Wireless keyboard light on caps button does not come on

wireless keyboard light on caps button does not come on

Hello:
That is some sort of anomaly that I have also noticed. On the rare occasions when that happens, a restart corrects the issue.
Barry

Similar Messages

Open Task Button does not come in Outlook

I have a three level approval workflow in which each level an email is generated to the approve to approve or reject.
But suddenly the Open Task Button does not pop up in Outlook 2010 anymore can you tell me why?
Srinivasan Kidambi

had the same issue with External users not using Outlook. This is how I fixed it:
Open the task list that the workflow is using and connect it to Outlook. Then kick off a workflow to make a new task. Once the task is made open the task from Outlook. The bottom options (review, perform the specific req. for the task, and Open this task)
are now links. Hover your mouse over the link and you will see the address.
Now open SPD, connect to your site and open the work flow assc. to the doc lib.
Start editing the workflow and click the "Approval" link
Click "Change the behavior of a single task"
You are going to have to look for all the instances of "then e-mail task notification to "Current Task:Assigned to"
Open "Current Task:Assigned to"
Click where you want he link to go and hit the Hyperlink button
name the link whatever you want, then hit the string builder ("..." button)
Copy the link from the Task in Outlook into the string builder (if you use External addressing you can also hard code the External address).
At the very end of the link where is says ID=(then a number) delete the number and DO NOT put a space. Click the Add or Change Lookup button and use "Current Task: Approval" "ID" "As String" and click ok. Should like this:
Now this will not pop the form up, but it will send the user straight to the task form (might have to enter username and password) for the correct task. Remember to do this to all the "Current Task:Assigned to" in the workflow. It sounds like a chuck of
work but it does not really take thaty long on the OOTB Approval workflow.
Just wanted wanted to add my two cents.
Also check
http://social.technet.microsoft.com/Forums/en-US/417466a3-cdcb-4559-8453-9fff6da4aceb/getting-around-a-missing-open-this-task-button-in-a-nonoutlook-email?forum=sharepointcustomizationprevious
If this helped you resolve your issue, please mark it Answered

I am unable to remove imported photos from the iPad. The red delete button does not come up and synching did not help. Any ideas

I am unable to delete photos that have been imported from a camera. The red delete button does not appear and synching with the photos ticked and then unticked does not work either. I have also tried attaching the iPad to the PC and looking for the photos using windows file management. However the only photos that I can find are those taken by the iPad itself. I am confused about why something that should be simple is not.

If photos were synced from your computer then they can't be deleted directly on the iPad, you will need to remove/de-select them from where you synced it from on your computer and re-sync.
http://support.apple.com/kb/HT4236

What's wrong with the built-in keyboard on my macbook? The caps button does not work rite, no matter what letter button i push they all come out capitals and the number keys when pushed display the special characters instead of the numbers!

the built-in keyboard on my macbook is not functioning right, the number keys when pushed display the special characters instead of the numbers,
the caps button doesn't work at all, the letter buttons display capitals when pushed whether the caps button is on or off, the shift keys are also out of whack!!
It seems it somehow got relocated to the "0" button because if you push and hold the zero button down the keyboard seems to operate normally, the number keys display numbers when pushed the letter keys display lower case when pushed but release the zero button and your back in the twilight zone!! Can anybody help me resolve this issue? one more thing im using an external usb keyboard right now and it seems to function properly if that helps any.

You would do better in the actual macbook pro forums (this is not).

Lost all songs, trying to reset or restore, source button does not come up

Windows XP
Windows XP

AdBlock Plus does not block frames, it block most ads on web pages.
AdBlock Plus is an Extension, not a Plugin
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

ATV menu does not come up on TV screen

I am unable to connect the ATV with my Phillips HD. It appears that ATV is not able to access my wireless system since the ATV menu does not come up. I installed ATV on another TV and it worked fine. On this set I have 3 HDMI ports and have tried all of them. The #1 port works with my cable company. When I try the ATV on that same HDMI I don't get any video. I purchased a HDMI switch and tried it. The cable signal is fine but when I switch to ATV...nothing. I've unplugged everything to reset. Help?

