Wireless keyboard does not type w e r t.?

wireless works on all letters except.  Q w e r t

Hi,
Sounds like a problem with your keyboard. Does it work with Safari?
Jim

Similar Messages

  • Wireless keyboard does not work after waking up from idle

    After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

    After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

  • Keyboard does not type letter on key; how to return to normal?

    keyboard does not type letter on key; how to return to normal?
    It looks like cyrillic or some slavic language. There is no correspondence between the letter on the key and what appears.

    Go to system preferences/language & text/input sources and make sure that only the box for US is checked.
    Let us know what version of OS X you are running.
    What do the keys labeled asdfg type?  Copy/paste it here.

  • TS3048 My wireless keyboard does not turn on. Yes batteries are new and installed correctly

    I don't know why my wireless keyboard is not working. I can't sign onto my computer.  Installed new batteries and yes they are installed correctly.  I'm wondering if maybe it doesn't work anymore. It's only a couple of years old!

    Hi, Mike.  
    Thank you for visiting Apple Support Communities.  
    I understand that your keyboard is not functioning.  Here is a troubleshooting article that I would recommend going through for this.  
    Troubleshooting wireless mouse and keyboard issues
    -Jason H.  

  • My keyboard does not type at all and the trackpad not working properly

    Hello everyone,
    Today I realised that my computer does not type any letters at all and everytime I try to write something the trackpad works only as if I was pressing the right button (two fingers). After a while the trackpad starts to work again as it should. I have noticed that the trackpad does this when I try to write something. Don't know what to do and this macbook air is quite new and I cannot surf on the internet, write essays and I cannot log in with my password. Sometimes the only letter that works is the "o" and the others do not show up and it makes a sound. I have realised that if I press some of the other letters it can also erase some of the text already there.
    Thank you in advance.
    Kind regards.

    It sounds like you have a stuck key or some other malfunction.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • Help!  Wireless Keyboard will not type!

    Hi to all!
    Long time existing problem. My wireless keyboard from time to time unresponsive. I cannot type anymore (Right now I type with the keyboard viewer). Reported to Apple before and got new keyboard but problem still existing. Very frustrating. I'm living on an island and it would be a huge effort to carry the unit back to the dealer.
    I cannot type, caps lock and space bar not working. Other keys like delete, command, shift and upper line are working.
    I repaired permission, restart and shut down several times already, but it won't work. Earlier times it was working after a restart but not now. It is indicated that keyboard and mouse is paired and on.
    I have a mid 2009 Mac Pro model. I'm running on Snow Leopard with latest updates.
    Now also my pointer didn't respond anymore and had to shut down by pressing the power button.
    Finally now after starting again everything is back to normal.
    Has anybody similar problems? What can I do? If cannot do my editing work, my computer is worthless for me. I had times i was even unable to save all my work because of that.
    I hope some insider can help me, please.
    Michael

    hi again, i just found a solution to my problem so i hope it helps you.
    i opened >system preferences>universal access>mouse & trackpad, from there i discovered that mouse keys was turned on( probably by my 4 year old son). i switched these off and keyboard works fine again.
    i hope this helps you if you are still having difficulties.

  • Wireless keyboard does not work with Safari.

    Space bar does not work when using Apple Wireless Keyboard with Safari to fill web forms.
    No problem with Firefox.
    Early 2008 iMac, 10.10.1, 6GB Ram

    Im going to assume you are using the Apple Wireless Keyboard with your devices.
    Whats probabaly happening is both of your devices are trying to connect to your keyboard at the same time and it is causing it to not function properly.
    I suggest you disable bluetooth on the device you AREN'T using and try it again with the one you ARE using.
    If this doesn't solve your issue, try re-pairing the keyboard with the iPad you wish to use it with. It may have just not made a strong connection.
    Hope these suggestions help!

  • KG 1061 Wireless Keyboard Does not work

    Key "a" stopped working after I haven’t used my computer for a week. Other keys seem fine.
    It was working fine before. I’ve tried replacing batteries, uninstalling the keyboard and updating driver. Nothing works. Please help!

    Hello @Francescalam,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the wireless keyboard on your desktop computer does not work, and I would be happy to assist you in this matter!
    To re-enable the wireless keyboard for your system, I recommend following the steps in this document on Wireless Keyboard and Mouse Troubleshooting.  
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • TS3048 wireless keyboard does not work

    I just used my Apple wireless keyboard a few days ago.  Today I cannot get it working.  Caps lock does not even light up, so I canged batteries.  My MacMini cannot detect bluetooth of my keyboard, it seems.  Any suggestions?

    Hello:
    Try resetting the SMC.
    Barry

  • Wireless keyboard does not auto setup with a mac mini

    I have just bought a mac mini and am trying to set it up, the only keyboard I have is the apple wireless keyboard. I have switched the Mac on and it finds the "magictrack pad" but does not seem to find the key board. The keyboard light flashes for the the 3 minutes looking for something to pair with - I have managed to pair it with my iPad (and remove the pairing - afterwards) but it does not auto-pair with the "new" Mac. The problem is that I cannot go any further (to allow me to complete the full setup procedure) without filling in the information that is required and I cannot fill in the information required without a keyboard. I do not have a USB (or any other keyboard) so I seem to be a little stuck. - Any ideas would be gratefully received.
    Is there any way of connecting a PC laptop to the Mac Mini and use the keyboard on the PC?

