Wireless keyboard is not recognised on startup even though batteries are not flat?

I have two imacs and yesterday one of the keyboards would not connect to the imac when it started in the morning so I assumed it was the batteries and changed them but the same thing happened to my other imac this morning and so I used an old wired keyboard to log in and then the wireless keyboard started to work and told me it 100% battery.
Does anyone have an idea why this is happening and what I can do to stop it?
Cheers
David

hi,
remove the keybords on both mac and reinstal (pairing) the keybord on each machine.take care one keyboard one machine to avoid confusion.
regards

Similar Messages

Safari tries to connect to a hotel wifi even though we are not at the hotel the wifi is not listed in settings

safari tries to connect to a hotel wifi even though we are not at the hotel. the wifi is not listed in settings

Yes... tap Settings / Wi Fi

All my incoming calls are coming up as unknown, even though they are not blocked?

All my incoming calls are coming up as unknown, even though they are not blocked? Any help much appreciated!

We didnt Still happens to some numbers!

HT204150 I have just set up icloud and all my contacts are duplicated from Address Book! My new iPhone is also showing duplicate contacts even though they are not duplicated in my address book on my computer. Please can you help

I have just set up icloud and all my contacts are duplicated from Address Book! My new iPhone is also showing duplicate contacts even though they are not duplicated in my address book on my computer. Please can you help?

Also, what are the source of your contacts? are they created on the phone, or you synced from yahoo/hotmail etc.
If thats the case, the circular arrow wont be visible but instead show "groups"
Contacts from different accounts are not synced to iCloud.

Wireless keyboard function keys don't work even though updated

Hi,
like i read in different threads, many others had this problem too.
The function keys of my bluetooth keyboard (aluminium 2009) don't work even though i did firmware update for mighty mouse AND the keyboard firmware update. I also unset the option 'use function keys with fn......' option in system preferences. I also tried disconnecting and connecting the device. In system profiler the entry says it is (still) firmware version 80.
What can i do?
I'm thankful for any hint.
Best, Jörg

wrote this in another thread, but it is relevant here, too.
Wanting to buy a keyboard and reading this thread (and others), I went to a local Best Buy. They had quite a few of the wireless keyboards out. They had MC184LL(A) models and (B) models.
ALL of the (A) models worked perfectly with the iPad (typing, brightness, volume, ipod functions, etc).
NONE of the (B) models worked other than basic typing.
They had a stack of maybe 50 new wireless keyboards on the shelf. All but two of them were (B) models.
I bought one of the two (A) models. It is working perfectly on my iPad.
Rob

Itunes not recognising my library even though I transferred my library from another mac

Hello. Transferring over to an MBA from a MBP. I followed the instructions and copied the itunes folder from my MBP (itunes 11.1.1) to an external hard drive after consolidating it.
On my MBA I removed the itunes folder it came with and replaced it with the folder from my external hard drive (itunes 11.0.3). However, iTunes is not recognising any of the music! I really want to import all my ratings and playlists so am keen for this to work.
I've done it before and it worked just fine. What am I doing wrong?
Thanks in advance.

Oh, yeah, it is confusing. The Purchased option on the Sidebar only shows purchases actually made on the computer you are using at the time you click on the Purchased option. The Purchased option under Quick Links shows you all purchases made under the Apple ID that is signed on.
I wish they would change the name of one or the other so they would be distinctive from one another - even Purchased vs. Purchases would be better than using the exact same word!
Cheers,
GB

Office 365 ProPlus App-V 5.0 Package installs Lync, Outlook, Infopath and Onenote even though they are not selected for publishing

