Wireless keyboard not connecting

My wireless keyboard has suddenly stopped working, I've changed the batteries and it continues to not be discoverable via bluetooth.  How do I reconnect it?

Open Bluetooth Setup Assistant and while that's searching for Devices turn the keyboard off and on (repeat) to re-pair it.

Similar Messages

  • Wireless keyboard not connecting to iPad?

    New wireless keyboard not connecting to iPad.

    Hi skippybball10,
    If you are having issues pairing your wireless keyboard to your iPad, you may find the following articles helpful:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    iOS: Apple Wireless Keyboard compatibility
    http://support.apple.com/kb/ht4112
    Regards,
    - Brenden

  • Apple Bluetooth Wireless Keyboard not Connecting to iPad

    Hey, I try to connect my Apple Bluetooth Wireless Keyboard is not connecting to my iPad. I tap Bluetooth "On" and it searches for devices. Then I slide the switch on the back of my keyboard to the green light and the iPad picks it up and says "Not Paired." So I tap the keyboard and it just spins and spins and spins until the keyboard times out and powers off. Then it disappears and my iPad can't find any devices. I repeated the process several times and I got the same result.
    Any help would be appreciated!
    Thanks

    I had a very similar problem, with a new model wireless keyboard. The set-up is not very intuitive (and the instructions for both the iPad and the keyboard are not particularly helpful). Here's how I got it to work:
    1. If the keyboard has already been paired with another object -- e.g., I was testing out my iMac keyboard -- you should be completely out of range of that other object (more than 30 feet away).
    2. Make sure Bluetooth on the iPad is disabled.
    3. The keyboard should not be "on" -- i.e., no solid green light.
    4. Press and hold the power button on the keyboard until you get a blinking green light. This should take just a few seconds.
    5. Turn on Bluetooth on the iPad.
    6. At this point, it should detect the keyboard and instruct you to enter a combination of keys to pair the two devices.
    I found that you have to follow this sequence or it won't work. For example, if you have Bluetooth on on the iPad before holding the power button on the keyboard, it won't work.
    I hope that helps.

  • Apple Wireless Keyboard not connecting

    I started up my iMac this morning to notice that the keyboard was not connected, meaning I could not enter my password. The moment I started typing a dialogue would pop up to pair a wireless keyboard. Near the bottom it said "attempting to connect to Apple Wireless Keyboar #1" but after a few seconds it just said "no devices found. It just repeats this process over and over. I've replaced the batteries and tried resetting the keyboard but neither solved the problem... Is there any way to force pair? I don't have access to another keyboard and need to use my computer. Please help!

    Sadly, I think you're stuck without a USB KB at this point.

  • TS3048 wireless keyboard stopped connecting. Tried all remedies on forum, nothing worked. Keyboard blinks green, but not discovered by iMac.

    Wireless keyboard stopped connecting to iMac. Replaced batteries, restarted computer. Keyboard blinks green- cannot get steady green light. Computer does not recognize keyboard, nor connect. Tried deleting device and re-connecting, but keyboard is never seen by the Mac. Also tried same keyboard with a Macbook Air and keyboard was not recognized. other bluetooth device (mouse) works fine. Ideas?

    For now, try a SMC reset.
    DALE

  • Apple Wireless Keyboard lost connection when "command+space" is pressed

    Hi, my apple wireless keyboard lost connection when command and space key was pressed. it does not lost connection when other keys combination was pressed. Are there any people has the same problem with me?
    I am using Emacs all the time, the command and space key is the default short cut for Mark in Emacs. It is constantly used in my daily work. The wireless keyboard does not lost connection always, but it does lost connection sometimes. I have observed every time it lost connection, the command + space was pressed. Really strange. Any advice?
    I am using Macbook Pro 13inch Late 2012,  OSX 10.9.1, and Apple Wireless Keyboard

    Got the keyboard working again, here how incase it can help anyone else:
    I borrowed a USB keyboard to allow me to get past the pasword login.
    First I rang disk utitlity to repair any permissions. I opended up the app 'Bluetooth Setup Assistant' selected 'Keyboard' then I turned the keyboard 'on' so the green light is flashing' and then hit continue. At this point the keyboard appears in the listing of found items, hitting continue I am then given a unique pairing code. Enter this on the keyboard and hit 'Return' after a few seconds, the pairing is complete and by wireless keyboard is back and working again!

