Wireless keyboard and Touch Pro 2?

I think that the Apple Wireless Keyboard and the HTC Touch Pro 2 are an ideal match, they both look great and the Apple is the right size to transport. They even pair up via Bluetooth.
Unfortunately, I can't seem to type anything with the keyboard - I assume I need a driver. Has anyone had any success in getting them to work?
Thanks

whooops, wrong topic, have reposted to http://discussions.apple.com/thread.jspa?threadID=2128332&tstart=0

Similar Messages

  • TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work).  "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
    That will let you select the "turn on Bluetooth" icon.

  • I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help please...

    I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help me please...

    You can find the Apple Bluetooth card on eBay for as little ten dollars (says its for the 2008 model Mac Pro, not sure about the 2007).
    http://www.ebay.com/itm/Bluetooth-Board-iMac-and-Mac-Pro-922-8233-922-8233-/1208 49278570
    Here is a link to a full explanation of the card and how to install it. Part numbers may differ a bit as that is an old article and newer models have come out.
    http://www.xlr8yourmac.com/systems/Mac_Pro/Bluetooth_MacPro_install/Bluetooth_Ma cPro_install.html
    Just make sure that the part will work in your model Mac Pro. To that end, you may be better off avoiding eBay and going to a parts reseller. There are even third party cards that use the internal Apple bluetooth slot.
    http://fastmac.com/bluetooth.php
    In theory, using a USB or PCI card will work at login so long as it is recognized by Apples drivers. You say you need to launch an application to use your current USB Bluetooth dongle? If it is not controlled by the Bluetooth icon in the menu bar then it must be using a third party driver of some sort. Unfortunately, I don't know off hand which USB and PCI cards are supported.

  • I have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

    i have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

    korgba wrote:
    it pops up a script were it says that the macbook cannot find a bluetooth keyboard, and it isnt a keyboard connected
    For some reason, your Mac doesn't recognise that a keyboard is present, so it looks for a wireless keyboard. The question is, why doesn't your Mac recognise that a keyboard is attached?
    First, you need to make sure you remove all peripherals, especially USB peripherals (the keyboard is on the USB bus). Then restart holding down the Shift key. This should boot in Safe mode. If the computer boots normally (not in safe mode) and the keyboard is still not working, try resetting the SMC
    Intel-based Macs: Resetting the System Management Controller (SMC)
    <http://support.apple.com/kb/HT3964>
    If that still doesn't fix the problem, then the keyboard (or its controller) is probably damaged and needs to be replaced.

  • Are the apple wireless keyboards and mac book pro keyboards the same size?

    Are the apple wireless keyboards and the mac book pro keyboards the same size? I have the most current wireless keyboard and I use it with my iPad. Thanks in advance

    I took it to the same shop where i purchased they sent it to the apple
    service centre and it is a week and no one informed me abt the problem
    or the action on it.
    We are mainly just users to users here, and sometimes a Apple folk will respond, but it's just a direction to a Apple support document, no service or account issues are handled here.
    Will they replace the mac book pro as it is still in warranty
    We don't know what Apple will decide to do in your case, the best source of information is the shop you brought it to.
    They might be in the process of fixing it, or they might be deciding they need to keep your machine for investigation.
    Apple will take care of you, make sure you buy AppleCare and a external drive for TimeMachine if you haven't already.

  • Will the new Apple wireless keyboard and mouse work with my Macbook Pro?

    Looking at purchasing a wireless keyboard and mouse for my Macbook Pro. Figured the one made by apple will work, but not sure... Any suggestions on a good wireless keyboard and mouse, or knowledge on whether Apples will work or not?

    keyboard: http://eshop.macsales.com/item/Apple/MC184LLANB/
    magic mouse: http://eshop.macsales.com/item/Apple/MB829LLABB/
    I just got them last week and the keyboard is new and the mouse is used but looks brand new.  And you get a free pair of AA bateries with the mouse.  And you can get 2AA batteries for the keyboard for an extra $1.29 I highly recommend going this route as I did very recently and am very pleased.

