Wireless keyboard does not work after waking up from idle

After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

Similar Messages

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

My keyboard does not work after cleaning :-(

Hello, I have a MacBook Pro (bought in december 2009) an now the keyboard does not work after I cleaned it. This was on thursday and today it still does not work. Any ideas?

Chances are that you've shorted the terminals on the keyboard, and will need to be replaced… When the keyboard on unibody MacBook Pro's is replaced the whole 'top case' will be done, trackpad etc… Now generally it is highly unlikely that the Liquid submersion indicators will have been activated unless the cloth was saturated with water. Also unless you purchased the AppleCare protection plan your MacBook will be out of warranty and will require an out of warranty repair.
From knowledge out of warranty repair for a top case assembly it's £163 and a level 2 hardware repair is £28

Keyboard does not work after using Support Drivers

I have a Macbook Pro 4,1 15" 2.4GHz C2D, and managed to get Bootcamp installed on it with Win7 Home Pro. I have verified that it runs correctly, but it is missing many of the drivers needed to make things run smoothly. I no longer have my Leopard disks that the machine came, so I figured the WindowsSupportDrivers would be the way to go.
When I install them and reboot, the keyboard does not work. When I hit capslock, I get the caution notice indicating underneath my password field indicating the capslock key is on, so it's not like my entire keyboard is disabled. The system is unusable right now, since I have to enter my password to login, and it does not take any keyboard input. Using an external keyboard did not resolve this issue.
I did a system restore to get it back to a usable state for the time being.
Is there an alternative to the BCA support drivers or the Leopard disk? What's going on with my keyboard after the driver update?

Maybe you have installed obsolete drivers. If you have Lion, open Boot Camp Assistant (Applications > Utilities) in OS X and download Boot Camp drivers

Wrt610n wireless network does not work after firmeware upgrade

Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
Stefan

Update -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

Wireless net does not work after installing SP1 for Vista - Error code 10

After installing Vista SP1 on my computer (T61 - Vista Business 32 bit) my intel 82566mm wireless net does not work.
Windows says "Error code 10" and suggests that I update the driver. I have downloaded the newest driver via another computer, but it does not help. Still error code 10.
Any one else has the same problem?

I fixed the problem. Uninstall iTunes and then reinstall it clean. Looks like upgrading is problematic.

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Alum BT keyboard does not work after wake up - but BT trackpad does!

Here is my set up:
MBAir 2011 model (13", i7 4GB, Lion.. all up to date)
Desktop set up (same at work and home)
- Thunderbolt display
- Aluminum Bluetooth Keyboard
- Aluminum Bluetooth Trackpad
What I do:
- Plug in the sleeping mbair into my display via thunderbolt and power cable
- Wake up using external bluetooth trackpad
- computer wakes up and external trackpad is functional (it always works)
- 7/10 times the external keyboard will not connect to enter password to get into system
     - I have tried power button banging on it for a long time and does not work
     - open mbair and type password in and remove keyboard and repair and after several tried it will work
     - then I can close mbair and use external keyboard
     - painful to do this most days at home and work
What have I tried
- PRAM, SMC reset
- remove all BT entries - trash blutooth properties files and freshly add them back
- I have tried waking using keyboard as well and it does not work
Only think I have wanted to try and have not found out is, if keyboard can reset to factory.
Yes I also have the occasionaly wifi not connecting from sleep issue

Hello
Have you noticed this problem on factory settings or only on your Windows 7 installation? Maybe its just a driver or software issue
Make also sure that latest BIOS version is installed. Look on the Toshiba website for an update:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start the update, make sure that all programs are closed and you are logged in as Administrator.

KG 1061 Wireless Keyboard Does not work

Key "a" stopped working after I haven’t used my computer for a week. Other keys seem fine.
It was working fine before. I’ve tried replacing batteries, uninstalling the keyboard and updating driver. Nothing works. Please help!

Hello @Francescalam,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the wireless keyboard on your desktop computer does not work, and I would be happy to assist you in this matter!
To re-enable the wireless keyboard for your system, I recommend following the steps in this document on Wireless Keyboard and Mouse Troubleshooting.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Wireless keyboard does not work with Safari.

Space bar does not work when using Apple Wireless Keyboard with Safari to fill web forms.
No problem with Firefox.
Early 2008 iMac, 10.10.1, 6GB Ram

Im going to assume you are using the Apple Wireless Keyboard with your devices.
Whats probabaly happening is both of your devices are trying to connect to your keyboard at the same time and it is causing it to not function properly.
I suggest you disable bluetooth on the device you AREN'T using and try it again with the one you ARE using.
If this doesn't solve your issue, try re-pairing the keyboard with the iPad you wish to use it with. It may have just not made a strong connection.
Hope these suggestions help!

Wireless Keyboard functions not working after upgrade

I have a HP Pavillion Elite m9080a desktop with a wireless keyboard 5189URF Running originaly on Vista but last week I upgraded to Windows 7 Home Premium. My problem is that the feature buttons on my keyboard are not working ie no volume control, CD/DVD controls not working, typing is ok. Also the caps lock / number lock icon is not appearing on the task bar. Also on my Monitor w2207h the two USB outlets are not working either. I need help please to restore these functions.

Yes.. its for windows vista.. run it with recomended settings..
if it dosent work then try following..
go to your device manager and see can you see some devices named " unknows devices"
if yes then >
Try following some steps
go to your device manager > right click on unknown devices > go to Properties > then Details tag
select from drop down list called Hardware ID's (PCI\VEN...) Copy it via right click...
and search it according to it on google or any serch engine you will get the right drivers..
here are the print shoot of process!
Hope it helps!
**Clicking on the Kudos! white star is a nice way to say thank you on any post that helped you or resolved the problem.**
**Selecting "Accept as Solution" for a reply that solves your issue helps others who are searching the web for an answer**

W510 eSATA/USB2.0 combo port does not respond after waking up from sleep mode

Has anyone tried to connect external DVD/CD player or burner to the eSATA/USB combo port and experienced very slow system performance after waking up from sleep mode? It might takes minutes to launch an application program that usually takes just few seconds. My W510 can not even restart. It will just stop at the Thinkpad logo if I tried to restart after waking up from sleep.
The funny thing is if I moved the external DVD/CD player to the USB2.0 port in the back, everything went back to normal. I don't know if this has anything to do with the fact that the combo port has something to do with eSATA.
Thanks

It seems that this problem is unique to my system. I am hoping that one of the Mac Guru's will have at least a pointer in the right direction.
Thanks.

Intel wireless iwl3945 does not work after kernel upgrade?