  • Wireless keyboard not sync

    wireless keyboard not syncing, comes up located and then not found

    Try resetting your SMC and keep any other keyboards turned off or unplugged when you start the computer up, being sure also to have the new keyboard turned off during startup.
    Since no keyboard will be detected, the iMac will prompt you about pairing a keyboard. Once you see that prompt, turn the keyboard on, and it should walk you through the pairing process.
    To find out how to reset the SMC, follow http://support.apple.com/kb/HT3964.
    Give it a try. Good luck, and keep us posted.

  • New Galaxy 5s.  Trying to connect to a guest wireless that routes browser to a login screen.  The wireless will not connect (gives authentication error), so will not pull up browser window.  My previous Android did not have this problem (it would connect

    New Galaxy 5s.  Trying to connect to a guest wireless that routes browser to a login screen.  The wireless will not connect (gives authentication error), so will not pull up browser window.  My previous Android did not have this problem (it would connect and immediately reroute to the login screeen).

    Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?

  • TS3048 wireless keyboard will connect but pairing is unsuccessful

    My brand new wireless keyboard will connect but pairing is unsuccessful. OS X version 10.6.8. Any ideas of what the problem is?

    I'm a bit confused, the keyboard must be first paired in order to connect.  What do you see when you use System Preferences > Bluetooth > click the "+" icon to add a device.
    Regards,
    Captfred

  • When I wake my iMac from sleep, the wireless does not connect.  I have to shut shutdown and then restart and then it connects.  I am running Lion 10.7.3  Any thoughts?

    When I wake my iMac from sleep, the wireless does not connect.  I have to shut shutdown and then restart and then it connects.  I am running Lion 10.7.3  Any thoughts?

    Been waiting along time for this problem to be fixed. Unfortunately the update hasn't help at all and even made the situation worse. Now my airplay connection from iMac to stereo abruptly stops after about 10-15 min. so I have to go over and quit wifi, start it up and find my airport network. Not sure why it always has a problem with the apple airport network. My neighbor's pc network is always there.

  • IMac 27" with Win7, Apple bluetooth keyboard not connected, STUCK.

    I made a huge (and naive and stupid) mistake and now have an iMac stuck at the Win7 boot screen because it can not find the keyboard. I can't boot it back into OSX either because the keyboard OPT key is not recognized. Here is what happened:
    My iMac 27" was working perfectly in dual boot mode and I could arbitrarily boot in either OS without problem since 3 months. Well, today, a friend called and said that her Apple keyboard is not recognized by Win7 on her iMac and she can not type. So I made sure that the battery is good and the green light is on, then I told her to go into the bluetooth device panel and remove the keyboard then re-pair it again. My thought was that I have done that with all bluetooth devices in Windows without problem, and Apple hardware and software is solid, so that got to work without a glitch, right. WRONG. She struggled to pair and connect the keyboard in Win7 to the point that I said I will remove my keyboard device and reconnect it so I can tell her the exact steps. Well, I learned the hard lesson with Apple stuffs myself. After removing the keyboard device, I could pair it, but not without difficulty. Then, however, does not connect, since I could not type and the device driver says that the device can not be started. Then I read messages in the Apple forum recommending to boot up in to OSX to remove the device there and boot it back into Win7 to pair it. OK. I used the mouse to shut down the Win7 and forgot that I have no keyboard now. I couldn't have used Boot Camp control panel to boot into OSX but I was so confident in Apple that I did not think about it. Now, I am stuck with a machine that boots into Windows without stopping and hangs at the first screen because the keyboard is missing. I inserted the OSX DVD in the hope that it would boot from the DVD but it does not. And the DVD is of course stuck in the drive. I am working at a remote location and do not have a usb keyboard or anything else.
    Can anyone recommend a procedure to boot into OSX in my situation? Or can anyone tell me if I can pair and connect the keyboard in the BIOS? I googled but could not find anyone in a similar situation like mine. My friend can take her machine to Apple store for service, but I am in a country that has no Apple store.
    Thank you very much for any hint.
    tom