  • Running Boot Camp in Windows 7 with Bluetooth Wireless Keyboard and Wireless Magic Mouse

    NOTE: I was installing a fresh copy of Windows 7 Professional on a 27" iMac mid-2010 with a Processor Speed of 2.93 GHz, a Core i7 Processor Type,  a Quad Core Processor Configuration, 8GB RAM, and a ATI Radeon HD 5750 Graphics Card.  I run Snow Leopard so it is a 64-bit OS.  I have a Wireless Keyboard and Wireless Magic Mouse as well.  In order to install Windows 7 you need a Wired Keyboard and Mouse.  You will also need a Wired Keyboard and Wired Mouse to update Boot Camp.
    Updating Boot Camp Assistant (VERY IMPORTANT)
    First, plug in a wired keyboard and wired mouse.  The Boot Camp Assistant version that came with my iMac was 3.0 so I upgraded it to 3.1 and then to 3.2.  I'm not sure if only the upgrade to 3.1 is necessary, but I took it a step further.  I was told by Apple Tech Support that you first needed to upgrade to version 3.1 before being able to upgrade to 3.2  These upgrades will not be found using Software Update on the Mac.  However, they can be found at http://support.apple.com/downloads/#macoscomponents
    They also have software updates for 32-bit machines as well and MacBook Pro updates.
    NOTE: Before updating the version of Boot Camp, but after installing Windows 7 and after putting in the Mac OS X Install DVD to run Setup.exe to download the Mac drivers, run Software Update for the Mac while logged into Windows 7 by clicking on Start - All Programs - Software Update for any additional updates.
    Next I installed Boot Camp Software Update 3.1 for Windows 64 bit found at http://support.apple.com/kb/DL1336
    I then ran Software Update for the Mac while logged into Windows 7 by clicking on Start - All Programs - Software Update
    Then I installed Boot Camp Software Update 3.2 for Windows 64 bit found at http://support.apple.com/kb/DL979
    I then installed Boot Camp 3.2 Update for iMac (early 2011) found at http://support.apple.com/kb/DL979 but I'm not sure if this was necessary.
    Once Boot Camp 3.2 has been installed I ran Software Update for the Mac again while logged into WIndows 7 to make sure I had all the updates.
    Configuring a Bluetooth device on a Windows-based computer
    (from http://support.microsoft.com/kb/952818)
    How to make sure that the Bluetooth service is started (MY COMPUTER WAS ALREADY SET UP TO RUN BLUETOOTH, SO THE NEXT 8 STEPS COULD BE OPTIONAL)
    Open the Microsoft Management Console (MMC) snap-in for Services. To do this, follow these steps.
    Windows Vista or Windows 7Windows XP
    Click Start, and then click Run.
    Copy and then paste (or type) the following command in the Open box, and then press ENTER:services.msc
    Click Start , copy and then paste (or type) the following command in the Start Searchbox, and then press ENTER:services.msc
    In the Programs list, click Services.
    If you are prompted for an administrator password or for confirmation, type the password, or click Continue.
    Double-click the Bluetooth Support service.
    If the Bluetooth Support service is stopped, click Start.
    On the Startup type list, click Automatic.
    Click the Log On tab.
    Click Local System account.
    Click OK.
    If you prompted to restart the computer, click Yes.
    How to connect the Bluetooth device to the computer
    1. First off, you need to go into Mac OS and remove the keyboard and mouse from your Bluetooth settings entirely. You'll add them back in later (see 9) below).
    2. Boot into Windows using a USB connected Mouse and Keyboard.
    3. Go to Control Panel – Hardware and Sound – Device and Printers – Add a Device
    4. Turn on the Mouse to send out a signal and once it sees it select it to be paired to the computer
    5. Run 3.) again except select the keyboard.
    6. Turn on the Keyboard to send out a signal and once it sees it select it to be paired to the computer by typing in the 8 digit number into the wireless keyboard and hit ENTER/RETURN.
    7. To see if everything was added go to Devices and Printers and see if they were added to the list.
    8. Shutdown Windows 7 and Restart using Mac OSX.  If you adjusted the Boot Camp settings while in Windows 7 you will see a Boot Camp icon in the system tray located at the bottom right of the screen.  From here you can logoff and reboot in Mac OSX.  If you don't, do a RESTART and hold the Option key down after hearing the GONG and select the Mac HD option while logging in.  Now it's time to add back the wireless mouse and keyboard to be recognized by your Mac.
    9. Go to System Preferences – Internet and Wireless – Bluetooth
    10. Hit the “+” button to launch the Bluetooth Setup Assistant to find the devices sending out the signal.
    11. Highlight the device found and hit “Continue”
    12. Do this for both the keyboard and mouse.  You will be prompted to type in the 8 digit code into the wireless keyboard in order to pair it with your computer.
    13. Click on the pinwheel next to the “-“ sign to rename the wireless devices if you'd like.
    I then logged back into Windows 7 to see if the mouse and keyboard were functional and had no problems.  For some reason, Windows has problems pairing bluetooth devices that are already paired under a Mac OSX.  Many people have updated Boot Camp, yet still were not able to pair their wireless devices because they didn't break the Bluetooth connection on the Mac side first. So both steps are necessary (1) Updating to at least Boot Camp 3.1 if not 3.2 and (2) Deleting the Wireless mouse and keyboard link while running Mac OSX before trying to pair them in a Windows OS.

