Wireless keyboard "not discoverable" after 10.9.4 upgrade?

Since I upgraded to OS 10.9.4, my wireless Apple keyboard is "not discoverable" when the iMac wakes from sleep mode. I need to restart and re-pair each time by holding down the power button on re-start. Is there an upgrade for the keyboard to make it work with the new upgrade (the mouse is working thus far)? What's the point of these upgrades? One step forward, two steps back: FRUSTRATING!!!

You may need a wired keyboard to carry out some of these steps. It's a good idea to keep a cheap wired keyboard and mouse or trackball as backups for a desktop Mac anyway, because Bluetooth isn't completely reliable.
Step 1
If the keyboard is already paired with another device, remove that pairing.
Step 2
Follow the instructions in these support articles:
How to set up your Apple Wireless Keyboard
Apple Wireless Keyboard: Difficulty during pairing process
Bluetooth devices become unresponsive
Step 3
The keyboard should pair automatically when you restart the computer. You may have to press and hold the power button on the right side of an Apple keyboard until the LED starts flashing.
Step 4
Reset the System Management Controller.
Step 5
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.Bluetooth.plist
Right-click or control-click the line and select
          Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 6
See these support articles:
Bluetooth keyboard may not pair during Setup Assistant
Wi-Fi and Bluetooth: Potential sources of wireless interference
Bluetooth: Unreliable wireless performance may occur when USB 3.0 external devices are close
Step 7
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Similar Messages

  • TS3048 wireless keyboard not responding after sleep mode

    My Apple Wireless keyboard (old style with numeric keypad) does not respond properly when my computer exits sleep mode.  Keys either don't work or a single key hit produces multiple letters / numbers on the login box. The only way to get the keyboard to work properly is to turn it off, wait until the computer says it's lost the keyboard connectilon, then turn the keyboard back on again. 
    I tried a newer Apple Wireless Keyboard (current model) with this computer, and it works properly. 
    Anyone have an idea as to what's going on here?
    Thanks

    ** SOLVED ***
    If you have a early 2011 MBP, the optibay SATA is a 6GB bit is really support 3GB/s only.
    If you have a 6GB SSD, install it in the ORIGINAL adapter and the original SSD in the optibay.
    This will **SOLVE** the issue.
    Alberto

  • IPad keyboard not responsive after iOS 7.1 upgrade

    I have an iPad Air and upgraded to 7.1. After upgrading my keyboard became almost non-responsive. It literally takes several seconds for a keystroke to appear on the screen. I have tried this in several apps with the same result.
    I reset my iPad Air and restored from my backup. No change to the keyboard behavior. Also tried resetting all settings and that did not work either.
    I also upgraded my iPhone 5 to 7.1 and am not experiencing this problem.

    I have the exact same problem on my iPad Air. Every keystroke takes up to 10 seconds to register. I have not tried any resets or restores yet.
    I'm using the norwegian on-screen keyboard. If I change to english while the keyboard is displaying, the stutter/lag/freeze disappears.
    @Shing If you're also using a localized keyboard, can you check if the problem disappears when changing to the english keyboard?

  • Keyboard wireless key not working after upgrading to windows 8.1

    Hello,
    I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
    Kindly suggest me some solution.
    Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
    Thanks.

    Hi @Jayesh_Bhadja ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
    The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook.  Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
    Make sure all your updates have been completed. I would try restarting my Notebook a few times.
    If that does not help I would uninstall the keyboard from the Device manager.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Wireless keyboard not connecting to iPad?

    New wireless keyboard not connecting to iPad.

    Hi skippybball10,
    If you are having issues pairing your wireless keyboard to your iPad, you may find the following articles helpful:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    iOS: Apple Wireless Keyboard compatibility
    http://support.apple.com/kb/ht4112
    Regards,
    - Brenden

  • Wireless keyboard not sync

    wireless keyboard not syncing, comes up located and then not found

    Try resetting your SMC and keep any other keyboards turned off or unplugged when you start the computer up, being sure also to have the new keyboard turned off during startup.
    Since no keyboard will be detected, the iMac will prompt you about pairing a keyboard. Once you see that prompt, turn the keyboard on, and it should walk you through the pairing process.
    To find out how to reset the SMC, follow http://support.apple.com/kb/HT3964.
    Give it a try. Good luck, and keep us posted.