If you have no video at all, it's not a problem with the network.
Check that the HDMI cable is correctly seated at both ends.
Try disconnecting the cable and connecting it again.
Try another HDMI cable.
Make sure your TV supports 720p

TS3048 My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.

My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?

Hello:
Try resetting the SMC and PRAM.
Barry

My Macbook built-in keyboard has stopped responding, (even caps lock light does not come on). What can I do as cannot even login to computer?

My Macbook built-in keyboard has stopped responding, (even caps lock light does not come on). What can I do as cannot even login to computer?
There has been no spillage and it has not been dropped.

Do you have access to a USB wired Apple (or maybe even a PC) keyboard?
That may be used to help troubleshoot the internal keyboard and on startup
be able to access (or see if you can) the System, and attempt to see about
troubleshooting. See if it will start in SafeBoot, (shift key held down just after
startup tone, if it runs in safeboot, then login to see if you can read system
logs in Console) and another idea may be to attempt to start in Recovery &
then attempt to use OS X Utilities there to see if you can verify and then to
repair the hard disk drive, and do some checks on the hardware.
•Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Was the computer an Apple official refurbished unit bought direct from Apple?
Did you get an extended warranty from Apple - if it were directly bought there?
Usually these are online purchases from Apple Store; other companies offer
repaired or restored used computers and call them 'refurbished' or they may
have bought actual refurbished from Apple stock; these may be resold on ebay
or via amazon, and may or may not have a residual warranty of some kind.
In some cases the keyboard may fail due to some connection on the logic board
not fitting correctly, or some other loose wire; however if the battery may have
swollen, that could contribute to issues with both trackpad and keyboard.
A visit to an authorized Apple service provider is recommended, or contact the
seller you bought yours from to ask if they may offer suggestions or perhaps a
discount on diagnostic + repair if there is no warranty on the product.
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
https://locate.apple.com/country - locate authorized sales, service, by country.
Without more information, you may have to look into your local consumer
protection laws to see if your area may allow you more than others when
it comes to problems with electronics. If in the EU or UK, it may be longer.
You could contact a nearby Apple Store with Genius bar for advice...
Good luck & happy computing!

Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?

Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

How do I send text messages from my Ipod touch? The "send" button does not light up after typing in the message.

How do I send text messages from my Ipod touch? The "send" button does not light up.

First of all, you need you have at least iOS 5 installed. Second, the person you are texting must have an iDevice with iOS 5 or higher installed. You can´t send messages to an non-iDevice. You´ll also need an Wi-Fi network to send iMessages. Hope it helped!
Message was edited by: AppleTechTalk1100

/proc/acpi/button does not exist.

/proc/acpi/button does not exist. Any ideas?
or, anyone knows which module is the owner of /proc/acpi/button?
Thanks!