    I found the answers by trial and errors.
    @  is obtained by CTRL + OPT + 2
    #   is obtained by CTRL + OPT + 3
    (without shift or caps lock)
    These two signs are critical and I fail to understand why this information is not readily available from the help function or from the Apple support.
    Jean-Philippe

  • Bluetooth lags on new Mac Mini w/ Wireless keyboard and Magic Trackpad

    Hi everyone,
    I just bought a new mac mini (the basic model) and attached it via HDMI to a HD TV. I bought the mac wireless keyboard and magic trackpad to go with it. Everything works except that both the keyboard and mouse are consistently slow. Not quite to the point of un-useable, but very noticeable.
    I've read that it might be radio interference with the bluetooth signal. To test this, I put my Macbook Pro right next to the new mac mini (while it and the screen were on) and paired the keyboard and mouse to the macbook pro. Everything was super fast, no lag - so that leads me to think the problem is with the Mac Mini. I've tried playing with all the bluetooth options, to no avail.
    Anyone have any suggestions? I've also tried attaching a bluetooth magic mouse and had the same slowdown. Nothing seems to affect the lag, it's very consistent and probably around half a second between keystroke or mouse movement and it's reflection on the screen.
    Thanks,
    -Mike

    Hey All,
    I've got the same issue with my Mac Book Pro and a new Samsung LED 3D TV. Its connected through a DVI out from the mac to a gold HDMI adaptor, then to HDMI into the TV. I've used this set-up with my last HDTV which was a Sharp LCD, and there was no lag and no issues.
    I noticed that for me, the lag appeared on the TV, but not on the laptop, so I thought it might be the connection (If I went right to HDMI instead of an adaptor maybe it'd be better) but I don't think it is given that the last TV worked fine.
    I then went to my display settings in the control panel on my mac and changed the refresh rate from 24 Hertz to 60 Hertz (NTSC) on the TV and the issue has pretty much completely dissappeared. Not sure why that was the default, but I imagine certain video and other media will play even smoother as well!
    Woo hoo!
    Hope you all figure this out too!
    TS

  • Windows 8 USB wireless keyboard and mouse?

