Wireless Keyboard and Safari...

I have a Microsoft Wireless Keyboard that I use with the computer I operate Safari on. I have noticed when I type things in Safari I often get double keystrokes. I will type a small bit of information below using the wireless keyboard to demonstrate what it is doing. Note that it doesn't do this when I have a wired keyboard connected. Also note that no other program detects multiple keystroke hits, including Internet Explorer and FireFox. I have even gone so far as to turn down the key repeat rate in my "Keyboard" control panel. That still didn't make a difference.
Here is text typed using my wireless keyboard and mouse. I don't know why itt does this but it bbecomes very frustrating when typing qquickly. Perhaps somebody out there will know why my keybboard is producinng these failures. It also doesn't seem to make a difference whether I am typing slowly or quuickly if it makes errors or not. I have even switched out the batteries to make sure it's not battery problems. Perhaps there is a reason that I have yet to discover as to why it does this.
Any ideas from anybody?

I can confirm this problem. It seems that this product is somehow buggy since I've got also many many problems with this keyboard on several Linux distributions. I've got no solution. As workaround I suggest changing keyboard

Similar Messages

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

New Mac Mini and 2006/2007 Wireless Keyboard and Mighty Mouse

Will my old wireless keyboard and mighty mouse from 2006 and 2007 work with the new Mac Mini?

Thank You!

My wireless keyboard and trackpad won't connect and i can't sign in

my wireless keyboard and trackpad won't connect and i can't sign in. yesterday I tested it with my mac air and it worked fine. i deleted the connection from my mac air and tried it again. then it worded. howerver, i shut down my computer correctly and tried it again today. now the same problem again.
HELP!!

no, just a usb mouse. but I found an old usb bluetooth hardware. this made it possible for me to make it work. but as soon as I remove the hardware it says "no bluetooth available"! I re-istalled mountain lion but still the same problem.
additionally I deleted/reset the PRAM. still the same problem.

Hi, I bouhgt a used Apple Power Mac G5, I want to buy a blue tooth card for the same to use wireless keyboard and mouse, i am just curious that why do i need to provide the serial number of my computer, is there any compatibilty issue?

Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?

Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

How can I get my wireless keyboard and my new magic mouse to enter info into a Christmas list app on iphone 3GS? Do I have to move to another room? I have bluetooth on in my iPhone.

I have wireless keyboard and a new magic mouse. I want to enter data into a Christmas list app on my 3GS iPhone. Too time consuming to just type on iPhone keyboard. How can I get keyboard and mouse to be 'connected' or recognized by my iPhone? I have Bluetooth "on" in my iPhone.

You cannot connect the mouse. This is not a feature of iphone
You can learn about connecting a keyboard in the manual:
iPhone User Guide (For iOS 5.0 Software)

How can i connect a Wireless Keyboard and a Trust mouse with a brand new Mac mini?

How can i connect a Wireless Keyboard and a Trust mouse to a brand new Mac mini?

Go to the Bluetooth icon on the menu bar and select "Set Up Bluetooth Device". Follow the wizard.
Alternatively, if you haven't yet unboxed and setup the Mini, you can pair the keyboard to the Mini (and possibly the mouse). However, I would set up with a USB keyboard and mouse and pair the Bluetooth devices afterwards.

Wireless keyboard and magic mouse

Getting these two peripherals, plus an M-Stand (all bought at the A store) were great purchases. This is my one year report.
The reason I got this set up (which can get burdensome to carry when you go on long trips) was because upon getting my mbp I didn't like the feel of the case's hard edge against my wrist when typing extensively (which, as a writer, I do). But I also really liked the design of the wireless keyboard and the magic mouse (although at first it took some getting used to to the mouse, even bought that little gummy add-on some enterprising cats had come up with, but chucked it pretty quickly after that as it became useless).
so anyway, what turned out to be another advantage of using peripherals with my macbookpro is, since in the year that I got this mbp I used the actual keyboard very little, the computer still looks pretty much news, none of those grease marks on the wrist page or signs of wear and tear on the trackpad. pretty awesome that
any thoughts from anyone else?
Johnny Chacho
PS: oh, the last thing I should add. I've always felt some major iMac-envy. I like the big monstrous desktop computer look better than laptops. ideally, I would have a humongous iMac and the 15 incher, but for now I have to content to myself with the latter. but by mounting it on the M-stand, I'm sort of making it look like an iMac in a way aren't it