    Not sure what your process was but try this.
    Make sure the Mini is off. Hold down the button
    on the keyboard to make sure it is off.   Next
    start the Mini and as soon as you hear the
    start up chime, press the power button on the
    keyboard.  Be sure not to press any other keys.
    For what ever reason, timing is critical with the
    keyboard pairing at boot time.  This is only an
    issue when doing things that require a keyboard
    at boot.  Once paired, it connects fine when normally
    booting.

  • Ok so I got my mac mini today and I am trying to set it up but my wireless keyboard does not sync up. I have tried entering the code that the mini displays but still cannot get past the sync keyboard screen. Since I dont have a wired keyboard ...any ideas

    Happy Thanksgiving. Any ideas on how to sync up a brand new man mini with a wireless keyboard. My attempts at following the directions have been frustated so far. Entering the numerical code has not yet led to a successful sync up.

    Alright, very good.
    Have you tried a PRAM reset? OS X Mavericks: Reset your computer’s PRAM

  • Wireless keyboard does not work

    both my wireless mouse and keyboard had stopped working. I rebooted and the mouse started working but the keyboard is still not working.

    Check to ensure that the batteries in the mouse and keyboard are not flat. It sounds as from your description that it may be the case with the keyboard or that you need to reconnect the keyboard to the wireless dongle.
    You have not specified whether your wireless keyboard and mouse are HP or aftermarket. It would help if you did that.
    How to identify your HP product
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Wireless keyboard does not pair

    Hi,
    I paired successfully a keyboard to an iMac awhile ago and then I couldn't get it work for a reason I don't know and let it go.
    Now Ineed this wireless keyboard for another computer and I would like to try once again to make it work.
    Here's my problem :
    Ther keyboard is recognized by the bluetooth assistant (with my name by the way). Then I get the code to enter and then the pairing fails. And I know I have to press the enter key ! My batteries are ok (green light). I have tried on a friend(s computer, same thing and the keyboard is also recognized with my name on his machine. Is there a way to globally reset this keyboard and start from the beginning ?
    Any idea would be welcome !

    Hello p:
    Welcome to Apple discussions.
    Try trashing a preference file and restarting (com.apple.bluetooth.plist).
    I would also reset the PRAM:
    http://support.apple.com/kb/HT1379
    Barry

  • New Wireless Keyboard does not function Ctrl+Alt+Del in Windows 7 32 Bit

    As the subject, does anyone can help me ?

    HI, Michael;
    Crystal Reports 2008 is the only version that is tested / certified and supported on Windows 7.
    Another thing that I noticed from your post - Crystal Reports XI does not work with VS.NET 2008 - are you sure that is the version you are using? Which versions of our .NET assemblies do you have in your project?
    Best Regards,
    Jonathan

  • Keyboard does not type my password

    I can't get my keyboard to type my password. I have put new batteries no response. My first letter is a capital and nothing happens . When I type any other letter at random it seems to work. Do I need a new keyboard? Thanks for any other suggestion to make the capital touch work.

    use onscreen keybord
    ucan find this in
    system preferences ->language & text or keyboard
    in language & text click on input sources -> then click on keyboard & character viewer..........and turn it on
    or
    in keyboard check the options ( show keyboard&character viewers in menu bar)
    this will help you for insert the password

Maybe you are looking for

  • Firefox 4, 5, AND 6 will not start. Crash reporter every time. Firefox 3.6 upgrades to 3.6xx and loses all bookmarks

    I cannot upgrade to firefox 4, 5 or 6. I get the crash reporter Every Single time I attempt to restart. I go back to 3.6 and it works fine. Until firefox decides to automatically upgrade me to 3.6XX. Then it loses ALL my bookmarks AND will not let me

  • Grouping of data

    Hi all, How can I get the grp_id for unique combination of manager and department, grp_id should be created on asc order of manager_id. In this example manager_id 100 is minimum, so it should be grp 1 and all the employees with that manager_id should

  • Cannot link to FM document when starting new project

    Hi, We are using FM12 and RH HTML 11. We recently upgraded from TCS 4 to TCS 5. We would like to dynamically link our FM books in RH. However, the option is greyed out. We encountered the problem with TCS 4, so I don't think it is related to the upgr

  • How can I get a usable context on GNU/Linux?

    Supposedly WebGL is now enabled on Linux, but every time I try to view WebGL content it fails with this error: '''Warning: WebGL: Can't get a usable WebGL context Source File: ''http://example.com/'' Line: ''n''''' How can I enable WebGL on Linux?

  • Modifier paramètres de communicat​ion port série

    Bonjour a tous, Je souhaite réaliser un programme sous Labview pour communiquer avec un système à l'aide d'un port série. Pour cela, j'ai besoin de modifier certains paramètres de connexion cf ci-joint : IOCTL_SERIAL_SET_QUEUE_SIZE: Set queue size