I am having the same problem, even with a stock kernel. There is no power button
device and therefore acpi_listen does not detect putton press events. I am on a
Thinkpad T420s, which used to work until a recent reinstall. Here are the
outputs that were originally requested (most of them look quite similar to
enicham's):
% lsmod | grep evdev
evdev 11784 27
% ls /dev/input
by-id event10 event14 event2 event6 mice
by-path event11 event15 event3 event7 mouse0
event0 event12 event16 event4 event8 mouse1
event1 event13 event17 event5 event9 mouse2
% cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab54
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=046d Product=c52b Version=0111
N: Name="Logitech Unifying Device. Wireless PID:101b"
P: Phys=usb-0000:00:1a.0-1.2:1
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input2
U: Uniq=
H: Handlers=mouse0 event1
B: PROP=0
B: EV=17
B: KEY=ffff0000 0 0 0 0
B: REL=143
B: MSC=10
I: Bus=0003 Vendor=046d Product=c52b Version=0111
N: Name="Logitech Unifying Device. Wireless PID:4002"
P: Phys=usb-0000:00:1a.0-1.2:2
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input3
U: Uniq=
H: Handlers=sysrq kbd event2
B: PROP=0
B: EV=12001f
B: KEY=837fff072ff32d bf54444600000000 1 30f948b17c007 ffff73fad941dfff febeffdfffefffff fffffffffffffffe
B: REL=40
B: ABS=100000000
B: MSC=10
B: LED=1f
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
U: Uniq=
H: Handlers=event3
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input7
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=17aa Product=5054 Version=4101
N: Name="ThinkPad Extra Buttons"
P: Phys=thinkpad_acpi/input0
S: Sysfs=/devices/platform/thinkpad_acpi/input/input8
U: Uniq=
H: Handlers=kbd rfkill event7
B: PROP=0
B: EV=33
B: KEY=18040000 0 10000000000000 0 1501b00102004 c000000001104000 e000000000000 0
B: MSC=10
B: SW=8
I: Bus=0003 Vendor=04f2 Product=b221 Version=0752
N: Name="Integrated Camera"
P: Phys=usb-0000:00:1a.0-1.6/button
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input9
U: Uniq=
H: Handlers=kbd event8
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input10
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0001 Vendor=14f1 Product=506e Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input12
U: Uniq=
H: Handlers=kbd event10
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
U: Uniq=
H: Handlers=event12
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA NVidia HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
U: Uniq=
H: Handlers=event13
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA NVidia HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
U: Uniq=
H: Handlers=event14
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA NVidia HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
U: Uniq=
H: Handlers=event15
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input11
U: Uniq=
H: Handlers=mouse1 event16
B: PROP=9
B: EV=b
B: KEY=6420 30000 0 0 0 0
B: ABS=260800011000003
I: Bus=0011 Vendor=0002 Product=000a Version=0000
N: Name="TPPS/2 IBM TrackPoint"
P: Phys=synaptics-pt/serio0/input0
S: Sysfs=/devices/platform/i8042/serio1/serio2/input/input18
U: Uniq=
H: Handlers=mouse2 event17
B: PROP=0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
% pacman -Qi linux
Name : linux
Version : 3.14.5-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.14.5
Depends On : coreutils linux-firmware kmod
mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels
of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 71950.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sun 01 Jun 2014 01:40:01 AM EDT
Install Date : Sat 07 Jun 2014 02:21:14 PM EDT
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
% journalctl | grep dev/input
Jun 07 19:14:16 unmensch systemd-logind[286]: Watching system buttons on /dev/input/event6 (Power Button)
Jun 07 19:14:16 unmensch systemd-logind[286]: Watching system buttons on /dev/input/event3 (Video Bus)
Jun 07 19:14:16 unmensch systemd-logind[286]: Watching system buttons on /dev/input/event4 (Lid Switch)
Jun 07 19:14:16 unmensch systemd-logind[286]: Watching system buttons on /dev/input/event5 (Sleep Button)
Jun 07 19:14:16 unmensch systemd-logind[286]: Watching system buttons on /dev/input/event7 (ThinkPad Extra Buttons)

My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

This didn't work for me, so I did a bit of searching and TONS of pages later in google, I found an answer. Here are the steps for people who also were in my situation:
1. Take off bottom case
2. Unplug battery - blurry image here: http://i.ytimg.com/vi/03cC79r5Dx4/0.jpg
3. Press and hold power button for 5 seconds
4. Plug a charger in, and it should start booting up
5. After shutting down again, reconnect the battery and close the case up
6. It works! (hopefully, if you guys had the same situation I did)

My mouse can not click to anything left, right or the middle mouse button does not work

I am using a 24 inch imac and the problem is suddenly my mouse can not click to anything left, right or the middle mouse button does not work i can see cursor moving and i can use the features of the keyboard but my mouse dies. I tried to plug in another mouse magic trackpad and my tablet but each has the same problem. I can not click to anything but cursor is moving and computer is not frozen. I have to shut it off from the power button when this happens. Do you have any idea what can cause this and how can i fix this?