My wireless ethernet will not longer connect to access points. I am on a Toshiba Tecra M5-S4332 running kernel 2.6.39.2-1 with linux-firmware 20110512-2 installed. This problem seemed to have started once I upgraded the kernel from 2.6.39.1-1, but I have tried downgrading (back to 2.6.38) and upgrading (to 3.0-rc6) the kernel to no avail. Other possibly relevant packages that were upgraded at that system upgrade were module-init-tools (3.13-1 -> 3.16-1), mkinitcpio (0.6.14-1 -> 0.6.15-1), nvidia-utils (270.41.19-1 -> 275.09.07-1), nvidia (270.41.19-3 -> 275.09.07-1), and netcfg (2.5.5-1 -> 2.6.1-1).
My complete dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 27 21:26:22 CEST 2011
[ 0.000000] Command line: root=/dev/sda3 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
[ 0.000000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec28000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: TOSHIBA TECRA M/Portable PC, BIOS Version 3.40 05/28/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FEDA0000 mask FFFFE0000 write-back
[ 0.000000] 1 base 0FFF00000 mask FFFF00000 write-protect
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ cff8a000-cff90000
[ 0.000000] RAMDISK: 37ddb000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f01e0 00014 (v00 TOSHIB)
[ 0.000000] ACPI: RSDT 00000000cff90000 0004C (v01 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: FACP 00000000cff90074 00084 (v02 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: DSDT 00000000cff900f8 07B63 (v02 TOSHIB A003B 20070222 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000000eee00 00040
[ 0.000000] ACPI: SSDT 00000000cff97c5b 00306 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.000000] ACPI: BOOT 00000000cff9004c 00028 (v01 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: APIC 00000000cff98813 00068 (v01 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: MCFG 00000000cff9887b 0003C (v01 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: HPET 00000000cff988b7 00038 (v01 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: TCPA 00000000cff988ef 00032 (v02 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: SLIC 00000000cff98921 00176 (v01 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: SSDT 00000000cff98a97 00076 (v02 TOSHIB A003B 20060912 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 00000000cff98b0d 00327 (v02 TOSHIB A003B 20061102 MSFT 0100000E)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000cff90000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-00000000cff90000
[ 0.000000] NODE_DATA [00000000cff85000 - 00000000cff89fff]
[ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800cc200000-ffff8800ceffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] On node 0 totalpages: 851743
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11591 pages used for memmap
[ 0.000000] DMA32 zone: 836169 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xd808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000
[ 0.000000] PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000
[ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s83136 r8192 d23360 u1048576
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 840091
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3347820k/3407424k available (4019k kernel code, 452k absent, 59152k reserved, 3335k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 27262976 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.050 MHz processor.
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.35 BogoMIPS (lpj=6650166)
[ 0.003494] pid_max: default: 32768 minimum: 301
[ 0.003694] Security Framework initialized
[ 0.003778] AppArmor: AppArmor disabled by boot time parameter
[ 0.004309] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009415] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011099] Mount-cache hash table entries: 256
[ 0.011683] Initializing cgroup subsys ns
[ 0.011765] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.011858] Initializing cgroup subsys cpuacct
[ 0.011970] Initializing cgroup subsys memory
[ 0.012068] Initializing cgroup subsys devices
[ 0.012147] Initializing cgroup subsys freezer
[ 0.012223] Initializing cgroup subsys net_cls
[ 0.012300] Initializing cgroup subsys blkio
[ 0.012440] CPU: Physical Processor ID: 0
[ 0.012517] CPU: Processor Core ID: 0
[ 0.012593] mce: CPU supports 6 MCE banks
[ 0.012675] CPU0: Thermal monitoring handled by SMI
[ 0.012681] using mwait in idle threads.
[ 0.014125] ACPI: Core revision 20110316
[ 0.018114] ftrace: allocating 15965 entries in 63 pages
[ 0.020057] Setting APIC routing to flat
[ 0.020510] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056062] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 0.056663] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.056663] PEBS disabled due to CPU errata.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073453] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100008] Booting Node 0, Processors #1 Ok.
[ 0.100146] smpboot cpu 1: start_ip = 9a000
[ 0.006666] CPU1: Thermal monitoring handled by SMI
[ 0.196691] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.203326] Brought up 2 CPUs
[ 0.203404] Total of 2 processors activated (7983.62 BogoMIPS).
[ 0.204795] devtmpfs: initialized
[ 0.207100] PM: Registering ACPI NVS region at eee00 (512 bytes)
[ 0.207684] print_constraints: dummy:
[ 0.207851] NET: Registered protocol family 16
[ 0.208056] ACPI: bus type pci registered
[ 0.208302] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.208397] PCI: not using MMCONFIG
[ 0.208471] PCI: Using configuration type 1 for base access
[ 0.209016] bio: create slab <bio-0> at 0
[ 0.211054] ACPI: EC: Look up EC in DSDT
[ 0.212357] ACPI: Actual Package length (12) is larger than NumElements field (4), truncated
[ 0.212511]
[ 0.214491] ACPI: SSDT 00000000cff982a3 000F3 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.214999] ACPI: Dynamic OEM Table Load:
[ 0.215194] ACPI: SSDT (null) 000F3 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.215455] ACPI: SSDT 00000000cff9840c 0034E (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.215954] ACPI: Dynamic OEM Table Load:
[ 0.216148] ACPI: SSDT (null) 0034E (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.216495] ACPI: SSDT 00000000cff98396 00076 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.216949] ACPI: Dynamic OEM Table Load:
[ 0.217144] ACPI: SSDT (null) 00076 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.217381] ACPI: SSDT 00000000cff9875a 00079 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.217882] ACPI: Dynamic OEM Table Load:
[ 0.218158] ACPI: SSDT (null) 00079 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.218524] ACPI: Interpreter enabled
[ 0.218602] ACPI: (supports S0 S3 S4 S5)
[ 0.218924] ACPI: Using IOAPIC for interrupt routing
[ 0.219016] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.227009] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.271058] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.271139] HEST: Table not found.
[ 0.271215] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.271475] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.271657] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.271660] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.271663] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.271666] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.271668] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xefffffff] (ignored)
[ 0.271671] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfebfffff] (ignored)
[ 0.271674] pci_root PNP0A08:00: host bridge window [mem 0xfec28000-0xfecfffff] (ignored)
[ 0.271676] pci_root PNP0A08:00: host bridge window [mem 0xfed00400-0xfed13fff] (ignored)
[ 0.271679] pci_root PNP0A08:00: host bridge window [mem 0xfed1a000-0xfed1bfff] (ignored)
[ 0.271681] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.271684] pci_root PNP0A08:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored)
[ 0.271687] pci_root PNP0A08:00: host bridge window [mem 0xfedc0000-0xfedfffff] (ignored)
[ 0.271689] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffafffff] (ignored)
[ 0.271692] pci_root PNP0A08:00: host bridge window [mem 0xffc00000-0xffdfffff] (ignored)
[ 0.271704] pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
[ 0.271752] pci 0000:00:01.0: [8086:27a1] type 1 class 0x000604
[ 0.271790] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.271794] pci 0000:00:01.0: PME# disabled
[ 0.271860] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.271882] pci 0000:00:1b.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.271965] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271970] pci 0000:00:1b.0: PME# disabled
[ 0.271999] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.272083] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.272088] pci 0000:00:1c.0: PME# disabled
[ 0.272120] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.272205] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.272210] pci 0000:00:1c.1: PME# disabled
[ 0.272243] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.272328] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.272333] pci 0000:00:1c.2: PME# disabled
[ 0.272367] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.272424] pci 0000:00:1d.0: reg 20: [io 0xafe0-0xafff]
[ 0.272464] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.272521] pci 0000:00:1d.1: reg 20: [io 0xaf80-0xaf9f]
[ 0.272561] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.272617] pci 0000:00:1d.2: reg 20: [io 0xaf60-0xaf7f]
[ 0.272657] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.272713] pci 0000:00:1d.3: reg 20: [io 0xaf40-0xaf5f]
[ 0.272765] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.272790] pci 0000:00:1d.7: reg 10: [mem 0xffaffc00-0xffafffff]
[ 0.272879] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.272885] pci 0000:00:1d.7: PME# disabled
[ 0.272909] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.272995] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.273109] pci 0000:00:1f.0: quirk: [io 0xd800-0xd87f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.273206] pci 0000:00:1f.0: quirk: [io 0xeec0-0xeeff] claimed by ICH6 GPIO
[ 0.273322] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.273466] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.273487] pci 0000:00:1f.2: reg 10: [io 0xaf38-0xaf3f]
[ 0.273500] pci 0000:00:1f.2: reg 14: [io 0xaf34-0xaf37]
[ 0.273512] pci 0000:00:1f.2: reg 18: [io 0xaf28-0xaf2f]
[ 0.273524] pci 0000:00:1f.2: reg 1c: [io 0xaf24-0xaf27]
[ 0.273536] pci 0000:00:1f.2: reg 20: [io 0xaf10-0xaf1f]
[ 0.273581] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.273586] pci 0000:00:1f.2: PME# disabled
[ 0.273651] pci 0000:01:00.0: [10de:01da] type 0 class 0x000300
[ 0.273667] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.273685] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.273703] pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.273725] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.273775] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.273876] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.273947] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.273950] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.273955] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.274108] pci 0000:02:00.0: [8086:109a] type 0 class 0x000200
[ 0.274139] pci 0000:02:00.0: reg 10: [mem 0xffde0000-0xffdfffff]
[ 0.274181] pci 0000:02:00.0: reg 18: [io 0xcfe0-0xcfff]
[ 0.274322] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.274330] pci 0000:02:00.0: PME# disabled