  • T40 KEYBOARD NOT WORKING AFTER STARTUP

    IBM THINKPAD LAPTOP
    T40  237372M
    OS WINDOWS XP PRO SP3
    •86 key keyboard with imbedded numeric keypad and
    integrated UltraNav dual-pointing system, featuring TrackPoint and customized touch pad
    SUBJECT; KEYBOARD NOT WORKING
    AFTER STARTUP UNABLE TO OPEN SOFTWARE OR USE TEXT IN NOTEPAD AND OPENOFFICE
    I HAVE A TEMPORARY  SOLUTION TO OVERCOME THIS PROBLEM BY;
    1 )USING MOUSE OPEN START/ THEN  NOTEPAD
    STILL UNABLE TO ENTER TEXT
    2) OPEN START/ONSCREEN KEYBOARD CLICK ON LOCK THEN EXIT
    3)GO BACK TO NOTEPAD ENTER TEXT, NOW WORKING I THEN EXIT
    WITHOUT SAVING
    I TRIED REINSTALLING XP AND LOST MS WORD THAT IS WHY I AM USING OPEN OFFICE
    I THOUGHT IT MAY HAVE BEEN THE SP3 UPDATE BUT AFTER USING IBM SYS REINSTALL
    DURING RE INSTALL I WAS UNABLE TO USE TEXT FOR WINDOWS LOGIN
    THE ONLY KEYS TO USE WERE ÁÉÍÓÚ BEING LATIN CHARACTERS WITH ACUTE SIGN
    CAN ANYONE CAN HELP ME THANKS

    Hi and welcome to the forum!
    Does the keyboard work fine inside the BIOS?
    Also try booting from LiveCD of Ubuntu, if issue remains then the keyboard is faulty.
    Keep us informed.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

    my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

    Welcome to the HP Forums  MillaMagia,
    I see by your post that the USB isn't being recognized.
    I can help you with this issue.
    Are you using the same USB cable? (known good USB cable)
    You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
    USB 3.0 are supposed to be backwards compatible.
    Try another USB port on the Laptop, some of the USB ports are more powered then others.
    I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
    Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
    How do I get into Windows Device Manager?
    Here is a document for Identifying problems in Windows Device Manager.
    Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
    Let me know how it was listed. (screen shots welcome)
    If this is a Laptop then check the power management settings.
    Access the device manager. Windows 8-How do I access the Device Manager.
    Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
    Disconnect the USB, run the full uninstall and reinstall the printer software again.
    If you need further assistance, let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • IMessage not working after iOS 5.1 upgrade! Feedback pls

    iMessage not working after iOS 5.1 upgrade, anybody experiencing this as well? Feedback please......

    You shouldn't have to hard restart and it shouldn't have anything to do with your router.  If anyone else runs into this problem try resetting the network settings on your phone.  All the steps to do this can be found here http://tekshot5.com/ios-5-1-imessage-fix/
    Edit: Some of us don't have the option of resetting our DNS servers.  I run my own for example for caching purposes.

  • Battery #2 not present after windows 8.1 upgrade

    battery #2 not present after windows 8.1 upgrade. I am using sony vaio laptop model VPCZ2390X

     
    Hi aalmoeen, 
    Thank you for visiting Sony Community! 
    I assume your computer has an extended battery pack, right? Are you using a genuine Sony battery packs? Please follow these steps to isolate the issue: 
    Power Cycle
    Turn off the laptop -> push and hold the battery off button for 5 seconds located on the bottom of the laptop. (You may use safety pin). 
    Remove the battery pack and install it once again. Test the laptop again. 
    Remove the battery pack -> push the battery off button -> install the battery pack once again. 
    Reset BIOS
    Run Vaio update and Windows update. 
    Make sure you have the updated drivers and software, check on eSupport website. 
    For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Hope these steps help. 
    Thanks,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • Why is my Mac Pro wireless keyboard not being found after changing batteries

    Why does my Mac Pro not find the wireless keyboard after changing the batteries.  I restarted the computer but it still doesn't recognize the keyboard?