I have created an App-V 5.0 Package for Office 365 ProPlus using the documentation provided here:
http://technet.microsoft.com/en-us/library/jj219422.aspx
I am able to load the App-V Package into my SCCM 2012 SP1 environment and deploy the package to a test machine
Within SCCM, I have configured the deployment type to only select a couple of applications. Notice that Lync, Outlook, Infopath and Onenote are not selected.
http://i.imgur.com/1eMxUlY.jpg
For my deployment type, I only selected Word, Excel and Powerpoint. Looking at my test machine, those 3 applications now show up in my start screen.
http://i.imgur.com/amZmxAT.jpg
I don't see any of the other Office applications be default on my start screen, so I would think all looks good. If I type another Office application, lets say access at the start screen I get, "No apps match your search."
http://i.imgur.com/fxbWEvb.jpg
But if I type Lync, Outlook, Infopath or Onenote, it shows me that those applications are available, and I can launch them as an App-V application just as I could Excel, Word or Powerpoint, the applications that I wanted to have available.
This is not what I was expecting when I went through the trouble to create an App-V package. It looks like almost all of the apps become available on my client machine, all App-V is doing is making the application button in the start screen a little
harder to find.
What is interesting is that for the applications I did want published, I can search for them by just entering a few letters of the application name, and they show up with the 2013 version label, see below for an example search for Word.
http://i.imgur.com/0LeS05z.jpg
For the applications that I did not publish but still show up on my client, I have to type in the full name of the application for the launch button to come up. For example, I can't type lyn and expect to see Lync, but if i type lync I will get an
option to launch the application. The same goes for Outlook, Infopath and Onenote, and when you do type in the full namke of the app, it doesn't show the version number like Word does as Word 2013, it just shows Lync, or Outlook, or Infopath, or
Onenote.
http://i.imgur.com/QV1afuc.jpg
vs
http://i.imgur.com/PxgSmUc.jpg
Can anyone from Microsoft confirm that this is expected behavior. If this is to be expected this is pretty disappointing, because a main point of the App-V package is it is the only way to limit which applications are deployed via Office 365 ProPlus
but from what I can tell, it really isn't limiting anything beyond the start screen for most cases.

So it looks like the config xml files are the best option
http://blogs.technet.com/b/office_resource_kit/archive/2013/12/02/announcing-app-v-5-0-sp2-support-for-office-2013-volume-licensing-editions.aspx
You can now use the Deployment Configuration file to configure the Office installation. One question I often get is, “How do I disable msaccess.exe or infopath.exe from an Office install if I am not using the MSI package?” This can be done by modifying the
Deployment Configuration file in App-V with entries like the following:
<Application Id="[(AppVPackageRoot}]\office15\MSACCESS.EXE" Enabled="false">
<VisualElements>
<Name>Access 2013</Name>
<Icon />
<Description />
</VisualElements>
</Application>
That will prevent App-V from publishing msaccess.exe on the system and/or you can remove any undesired application shortcuts from publishing on the targeted computer using the shortcuts properties by deleting or commenting them out. Once you’ve configured your
Deployment and User Configuration files, you’ll have everything you need to import the packages into your App-V environment to start testing.

I cannot rearrange layers in Muse even though they are not locked.

I have seen tutorial videos where people can rearrange the stacking order of the layers in the layers panel. Yet when I try they just won't move. They are not locked, and I have tried the master page and a normal page. Has anyone got any ideas of why others seem to be able to but I cannot.
Cheers
Ian

Ian,
I am having the exact same issue. Not sure what is going on here, but I am searching for a solution.
Jeremy

How can I stop Preview from opening at startup even though it is not listed in my Login Items?

When I log into one of my user accounts in my MacBook Pro (Mountain Lion), Preview is always open. The preview window itself is not open but the application name is active in the menu bar in the top left hand corner. The Preview item on the taskbar is also lit. Both of these indicate to me that Preview is running. However, I checked my Login Items repeatedly and Preview is not even listed. I also make sure that when logging out, the "Reopen windows when logging out" is unchecked. But Preview still always opens whenever I log into this particular user account -- it does not do it in any of my other user accounts. How can I fix this?