[ 0.274367] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.274526] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.274597] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.274602] pci 0000:00:1c.0: bridge window [mem 0xffd00000-0xffdfffff]
[ 0.274610] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.274672] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.274743] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.274748] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.274756] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.274876] pci 0000:05:00.0: [8086:4222] type 0 class 0x000280
[ 0.274932] pci 0000:05:00.0: reg 10: [mem 0xffcff000-0xffcfffff]
[ 0.276851] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.276864] pci 0000:05:00.0: PME# disabled
[ 0.276934] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.277043] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.277114] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.277119] pci 0000:00:1c.2: bridge window [mem 0xffc00000-0xffcfffff]
[ 0.277127] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.277197] pci 0000:06:0b.0: [104c:8039] type 2 class 0x000607
[ 0.277223] pci 0000:06:0b.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.277252] pci 0000:06:0b.0: supports D1 D2
[ 0.277254] pci 0000:06:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.277261] pci 0000:06:0b.0: PME# disabled
[ 0.277286] pci 0000:06:0b.1: [104c:803a] type 0 class 0x000c00
[ 0.277312] pci 0000:06:0b.1: reg 10: [mem 0x00000000-0x000007ff]
[ 0.277327] pci 0000:06:0b.1: reg 14: [mem 0x00000000-0x00003fff]
[ 0.277418] pci 0000:06:0b.1: supports D1 D2
[ 0.277421] pci 0000:06:0b.1: PME# supported from D0 D1 D2 D3hot
[ 0.277427] pci 0000:06:0b.1: PME# disabled
[ 0.277454] pci 0000:06:0b.3: [104c:803c] type 0 class 0x000805
[ 0.277479] pci 0000:06:0b.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.277580] pci 0000:06:0b.3: supports D1 D2
[ 0.277582] pci 0000:06:0b.3: PME# supported from D0 D1 D2 D3hot
[ 0.277588] pci 0000:06:0b.3: PME# disabled
[ 0.277643] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[ 0.277716] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.277722] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.277730] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.277733] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.277736] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.277790] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[ 0.277903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.277967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.278039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.278076] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXCB._PRT]
[ 0.278108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MPEX._PRT]
[ 0.278144] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.278295] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.278836] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.281796] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[ 0.282073] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
[ 0.282602] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
[ 0.283130] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
[ 0.283636] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
[ 0.284164] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
[ 0.284691] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
[ 0.285223] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
[ 0.285810] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.285895] vgaarb: loaded
[ 0.286058] PCI: Using ACPI for IRQ routing
[ 0.286126] PCI: pci_cache_line_size set to 64 bytes
[ 0.286226] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.286229] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.286371] NetLabel: Initializing
[ 0.286437] NetLabel: domain hash size = 128
[ 0.286504] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.286586] NetLabel: unlabeled traffic allowed by default
[ 0.286664] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.286739] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.287010] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.296665] Switching to clocksource hpet
[ 0.299803] Switched to NOHz mode on CPU #0
[ 0.299891] Switched to NOHz mode on CPU #1
[ 0.304354] pnp: PnP ACPI init
[ 0.304444] ACPI: bus type pnp registered
[ 0.305074] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.305077] pnp 00:00: [mem 0x000e0000-0x000fffff]
[ 0.305079] pnp 00:00: [mem 0x00100000-0xcff8ffff]
[ 0.305081] pnp 00:00: [mem 0xcff90000-0xcff9ffff]
[ 0.305084] pnp 00:00: [mem 0xcffa0000-0xcfffffff]
[ 0.305086] pnp 00:00: [mem 0xfec00000-0xfec27fff]
[ 0.305088] pnp 00:00: [mem 0xfed14000-0xfed19fff]
[ 0.305090] pnp 00:00: [mem 0xfed1c000-0xfed1ffff]
[ 0.305092] pnp 00:00: [mem 0xfed20000-0xfed3ffff]
[ 0.305094] pnp 00:00: [mem 0xfed45000-0xfed8ffff]
[ 0.305096] pnp 00:00: [mem 0xfeda0000-0xfedbffff]
[ 0.305098] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[ 0.305100] pnp 00:00: [mem 0xffb00000-0xffbfffff]
[ 0.305102] pnp 00:00: [mem 0xffe00000-0xffffffff]
[ 0.305176] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.305248] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.305318] system 00:00: [mem 0x00100000-0xcff8ffff] could not be reserved
[ 0.305389] system 00:00: [mem 0xcff90000-0xcff9ffff] has been reserved
[ 0.305459] system 00:00: [mem 0xcffa0000-0xcfffffff] has been reserved
[ 0.305530] system 00:00: [mem 0xfec00000-0xfec27fff] could not be reserved
[ 0.305600] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.305671] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.305741] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.305812] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.305882] system 00:00: [mem 0xfeda0000-0xfedbffff] has been reserved
[ 0.305952] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.306023] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.306097] system 00:00: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.306169] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.320363] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[ 0.320409] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.320482] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.346696] pnp 00:02: [bus 00-ff]
[ 0.346698] pnp 00:02: [io 0x0cf8-0x0cff]
[ 0.346701] pnp 00:02: [io 0x0000-0x0cf7 window]
[ 0.346703] pnp 00:02: [io 0x0d00-0xffff window]
[ 0.346705] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[ 0.346708] pnp 00:02: [mem 0x000d0000-0x000dffff window]
[ 0.346710] pnp 00:02: [mem 0xd0000000-0xefffffff window]
[ 0.346712] pnp 00:02: [mem 0xf4000000-0xfebfffff window]
[ 0.346714] pnp 00:02: [mem 0xfec28000-0xfecfffff window]
[ 0.346717] pnp 00:02: [mem 0xfed00400-0xfed13fff window]
[ 0.346719] pnp 00:02: [mem 0xfed1a000-0xfed1bfff window]
[ 0.346721] pnp 00:02: [mem 0xfed40000-0xfed44fff window]
[ 0.346724] pnp 00:02: [mem 0xfed90000-0xfed9ffff window]
[ 0.346726] pnp 00:02: [mem 0xfedc0000-0xfedfffff window]
[ 0.346728] pnp 00:02: [mem 0xfee01000-0xffafffff window]
[ 0.346730] pnp 00:02: [mem 0xffc00000-0xffdfffff window]
[ 0.346792] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.346941] pnp 00:03: [io 0x0000-0x000f]
[ 0.346943] pnp 00:03: [io 0x0081-0x0083]
[ 0.346945] pnp 00:03: [io 0x0087]
[ 0.346947] pnp 00:03: [io 0x0089-0x008b]
[ 0.346949] pnp 00:03: [io 0x008f]
[ 0.346951] pnp 00:03: [io 0x00c0-0x00df]
[ 0.346953] pnp 00:03: [dma 4]
[ 0.346985] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.347002] pnp 00:04: [io 0x0061]
[ 0.347037] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.347048] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.347060] pnp 00:05: [irq 13]
[ 0.347091] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.347116] pnp 00:06: [io 0x0060]
[ 0.347119] pnp 00:06: [io 0x0064]
[ 0.347125] pnp 00:06: [irq 1]
[ 0.347157] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.347183] pnp 00:07: [irq 12]
[ 0.347219] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.347230] pnp 00:08: [io 0x0070-0x0071]
[ 0.347236] pnp 00:08: [irq 8]
[ 0.347268] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.347639] pnp 00:09: [io 0x0080]
[ 0.347641] pnp 00:09: [io 0x0084-0x0086]
[ 0.347643] pnp 00:09: [io 0x0088]
[ 0.347645] pnp 00:09: [io 0x008c-0x008e]
[ 0.347647] pnp 00:09: [io 0x002e-0x002f]
[ 0.347649] pnp 00:09: [io 0x0062]
[ 0.347650] pnp 00:09: [io 0x0066]
[ 0.347652] pnp 00:09: [io 0x0480-0x048f]
[ 0.347654] pnp 00:09: [io 0xe000-0xe07f]
[ 0.347656] pnp 00:09: [io 0xe080-0xe0ff]
[ 0.347658] pnp 00:09: [io 0xe400-0xe47f]
[ 0.347660] pnp 00:09: [io 0xe480-0xe4ff]
[ 0.347662] pnp 00:09: [io 0xe800-0xe87f]
[ 0.347664] pnp 00:09: [io 0xe880-0xe8ff]
[ 0.347666] pnp 00:09: [io 0xec00-0xec7f]
[ 0.347667] pnp 00:09: [io 0xec80-0xecff]
[ 0.347669] pnp 00:09: [io 0xd800-0xd87f]
[ 0.347671] pnp 00:09: [io 0xd880-0xd89f]
[ 0.347673] pnp 00:09: [io 0xeeb0-0xeebf]
[ 0.347675] pnp 00:09: [io 0xeec0-0xeeff]
[ 0.347677] pnp 00:09: [io 0x0690-0x06ff]
[ 0.347679] pnp 00:09: [io 0x0010-0x001f]
[ 0.347681] pnp 00:09: [io 0x0024-0x0025]
[ 0.347683] pnp 00:09: [io 0x0028-0x0029]
[ 0.347685] pnp 00:09: [io 0x002c-0x002d]
[ 0.347686] pnp 00:09: [io 0x0030-0x0031]
[ 0.347692] pnp 00:09: [io 0x0034-0x0035]
[ 0.347694] pnp 00:09: [io 0x0038-0x0039]
[ 0.347696] pnp 00:09: [io 0x003c-0x003d]
[ 0.347698] pnp 00:09: [io 0x0050-0x0053]
[ 0.347700] pnp 00:09: [io 0x0063]
[ 0.347701] pnp 00:09: [io 0x0065]
[ 0.347703] pnp 00:09: [io 0x0072-0x0077]
[ 0.347705] pnp 00:09: [io 0x0090-0x009f]
[ 0.347707] pnp 00:09: [io 0x00a4-0x00a5]
[ 0.347709] pnp 00:09: [io 0x00a8-0x00a9]
[ 0.347711] pnp 00:09: [io 0x00ac-0x00ad]
[ 0.347713] pnp 00:09: [io 0x00b0-0x00b5]
[ 0.347715] pnp 00:09: [io 0x00b8-0x00b9]
[ 0.347717] pnp 00:09: [io 0x00bc-0x00bd]
[ 0.347719] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.347814] system 00:09: [io 0x0480-0x048f] has been reserved
[ 0.347884] system 00:09: [io 0xe000-0xe07f] has been reserved
[ 0.347954] system 00:09: [io 0xe080-0xe0ff] has been reserved
[ 0.348023] system 00:09: [io 0xe400-0xe47f] has been reserved
[ 0.348092] system 00:09: [io 0xe480-0xe4ff] has been reserved
[ 0.348161] system 00:09: [io 0xe800-0xe87f] has been reserved
[ 0.348231] system 00:09: [io 0xe880-0xe8ff] has been reserved
[ 0.348300] system 00:09: [io 0xec00-0xec7f] has been reserved
[ 0.348372] system 00:09: [io 0xec80-0xecff] has been reserved
[ 0.348442] system 00:09: [io 0xd800-0xd87f] has been reserved
[ 0.348511] system 00:09: [io 0xd880-0xd89f] has been reserved
[ 0.348580] system 00:09: [io 0xeeb0-0xeebf] has been reserved
[ 0.348649] system 00:09: [io 0xeec0-0xeeff] has been reserved
[ 0.348719] system 00:09: [io 0x0690-0x06ff] has been reserved
[ 0.348790] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.348860] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373796] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.373798] pnp 00:0a: [io 0x004e-0x004f]
[ 0.373800] pnp 00:0a: [io 0x0680-0x068f]
[ 0.373836] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.373854] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.373888] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.400457] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.400464] pnp 00:0c: [irq 4]
[ 0.427076] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.453838] pnp 00:0d: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 0.480366] pnp: PnP ACPI: found 14 devices
[ 0.480434] ACPI: ACPI bus type pnp unregistered
[ 0.487001] pci 0000:00:1e.0: BAR 15: assigned [mem 0xd0000000-0xd3ffffff pref]
[ 0.487085] pci 0000:00:1e.0: BAR 14: assigned [mem 0xd4000000-0xd9ffffff]