    I don't know but I installed my Windows 7 with Bootcamp without using a USB keyboard (cuz I don't have one). But you will at least need a USB mouse though. The moment it requires me to use keyboard input for various of information the bootcamp already downloaded required drivers and updates for my wireless keyboard to work. Make sure your wireless keyboard are on and try type something on it (it goes into some sort of sleep mode when you first start it).
    Message was edited by: Aetherbomb

  • Wireless keyboard not working with Boot Camp

    I have a brand new 15" Macbook Pro.  I need to run Windows for work so I installed Boot Camp and Windows 8.1.  I have a HP wireless keyboard with a USB dongle.  It will not work at all.  Windows recognizes that I've plugged in the dongle but the keyboard won't work at all.  It's a brand-new keyboard and the batteries show full charge.  All drivers look good in device manager.  When I went thru the Windows troubleshooter, which is typically worthless, it said something about the dongle being USB 2.0 and the Mac's USB is 3.0.  But shouldn't it be backward compatible?  It has no problem with my old wireless mouse with a USB dongle.
    I also notice a significant difference in the clarity on my dual external monitors with Windows instead of OSx.  The colors aren't as sharp and the text isn't as clear - kind of fuzzy.  Is that just how it goes with boot camp, or is there anything I can do, like maybe an upgraded driver, to get the same clarity on my dual monitors with Windows like I get with OSx?
    Any help is appreciated.

    Unfortunately I can't turn off Bluetooth in Win 8.1.  I go to the page where i should see the slider and the page just spins and spins.  I thought my install might be hosed so I blew it away and did a fresh boot camp install.  Still no joy; BT still spins - and I still can't connect to the USB keyboard.  I can plug the dongle in and see it in devices, and it says it's ready to go but the keyboard doesn't work.  It's brand-new and has worked on a Windows box so I know it's not a bad keyboard.  Maybe time to go back to a Windows box and ditch boot camp?

  • Wireless Keyboard not working with iPad2

    I've already wasted way too much time on a Apple product that has changed my mind about the company. I jumped through all of the necessary hoops to engage my wireless keyboard with my iPad2 but the keyboard will not type a single word. It says it's connected but it's not working. I got it to type twice for about 5 seconds each time but that was it. If anyone has any suggestions I'm all ears. I hope there is a simple fix.

    The key lag or delay seems like it's a setting in the keyboard settings/ipad keyboard settings itself. Witness the keyboard preference pane in mac os x. I wonder if it's a accessibility setting...
    To rule out third party apps:
    1. Launch the Notes app. Type. If the notes app does not have the issue, it is the specific third-party apps you are using. I notice that some apps do not support bluetooth keyboards. Normally, they don't type at all.
    But who knows?
    2. Look for something in setting that controls keyboard delay?
    Shut down any "open" apps. (I know that multiple apps cannot run at the same time on the ipad, but humor me.) [Note: just replicating what apple sometimes has people try.]
    Turn off wi-fi and cellular data. Test again.
    If this works, some syncing or downloading activity is happening in the background and creating lag.
    Given that entering the code works fine, I doubt the hardware or bluetooth connection is faulty.
    Post back with results and we'll decide what to do.
    P.S Have you tried pairing the keyboard to a computer? Does this work ok?

  • Apple Bluetooth Keyboard Not Connecting

    Hello,
      I have an iPad 3 (model MD340LL/A) given to me by my school and the standard Apple Bluetooth keyboard.  Last year, I used the keyboard with my iPad without a problem.  However, my school collected our iPads over summer and did a software reset on them and set them up with their own system (a few standard apple apps are disabled).  Since I got my iPad back, my keyboard will not connect to it.  The iPad is physically the same one I had last year, but the software was reset.  When I press the power button on the keyboard, the light turns green for around 3-4 seconds and then turns off.  It won't go into discoverable mode where the light starts flashing.  we have tried connecting it to my dad's MacBook, and it sometimes shows up while searching for a device, but any attempt to connect to it ends in a pairing unsuccessful message.  How can I get my keyboard to connect to my iPad?  The iPad is on iOS 7.1, and I know that none of my school's changes to the iPad should affect my keyboard, since they haven't changed from last year when they worked fine.
    Thanks,
      Nihar