    Troubleshooting wireless mouse and keyboard issues
    OS X: Bluetooth devices become unresponsive

  • Keyboard not responding after OSX 10.7.4 update

    I have just installed the OSX 10.7.4 update.
    About 12 hours after installation the screen dimmed with a message that I need to restart the computer. I did so and now after startup I get a message on the screen that the Bluetooth keyboard can't be found. I actually have a hard wired keyboard, not a Bluetooth one, but there is no response to keys on the keyboard and I can't get rid of the screen message, even after a restart.
    So I can't start in safe mode or anything like that because the keyboard doesn't work. Any ideas on how to get around this?

    Thanks for the suggestions, but the keyboard was connected to a built-in port.
    When I came back to the computer about an hour after the problem appeared, the bluetooth message had gone and the normal keyboard was working again, so I could log in. I checked Bluetooth in System Preferences and found there was a "phantom" wireless keyboard listed, that I had never installed. I removed that from the list so hopefully the problem won't re-occur.
    Not sure whether this problem was related to the update, but from other posts, it appears to have caused a number of issues.

  • Keyboard not working after suspend to ram

    Hi,
    I have this problem since I have my notebook. Is a sony vaio cs.
    After suspend to ram the keyboard does't work.
    I've read in other forums that is a general gnu/linux problem, not only arch, and I think is related with the i8042 driver and generally hp pavillions have it.
    cat /var/log/pm-suspend.log:
    Initial commandline parameters: --quirk-dpms-suspend
    --quirk-dpms-on
    --quirk-vbestate-restore
    --quirk-vbemode-restore
    --quirk-vga-mode3
    --quirk-vbe-post
    Thu Aug 13 22:39:47 UYT 2009: Running hooks for suspend.
    /usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux vaio 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 x86_64 Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz GenuineIntel GNU/Linux
    Module Size Used by
    i915 206216 1
    drm 190080 2 i915
    i2c_algo_bit 6996 1 i915
    joydev 13312 0
    snd_hda_codec_realtek 278132 1
    btusb 15364 0
    bluetooth 65668 1 btusb
    fan 5656 0
    uvcvideo 68316 0
    videodev 42048 1 uvcvideo
    v4l1_compat 18228 2 uvcvideo,videodev
    v4l2_compat_ioctl32 10992 1 videodev
    arc4 2192 2
    vboxdrv 1723308 0
    ecb 3536 2
    snd_seq_dummy 3540 0
    cpufreq_powersave 1872 2
    sdhci_pci 9200 0
    sdhci 20116 1 sdhci_pci
    snd_seq_oss 36224 0
    snd_hda_intel 31208 2
    snd_hda_codec 82128 2 snd_hda_codec_realtek,snd_hda_intel
    iwlagn 108980 0
    snd_seq_midi_event 8592 1 snd_seq_oss
    snd_seq 64640 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 8324 3 snd_seq_dummy,snd_seq_oss,snd_seq
    cpufreq_ondemand 9256 0
    mmc_core 61984 1 sdhci
    snd_hwdep 9976 1 snd_hda_codec
    iwlcore 112976 1 iwlagn
    snd_pcm_oss 47328 0
    snd_mixer_oss 20976 1 snd_pcm_oss
    snd_pcm 90872 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    mac80211 211296 2 iwlagn,iwlcore
    ohci1394 34180 0
    sony_laptop 35224 0
    psmouse 60404 0
    snd_timer 25344 2 snd_seq,snd_pcm
    uhci_hcd 27056 0
    ehci_hcd 40668 0
    i2c_i801 11632 0
    acpi_cpufreq 10272 0
    led_class 5112 2 sdhci,iwlcore
    battery 14072 0
    ieee1394 98880 1 ohci1394
    rfkill 13108 5 iwlcore,sony_laptop
    thermal 17712 0
    video 24268 1 i915
    output 3792 1 video
    serio_raw 7188 0
    snd 76744 15 snd_hda_codec_realtek,snd_seq_oss,snd_hda_intel,snd_hda_codec,snd_seq,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
    soundcore 8576 1 snd
    snd_page_alloc 10784 2 snd_hda_intel,snd_pcm
    cfg80211 78120 3 iwlagn,iwlcore,mac80211
    pcspkr 3088 0
    intel_agp 33104 1
    usbcore 179376 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
    i2c_core 26816 4 i915,drm,i2c_algo_bit,i2c_i801
    ac 5720 0
    sky2 56820 0
    button 7216 0
    sg 33824 0
    freq_table 4528 2 cpufreq_ondemand,acpi_cpufreq
    iTCO_wdt 13648 0
    iTCO_vendor_support 3828 1 iTCO_wdt
    evdev 12928 14
    processor 42064 3 acpi_cpufreq
    rtc_cmos 13592 0
    rtc_core 22212 1 rtc_cmos
    rtc_lib 3120 1 rtc_core
    ext4 256304 2
    mbcache 8980 1 ext4
    jbd2 69088 1 ext4
    crc16 2096 1 ext4
    sr_mod 19460 0
    sd_mod 30696 4
    cdrom 41288 1 sr_mod
    ahci 40992 3
    libata 192460 1 ahci
    scsi_mod 131736 4 sg,sr_mod,sd_mod,libata
    total used free shared buffers cached
    Mem: 3907796 1913868 1993928 0 65068 1566872
    -/+ buffers/cache: 281928 3625868
    Swap: 2441872 0 2441872
    success.
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/55wicd suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
    /etc/pm/sleep.d/99laptop-mode suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
    success.
    Thu Aug 13 22:39:50 UYT 2009: performing suspend
    Thu Aug 13 22:40:10 UYT 2009: Awake.
    Thu Aug 13 22:40:10 UYT 2009: Running hooks for resume
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    /etc/pm/sleep.d/99laptop-mode resume suspend: success.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
    /usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
    /usr/lib/pm-utils/sleep.d/55wicd resume suspend: success.
    /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
    /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    /usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
    Thu Aug 13 22:40:13 UYT 2009: Finished.
    Please ask me for more info if needed.