Reset the SMC 2-3 times. Click Intel iMac SMC and PRAM resets for instructions.

Iphone 5 home button does not respond, brightness reduces by itself, wont charge and its one week since i got it!

one week since i got the iphone 5: screen blacks out, when i finally get it to light up the light brightness turns low.
problems charging phone, just doesnt want to charge unless i reset the phone.
the main home button does not respond at times, approx 3-5 times a day this occurs
phones touch screen does not respond at times...whole touch screen, no response!
signal always drops out, this could be a network issue though i doubt it.
speaking to quite a few peopl i know, they are havng the same issues with there 5 but not as often as myself.
if i knew the 5 had so many issues i would not have chosen it, the 4s was fine!

Then take it back! If you've only had it for a week, you still have 51 weeks of warranty. If you are in the USA, you are also within your 14 day unconditional return for full refund period. If it has that many problems, just return it and get another one, or get your money back and buy something else. There is no reason to live with a faulty device after just one week.

Cancel button does not work properly in ProgressMonitor

The cancel button does not work properly in my ProgressMonitor.
Only the keyboard Enter key is accepted but no mouse click.
Everything else works fine.
What could be wrong????
Thank you!

Yes, there is a monitor.isCanceled() and it works if the enter key is pressed. However, a mouse click on the cancel button does not work!!!
Please help.
m_btnSave.addActionListener(new ActionListener() {
     public void actionPerformed(ActionEvent arg0) {
          final int maximum = getMyModel().getList(MerchantHierPropagateMgrDataInterface.ATT_MAN_RESULT).size();
          class TimerListener implements ActionListener {
               public void actionPerformed(ActionEvent evt) {
                    System.out.println("*************isCanceled = "+ m_monitor.isCanceled());
                    if (m_monitor.isCanceled() || getMyModel().isDone()) {
                         m_timer.stop();
                         m_monitor.close();
                         if (getMyModel().isDone()) {
                              m_ok = true;
                              close();
                         else {
                              m_worker.interrupt();
                              try {
                                   m_pm.rollback();
                              } catch (SQLException e) {
                                   BPrompter.showException(e);
                                   Log.printOutAlways(e);
                    else {
                         int progress = getMyModel().getProgess();
                         int prozent = maximum == 0 ? 0 : 100 * progress / maximum ;
                         m_monitor.setProgress(progress);
                         m_monitor.setNote("Fertigstellung: (" + prozent + "%) " + progress + " von " + maximum);
          if (getModel().getList(MerchantHierPropagateMgrDataInterface.ATT_MAN_RESULT).size() > 100) {
               if (BPrompter.showConfirmDialog("Diese Funktion kann mehrere Minuten dauern.", "Hinweis") != JOptionPane.OK_OPTION) {
                    return;
          m_monitor = new ProgressMonitor(FrameApplication.getInstance(), "Fortschritt der Weitergabe",
                    "Initialisierung", 1, maximum);
          m_monitor.setMillisToDecideToPopup(0);
          m_monitor.setMillisToPopup(0);
          m_timer = new Timer(500, new TimerListener());
          m_timer.start();
          m_worker = new SwingWorker() {
               public Object construct() {
                    try {
                         getMyModel().propagateToMerchantsAndTerminals(m_pm,     m_mutationInZukunftZuErledigenBisDate);
                    } catch (PersistenceException e) {
                         Log.printOutAlways(e);
                         return e;
                    return Boolean.TRUE;
               } // constuct()
          }; // SwingWorker
          m_worker.start();
});

Wireless keyboard light on caps button does not come on

Similar Messages

Maybe you are looking for