[ 0.487157] pci 0000:00:1b.0: BAR 0: assigned [mem 0xda000000-0xda003fff 64bit]
[ 0.487245] pci 0000:00:1b.0: BAR 0: set to [mem 0xda000000-0xda003fff 64bit] (PCI address [0xda000000-0xda003fff])
[ 0.487331] pci 0000:00:1e.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.487402] pci 0000:00:1c.1: BAR 15: assigned [mem 0xda100000-0xda2fffff 64bit pref]
[ 0.487485] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.487555] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.487623] pci 0000:00:01.0: bridge window [io disabled]
[ 0.487693] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.487765] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.487849] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.487918] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.487991] pci 0000:00:1c.0: bridge window [mem 0xffd00000-0xffdfffff]
[ 0.488064] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.488138] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.488208] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.488282] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.488355] pci 0000:00:1c.1: bridge window [mem 0xda100000-0xda2fffff 64bit pref]
[ 0.488441] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.488508] pci 0000:00:1c.2: bridge window [io disabled]
[ 0.488581] pci 0000:00:1c.2: bridge window [mem 0xffc00000-0xffcfffff]
[ 0.488654] pci 0000:00:1c.2: bridge window [mem pref disabled]
[ 0.488730] pci 0000:06:0b.0: BAR 15: assigned [mem 0xd0000000-0xd3ffffff pref]
[ 0.488811] pci 0000:06:0b.0: BAR 16: assigned [mem 0xd4000000-0xd7ffffff]
[ 0.488882] pci 0000:06:0b.1: BAR 1: assigned [mem 0xd8000000-0xd8003fff]
[ 0.488956] pci 0000:06:0b.1: BAR 1: set to [mem 0xd8000000-0xd8003fff] (PCI address [0xd8000000-0xd8003fff])
[ 0.489041] pci 0000:06:0b.0: BAR 0: assigned [mem 0xd8004000-0xd8004fff]
[ 0.489115] pci 0000:06:0b.0: BAR 0: set to [mem 0xd8004000-0xd8004fff] (PCI address [0xd8004000-0xd8004fff])
[ 0.489200] pci 0000:06:0b.1: BAR 0: assigned [mem 0xd8005000-0xd80057ff]
[ 0.489274] pci 0000:06:0b.1: BAR 0: set to [mem 0xd8005000-0xd80057ff] (PCI address [0xd8005000-0xd80057ff])
[ 0.489358] pci 0000:06:0b.0: BAR 13: assigned [io 0x1000-0x10ff]
[ 0.489427] pci 0000:06:0b.0: BAR 14: assigned [io 0x1400-0x14ff]
[ 0.489497] pci 0000:06:0b.3: BAR 0: assigned [mem 0xd8005800-0xd80058ff]
[ 0.489572] pci 0000:06:0b.3: BAR 0: set to [mem 0xd8005800-0xd80058ff] (PCI address [0xd8005800-0xd80058ff])
[ 0.489656] pci 0000:06:0b.0: CardBus bridge to [bus 07-0a]
[ 0.489724] pci 0000:06:0b.0: bridge window [io 0x1000-0x10ff]
[ 0.489796] pci 0000:06:0b.0: bridge window [io 0x1400-0x14ff]
[ 0.489871] pci 0000:06:0b.0: bridge window [mem 0xd0000000-0xd3ffffff pref]
[ 0.489954] pci 0000:06:0b.0: bridge window [mem 0xd4000000-0xd7ffffff]
[ 0.490039] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[ 0.490108] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.490182] pci 0000:00:1e.0: bridge window [mem 0xd4000000-0xd9ffffff]
[ 0.490254] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd3ffffff pref]
[ 0.490349] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.490420] pci 0000:00:01.0: setting latency timer to 64
[ 0.490429] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.490502] pci 0000:00:1c.0: setting latency timer to 64
[ 0.490510] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.490583] pci 0000:00:1c.1: setting latency timer to 64
[ 0.490592] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.490665] pci 0000:00:1c.2: setting latency timer to 64
[ 0.490673] pci 0000:00:1e.0: setting latency timer to 64
[ 0.490682] pci 0000:06:0b.0: enabling device (0000 -> 0003)
[ 0.490756] pci 0000:06:0b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.490832] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.490834] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.490837] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfdffffff]
[ 0.490840] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.490842] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.490845] pci_bus 0000:02: resource 1 [mem 0xffd00000-0xffdfffff]
[ 0.490847] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.490849] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.490852] pci_bus 0000:03: resource 2 [mem 0xda100000-0xda2fffff 64bit pref]
[ 0.490855] pci_bus 0000:05: resource 1 [mem 0xffc00000-0xffcfffff]
[ 0.490857] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 0.490859] pci_bus 0000:06: resource 1 [mem 0xd4000000-0xd9ffffff]
[ 0.490862] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd3ffffff pref]
[ 0.490864] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.490867] pci_bus 0000:06: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.490869] pci_bus 0000:07: resource 0 [io 0x1000-0x10ff]
[ 0.490872] pci_bus 0000:07: resource 1 [io 0x1400-0x14ff]
[ 0.490874] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd3ffffff pref]
[ 0.490877] pci_bus 0000:07: resource 3 [mem 0xd4000000-0xd7ffffff]
[ 0.490963] NET: Registered protocol family 2
[ 0.491248] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.492732] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.499013] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.499934] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.500037] TCP reno registered
[ 0.500113] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.500238] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.500664] NET: Registered protocol family 1
[ 0.500886] pci 0000:01:00.0: Boot video device
[ 0.500912] PCI: CLS 32 bytes, default 64
[ 0.500979] Unpacking initramfs...
[ 0.535672] Freeing initrd memory: 2132k freed
[ 0.536590] Simple Boot Flag value 0xb read from CMOS RAM was invalid
[ 0.536662] Simple Boot Flag at 0x7c set to 0x1
[ 0.537206] audit: initializing netlink socket (disabled)
[ 0.537289] type=2000 audit(1310243563.536:1): initialized
[ 0.537864] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.540443] VFS: Disk quotas dquot_6.5.2
[ 0.540667] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.540930] msgmni has been set to 6542
[ 0.541262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.541390] io scheduler noop registered
[ 0.541459] io scheduler deadline registered
[ 0.541578] io scheduler cfq registered (default)
[ 0.541776] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.541814] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.541889] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.541942] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.542049] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.542102] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.542218] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.542271] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.542391] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.542462] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.542533] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.542560] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.542631] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.542704] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.542725] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.542799] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.542821] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.542891] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.542964] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.543061] intel_idle: MWAIT substates: 0x22220
[ 0.543063] intel_idle: does not run on family 6 model 15
[ 0.543073] ERST: Table is not found!
[ 0.543213] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.564034] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.757615] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.810208] Linux agpgart interface v0.103
[ 0.810379] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.814755] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.814861] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.815104] mousedev: PS/2 mouse device common for all mice
[ 0.815258] rtc_cmos 00:08: RTC can wake from S4
[ 0.834943] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.836797] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.836896] rtc0: alarms up to one year, 114 bytes nvram, hpet irqs
[ 0.836976] cpuidle: using governor ladder
[ 0.837042] cpuidle: using governor menu
[ 0.837348] TCP cubic registered
[ 0.837415] NET: Registered protocol family 17
[ 0.837490] Registering the dns_resolver key type
[ 0.837659] PM: Hibernation image not present or could not be loaded.
[ 0.837665] registered taskstats version 1
[ 0.838340] rtc_cmos 00:08: setting system clock to 2011-07-09 20:32:44 UTC (1310243564)
[ 0.838465] Initializing network drop monitor service
[ 0.840013] Freeing unused kernel memory: 712k freed
[ 0.840372] Write protecting the kernel read-only data: 6144k
[ 0.840765] Freeing unused kernel memory: 60k freed
[ 0.844098] Freeing unused kernel memory: 784k freed
[ 0.855991] udevd[48]: starting version 171
[ 0.939897] usbcore: registered new interface driver usbfs
[ 0.940955] usbcore: registered new interface driver hub
[ 0.941892] usbcore: registered new device driver usb
[ 0.969586] SCSI subsystem initialized
[ 0.976084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.976200] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.976293] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.976297] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.976415] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.983378] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.983460] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.987430] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.987451] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffaffc00
[ 0.999115] libata version 3.00 loaded.
[ 1.000039] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.000272] hub 1-0:1.0: USB hub found
[ 1.000342] hub 1-0:1.0: 8 ports detected
[ 1.002403] ata_piix 0000:00:1f.2: version 2.13
[ 1.002506] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.002584] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.005170] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.153375] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.153767] scsi0 : ata_piix
[ 1.153945] scsi1 : ata_piix
[ 1.154611] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xaf10 irq 14
[ 1.154682] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xaf18 irq 15
[ 1.154800] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.154904] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.154923] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.155059] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.160051] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000afe0
[ 1.160289] hub 2-0:1.0: USB hub found
[ 1.160360] hub 2-0:1.0: 2 ports detected
[ 1.160502] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.160577] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.160581] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.160655] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.180052] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000af80
[ 1.180261] hub 3-0:1.0: USB hub found
[ 1.180332] hub 3-0:1.0: 2 ports detected
[ 1.180469] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.180544] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.180548] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.180622] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.206720] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000af60
[ 1.206935] hub 4-0:1.0: USB hub found
[ 1.207006] hub 4-0:1.0: 2 ports detected