    I had this issue for almost a year with my Sony CS190. After a clean install, it still exists. So,
    After suspending the keyboard doesn't work, and unbinding/binding i8042 only helps touchpad, not keyboard.
    EDIT: PS: Keyboard & Touchpad work fine after hibernate.
    cat /var/log/Xorg.0.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686
    Build Date: 04 September 2009 03:37:03PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 4 11:01:41 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section. Using the first Screen section.
    (**) |-->Screen "Default Screen" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) Option "DontZap" "false"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0xec0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:2a42:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000060f0/8
    (--) PCI: (0:0:2:1) 8086:2a43:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd3400000/1048576
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 2.8.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "DRI" "false"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
    (--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
    (II) intel(0): Output VGA1 using monitor section Monitor0
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1280x800
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (**) intel(0): Kernel mode setting active, disabling FBC.
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): No memory allocations
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (**) Option "dpms" "true"
    (**) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: Disabled
    (WW) intel(0): Option "AccelMethod" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    (II) AIGLX: Screen 0 is not DRI capable
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) intel(0): Setting screen physical size to 338 x 211
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) config/hal: Adding input device Sony Vaio Keys
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Sony Vaio Keys: always reports core events
    (**) Sony Vaio Keys: Device: "/dev/input/event10"
    (II) Sony Vaio Keys: Found keys
    (II) Sony Vaio Keys: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event5"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
    (II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
    (II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
    (II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
    (**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
    (II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event3"
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device UVC Camera (05ca:183f)
    (**) UVC Camera (05ca:183f): always reports core events
    (**) UVC Camera (05ca:183f): Device: "/dev/input/event2"
    (II) UVC Camera (05ca:183f): Found keys
    (II) UVC Camera (05ca:183f): Configuring as keyboard
    (II) XINPUT: Adding extended input device "UVC Camera (05ca:183f)" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event8"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event13"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event7"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) PS/2 Generic Mouse: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) PS/2 Generic Mouse: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) intel(0): Allocate new frame buffer 1024x768 stride 1024
    (II) intel(0): Allocate new frame buffer 2960x1050 stride 3072
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) PS/2 Generic Mouse: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) config/hal: removing device AT Translated Set 2 keyboard
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) intel(0): Allocate new frame buffer 2960x800 stride 3072
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) intel(0): Allocate new frame buffer 2960x800 stride 3072
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device SynPS/2 Synaptics TouchPad
    (II) UnloadModule: "synaptics"
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: removing device Sony Vaio Keys
    (II) Sony Vaio Keys: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: Adding input device Sony Vaio Keys
    (**) Sony Vaio Keys: always reports core events
    (**) Sony Vaio Keys: Device: "/dev/input/event10"
    (II) Sony Vaio Keys: Found keys