Thanks. I got to the bottom of it by checking Login Items. I had Flux, iTunes Helper, and Dropbox. I removed the first two from Login Items, leaving only Dropbox. However, when I rebooted and logged in, Preview was still open and Flux and iTunes Helper were back in the Login Items. To find out which application is the culprit, I looked under Flux's Preferences settings and disabled it from opening at login. I was intending to do it for every application until I find the culprit, but doing so to Flux solved the problem.

How do you keep your desktop ON all day even though you are not there working? I need to keep it on in order to use file maker pro on my MacBook Pro .

I have filemaker pro on my Imac I recently purchased another license to use on my MacBook pro.
I can share from the host my IMac and be able to use it on my laptop as long as the compueter is on. and I have all the files open.
If i am at the computer no probelm. But the last two days i have to step out of the office and my MacBook pro can not pick up the host:(
because the computer goes to sleep. How do I keep it on. So i can make sure i can access the other files.
Thank you

Open up system preference>screen saver>unlock the padlock icon to make any changes>set display and computer sleep to never>lock the padlock icon again.

HFM Security Issue - User can submit a journal by by-passing the approval step even though they are not an admin.

Hi All,
I was wondering if anyone could help me with a HFM security issue on HFM 11.1.2.3 we are facing please?
The problem is that a user can by-pass the journal approval stage and post directly after submitting if Custom4 access control=All is selected.
If any of the other access controls (None, Read, Promote) for custom 4 are selected, the first two steps of the process are possible -
input and approval of the journal are possible but final posting of the journal is not and returns an error that says:
"User does not have the access right to perform this journal task"
The options I have thought for a workaround are as follows:
1.       1. Set up a 3rd user called data poster and remove submit journal role from user 1 (data inputter)
2.       2. Put in place process control and use the various review levels (could be quite time consuming given there is no time left for development)
Have anyone experienced this before and come up with a quick way of resolving this please? It would be very much appreciated.
We have two types of users who are associated with groups in HFM and have the appropriate roles assigned to them to complete their tasks,
they are:
1. A data Inputter (who inputs base data and journals, who has access to create and submit journals)
2.   2. A data reviewer (who approves journals)
The process is as follows:
1.       1. Logon as Data inputter to submit the journals
2.       2. Logon as Data reviewer to approve the journals
3.       3. Logon as Data inputter to post the Journals
We are using the custom 4 member to identify different adjustment types. At the moment we are able to set it up in such a way whereby Steps 1 and 2 can be completed
but once it comes back to step 3, we get an error as follows:
"User does not have the access right to perform this journal task"
(This error comes about when the access control on custom 4 is set to None, Read, Promote)
Custom 4 Access Rights looks as follows:
C4_ADJ01
C4_ADJ02
C4_ADJ03
C4_ADJ04
HFMDefault
Read
Read
Read
Read
HFMLoad
All
Promote
None
Read
HFMReview
Read
All
All
All
When Custom 4=C4_ADJ01 all 3 steps can be completed but it by-passes step 2 (journal approval).
For all other Custom 4 we complete steps 1 and 2 successfully but not step 3 due to access issues.
Roles for the groups that users assigned look like the following:
Test User Name
Test User Name
Access Rights
1
Base Data input/Journal Data input
test_HFMLoad
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Enable write back in Web Grid
Load Excel Data
Generate Recurring
Post Journals
Create Unbalanced Journals
Manage Templates
Data Form Write Back from Excel
Consolidate
2
Data Reviewer
test_HFMReview
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Approve Journals
Consolidate
Reviewer 2
Generate Recurring
Manage Templates
Create Unbalanced Journals
Any help or advice would be much appreciated.
Thanks in advance,
M.