Joni Chacho wrote:
I guess the only question was to ask if this kind of set up was prevalent among macbookpro users.
That's a different story. If that is what you want to know, yes I have a magic mouse, apple wireless keyboard and also have the mStand. It is convenient to use when at a desk to bring the mac to eye level. Many people use this type of setup. Sorry for the misunderstanding.

Wireless Keyboard and Mouse how to for XP Bootcamp

The promise of running Windows XP was marred by my inability to get the wireless keyboard to function in Windows during startup. Judging by the number of posts on this issue, I am not the only one who is frustrated. While didling with this issue I developed a sure fire, if somewhat un-Apple and in-elegant, way to get them to work.
First you need to create a driver disk using the latest version of Bootcamp (I used version 1.1.1) and install them under XP using a wired keyboard and mouse.
Now re-install the Apple Bluetooth drivers to make sure you have the latest version:
1. Boot into Microsoft Windows.
2. Open the Control Panel and select Bluetooth Devices.
3. In the Hardware Tab, click Apple Built–In Bluetooth.
4. Click the Properties button.
5. Click the Driver tab.
6. Click the Update Driver button and the Hardware Update Wizard will appear.
7. Choose "Install from a list or specific location (Advanced)".
8. Deselect "Search Removable media".
9. Select "Include this location this search".
10. Click Browse.
11. Navigate to c:/Program Files/Macintosh Drivers for Win XP/BthKicker/
12. Once the update is done, reboot.
Next we need to add the Apple Bluetooth Wireless Keyboard (and wireless Mighty Mouse if you have).
1. If you are using a desktop Mac, connect a wired USB mouse and keyboard.
2. In windows, open the Control Panel and select "Bluetooth Devices".
3. Turn Bluetooth Discovery to "On"
4. Make sure your Bluetooth Wireless Keyboard is on.
5. Click the Devices Tab.
6. Click the "Add"button.
7. When the "Welcome to the Add Bluetooth Device Wizard" window appears, select the "My device is set up and ready to be found" checkbox, then click Next.
8. Locate the keyboard in the list the Wizard provides, then click Next.
9. Connect and select the "Let me choose my own passkey" option.
10. Enter "0000", then click Next.
When the process has completed successfully, you will see this message: "The Bluetooth device was successfully connected". You should now be able to use your keyboard.
On your next reboot in Windows, the logon screen will come up and neither your wireless mighty mouse or wireless keyboard will work. To activate the mouse, click one of it's buttons once or twice and it will start after a couple of seconds. unfortunately keyclicks will not start the keyboard.
To get it to activate, turn the keyboard upside down and use the switch to turn the keyboard off and back on again. Wait about 6 seconds and voila! As I said, not elegant, but definately a lot better than having 2 keyboards. It would be nice if Apple could modify the firmware to start the keyboard when a key is pressed, just like the mouse.
Have fun!

Here's what apple recommends:
http://support.apple.com/kb/HT3226
Regards,
Captfred

My wireless keyboard and mouse do not work on my All-In-One computer?

Q.: My wireless keyboard and mouse do not work on my All-In-One computer?
A.: If your wireless keyboard and mouse do not work even after changing the batteries, please try re-syncing them by following these steps.
1. Make sure the computer is on, plug in the USB receiver. Push the button on the USB receiver until it flashes blue.
2. While the receiver is still flashing, press the red connect button on the keyboard (Make sure the batteries are installed). The USB receiver should stop flashing after pressing the button on the keyboard. It may take up to 8 seconds to sync.
3. Repeat the same process for the mouse. Push the button on the USB receiver, then press the connect button on the mouse (Make sure the mouse is on).
Note: This applies to all MSI All-In-One computers that include the ES500W wireless keyboard and SW130 mouse.

