe in downtown.
All after Im getting the below message from that white candy box!( thats all I can use now, because, in my dreams iPhone is something great, that mankind ever seen....but this really disappointed me......im simpling blinking!!(same with itunes too)
""Your iphone could not be activated because the activation server is temporarily unavailable. try connecting your iphone to itunes to activate it, or try again in a couple of minutes.
If this problem persists, contact apple support at apple.com/support""
EVERYDAY .EVERTIME.. I C this message and sleep....no use.....and i use to charge that 'white candy box' to c this message!
I try searching internet and all for solutn...but no one knw about it..but there are...some one me abt method called jailbreaking ..rednw..white snw ..ultrasnw and all...I dnt knw why it is so complicated to troublesht...apple is suppose to be simple and friendly.
C why u manufacturing these stuffz like this, if does'nt serve the any of its purpose ....or useable to any of its features atleast....C i wont be that disapppointed, if u put an option to playbck music or video during activation and all...
If you are responsible for manfacturing such unuseable thing, then its ur responsible to destroy it too.....
anyway now everyone knws that ..I have an apple iphone with me, but that doest make me proud at all...
Finally I have only few questions to ask...
1 will it work with my vodafone sim in kerala?
2 is any way , i can hear any music out frm it?
3 will i become a proud iPhone user?
I am already fedup with asking questions..begging for an solution.....
I hope so you can help to figure it out, without any complications....thank u!

It was not legitimately unlocked by the carrier it was originally locked to. ONLY the carrier it is locked to can authorize unlocking it.
In order to allow it to be used on a different carrier, the phone was hacked or jailbroken. An unauthorized modification was made to the phone. That modification has damaged the phone. You can not get support for it here or from Apple.

Iphone 3gs shows activation required, hocked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

iphone 3gs shows activation required, hooked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

Instructions to get the phone back working temporary.. till there is a real fix.
1. turn off the phone
2. fire up iTunes
3. press and hold the home button, plug in the cable, hold till you get to see the recovery mode
4. iTunes will the allow to choose restore the phone back to 5.0.1 ( no other choice)
5. iTunes will then ask you to choose which previous backup to would like to recover.
(note: please do not reboot your phone unless necessary, i realize at times after reboot, it goes back to sq1)

Phone numbers show up in messages instead of names

I just got a new ipad Air. When I go into text messages only the phone number shows up instead of the name. Does anyone know how to fix this?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

HT1311 My phone number shows a different number in the contacts page instead of mine,how do I change it?

My phone number shows a different number in the contacts my number section. How do I change it as I cannot even load airtime

You need to set up the accounts in System Preferences/Accounts, then activate Fast User Switching.
That way you can quickly log in to your own account - then back to his.
You should obviously have different passwords.

Wireless IP Phone 7926G Showing active Load ID as Unknown

Similar Messages

Maybe you are looking for