    (II) Sony Vaio Keys: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device SynPS/2 Synaptics TouchPad
    (II) UnloadModule: "synaptics"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device AT Raw Set 2 keyboard
    (**) AT Raw Set 2 keyboard: always reports core events
    (**) AT Raw Set 2 keyboard: Device: "/dev/input/event12"
    (II) AT Raw Set 2 keyboard: Found keys
    (II) AT Raw Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Raw Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: removing device AT Raw Set 2 keyboard
    (II) AT Raw Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device SynPS/2 Synaptics TouchPad
    (II) UnloadModule: "synaptics"
    (II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
    (II) Logitech VoIP USB Dual RF Receiver: Close
    (II) UnloadModule: "evdev"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
    (II) Logitech VoIP USB Dual RF Receiver: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event3"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event5"
    (II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
    (II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
    (II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
    (**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
    (II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
    cat /var/log/kernel.log
    Oct 4 13:33:04 ArchTiger kernel: PM: Syncing filesystems ... done.
    Oct 4 13:33:04 ArchTiger kernel: Freezing user space processes ... (elapsed 0.00 seconds) done.
    Oct 4 13:33:04 ArchTiger kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    Oct 4 13:33:04 ArchTiger kernel: Suspending console(s) (use no_console_suspend to debug)
    Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Stopping disk
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B disabled
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Oct 4 13:33:04 ArchTiger kernel: ACPI: Preparing to enter system sleep state S3
    Oct 4 13:33:04 ArchTiger kernel: Disabling non-boot CPUs ...
    Oct 4 13:33:04 ArchTiger kernel: CPU 1 is now offline
    Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to UP code
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: CPU1 is down
    Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
    Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#0.
    Oct 4 13:33:04 ArchTiger kernel: Back to C!
    Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
    Oct 4 13:33:04 ArchTiger kernel: Enabling non-boot CPUs ...
    Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to SMP code
    Oct 4 13:33:04 ArchTiger kernel: Booting processor 1 APIC 0x1 ip 0x6000
    Oct 4 13:33:04 ArchTiger kernel: Initializing CPU#1
    Oct 4 13:33:04 ArchTiger kernel: Calibrating delay using timer specific routine.. 5059.62 BogoMIPS (lpj=8429792)
    Oct 4 13:33:04 ArchTiger kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
    Oct 4 13:33:04 ArchTiger kernel: CPU: L2 cache: 6144K
    Oct 4 13:33:04 ArchTiger kernel: CPU: Physical Processor ID: 0
    Oct 4 13:33:04 ArchTiger kernel: CPU: Processor Core ID: 1
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#1.
    Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    Oct 4 13:33:04 ArchTiger kernel: CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: Switched to high resolution mode on CPU 1
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching sched-domain:
    Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:04 ArchTiger kernel: groups: 0 1
    Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching sched-domain:
    Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:04 ArchTiger kernel: groups: 1 0
    Oct 4 13:33:04 ArchTiger kernel: CPU1 is up
    Oct 4 13:33:04 ArchTiger kernel: ACPI: Waking up from system sleep state S3
    Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
    Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd670d570)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x5040)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x3ff)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0x30300)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xd450d360)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x50400)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xd350d350)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
    Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x4001)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd5700004)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd4600004)
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
    Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xd3500900)
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x4 (was 0x0, writing 0xd3500800)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
    Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:02.1: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb3: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb4: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb5: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb6: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb7: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: Radio Frequency Kill Switch is On:
    Oct 4 13:33:04 ArchTiger kernel: Kill switch must be turned off for wireless networking to work.
    Oct 4 13:33:04 ArchTiger kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d3500000-d35007ff] Max Packet=[2048] IR/IT contexts=[4/4]
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Starting disk
    Oct 4 13:33:04 ArchTiger kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:04 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 4 13:33:04 ArchTiger kernel: ata1.00: configured for UDMA/133
    Oct 4 13:33:04 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
    Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1 failed to resume: error -19
    Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
    Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.1 failed to resume: error -19
    Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
    Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.2 failed to resume: error -19
    Oct 4 13:33:04 ArchTiger kernel: Restarting tasks ... <6>usb 5-1: USB disconnect, address 2
    Oct 4 13:33:04 ArchTiger kernel: usb 5-1.1: USB disconnect, address 3
    Oct 4 13:33:04 ArchTiger kernel: done.
    Oct 4 13:33:04 ArchTiger kernel: usb 5-1.2: USB disconnect, address 4
    Oct 4 13:33:05 ArchTiger kernel: i8042.c: Detected active multiplexing controller, rev 1.1.
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: sky2 eth0: enabling interface
    Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Oct 4 13:33:05 ArchTiger kernel: iwlagn 0000:03:00.0: Radio disabled by HW RF Kill switch
    Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Oct 4 13:33:05 ArchTiger kernel: wlan0: Failed to config new BSSID to the low-level driver
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 1
    Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching NULL sched-domain.
    Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching sched-domain:
    Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:05 ArchTiger kernel: groups: 0 1
    Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching sched-domain:
    Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:05 ArchTiger kernel: groups: 1 0
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 2
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 3
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 timed out
    Oct 4 13:33:06 ArchTiger kernel: psmouse serio22: ID: 10 00 64
    Oct 4 13:33:06 ArchTiger kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
    Oct 4 13:33:06 ArchTiger kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    Oct 4 13:33:07 ArchTiger kernel: input: PS/2 Generic Mouse as /devices/platform/i8042/serio22/input/input23
    Oct 4 13:33:07 ArchTiger kernel: Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
    Oct 4 13:33:07 ArchTiger kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio24/input/input24
    Oct 4 13:33:08 ArchTiger kernel: ata2.00: qc timeout (cmd 0xef)
    Oct 4 13:33:08 ArchTiger kernel: ata2.00: failed to set xfermode (err_mask=0x4)
    Oct 4 13:33:09 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:09 ArchTiger kernel: ata2.00: configured for UDMA/33
    Oct 4 13:33:09 ArchTiger kernel: ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x18 t4
    Oct 4 13:33:09 ArchTiger kernel: ata2: irq_stat 0x40000001
    Oct 4 13:33:09 ArchTiger kernel: ata2: EH complete
    Oct 4 13:33:10 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
    Oct 4 13:33:17 ArchTiger kernel: eth0: no IPv6 routers present
    Oct 4 13:33:29 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away.