[ 1.207144] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.207220] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.207224] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.207298] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.216718] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000af40
[ 1.216926] hub 5-0:1.0: USB hub found
[ 1.216996] hub 5-0:1.0: 2 ports detected
[ 1.313799] ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001M, max UDMA/100
[ 1.313873] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.320342] ata1.00: configured for UDMA/100
[ 1.320580] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5
[ 1.331080] ata2.00: ATAPI: PIONEER DVD-RW DVR-K16S, 1.17, max UDMA/33
[ 1.360458] ata2.00: configured for UDMA/33
[ 1.383510] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K16S 1.17 PQ: 0 ANSI: 5
[ 1.395021] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.395170] sd 0:0:0:0: [sda] Write Protect is off
[ 1.395242] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.395268] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.409585] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.409668] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.410066] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.429811] sda: sda1 sda2 sda3 sda4
[ 1.430324] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.486697] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 1.540020] Refined TSC clocksource calibration: 1994.999 MHz.
[ 1.540095] Switching to clocksource tsc
[ 2.014954] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.951205] udevd[245]: starting version 171
[ 4.375423] Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[ 4.377182] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 4.464646] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 4.464694] ACPI: Lid Switch [LID]
[ 4.464751] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.464757] ACPI: Power Button [PWRB]
[ 4.464806] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.464810] ACPI: Power Button [PWRF]
[ 4.468874] acpi device:1e: registered as cooling_device0
[ 4.469003] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input4
[ 4.469010] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 4.470072] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.470966] ACPI: AC Adapter [ADP1] (on-line)
[ 4.472259] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.472266] ACPI: Battery Slot [BAT1] (battery present)
[ 4.472287] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.472294] ACPI: Battery Slot [BAT2] (battery absent)
[ 4.511094] iTCO_vendor_support: vendor-support=0
[ 4.639541] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.639544] ACPI: Thermal Zone [THRM] (43 C)
[ 4.693186] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 4.693282] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0xd860)
[ 4.693360] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.711995] parport_pc 00:0d: [io 0x0378-0x037a]
[ 4.712003] parport_pc 00:0d: [io 0x0778-0x077a]
[ 4.712080] parport_pc 00:0d: [irq 7]
[ 4.712083] parport_pc 00:0d: [dma 1]
[ 4.721387] sdhci: Secure Digital Host Controller Interface driver
[ 4.721390] sdhci: Copyright(c) Pierre Ossman
[ 4.723125] sdhci-pci 0000:06:0b.3: SDHCI controller found [104c:803c] (rev 0)
[ 4.723223] sdhci-pci 0000:06:0b.3: enabling device (0000 -> 0002)
[ 4.723232] sdhci-pci 0000:06:0b.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 4.723275] _regulator_get: 0000:06:0b.3 supply vmmc not found, using dummy regulator
[ 4.723317] Registered led device: mmc0::
[ 4.723379] mmc0: SDHCI controller on PCI [0000:06:0b.3] using DMA
[ 4.737354] parport_pc 00:0d: activated
[ 4.737359] parport_pc 00:0d: reported by Plug and Play ACPI
[ 4.737430] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 4.820210] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4.927881] intel_rng: FWH not detected
[ 4.960488] ppdev: user-space parallel port driver
[ 4.964564] leds_ss4200: no LED devices found
[ 5.067658] cfg80211: Calling CRDA to update world regulatory domain
[ 5.084335] firewire_ohci 0000:06:0b.1: enabling device (0000 -> 0002)
[ 5.084352] firewire_ohci 0000:06:0b.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 5.136777] firewire_ohci: Added fw-ohci device 0000:06:0b.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 5.336838] input: Toshiba input device as /devices/virtual/input/input5
[ 5.336895] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 5.336897] toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
[ 5.337522] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.344122] Registered led device: toshiba::illumination
[ 5.348189] ACPI: acpi_idle registered with cpuidle
[ 5.348320] Marking TSC unstable due to TSC halts in idle
[ 5.348764] Switching to clocksource hpet
[ 5.510961] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[ 5.530064] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 5.530067] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 5.530097] e1000e 0000:02:00.0: Disabling ASPM L1
[ 5.530118] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.530141] e1000e 0000:02:00.0: setting latency timer to 64
[ 5.530347] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 5.530741] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 5.542011] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8
[ 5.611580] yenta_cardbus 0000:06:0b.0: CardBus bridge found [1179:0001]
[ 5.611604] yenta_cardbus 0000:06:0b.0: Enabling burst memory read transactions
[ 5.611610] yenta_cardbus 0000:06:0b.0: Using CSCINT to route CSC interrupts to PCI
[ 5.611613] yenta_cardbus 0000:06:0b.0: Routing CardBus interrupts to PCI
[ 5.611619] yenta_cardbus 0000:06:0b.0: TI: mfunc 0x01aa1022, devctl 0x64
[ 5.636892] firewire_core: created device fw0: GUID 0000390000886031, S400
[ 5.654088] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:b7:a8:5b:e9
[ 5.654091] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 5.654169] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: FFFFFF-0FF
[ 5.696863] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.696933] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.813113] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5.813119] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5.813126] HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 5.813140] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.813203] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 5.813240] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.844531] yenta_cardbus 0000:06:0b.0: ISA IRQ mask 0x0c78, PCI irq 21
[ 5.844536] yenta_cardbus 0000:06:0b.0: Socket status: 30000006
[ 5.844541] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 5.844554] yenta_cardbus 0000:06:0b.0: pcmcia: parent PCI bridge window: [io 0x1000-0x1fff]
[ 5.844557] yenta_cardbus 0000:06:0b.0: pcmcia: parent PCI bridge window: [mem 0xd4000000-0xd9ffffff]
[ 5.844561] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4000000-0xd9ffffff: excluding 0xd4000000-0xd81fffff
[ 5.844574] yenta_cardbus 0000:06:0b.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd3ffffff pref]
[ 5.844577] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd3ffffff: excluding 0xd0000000-0xd3ffffff
[ 5.879954] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 5.879958] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 5.880080] iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.880095] iwl3945 0000:05:00.0: setting latency timer to 64
[ 5.921779] vboxdrv: Found 2 processor cores.
[ 5.922150] VBoxDrv: dbg - g_abExecMemory=ffffffffa05e5360
[ 5.922177] vboxdrv: fAsync=0 offMin=0x3c0 offMax=0x3294
[ 5.922677] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.922680] vboxdrv: Successfully loaded version 4.0.8_OSE (interface 0x00180000).
[ 5.935088] iwl3945 0000:05:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 5.935092] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 5.935238] iwl3945 0000:05:00.0: irq 46 for MSI/MSI-X
[ 5.935471] Registered led device: phy0-led
[ 6.076734] usb 3-2: new full speed USB device number 3 using uhci_hcd
[ 6.260350] input: HDA Intel Line In at Sep Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.365648] Bluetooth: Core ver 2.16
[ 6.365675] NET: Registered protocol family 31
[ 6.365678] Bluetooth: HCI device and connection manager initialized
[ 6.365681] Bluetooth: HCI socket layer initialized
[ 6.365682] Bluetooth: L2CAP socket layer initialized
[ 6.367059] Bluetooth: SCO socket layer initialized
[ 6.397150] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 6.423864] nvidia: module license 'NVIDIA' taints kernel.
[ 6.423869] Disabling lock debugging due to kernel taint
[ 6.470309] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.470788] usbcore: registered new interface driver btusb
[ 6.490429] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xe0000-0xfffff
[ 6.490499] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 6.490563] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 6.589542] cfg80211: World regulatory domain updated:
[ 6.589546] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.589549] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.589552] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.589555] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.589558] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.589561] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.589575] cfg80211: Calling CRDA for country: US
[ 6.592441] cfg80211: Regulatory domain changed to country: US
[ 6.592444] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.592447] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 6.592450] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 6.592453] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.592456] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.592459] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.592461] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 7.230839] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 7.230845] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 7.230855] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.230864] nvidia 0000:01:00.0: setting latency timer to 64
[ 7.230869] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.231025] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 275.09.07 Wed Jun 8 14:16:46 PDT 2011
[ 7.672048] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 8.024321] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 8.235206] Adding 4000180k swap on /dev/sda2. Priority:-1 extents:1 across:4000180k
[ 10.230429] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 10.283546] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 11.855962] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 11.855968] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 35.639276] NET: Registered protocol family 10
[ 46.030030] eth0: no IPv6 routers present
[ 542.872512] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
[ 542.941963] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Those last two lines are after running `sudo ifconfig wlan0 up`. Running the program, `sudo iwlist wlan0 scan`, comes up with an appropriate list of access points. Yet when I run `sudo netcfg -u profile`, I get a "FAIL" message and "wlan0: link is not ready" shows up again in dmesg.
Output of lsmod | grep iwl
iwl3945 74149 0
iwl_legacy 52750 1 iwl3945
mac80211 211822 2 iwl3945,iwl_legacy
cfg80211 146401 3 iwl3945,iwl_legacy,mac80211
Output of lspci for my networking cards
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
My ethernet controller (wired) works fine.