Hi All,
I was wondering if anyone could help me with a HFM security issue on HFM 11.1.2.3 we are facing please?
The problem is that a user can by-pass the journal approval stage and post directly after submitting if Custom4 access control=All is selected.
If any of the other access controls (None, Read, Promote) for custom 4 are selected, the first two steps of the process are possible -
input and approval of the journal are possible but final posting of the journal is not and returns an error that says:
"User does not have the access right to perform this journal task"
The options I have thought for a workaround are as follows:
1.       1. Set up a 3rd user called data poster and remove submit journal role from user 1 (data inputter)
2.       2. Put in place process control and use the various review levels (could be quite time consuming given there is no time left for development)
Have anyone experienced this before and come up with a quick way of resolving this please? It would be very much appreciated.
We have two types of users who are associated with groups in HFM and have the appropriate roles assigned to them to complete their tasks,
they are:
1. A data Inputter (who inputs base data and journals, who has access to create and submit journals)
2.   2. A data reviewer (who approves journals)
The process is as follows:
1.       1. Logon as Data inputter to submit the journals
2.       2. Logon as Data reviewer to approve the journals
3.       3. Logon as Data inputter to post the Journals
We are using the custom 4 member to identify different adjustment types. At the moment we are able to set it up in such a way whereby Steps 1 and 2 can be completed
but once it comes back to step 3, we get an error as follows:
"User does not have the access right to perform this journal task"
(This error comes about when the access control on custom 4 is set to None, Read, Promote)
Custom 4 Access Rights looks as follows:
C4_ADJ01
C4_ADJ02
C4_ADJ03
C4_ADJ04
HFMDefault
Read
Read
Read
Read
HFMLoad
All
Promote
None
Read
HFMReview
Read
All
All
All
When Custom 4=C4_ADJ01 all 3 steps can be completed but it by-passes step 2 (journal approval).
For all other Custom 4 we complete steps 1 and 2 successfully but not step 3 due to access issues.
Roles for the groups that users assigned look like the following:
Test User Name
Test User Name
Access Rights
1
Base Data input/Journal Data input
test_HFMLoad
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Enable write back in Web Grid
Load Excel Data
Generate Recurring
Post Journals
Create Unbalanced Journals
Manage Templates
Data Form Write Back from Excel
Consolidate
2
Data Reviewer
test_HFMReview
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Approve Journals
Consolidate
Reviewer 2
Generate Recurring
Manage Templates
Create Unbalanced Journals
Any help or advice would be much appreciated.
Thanks in advance,
M.

One of the computers on my homesharing network is automatically downloading purchases even though settings are not checked for this to occur? What am I missing here? BTW only one of the three computers (pc) is doing this.

We have three computers (two pcs and one mac) on our home sharing network. When I buy a song on my pc it is automatically downloading it to my husband's pc - but not my daugher's mac. The settings on each library do not indicate any items should automatically download. What am I missing here? This is a relatively recent thing I just noticed. It was not always happening in this way. Help. Both pcs are on Windows 7. Thanks in advance for any help. My husband and I don't always like the same songs so I need help to get back to marital bliss....

I think I found the answer to my own problemin case anyone experienced the same thing. There is a separate spot in itunes under preferences to allow for automatic downloads from other devices. It seems unrelated to home sharing. I unchecked the boxes under the "store" section and that appears to have taken care of the issue.

What will make it so you can't move objects by click and drag even though they are not locked?

I have been using the cc 2014 version for awhile now and this morning when I select an object with the selection tool, I can't freely move it by click and drag. The object will move with the arrow keys and can be aligned with the alignment tools.

Does it have a fill of None? Maybe you're trying to select the object on its "fill" but if there's no fill, it does not get selected.