    I have a MacBook Pro 13.3" late 2011 base model running Mac OS X 10.7.4 (Lion). I am planning on installing the Windows 8 Release Preview (64-bit). The requirements state that I need to use a USB keyboard and mouse to get the drivers going once I am in Windows. My question is whether my Microsoft wireless keyboard and mouse, which connect via a USB to my MacBook, will work in Windows 8 with the same functionality so I can run the executable file to download the drivers. Also, as a follow-up question, is Windows 8 Release Preview (64-bit) a safe install for me through Boot Camp?
    Thanks in advance,
    Rith=Apple4Life

    Really? Have you installed Windows 8 onto your Mac because in some videos I have watched, I have seen people not being able to use the built-in keyboard and trackpad until the drivers are installed by using the .exe file. Anyway, for backup, I have secured a wired keyboard and mouse just in case and will be installing Windows 8 soon. It would be nice to download the RTM version, but I wouldn't trust any source other than Microsoft itself.
    Thanks,
    Rith=Apple4Life

  • Wireless keyboard and wireless mouse on macbook 10.4.11

    hello,
    I recently bought wireless mac keyboard and magic mouse for my macbook with 10.4.11 version.
    The basic functions of the keyboard (letter keys work, numpad works) and mouse work (move cursor, left&right click) , but the special keys on keyboard and touch gestures don't work.
    Is there anything I could do to make the special keys on keyboard & magic mouse gestures work on my macbook?

    The Magic Mouse is not compatible with your operating system. See here, at the bottom:
    http://www.apple.com/magicmouse/
    I imagine that your new wireless keyboard, if it's Apple branded, is this one, which is also not compatible with your OS:
    http://www.apple.com/keyboard/
    Again, the system requirements are on that page. They should also have been on the boxes at the store or on the web site before you bought them.
    You need to upgrade to either 10.5 (Leopard; call the Apple phone sales line, as there are no more available in stores) or 10.6 (Snow Leopard; available everywhere Mac software is sold).

  • Apple wireless keyboard and magic mouse disconnecting

    Just bought new MBP Retina Display (OSX 10.8.2) to replace 1st Gen. MacAir.  Used to use Apple Wireless Keyboard and MM on old Air and worked flawlessley for years.  New MBP installed both of these older items (keyboard and MM) cleanley when I set up, but almost instantly, after about one minute of working, the keyboard and MM disconnect themselves and the only way to reconnect is power them off and then power back up.  I have hanged the batteries on both to high end ones and they are still holding charge very wel.
    In my office I have a work PV that also uses two USB wireless devices for the PC keyboard and mouse and then also a small HDX Jam Bluetooth speaker.  Also, my iPhone and iPad are around.  My Airport Express is about two feet away from the MBP as well.  Again, all of these worked just fine with my Air for over five years.
    I took the MBP, keyboard and MM into the Apple store and had them check it out.  Of course it worked perfectley while I was there, plus I learned that in my new MBP the wireless card has the bluetooth built into it and unless my wireless connections got wonky, then the chances of it being hardware were slim.
    I am so out of options.  I have tried to identify all environmental factors.  I have tried moving the MBP closer, further, etc. and still nothing.  It is the wierdest thing and now getting very frustrating because I am having to use the MBP keyboard all the time and it is supposed to be up on a stand and in a more ergonomically friendly position.
    Anyone got any suggestions?  Is there something I am missing?  Is there something in my environment I am unaware of that could be contributing to this?

    I have a 15" MBP Retina display from 2012, Lion 10.7.5, running lid closed with bluetooth mouse and keyboard.  My desk configuration has not changed but in the last couple of weeks I get both devices disconnecting simultaneously, once or twice per day.  The dashed bar disappears from the Bluetooth icon in the menu bar.
    I turn bluetooth off and on (lift the lid, using keypad), and then it all works again.  I don't need to even touch the mouse or keyboard they instantly reconnect.  It is not the magic mouse battery problem, I've suffered through that and have it licked, and that would only take out the mouse.  There's nothing obvious in the system logs.  No change I know of in nearby electrical appliances or WiFi configuration.