EDIT: SOLVED
Solution: I feel sort of silly. I had mistaken my wifi switch for some sort of card eject/lock switch. Oh well, live and learn I suppose....
Hello I am having a similar problem. I tried to manually bring up my wireless device with the "ifconfig wlan0 up" but I get the following error:
SIOCSIFFLAGS: Operation not possible due to RF-kill
After some research I found a suggestion to install rfkill and ensure the following line was uncommented in /etc/conf.d/rfkill
RFKILL_UNBLOCK="all"
Then add rfkill to my /etc/rc.d/conf under daemons and restart. Despite this I still get the same error when I try to run the ifconfig command.
Here is my demsg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f692400 (usable)
[ 0.000000] BIOS-e820: 000000003f692400 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Dell Inc. Inspiron 1420 /0DT492, BIOS A01 07/10/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f692 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 03F700000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 3f468000 - 3f682000
[ 0.000000] Allocated new RAMDISK: 375e4000 - 377fdc50
[ 0.000000] Move RAMDISK from 000000003f468000 - 000000003f681c4f to 375e4000 - 377fdc4f
[ 0.000000] ACPI: RSDP 000fbbf0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 3f693e00 0005C (v01 DELL M08 27D7070A ASL 00000061)
[ 0.000000] ACPI: FACP 3f693c9c 000F4 (v04 DELL M08 27D7070A ASL 00000061)
[ 0.000000] ACPI: DSDT 3f694400 05633 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 3f6a2c00 00040
[ 0.000000] ACPI: HPET 3f693f00 00038 (v01 DELL M08 00000001 ASL 00000061)
[ 0.000000] ACPI: APIC 3f694000 00068 (v01 DELL M08 27D7070A ASL 00000047)
[ 0.000000] ACPI: MCFG 3f693fc0 0003E (v16 DELL M08 27D7070A ASL 00000061)
[ 0.000000] ACPI: SLIC 3f69409c 00024 (v01 DELL M08 27D7070A ASL 00000061)
[ 0.000000] ACPI: BOOT 3f693bc0 00028 (v01 DELL M08 27D7070A ASL 00000061)
[ 0.000000] ACPI: SSDT 3f6927b1 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f692
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f692
[ 0.000000] On node 0 totalpages: 259617
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f6df3200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32150 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b8000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6800000 s27648 r0 d21504 u2097152
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257587
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/5872116e-5d3c-4b91-8061-d3f4e14e0ada ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4155424 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f692)
[ 0.000000] Memory: 1016960k/1038920k available (3376k kernel code, 21508k reserved, 1390k data, 512k init, 129616k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f600c000 soft=f600e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1496.306 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.30 BogoMIPS (lpj=4987686)
[ 0.003469] pid_max: default: 32768 minimum: 301
[ 0.003587] Security Framework initialized
[ 0.003655] AppArmor: AppArmor disabled by boot time parameter
[ 0.003749] Mount-cache hash table entries: 512
[ 0.004058] Initializing cgroup subsys ns
[ 0.004125] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004209] Initializing cgroup subsys cpuacct
[ 0.004289] Initializing cgroup subsys memory
[ 0.004366] Initializing cgroup subsys devices
[ 0.004432] Initializing cgroup subsys freezer
[ 0.004498] Initializing cgroup subsys net_cls
[ 0.004564] Initializing cgroup subsys blkio
[ 0.006717] CPU: Physical Processor ID: 0
[ 0.006782] CPU: Processor Core ID: 0
[ 0.006847] mce: CPU supports 6 MCE banks
[ 0.006918] CPU0: Thermal monitoring enabled (TM2)
[ 0.006986] using mwait in idle threads.
[ 0.008485] ACPI: Core revision 20110316
[ 0.013347] ftrace: allocating 15225 entries in 30 pages
[ 0.016721] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.017179] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050261] CPU0: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz stepping 0d
[ 0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.053330] PEBS disabled due to CPU errata.
[ 0.053330] ... version: 2
[ 0.053330] ... bit width: 40
[ 0.053330] ... generic registers: 2
[ 0.053330] ... value mask: 000000ffffffffff
[ 0.053330] ... max period: 000000007fffffff
[ 0.053330] ... fixed-purpose events: 3
[ 0.053330] ... event mask: 0000000700000003
[ 0.070120] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.096678] CPU 1 irqstacks, hard=f60c8000 soft=f60ca000
[ 0.096681] Booting Node 0, Processors #1 Ok.
[ 0.096793] smpboot cpu 1: start_ip = 9b000
[ 0.006666] Initializing CPU#1
[ 0.193356] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.199993] Brought up 2 CPUs
[ 0.200057] Total of 2 processors activated (5987.49 BogoMIPS).
[ 0.201199] devtmpfs: initialized
[ 0.201466] print_constraints: dummy:
[ 0.201604] NET: Registered protocol family 16
[ 0.203475] ACPI: bus type pci registered
[ 0.203665] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.203749] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.203817] PCI: Using MMCONFIG for extended config space
[ 0.203882] PCI: Using configuration type 1 for base access
[ 0.203954] dmi type 0xB1 record - unknown flag
[ 0.204679] bio: create slab <bio-0> at 0
[ 0.204902] ACPI: EC: Look up EC in DSDT
[ 0.226159] ACPI: SSDT 3f6931b8 001C0 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.226708] ACPI: Dynamic OEM Table Load:
[ 0.226865] ACPI: SSDT (null) 001C0 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.227216] ACPI: SSDT 3f692c7d 004B6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.227731] ACPI: Dynamic OEM Table Load:
[ 0.227887] ACPI: SSDT (null) 004B6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.228404] ACPI: SSDT 3f693378 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.228935] ACPI: Dynamic OEM Table Load:
[ 0.229092] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.229399] ACPI: SSDT 3f693133 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.229916] ACPI: Dynamic OEM Table Load:
[ 0.230046] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.230473] ACPI: Interpreter enabled
[ 0.230541] ACPI: (supports S0 S3 S4 S5)
[ 0.230809] ACPI: Using IOAPIC for interrupt routing
[ 0.286877] ACPI: No dock devices found.
[ 0.286943] HEST: Table not found.
[ 0.287009] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.300195] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.325114] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.325119] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.325123] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.325127] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.325131] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xf7ffffff] (ignored)
[ 0.325135] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] (ignored)
[ 0.325139] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored)
[ 0.325143] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored)
[ 0.325147] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored)
[ 0.325151] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored)
[ 0.325154] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored)
[ 0.325158] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] (ignored)
[ 0.325173] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.325234] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
[ 0.325254] pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit]
[ 0.325267] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.325276] pci 0000:00:02.0: reg 20: [io 0xeff8-0xefff]
[ 0.325321] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
[ 0.325338] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfebfffff 64bit]
[ 0.325447] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.325514] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f]
[ 0.325562] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.325630] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f]
[ 0.325695] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.325725] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
[ 0.325832] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.325840] pci 0000:00:1a.7: PME# disabled
[ 0.325875] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.325903] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.326002] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.326009] pci 0000:00:1b.0: PME# disabled
[ 0.326044] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.326147] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.326154] pci 0000:00:1c.0: PME# disabled
[ 0.326192] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.326295] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.326302] pci 0000:00:1c.1: PME# disabled
[ 0.326341] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[ 0.326445] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.326451] pci 0000:00:1c.3: PME# disabled
[ 0.326491] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
[ 0.326595] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.326601] pci 0000:00:1c.5: PME# disabled
[ 0.326637] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.326711] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f]
[ 0.326759] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.326827] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f]
[ 0.326875] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.326942] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f]
[ 0.327008] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.327038] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
[ 0.327145] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.327152] pci 0000:00:1d.7: PME# disabled
[ 0.327181] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.327284] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.327414] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.327501] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[ 0.327573] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[ 0.327658] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[ 0.327786] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.327806] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
[ 0.327822] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
[ 0.327837] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
[ 0.327852] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
[ 0.327867] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf]
[ 0.327928] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.327961] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7]
[ 0.327976] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb]
[ 0.327991] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7]
[ 0.328006] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb]
[ 0.328021] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff]
[ 0.328036] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb800-0xfe9fbfff]
[ 0.328094] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.328100] pci 0000:00:1f.2: PME# disabled
[ 0.328127] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.328148] pci 0000:00:1f.3: reg 10: [mem 0xfe9fb700-0xfe9fb7ff]
[ 0.328198] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df]
[ 0.328318] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 0.328388] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.328395] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.328406] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.328583] pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280
[ 0.328643] pci 0000:0c:00.0: reg 10: [mem 0xfe8ff000-0xfe8fffff]
[ 0.329003] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.329017] pci 0000:0c:00.0: PME# disabled
[ 0.329092] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.329256] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 0.329325] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.329332] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.329343] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.329416] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 0.329486] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.329493] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe7fffff]
[ 0.329503] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.329654] pci 0000:09:00.0: [14e4:1713] type 0 class 0x000200
[ 0.329729] pci 0000:09:00.0: reg 10: [mem 0xfe5f0000-0xfe5fffff 64bit]
[ 0.330065] pci 0000:09:00.0: PME# supported from D3hot D3cold
[ 0.330079] pci 0000:09:00.0: PME# disabled
[ 0.330229] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[ 0.330299] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
[ 0.330306] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.330316] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.330374] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00
[ 0.330403] pci 0000:03:01.0: reg 10: [mem 0xfe4ff800-0xfe4fffff]
[ 0.330507] pci 0000:03:01.0: supports D1 D2
[ 0.330510] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330517] pci 0000:03:01.0: PME# disabled
[ 0.330543] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805
[ 0.330571] pci 0000:03:01.1: reg 10: [mem 0xfe4ff500-0xfe4ff5ff]
[ 0.330675] pci 0000:03:01.1: supports D1 D2
[ 0.330678] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330685] pci 0000:03:01.1: PME# disabled
[ 0.330712] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880
[ 0.330739] pci 0000:03:01.2: reg 10: [mem 0xfe4ff600-0xfe4ff6ff]
[ 0.330842] pci 0000:03:01.2: supports D1 D2
[ 0.330845] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330852] pci 0000:03:01.2: PME# disabled
[ 0.330878] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880
[ 0.330905] pci 0000:03:01.3: reg 10: [mem 0xfe4ff700-0xfe4ff7ff]
[ 0.331009] pci 0000:03:01.3: supports D1 D2
[ 0.331012] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.331019] pci 0000:03:01.3: PME# disabled