    Oct 4 13:33:30 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
    Oct 4 13:33:32 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
    Oct 4 13:34:04 ArchTiger kernel: usb 5-1: new full speed USB device using uhci_hcd and address 5
    Oct 4 13:34:04 ArchTiger kernel: usb 5-1: configuration #1 chosen from 1 choice
    Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: USB hub found
    Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: 2 ports detected
    Oct 4 13:34:04 ArchTiger kernel: usb 5-1.1: new full speed USB device using uhci_hcd and address 6
    Oct 4 13:34:05 ArchTiger kernel: usb 5-1.1: configuration #1 chosen from 1 choice
    Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input25
    Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input0
    Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input26
    Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input1
    Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: new full speed USB device using uhci_hcd and address 7
    Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: configuration #1 chosen from 1 choice
    cat /var/log/pm-suspend.log
    Initial commandline parameters:
    Sun Oct 4 13:34:08 EDT 2009: Running hooks for suspend.
    /usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
    success.
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686 Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz GenuineIntel GNU/Linux
    Module Size Used by
    sony_laptop 29520 0
    vboxdrv 134376 0
    ipv6 277876 14
    fuse 60896 2
    fan 4392 0
    msr 3240 0
    cpufreq_ondemand 7672 2
    acpi_cpufreq 8624 0
    freq_table 3716 2 cpufreq_ondemand,acpi_cpufreq
    snd_seq_dummy 2696 0
    snd_seq_oss 31168 0
    snd_seq_midi_event 7012 1 snd_seq_oss
    snd_seq 53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    arc4 1732 2
    ecb 2788 2
    iwlagn 95208 0
    sdhci_pci 7300 0
    sdhci 17128 1 sdhci_pci
    iwlcore 96132 1 iwlagn
    mac80211 182976 2 iwlagn,iwlcore
    snd_pcm_oss 40352 0
    ohci1394 30196 0
    mmc_core 52704 1 sdhci
    snd_mixer_oss 17540 1 snd_pcm_oss
    led_class 3976 2 sdhci,iwlcore
    ieee1394 85324 1 ohci1394
    battery 10984 0
    ac 4360 0
    cfg80211 67364 3 iwlagn,iwlcore,mac80211
    rfkill 10640 5 sony_laptop,iwlcore
    thermal 13888 0
    button 5556 0
    snd_hda_codec_realtek 206568 1
    snd_usb_audio 86304 3
    snd_usb_lib 17252 1 snd_usb_audio
    snd_rawmidi 21856 1 snd_usb_lib
    snd_seq_device 6768 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
    i915 184872 2
    processor 35864 3 acpi_cpufreq
    joydev 10400 0
    drm 154656 2 i915
    snd_hda_intel 26664 2
    snd_hda_codec 71716 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 7656 2 snd_usb_audio,snd_hda_codec
    snd_pcm 73512 6 snd_pcm_oss,snd_usb_audio,snd_hda_intel,snd_hda_codec
    snd_timer 21100 2 snd_seq,snd_pcm
    snd 58436 21 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_usb_audio,snd_rawmidi,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    snd_page_alloc 8876 2 snd_hda_intel,snd_pcm
    usbhid 40608 0
    hid 42496 1 usbhid
    i2c_algo_bit 5864 1 i915
    uvcvideo 61040 0
    videodev 36544 1 uvcvideo
    v4l1_compat 15688 2 uvcvideo,videodev
    video 19832 1 i915
    btusb 12632 0
    bluetooth 56676 1 btusb
    output 2884 1 video
    psmouse 59644 0
    i2c_i801 9656 0
    i2c_core 22776 4 i915,drm,i2c_algo_bit,i2c_i801
    intel_agp 27484 1
    agpgart 32756 2 drm,intel_agp
    sg 27928 0
    iTCO_wdt 10952 0
    iTCO_vendor_support 3080 1 iTCO_wdt
    serio_raw 5704 0
    bridge 54008 0
    sky2 47240 0
    evdev 10176 19
    stp 2088 1 bridge
    llc 5552 2 bridge,stp
    tun 13572 0
    soundcore 6784 1 snd
    rtc_cmos 11212 0
    rtc_core 18048 1 rtc_cmos
    rtc_lib 2500 1 rtc_core
    ext3 134380 3
    jbd 48504 1 ext3
    mbcache 7080 1 ext3
    sr_mod 16612 0
    cdrom 36032 1 sr_mod
    sd_mod 27328 5
    uhci_hcd 23540 0
    ehci_hcd 36112 0
    usbcore 150160 8 snd_usb_audio,snd_usb_lib,usbhid,uvcvideo,btusb,uhci_hcd,ehci_hcd
    ahci 34004 4
    libata 168044 1 ahci
    scsi_mod 110708 4 sg,sr_mod,sd_mod,libata
    total used free shared buffers cached
    Mem: 2980024 2880848 99176 0 108764 2400148
    -/+ buffers/cache: 371936 2608088
    Swap: 1052216 0 1052216
    success.
    Let me know, if you need any other output.
    Thanks
    Last edited by Sir_Leon (2009-10-04 17:56:47)