Blu-ray Error: "not enough free storage" - even though 800MB are free

I'm trying to burn a Blu-Ray, about 2h20min worth of VBR 2pass HD video exported therough Premier 5.5 via the "Queue" (Media Encoder). Using the Blu-ray mpeg preset with the target bitrate slightly reduced.
Anyway, point is that Disc Info in the Build tab says 24.18 GB used, 818.9 MB free, yet when I go to burn I get "Blu-ray Error: 'not enough free storage', Code '25', Note: 'Not enough disc space.'" I've had problems with dual layer DVDs in the past, but I have successfully burned blu-ray before (but with not as much content). So I tried doing my workaround for DLs, which is burning to a folder with the intention of going through ImgBurn. But when I try to do a Blu-ray folder I get 'Blu-ray Error: 'device not ready,' Code '3', Note: "File can not open.(F:\Encore Projects\Geprges and Julie Bluray\AuthorScriptHDMVSessions\Gerpges Julie export 1 bluray 2pass high.m2v.00_28_02_22.9.2011_UTC_04_00DST.ves.)- "
("Georges and Julie" is name of my file and project.)
Any ideas? For the record, yes I am running as administrator.

Well, this is a bug that has been running since, I think, CS5 and is still there in CS5.5
This error code 25 would come when you burn to the Blu-ray Image and not with Folder and Disc.
And regarding the error code 3 that came while burning to folder, this is because sometimes with multiple burning attempts of the same project causes the session files of the project go corrupt. So FIRST TAKE A BACK UP OF YOUR PROJECT (save as your project to some other place to retain a copy of it) and then clsoe the project and delete all the session files from the project folder. Delete the session files and Not the Sesson folder.
Reopen the project and build. This should work.