  • Do I have to power off a wireless keyboard and magic pad ?

    Hello,
    I am a new iMac user. I recently purchased it with a wireless keyboard and a magic pad. The question may be simple. When I shutdown the iMac, do I still have to power off the keyboard and magic pad ? Or do they power down as well ? From little research I made, it seems like they would power down themselves provided that there is no other Mac with Bluetooth enabled within range. Thoughts ?
    Thanks.

    The wireless mouse and keyboard that came with my Mid 2010 iMac are now paired with my MacBook Pro when it's on the desk, and the trackpad is on my wife's new iMac with 10.8. I don't turn them off unless I'm traveling with them. The trackpad and mouse can go over a year that way on a set of batteries.
    The keyboard on the other hand, behaves differently. Where the other two devices will show slow but consistent decay of battery power over time, the keyboard batteries will stay at 100% for quite a while, then drop suddently to 50%, stay there a while, then give up. I've learned to pack a few extra AA batteries in my travel kit as a result of the unpredicitable dropoff instead of short life.
    Still the battery life is pretty good for all three and I don't think it hurts anything to leave them on. I do, and the devices are quickly recognized when I open the computer.
    It's up to you and what makes you comfortable. Either way they work.

  • Can I pair my Mac with two wireless keyboards and trackpads?

    I have a MacBook Pro.  I want to have external display (and wireless keyboard and trackpad) at all 3 places I work.  Is that possible?  I read that it's possible to have a wireless keyboard work with multiple devices, but I couldn't find if it works the other way.  thanks

    I have two offices and I move my Mac between them.  I have paired both wiresless keyboards and when I show up at the other office it just pairs automatically.

  • My Keyboard and touch-pad will work during post, but will not work after the os loads?

    I have a G60 and My Keyboard and touch-pad will work during post, but will not work after the os loads? Im running Windows 7, Anyone have any Ideas? I have already tried a hard reset, and safe mode???

    Try pressing the fn key and f2 to reach bios
    or
    try a usb mouse from your desktop
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • Cannot load the recovery media since my keyboard and touch pad do not work

    My labtop Toshiba C55D-A5392 may have a virus issue which cause the keyboard and touch pad do not function.  initially only a few keys don't work...after a couple days most keys don't work and now no keys are working and the touch pad failed too. I can't even load up windows now.   I bought a recovery media from toshiba and try to reset the laptop to factory settings.  I received the USB drive media from Toshiba, but I cannot load it since I cannot get the laptop into the bios (since my keyboard does not work).  Can anyone help me to resolve this issue?

    Try pressing the fn key and f2 to reach bios
    or
    try a usb mouse from your desktop
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Maybe you are looking for

  • BDT for Business Partner

    Hi all,    I added new fields by using 'EEWB' for BP. i have assiged fields to sections also. but my problem in every BP type showing 'Custom fields TAB' i want to remove this Tab. i know Bupt also where i want to do i don't know pls tell me where i

  • How do you turn off the voice on a video while keeping the background music on?

    I have to watch an exercise video for training. You are supposed to be able to turn on and off the voice by going to the computer icon and toggle the voice on/off. However, that feature isn't on my ipad or ipod. How do I turn off the voice while keep

  • UCCX 8.0.2 - Call in stuck with Agent status ready

    Hi Guys, I would like know what is the best log about RTMT I can use to analyze the calls stayed stuck with agent. Was verified in Real Time Report that there are agent available (state ready), but, the call was transfered for queue. Thanks Wilson   

  • New Font in System Font Panel- iMovie

    I use I-movie to create short videos for clients.  One Client is requesting a special font that is not listed in the systems font panel.  This is the second of this request from clients.  So, is there a way to import different fonts into that panel a

  • I cannot open FF when I click on the desk top icon.

    I cannot open FF when I click on the Icon. I have reinstalled it, and done everything that I know ot do. I have restored my computer to a earlier date. I can get to Gmail through E-, but cannot open FF.