Wireless keyboard 5187URF not found in data base

I need trouble shooting information keyboard not working

UCBR
Give this document a try.
Keyboard Troubleshooting
Jendyruth
Please click the white Kudos star on the left to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your issue makes it easier for other people to find solutions.
I work on behalf of HP.

Similar Messages

My wireless keyboard is not found, My wireless keyboard is not found

My wireless keyboard is still not found after changing batteries. What can be wrong?

If you don't have a wired keyboard to do the following then, first, try restarting. Then if it is found and connected, go into Bluetooth Preferences and make sure it's setup and paired there. In addition, add it to Favorites by clickling on the small tools icon.
Next, check this box in Advanced. You can check Allow Bluetooth devices to wake this computer. Mine is unchecked because it may sometimes be responsible for waking the computer from sleep.
And you'll be far better off getting a decent wired keyboard. The Apple wireless ones eat batteries alive, and are prone to failure. I have one, but stuck it in a drawer right away, where it's been almost 4 years. Typing on it was horrid, as well.

New apple wireless keyboard could not be detected

I just purchased a new apple wireless keyboard and not paired with any device before. It could not be detected by my mbp 09 (with most updated software) by "set up bluetooth keyboard" button. It could not detected by bluetooth device serach on ipad2 either. Any setting procedures I missed? I followed all procedures I could find... Please help. Thanks!

found answer here- my wireless keyboard model is MC184LL/B
http://store.apple.com/us/question/answers/product/MB110LL/B?pqid=QXXHTX4T747AAF PXKHXCC72CYAXYU7XXYUPK9UFC74K27FPKF
The Function keys will not all work properly on 10.5.8, all the other keys will be fine. The previous model MB110LL/A would work with all the Function keys on Leopard or Snow Leopard.

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

TS3048 My wireless keyboard does not turn on. Yes batteries are new and installed correctly

I don't know why my wireless keyboard is not working. I can't sign onto my computer. Installed new batteries and yes they are installed correctly. I'm wondering if maybe it doesn't work anymore. It's only a couple of years old!

Hi, Mike.
Thank you for visiting Apple Support Communities.
I understand that your keyboard is not functioning. Here is a troubleshooting article that I would recommend going through for this.
Troubleshooting wireless mouse and keyboard issues
-Jason H.

Windows 8.1 freeze on any hardware scan or changes. USB wireless keyboard mouse not working

Problem : System Freezes frequently on any hardware scan or changes.
Symptom : Wireless Keyboard Mouse not working.
Caused by : VMkbd.sys located in C:\Windows\System32\drivers.
Issue : VMware player or VMware Workstation installed on Windows 8.1 causes compatibility issue leading to system freeze
Soultion : Please follow steps below
Step 1: Start > run > regedit
Step 2: Locate to this registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e96b-e325-11ce-BFC1-08002BE10318}
Step 3: On the left side plane, Right click on the registry {4d36e96b-e325-11ce-BFC1-08002BE10318} and then export it as backup. Just to be safe.
Step 4: Edit the UpperFilters, The value current would be kdbclass vmkbd. Remove the vmkbd. So only value left would be kbdclass.
Step 5: Restart your system and connect your USB wireless reciever. If all is well it will not freeze your windows now.
This worked for me. Hope this works for you. Enjoy..!!

Hi AshishSrivastava,
Thank you for your sharing and update.
Besides, I will change this thread type as discussion.
Best regards
Michael Shao
TechNet Community Support

The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
Just in case the title is too long to show, I have re-pasted here:
The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

BDAqua wrote:
Hello & welcome to the Forums!
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
http://doublecommand.sourceforge.net/
Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

Wireless keyboard does not work after waking up from idle

After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

The letter "u" on my iMac's wireless keyboard is not working.

The letter "u" on my iMac's wireless keyboard is not working. Does anyone know how to fix this? All the other key are working fine.

I started a having problems with it a few days ago. It worked intermittently then.

The wireless keyboard is not working with my iPad2. I turned on Bluetooth and paired it. What else is there to do?

The wireless keyboard is not working with my iPad2. I turned on bluetooth and paired the device. What other hidden step is there to do?

Well, the tiny green light comes on and blinks. . . After a frustrating time, I turned everything off. Later, when I tried the keyboard again, it worked. I guess the bluetooth process takes longer than expected. So thank you for taking the time to help a technically impaired person!!

TS3048 My left and right arrow on my wireless keyboard is not working. It does not highlight in the keyboard viewer. What's next?

My left and right arrow on my wireless keyboard are not working. I've looked at the keyboard viewer and see that they do not highlight. What do I do now?

Hello:
Try resetting the PRAM.
Barry

My PC sign: driver for keyboard filter not found. what can i do?

my PC sign: driver for keyboard filter not found. what can i do?

Hi:
I don't think it is a big deal but let's see if we can find a driver for it.
Please click on the missing keyboard filter in the device manager. Then click on the details tab. In the Properties drop down list, select the second item (Hardware ID's).
Post the top string of characters you see in the window.
That will give me more information to go on.
Paul

Window pops up saying can not complete request data base error, disk is full

Window pops up saying can not complete request data base error, disk is full

I am using the latest ID version with update and I am using a Mac running 10.9.5. This all started when I tried to make a PDF file from a pub I was working on. The application made the file but went into a spinning beach ball and I had to force quit. Now the window pops up when I open ID and also when I am working on a documents.

Wireless keyboard will not pair with computer. Unable to submit password.

My wireless keyboard will not pair with the computer. Now I am unable to submit the password in order to access the computer.

What version of the Mac OS are you running (from "About this Mac" under your Apple menu)?

W25 The Characteristic %NV% is not found in data provider ...

Hi Gurus,
we are currently starting to use the BI Portal. I want to publish a Query, which really works fine in BEx Analyzer, in the Portal using a Web Template.
So I used the BEx Web Application Designer to create a Template where I just inserted the Analysis Item with my data provider.
In BEx Web Application Designer I get the warning "W25 The Characteristic %NV% is not found in data provider XXX" - and when I open my Query in the Portal I get the dump message
"ERROR RS_EXCEPTION (000): SQL0104N An unexpected token """" was found following "'1' AND "I"."SVER" =". Expected tokens may include: "<space>". SQLSTATE=42601
MSGV1: SQL0104N An unexpected token """" was found
MSGV2: following "'1' AND "I"."SVER" =". Expected tokens
MSGV3: may include: "<space>". SQLSTATE=42601
ABEND RSBOLAP (000): Programmfehler in Klasse SAPMSSY1 Methode : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION".
Does anybody have an idea what's the problem? Please?
Thank in advance!

Sandra,
If you are not on SPS-14 try applying this note
1122372.
Please assign points if helpful.
Thanks,
Bobby

Wireless keyboard 5187URF not found in data base

Similar Messages

Maybe you are looking for