Rejected by Apple because of iBeacon even though we are not using such thing

Hello all,
We are developing a game using Adobe Air and were rejected, here's the rejection letter:
Reasons
2.16: Multitasking Apps may only use background services for their intended purposes: VoIP, audio playback, location, task completion, local notifications, etc.
2.16
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for iBeacon in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.
It says "We noticed your app declares support for iBeacon in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location." but our info.plist file declares nothing of the sort, the file is attached at the end of this post. Upon further investigation we discovered that the following libraries, included by the compiler, declare UIBackgroundModes=[location,audio] and listeners for iBeacon:
flexSDK/lib/aot/lib/libDebugger2.arm-air.a
flexSDK/lib/aot/stub/UIKit.framework/UIKit
The declarations can be seen if you look for the words UIBackgroundModes and beacon in the files.
Is there any way not to include the declarations for iBeacon in an adobe air app that doesn't need it?
Can you guys help us out?
info.plist:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
    <dict>
        <key>CFBundleAllowMixedLocalizations</key>
        <true/>
        <key>CFBundleVersion</key>
        <string>1.40.0</string>
        <key>CFBundleShortVersionString</key>
        <string>1.40</string>
        <key>CFBundleIdentifier</key>
        <string>com.505games.WickedGame</string>
        <key>CFBundleInfoDictionaryVersion</key>
        <string>6.0</string>
        <key>CFBundleExecutable</key>
        <string>wicked</string>
        <key>CFBundleName</key>
        <string>WICKED Game</string>
        <key>CFBundlePackageType</key>
        <string>APPL</string>
        <key>DTCompiler</key>
        <string>com.apple.compilers.llvm.clang.1_0</string>
        <key>DTPlatformBuild</key>
        <string>11B508</string>
        <key>DTPlatformName</key>
        <string>iphoneos</string>
        <key>DTPlatformVersion</key>
        <string>7.0</string>
        <key>DTSDKBuild</key>
        <string>11B508</string>
        <key>DTSDKName</key>
        <string>iphoneos7.0</string>
        <key>DTXcode</key>
        <string>0502</string>
        <key>DTXcodeBuild</key>
        <string>5A3005</string>
        <key>LSRequiresIPhoneOS</key>
        <true/>
        <key>MinimumOSVersion</key>
        <string>6.1</string>
        <key>NSMainNibFile</key>
        <string>MainWindow</string>
        <key>NSMainNibFile~ipad</key>
        <string>MainWindow-iPad</string>
        <key>CFBundleResourceSpecification</key>
        <string>ResourceRules.plist</string>
        <key>CFBundleDisplayName</key>
        <string>WICKED Game</string>
        <key>UIStatusBarHidden</key>
        <true/>
        <key>UIViewControllerBasedStatusBarAppearance</key>
        <false/>
        <key>CTAspectRatio</key>
        <string>any</string>
        <key>renderMode</key>
        <string>direct</string>
        <key>CTRequestedDisplayResolution</key>
        <string>high</string>
        <key>DebugMode</key>
        <false/>
        <key>EnablePingback</key>
        <true/>
        <key>CTNamespaceURI</key>
        <string>http://ns.adobe.com/air/application/4.0</string>
        <key>CTAutoOrients</key>
        <true/>
        <key>CTInitialWindowTitle</key>
        <string>ios</string>
        <key>CTInitialWindowContent</key>
        <string>ios.swf</string>
        <key>CTMaxSWFMajorVersion</key>
        <string>23</string>
        <key>CFBundleSupportedPlatforms</key>
        <array>
            <string>iPhoneOS</string>
        </array>
        <key>UIStatusBarStyle</key>
        <string>UIStatusBarStyleBlackOpaque</string>
        <key>UIRequiresPersistentWiFi</key>
        <string>NO</string>
        <key>UIPrerenderedIcon</key>
        <true/>
        <key>UIApplicationExitsOnSuspend</key>
        <false/>
        <key>FacebookAppID</key>
        <string>509901862398812</string>
        <key>UIDeviceFamily</key>
        <array>
            <string>1</string>
            <string>2</string>
        </array>
        <key>CFBundleURLTypes</key>
        <array>
            <dict>
                <key>CFBundleURLSchemes</key>
                <array>
                    <string>fb509901862398812</string>
                </array>
            </dict>
        </array>
        <key>iTunesAppID</key>
        <string>693001332</string>
        <key>ANEDebug</key>
        <false/>
        <key>UIRequiredDeviceCapabilities</key>
        <array>
            <string>armv7</string>
            <string>opengles-2</string>
        </array>
        <key>CFBundleIconFiles</key>
        <array>
            <string>Icon-Ipad-152.png</string>
            <string>[email protected]</string>
            <string>Icon-Iphone-120.png</string>
            <string>[email protected]</string>
            <string>Icon-Small-80.png</string>
            <string>Icon-Ipad-76.png</string>
            <string>Icon-Large.png</string>
            <string>Icon.png</string>
            <string>Icon-Small-50.png</string>
            <string>Icon-Small-40.png</string>
        </array>
        <key>UISupportedInterfaceOrientations</key>
        <array>
            <string>UIInterfaceOrientationPortrait</string>
            <string>UIInterfaceOrientationPortraitUpsideDown</string>
            <string>UIInterfaceOrientationLandscapeRight</string>
            <string>UIInterfaceOrientationLandscapeLeft</string>
        </array>
        <key>Extensions</key>
        <array>
            <string>com.hasoffers.MobileAppTracker</string>
            <string>com.sticksports.nativeExtensions.SilentSwitch</string>
            <string>com.milkmangames.extensions.RateBox</string>
            <string>com.freshplanet.AirInAppPurchase</string>
            <string>com.milkmangames.extensions.GoViral</string>
            <string>com.chartboost.plugin.air</string>
        </array>
        <key>CTAirSdkVersion</key>
        <string>14.0.0.110</string>
        <key>CTHideAneSymbols</key>
        <false/>
    </dict>
</plist>

FIXED (for our project at least)
What the apple reviewer actually meant was that iBeacon was being enabled for the project but the info.plist didn't declare the use of location services which didn't make sense to them, I guess that implementations of iBeacon only make sense to apple if location services are used in the implementation. The problem with our project was that a third party ANE declared usage of iBeacon without us knowing anything about it and that was causing all the trouble. We contacted this third party and they updated the ANE. The game is up in the app store now.
Regards

Wireless keyboard is not recognised on startup even though batteries are not flat?

Similar Messages

Maybe you are looking for