"This machine has an added 4 USB ports, could this be causing a problem?
It definitely could be the source of the problem. Perhaps the PCI card was bumped loose during shipping?
Have you tried removing the card? That's where I would start.
Keep us posted.

TS2662 changed the batteries on wireless keyboard and does not turn on now

Changed the batteries on wireless keyboard and now it does not turn on, is there a trick to this?

No trick. Be sure the batteries are inserted correctly and that the cover is tight.
Try different batteries.
Reset the SMC if it still does not work.
Barry

Running Boot Camp in Windows 7 with Bluetooth Wireless Keyboard and Wireless Magic Mouse

NOTE: I was installing a fresh copy of Windows 7 Professional on a 27" iMac mid-2010 with a Processor Speed of 2.93 GHz, a Core i7 Processor Type, a Quad Core Processor Configuration, 8GB RAM, and a ATI Radeon HD 5750 Graphics Card. I run Snow Leopard so it is a 64-bit OS. I have a Wireless Keyboard and Wireless Magic Mouse as well. In order to install Windows 7 you need a Wired Keyboard and Mouse. You will also need a Wired Keyboard and Wired Mouse to update Boot Camp.
Updating Boot Camp Assistant (VERY IMPORTANT)
First, plug in a wired keyboard and wired mouse. The Boot Camp Assistant version that came with my iMac was 3.0 so I upgraded it to 3.1 and then to 3.2. I'm not sure if only the upgrade to 3.1 is necessary, but I took it a step further. I was told by Apple Tech Support that you first needed to upgrade to version 3.1 before being able to upgrade to 3.2 These upgrades will not be found using Software Update on the Mac. However, they can be found at http://support.apple.com/downloads/#macoscomponents
They also have software updates for 32-bit machines as well and MacBook Pro updates.
NOTE: Before updating the version of Boot Camp, but after installing Windows 7 and after putting in the Mac OS X Install DVD to run Setup.exe to download the Mac drivers, run Software Update for the Mac while logged into Windows 7 by clicking on Start - All Programs - Software Update for any additional updates.
Next I installed Boot Camp Software Update 3.1 for Windows 64 bit found at http://support.apple.com/kb/DL1336
I then ran Software Update for the Mac while logged into Windows 7 by clicking on Start - All Programs - Software Update
Then I installed Boot Camp Software Update 3.2 for Windows 64 bit found at http://support.apple.com/kb/DL979
I then installed Boot Camp 3.2 Update for iMac (early 2011) found at http://support.apple.com/kb/DL979 but I'm not sure if this was necessary.
Once Boot Camp 3.2 has been installed I ran Software Update for the Mac again while logged into WIndows 7 to make sure I had all the updates.
Configuring a Bluetooth device on a Windows-based computer
(from http://support.microsoft.com/kb/952818)
How to make sure that the Bluetooth service is started (MY COMPUTER WAS ALREADY SET UP TO RUN BLUETOOTH, SO THE NEXT 8 STEPS COULD BE OPTIONAL)
Open the Microsoft Management Console (MMC) snap-in for Services. To do this, follow these steps.
Windows Vista or Windows 7Windows XP
Click Start, and then click Run.
Copy and then paste (or type) the following command in the Open box, and then press ENTER:services.msc
Click Start , copy and then paste (or type) the following command in the Start Searchbox, and then press ENTER:services.msc
In the Programs list, click Services.
If you are prompted for an administrator password or for confirmation, type the password, or click Continue.
Double-click the Bluetooth Support service.
If the Bluetooth Support service is stopped, click Start.
On the Startup type list, click Automatic.
Click the Log On tab.
Click Local System account.
Click OK.
If you prompted to restart the computer, click Yes.
How to connect the Bluetooth device to the computer
1. First off, you need to go into Mac OS and remove the keyboard and mouse from your Bluetooth settings entirely. You'll add them back in later (see 9) below).
2. Boot into Windows using a USB connected Mouse and Keyboard.
3. Go to Control Panel – Hardware and Sound – Device and Printers – Add a Device
4. Turn on the Mouse to send out a signal and once it sees it select it to be paired to the computer
5. Run 3.) again except select the keyboard.
6. Turn on the Keyboard to send out a signal and once it sees it select it to be paired to the computer by typing in the 8 digit number into the wireless keyboard and hit ENTER/RETURN.
7. To see if everything was added go to Devices and Printers and see if they were added to the list.
8. Shutdown Windows 7 and Restart using Mac OSX. If you adjusted the Boot Camp settings while in Windows 7 you will see a Boot Camp icon in the system tray located at the bottom right of the screen. From here you can logoff and reboot in Mac OSX. If you don't, do a RESTART and hold the Option key down after hearing the GONG and select the Mac HD option while logging in. Now it's time to add back the wireless mouse and keyboard to be recognized by your Mac.
9. Go to System Preferences – Internet and Wireless – Bluetooth
10. Hit the “+” button to launch the Bluetooth Setup Assistant to find the devices sending out the signal.
11. Highlight the device found and hit “Continue”
12. Do this for both the keyboard and mouse. You will be prompted to type in the 8 digit code into the wireless keyboard in order to pair it with your computer.
13. Click on the pinwheel next to the “-“ sign to rename the wireless devices if you'd like.
I then logged back into Windows 7 to see if the mouse and keyboard were functional and had no problems. For some reason, Windows has problems pairing bluetooth devices that are already paired under a Mac OSX. Many people have updated Boot Camp, yet still were not able to pair their wireless devices because they didn't break the Bluetooth connection on the Mac side first. So both steps are necessary (1) Updating to at least Boot Camp 3.1 if not 3.2 and (2) Deleting the Wireless mouse and keyboard link while running Mac OSX before trying to pair them in a Windows OS.