    Change the battery in the keyboard.
    iOS: Apple Wireless Keyboard compatibility
    http://support.apple.com/kb/HT4112
    Bluetooth: How to set up your Apple Wireless Keyboard
    http://support.apple.com/kb/ht1809
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
     Cheers, Tom

  • Magic mouse and aluminum wireless keyboard not working in windows 7

    Aluminum wireless keyboard (fully upgraded firmware as of 2/19/2010) not working, or magic mouse. Both from Apple Store, not amazon or ebay.
    No error shown for magic mouse, only "connecting to device" for 15 minutes now.
    With keyboard, at times it shows an error, but sometimes it lets me type a passkey. It doesn't recognize the passkey although it's saying it's paired, it doesn't work.
    Help?

    Getting Bluetooth set up initially in Bootcamp is a bit of a hit and miss affair in my experience, but persistence pays off, and connection is reliable. I gave up with the keyboard on my Mac Pro at one stage, tried again a few days later and it worked.
    How did you do it?
    Persistence and repetition, reading lots of threads and getting snippets from various sources, can't recall any silver bullets.
    Have you searched this forum, there are a LOT of posts on the subject.
    Links please? I can't find any.
    If you type "bluetooth" in the search box while at the top level of the Bootcamp section you will get six pages of hits. Here are just a few, not necessarily the best or a complete list or in any particular order, but they contain relevant info.
    I can't remember the detail now but one of the key steps for me was launching the bluetooth "service" mentioned in some of these links. Initially option wasn't appearing at all. Also mine (and others) seems to need a single click after boot to be activated. If you try and move it before a click it won't respond so you might think it wasn't working.
    BTW I am assuming you have successfully installed the Boot Camp 3.1 drivers?
    http://discussions.apple.com/thread.jspa?threadID=2221427&start=0&tstart=0
    http://discussions.apple.com/message.jspa?messageID=10943844#10943844
    http://discussions.apple.com/thread.jspa?messageID=10669525&#10669525
    http://discussions.apple.com/thread.jspa?threadID=2057008&tstart=0
    http://discussions.apple.com/thread.jspa?messageID=10948512&#10948512
    http://discussions.apple.com/thread.jspa?messageID=10935130&#10935130
    I am afraid at this point I stopped trawling through looking for the most relevant ones so the above is incomplete.

Maybe you are looking for

  • APEX 3.1.0.00.32 doesn't work with ORACLE 10g SE 10.2.0.1.0

    I have Oracle 10g Express Edition 10.2.0.1.0 under Windows XP SP2 on my Personal Computer. There is installed the too , which is working fine. Also I have Oracle 10g Standard Edition 10.2.0.1.0 (after installing Oracle 10g BI SE One) under Windows 20

  • Book preview in PDF

    Hello! I was wondering if there's a great way to automate or somehow easily undergo the process of creating a preview of a book? Much like this example: http://www.theideabook.org/pdf/Ideabook_preview.pdf Is it really just a question of creating 2 pa

  • What is absolute max ram for a macbook pro 2,16 core 2 duo processor?

    Hello guys, thanks for reading this post. i read so many people saying that my 2007 mbp only going to max at 3GB if i put 2x 2Gb ram i look up on apple store memory, my processor doesnt show as choices i then look up on OWC website, and they show my

  • So I have a new Mac Mini CD and 2 External 2.0 HDs

    I have almost 500 GB of backed up Divx Movies and Shows, but when I try to access them through FrontRow, they take forever to load. Does anyone else have this problem? Is there a way to fix it? I have 512MB Ram, so I'm not sure if that has anything t

  • How to print draft of AR invoice by making query

    Hi, do you know how I can make query of AR invoice draft so that the UDF, header, row items can be showed in it? Thanks. Raymond Edited by: Rui Pereira on Aug 6, 2008 4:11 PM