[ 0.331101] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.331173] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.331180] pci 0000:00:1e.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.331190] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.331194] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.331198] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.331238] pci_bus 0000:00: on NUMA node 0
[ 0.331244] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.331643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.331798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.331874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.331953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.332028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.332100] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.332167] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.346826] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.347217] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.347603] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[ 0.348041] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 0.348520] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.349285] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.350058] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.350808] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.351693] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.351794] vgaarb: loaded
[ 0.351988] PCI: Using ACPI for IRQ routing
[ 0.352053] PCI: pci_cache_line_size set to 64 bytes
[ 0.352214] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.352218] reserve RAM buffer: 000000003f692400 - 000000003fffffff
[ 0.352373] NetLabel: Initializing
[ 0.352437] NetLabel: domain hash size = 128
[ 0.352501] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.352581] NetLabel: unlabeled traffic allowed by default
[ 0.352662] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.352736] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.352984] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.363339] Switching to clocksource hpet
[ 0.366435] Switched to NOHz mode on CPU #0
[ 0.366544] Switched to NOHz mode on CPU #1
[ 0.372461] pnp: PnP ACPI init
[ 0.372551] ACPI: bus type pnp registered
[ 0.384786] pnp 00:00: [bus 00-ff]
[ 0.384791] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.384794] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.384798] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.384802] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.384805] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.384809] pnp 00:00: [mem 0x40000000-0xf7ffffff window]
[ 0.384812] pnp 00:00: [mem 0xfc000000-0xfebfffff window]
[ 0.384815] pnp 00:00: [mem 0xfec10000-0xfecfffff window]
[ 0.384819] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
[ 0.384822] pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
[ 0.384826] pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
[ 0.384829] pnp 00:00: [mem 0xfee10000-0xff9fffff window]
[ 0.384832] pnp 00:00: [mem 0xffb00000-0xffefffff window]
[ 0.384948] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.384985] pnp 00:01: [irq 12]
[ 0.385025] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.385048] pnp 00:02: [io 0x0060]
[ 0.385051] pnp 00:02: [io 0x0064]
[ 0.385054] pnp 00:02: [io 0x0062]
[ 0.385057] pnp 00:02: [io 0x0066]
[ 0.385068] pnp 00:02: [irq 1]
[ 0.385106] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.385128] pnp 00:03: [io 0x0070-0x0071]
[ 0.385136] pnp 00:03: [irq 8]
[ 0.385139] pnp 00:03: [io 0x0072-0x0077]
[ 0.385180] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.385205] pnp 00:04: [io 0x0061]
[ 0.385208] pnp 00:04: [io 0x0063]
[ 0.385211] pnp 00:04: [io 0x0065]
[ 0.385213] pnp 00:04: [io 0x0067]
[ 0.385252] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.385273] pnp 00:05: [io 0x0c80-0x0cff]
[ 0.385357] system 00:05: [io 0x0c80-0x0cff] could not be reserved
[ 0.385428] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.385454] pnp 00:06: [dma 4]
[ 0.385457] pnp 00:06: [io 0x0000-0x000f]
[ 0.385461] pnp 00:06: [io 0x0080-0x0085]
[ 0.385463] pnp 00:06: [io 0x0087-0x008f]
[ 0.385466] pnp 00:06: [io 0x00c0-0x00df]
[ 0.385469] pnp 00:06: [io 0x0010-0x001f]
[ 0.385472] pnp 00:06: [io 0x0090-0x0091]
[ 0.385475] pnp 00:06: [io 0x0093-0x009f]
[ 0.385516] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.385537] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.385545] pnp 00:07: [irq 13]
[ 0.385589] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.385643] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.385718] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.385789] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.385983] pnp 00:09: [io 0x0900-0x097f]
[ 0.385987] pnp 00:09: [io 0x0092]
[ 0.385990] pnp 00:09: [io 0x00b2-0x00b3]
[ 0.385993] pnp 00:09: [io 0x0020-0x0021]
[ 0.385996] pnp 00:09: [io 0x00a0-0x00a1]
[ 0.385999] pnp 00:09: [irq 0 disabled]
[ 0.386002] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.386005] pnp 00:09: [io 0x1000-0x1005]
[ 0.386008] pnp 00:09: [io 0x1008-0x100f]
[ 0.386036] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.386121] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.386286] system 00:09: [io 0x0900-0x097f] has been reserved
[ 0.386354] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.386423] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.386446] pnp 00:0a: [io 0xf400-0xf4fe]
[ 0.386449] pnp 00:0a: [io 0x0086]
[ 0.386452] pnp 00:0a: [io 0x1006-0x1007]
[ 0.386455] pnp 00:0a: [io 0x100a-0x1059]
[ 0.386458] pnp 00:0a: [io 0x1060-0x107f]
[ 0.386461] pnp 00:0a: [io 0x1080-0x10bf]
[ 0.386464] pnp 00:0a: [io 0x10c0-0x10df]
[ 0.386467] pnp 00:0a: [io 0x1010-0x102f]
[ 0.386470] pnp 00:0a: [io 0x0809]
[ 0.386496] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.386581] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.386666] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.386765] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.386932] system 00:0a: [io 0xf400-0xf4fe] has been reserved
[ 0.387000] system 00:0a: [io 0x1080-0x10bf] has been reserved
[ 0.387068] system 00:0a: [io 0x10c0-0x10df] has been reserved
[ 0.387136] system 00:0a: [io 0x0809] has been reserved
[ 0.387203] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.400920] pnp 00:0b: [mem 0x00000000-0x0009efff]
[ 0.400924] pnp 00:0b: [mem 0x0009f000-0x0009ffff]
[ 0.400927] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.400931] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.400934] pnp 00:0b: [mem 0x00100000-0x3f6923ff]
[ 0.400937] pnp 00:0b: [mem 0x3f692400-0x3f6fffff]
[ 0.400940] pnp 00:0b: [mem 0x3f700000-0x3f7fffff]
[ 0.400943] pnp 00:0b: [mem 0x3f700000-0x3fefffff]
[ 0.400946] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.400949] pnp 00:0b: [mem 0xffa00000-0xffafffff]
[ 0.400952] pnp 00:0b: [mem 0xfec00000-0xfec0ffff]
[ 0.400955] pnp 00:0b: [mem 0xfee00000-0xfee0ffff]
[ 0.400958] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
[ 0.400961] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff]
[ 0.400964] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff]
[ 0.400967] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff]
[ 0.400970] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff]
[ 0.400973] pnp 00:0b: [mem 0xfed18000-0xfed1bfff]
[ 0.400976] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 0.401112] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved
[ 0.401183] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved
[ 0.401252] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.401321] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.401391] system 00:0b: [mem 0x00100000-0x3f6923ff] could not be reserved
[ 0.401460] system 00:0b: [mem 0x3f692400-0x3f6fffff] has been reserved
[ 0.401529] system 00:0b: [mem 0x3f700000-0x3f7fffff] has been reserved
[ 0.401598] system 00:0b: [mem 0x3f700000-0x3fefffff] could not be reserved
[ 0.401667] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.401736] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved
[ 0.401805] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.401874] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.401942] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.402011] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved
[ 0.402080] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved
[ 0.402148] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved
[ 0.402219] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved
[ 0.402289] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved
[ 0.402358] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.402429] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.402514] pnp: PnP ACPI: found 12 devices
[ 0.402579] ACPI: ACPI bus type pnp unregistered
[ 0.439832] pci 0000:00:1c.5: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.439917] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.439986] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.440081] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.440151] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40400000-0x405fffff]
[ 0.440222] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
[ 0.440306] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.440376] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 0.440443] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.440517] pci 0000:00:1c.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.440589] pci 0000:00:1c.0: bridge window [mem 0x40600000-0x407fffff 64bit pref]
[ 0.440677] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 0.440744] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.440817] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.440889] pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.440976] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 0.441043] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.441115] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe7fffff]
[ 0.441187] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.441274] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[ 0.441342] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.441413] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.441485] pci 0000:00:1c.5: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.441572] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.441638] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.441710] pci 0000:00:1e.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.441781] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.441870] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.441942] pci 0000:00:1c.0: setting latency timer to 64
[ 0.441955] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.442026] pci 0000:00:1c.1: setting latency timer to 64
[ 0.442038] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.442109] pci 0000:00:1c.3: setting latency timer to 64
[ 0.442119] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.442190] pci 0000:00:1c.5: setting latency timer to 64
[ 0.442201] pci 0000:00:1e.0: setting latency timer to 64
[ 0.442207] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.442211] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.442215] pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff]
[ 0.442218] pci_bus 0000:0b: resource 1 [mem 0x40400000-0x405fffff]
[ 0.442222] pci_bus 0000:0b: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
[ 0.442226] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff]
[ 0.442230] pci_bus 0000:0c: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.442233] pci_bus 0000:0c: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.442237] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff]
[ 0.442241] pci_bus 0000:0d: resource 1 [mem 0xfe600000-0xfe7fffff]
[ 0.442245] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.442248] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.442252] pci_bus 0000:09: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.442256] pci_bus 0000:09: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.442260] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.442263] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.442267] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[ 0.442328] NET: Registered protocol family 2
[ 0.442487] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.442867] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.443500] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.443819] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.443888] TCP reno registered
[ 0.443951] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.444025] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.444241] NET: Registered protocol family 1
[ 0.444324] pci 0000:00:02.0: Boot video device
[ 0.444542] PCI: CLS 64 bytes, default 64
[ 0.444604] Unpacking initramfs...
[ 0.497373] Freeing initrd memory: 2152k freed
[ 0.498538] Simple Boot Flag at 0x79 set to 0x1
[ 0.498947] apm: BIOS not found.
[ 0.499191] audit: initializing netlink socket (disabled)
[ 0.499270] type=2000 audit(1311732031.496:1): initialized
[ 0.499711] highmem bounce pool size: 64 pages
[ 0.499780] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.502730] VFS: Disk quotas dquot_6.5.2
[ 0.502908] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.503131] msgmni has been set to 1737
[ 0.503467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.503585] io scheduler noop registered
[ 0.503650] io scheduler deadline registered
[ 0.503729] io scheduler cfq registered (default)
[ 0.503977] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.504049] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.504155] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.504219] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.504319] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.504383] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.504482] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.504545] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.504797] intel_idle: MWAIT substates: 0x22220