I found the answers by trial and errors.
@ is obtained by CTRL + OPT + 2
# is obtained by CTRL + OPT + 3
(without shift or caps lock)
These two signs are critical and I fail to understand why this information is not readily available from the help function or from the Apple support.
Jean-Philippe

TS3048 I changed the battery in my wireless keyboard and checked the batteries to make sure that they work. When I returned to my computer (the computer was already on) the keyboard would not work, no response at all. What do I do?

I changed the battery in my wireless keyboard and checked the batteries to make sure that they are good, I left the computer on while I changed the batteries. When I returned to the computer, the computer does not acknowledge the keyboard so I can't do any diagnostics. What do I do?

Hold the power key on the keyboard down for 5 secs to power off, tap the power button once to start. It should connect automatically.

My new mac mini doesn't detect my wireless keyboard and mouse from logitech

I recently bought the Logitech MK550 wireless keyboard and mouse combo for my late 2014 Mac mini. Basic functions work, however, when I try to add the keyboard and mouse in the System Preferences it can't find either one. So right now I have this great big keyboard that I can only use about half it's full functionality and an unassigned button on the mouse. Any ideas? Also, I would like to add an apple remote to my mini. I have one from my old iMac. Is this possible?

Try resetting the SMC.
Question #2 - I have no idea.
Barry

I have an Imac in my bedroom and apple tv hooked to my big screen in my living room. When I select mirror Imac on the Imac to view on the big screen in living room, can I get a wireless keyboard and track pad to control Imac from living room?

I have an Imac in my bedroom and apple tv hooked to my big screen in my living room. When I select mirror Imac on the Imac to view on the big screen in living room, can I get a wireless keyboard and track pad to control Imac from living room?

I do something like that, and can confirm 20 feet won't be a problem. More than 30 or so might be.

Wireless Keyboard and Safari...

Similar Messages

Maybe you are looking for