  • F# keys on Apple Wireless Keyboard not working correctly.

    Hello everyone,
    Today I bought a brand new Apple Wireless Keyboard (the small ones who resemble laptop keyboards), which I'm very glad I bought as some keys on my older keyboard started not working anymore.
    I configured the keyboard with bluetooth and it's working just fine, except for one thing:
    The F# keys don't work as their respective icons indicate (i.e. If I press F10, F11 and/or F12, the volume isn't affected as it normally should, but instead the keys don't seem to respond, as if I weren't pressing them).
    In the Keyboard & Mouse panel in System Preferences, under the Keyboard Shortcuts, I managed to reset the F1 to F4 keys so they work as their respective icons indicate, though I didn't find and don't know how to create any shortcuts to make the volume keys (F10, F11 & F12) work again.
    Also, I would appreciate if you could help me out to reset the F7, F8 & F9 keys, which don't work either.
    I tried checking and un-checking the "Use the keys F1, F2 and so on, as standard function keys." option under the Keyboard tab, and pressing the "fn" key while pressing the F# keys, but none of those attempts seem to change anything to how the F# keys work.
    I don't know what else to do anymore and I would really appreciate some help now.
    Thanks in advance for your responses,
    Oscar.

    Shutdown your macbook.After thats done , switch the wireless keyboard off. Press Shift + Ctrl + Option  + Power Key (all together ) and then release together. Start up the macbook and once that's up start up the keyboard.Try now.The keys should work fine.

  • Wireless keyboard not connecting

    My wireless keyboard has suddenly stopped working, I've changed the batteries and it continues to not be discoverable via bluetooth.  How do I reconnect it?

    Open Bluetooth Setup Assistant and while that's searching for Devices turn the keyboard off and on (repeat) to re-pair it.

Maybe you are looking for

  • Xy graph in excel using activeX

    Hi I am trying to plot a XY graph in excel using Active X. I have two coloums of data one should be X the other should be Y. I am using XlXYscattersmooth graph type and giving the range as A1 to B5. But when the excel plots it, I am getting two serie

  • How do I add a code snippet to all topics in project?

    I have some java code that I need to add within the header of every topic in my help project. Is there an easy way to do this instead of individually adding topic by topic?

  • Error while import development configuration

    I can't import development configuration in NWDS from file. After upload xml file, config-dialog ask me to auth into NWDI. I enter my login/pass and recieve strange status: DTR auth me well, but CBS can't auth me at all!! Any ideas?

  • HT201812 I have thousands of duplicates. "Show Duplicates" does half the work. Help.

    I recently consolidated a couple incomplete backups into a brand new iTunes library on my Macbook Air. Despite needing to load both collections to cover all my music, there are thousands of duplicate song files in iTunes. I can use "Show Duplicates"

  • Can't Complete Distribution License

    I am trying to renew my distribution license for Flash Player and Reader and have tried to complete the online form at https://www.adobe.com/cfusion/mmform/index.cfm?name=distribution_form&pv=fp several times but the Accept and Submit button remains