[ 0.504800] intel_idle: does not run on family 6 model 15
[ 0.504808] ERST: Table is not found!
[ 0.504887] isapnp: Scanning for PnP cards...
[ 0.861991] isapnp: No Plug & Play device found
[ 0.862125] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.064028] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.066832] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.066941] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.067133] mousedev: PS/2 mouse device common for all mice
[ 1.067295] rtc_cmos 00:03: RTC can wake from S4
[ 1.070090] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.090146] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.090247] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.090347] cpuidle: using governor ladder
[ 1.090411] cpuidle: using governor menu
[ 1.090805] TCP cubic registered
[ 1.090869] NET: Registered protocol family 17
[ 1.090940] Registering the dns_resolver key type
[ 1.091021] Using IPI No-Shortcut mode
[ 1.091192] PM: Hibernation image not present or could not be loaded.
[ 1.091199] registered taskstats version 1
[ 1.091987] rtc_cmos 00:03: setting system clock to 2011-07-27 02:00:33 UTC (1311732033)
[ 1.092123] Initializing network drop monitor service
[ 1.092277] Freeing unused kernel memory: 512k freed
[ 1.092674] Write protecting the kernel text: 3380k
[ 1.092770] Write protecting the kernel read-only data: 1028k
[ 1.107041] udevd[48]: starting version 171
[ 1.114908] Linux agpgart interface v0.103
[ 1.121178] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 1.121359] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.122127] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.122374] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.134889] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.135457] ACPI: Lid Switch [LID]
[ 1.135611] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.135702] ACPI: Power Button [PBTN]
[ 1.135836] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.135920] ACPI: Sleep Button [SBTN]
[ 1.165275] [drm] Initialized drm 1.1.0 20060810
[ 1.206851] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.206929] i915 0000:00:02.0: setting latency timer to 64
[ 1.232385] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.232394] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.232466] [drm] Driver supports precise vblank timestamp query.
[ 1.290108] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.290525] [drm] initialized overlay support
[ 1.500042] Refined TSC clocksource calibration: 1496.249 MHz.
[ 1.500113] Switching to clocksource tsc
[ 1.652818] fbcon: inteldrmfb (fb0) is primary device
[ 1.701242] Console: switching to colour frame buffer device 180x56
[ 1.708681] fb0: inteldrmfb frame buffer device
[ 1.708727] drm: registered panic notifier
[ 1.722258] acpi device:35: registered as cooling_device0
[ 1.722670] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input4
[ 1.722770] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 1.722857] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 1.723157] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.857654] SCSI subsystem initialized
[ 1.888922] libata version 3.00 loaded.
[ 1.893097] ata_piix 0000:00:1f.1: version 2.13
[ 1.893119] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.893250] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.893737] scsi0 : ata_piix
[ 1.893897] scsi1 : ata_piix
[ 1.894413] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[ 1.894485] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[ 1.894822] ata2: port disabled. ignoring.
[ 2.053718] ata1.00: ATAPI: CD-RW/DVD-ROM DW224EV, D.CF, max UDMA/33
[ 2.066932] ata1.00: configured for UDMA/33
[ 2.069600] scsi 0:0:0:0: CD-ROM TEAC CDRWDVD DW224EV D.CF PQ: 0 ANSI: 5
[ 2.078842] ahci 0000:00:1f.2: version 3.0
[ 2.078863] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.079123] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 2.079207] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 2.079291] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[ 2.079375] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.084142] scsi2 : ahci
[ 2.084346] scsi3 : ahci
[ 2.084543] scsi4 : ahci
[ 2.084859] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 45
[ 2.084935] ata4: DUMMY
[ 2.084964] ata5: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 45
[ 2.087493] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.087564] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.087898] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.403362] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.403454] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.406706] ata3.00: ATA-8: FUJITSU MHW2080BH, 0085001C, max UDMA/100
[ 2.409686] ata3.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[ 2.413635] ata3.00: configured for UDMA/100
[ 2.416701] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHW2080B 0085 PQ: 0 ANSI: 5
[ 2.431871] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.435016] sd 2:0:0:0: [sda] Write Protect is off
[ 2.438062] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.438092] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.481026] sda: sda1 sda2 sda3 sda4
[ 2.484500] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.080357] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.235421] udevd[242]: starting version 171
[ 6.112926] wmi: Mapper loaded
[ 6.146108] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.146113] ACPI: Thermal Zone [THM] (51 C)
[ 6.146168] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.146178] ACPI: Battery Slot [BAT0] (battery present)
[ 6.350955] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.351124] ACPI: AC Adapter [AC] (off-line)
[ 6.396340] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.644301] r592 0000:03:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 6.644566] r592: driver successfully loaded
[ 6.699202] ACPI: acpi_idle registered with cpuidle
[ 6.703690] Monitor-Mwait will be used to enter C-1 state
[ 6.704291] Monitor-Mwait will be used to enter C-2 state
[ 6.707773] Monitor-Mwait will be used to enter C-3 state
[ 6.707782] Marking TSC unstable due to TSC halts in idle
[ 6.708021] Switching to clocksource hpet
[ 6.748943] tg3.c:v3.117 (January 25, 2011)
[ 6.748973] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.748993] tg3 0000:09:00.0: setting latency timer to 64
[ 6.777884] input: Dell WMI hotkeys as /devices/virtual/input/input5
[ 6.781361] iTCO_vendor_support: vendor-support=0
[ 6.792450] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1a:a0:ff:18:0a
[ 6.792457] tg3 0000:09:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 6.792462] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[ 6.792467] tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 6.798284] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.798408] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 6.798487] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.801214] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.806086] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.860147] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 6.864325] sdhci: Secure Digital Host Controller Interface driver
[ 6.864328] sdhci: Copyright(c) Pierre Ossman
[ 6.905947] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
[ 6.905970] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 6.907018] _regulator_get: 0000:03:01.1 supply vmmc not found, using dummy regulator
[ 6.908074] Registered led device: mmc0::
[ 6.909131] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[ 7.025015] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 7.025072] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.028152] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 7.151001] usbcore: registered new interface driver usbfs
[ 7.151243] usbcore: registered new interface driver hub
[ 7.152609] usbcore: registered new device driver usb
[ 7.330432] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
[ 7.346790] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 7.360146] firewire_core: created device fw0: GUID 374fc00003055581, S400
[ 7.371707] cfg80211: Calling CRDA to update world regulatory domain
[ 7.580439] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.580508] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 7.580544] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 7.580549] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 7.580597] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 7.593422] ehci_hcd 0000:00:1a.7: debug port 1
[ 7.597307] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 7.597332] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 7.610090] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 7.610350] hub 1-0:1.0: USB hub found
[ 7.610357] hub 1-0:1.0: 4 ports detected
[ 7.610503] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.610534] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.610540] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.610553] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 7.620125] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.624008] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 7.624033] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 7.636706] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.636983] hub 2-0:1.0: USB hub found
[ 7.636990] hub 2-0:1.0: 6 ports detected
[ 7.652500] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.652595] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.653363] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 7.653370] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 7.653388] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 7.670218] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 7.670496] hub 3-0:1.0: USB hub found
[ 7.670503] hub 3-0:1.0: 2 ports detected
[ 7.670641] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 7.670654] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 7.670659] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 7.670672] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 7.676788] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 7.677040] hub 4-0:1.0: USB hub found
[ 7.677047] hub 4-0:1.0: 2 ports detected
[ 7.677185] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.677199] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.677204] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.677216] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 7.693417] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 7.693690] hub 5-0:1.0: USB hub found
[ 7.693697] hub 5-0:1.0: 2 ports detected
[ 7.693825] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 7.693838] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.693843] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.693855] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 7.706742] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 7.707004] hub 6-0:1.0: USB hub found
[ 7.707011] hub 6-0:1.0: 2 ports detected
[ 7.707138] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 7.707151] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.707156] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.707168] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 7.720067] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 7.720328] hub 7-0:1.0: USB hub found
[ 7.720335] hub 7-0:1.0: 2 ports detected
[ 7.725543] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 7.731070] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 7.731112] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.791352] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 7.791357] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 7.791444] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.791461] iwl3945 0000:0c:00.0: setting latency timer to 64
[ 7.884213] iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 7.884219] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 7.884373] iwl3945 0000:0c:00.0: irq 47 for MSI/MSI-X
[ 7.884664] Registered led device: phy0-led
[ 7.892327] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 8.036178] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 8.073586] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.073775] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.073882] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.476644] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 9.636841] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 9.685426] Adding 4096568k swap on /dev/sda2. Priority:-1 extents:1 across:4096568k
[ 11.639232] tg3 0000:09:00.0: irq 48 for MSI/MSI-X
[ 13.282530] tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 13.282535] tg3 0000:09:00.0: eth0: Flow control is off for TX and off for RX
[ 27.318984] NET: Registered protocol family 10
[ 38.070217] eth0: no IPv6 routers present
[ 1205.294621] chromium-sandbo (1490): /proc/1488/oom_adj is deprecated, please use /proc/1488/oom_score_adj instead.
Here is my rfkill list output:
0: dell-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: yes
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
my lsmod and lspci output is the same.
I am on an dell insprion 1420. I have also tried to disable the dell-laptop module to no avail
Last edited by n0dl (2011-07-27 14:45:25)

TS3048 wireless keyboard does not work

I just used my Apple wireless keyboard a few days ago. Today I cannot get it working. Caps lock does not even light up, so I canged batteries. My MacMini cannot detect bluetooth of my keyboard, it seems. Any suggestions?

Hello:
Try resetting the SMC.
Barry

Wireless keyboard does not work after waking up from idle

Similar Messages

Maybe you are looking for