Wireless Keyboard (original apple KB) and current bluetooth pairing

I have an Apple original wireless keyboard and when I try and pair it with a MacBook Pro with Bluetooth software update 2.3.3-f8 the MBP can see the keyboard but can not pair with it. I know the Keyboard is old but is there a way to get it to work with my current MBP running OS 10.6.4. For what its worth, the wireless mouse of the same vintage does work.

Yes you can have multiple Bluetooth devices connected simultaneously. I believe you have have up to 7 BT devices at one time.
Also you may find http://www.apple.com/support/bluetooth/ helpful.
Roger

Similar Messages

  • When I try to connect my bluetooth keyboard to my ipad, the dialog box pops up and says: "Make sure 'Apple Wireless Keyboard' is turned on and in range." But the keyboard is turned on and is right in front of the ipad. Any thoughts?

    When I try to cnnect my bluetooth keyboard to my ipad, the dialogue box pops up and says: "Make sure 'Apple Wireless Keyboard' is turned on and in range." The thing is, the keyboard is on and is sitting in front of the ipad. I have used it before, but not for many months. I changed the batteries today just in case. The green light on the keyboard comes on and continues blinking. What am I missing?

    Keyboards Can only be paired with one device at the time so if it's paired with another device IN range it Will not pair with the ipad

  • Can i link my wireless keyboard to Apple TV?

    How do I link my wireless keyboard to Apple TV? Search is otherwise so tedious.

    If you have a bluetooth keyboard you might be in luck at some stage - Google a few relevant terms or:
    http://bit.ly/122kg6C
    AC

  • Trying to set up wireless keyboard to apple tv

    How do I pair wireless keyboard to Apple TV?

    The following article(s) may help you.
    Using a Bluetooth Keyboard

  • Connect Wireless Keyboard to Apple TV?

    Hi,
    how do i connect a wireless keyboard to apple tv so i can avoid the remote when doing searches?
    Thanks
    LP

    only bluetooth keyboards works
    http://support.apple.com/kb/HT5633

  • I have a wireless keyboard for my ipad and it says to charge it connect it to my pc.  can i charge it by connecting it to my ipad?

    I have a wireless keyboard for my ipad and it says to charge it connect it to my pc.  can i charge it by connecting it to my ipad?

    No. The iPad's port won't put out enough power. You could probably plug your keyboard into your iPad charger and charge it that way, but it won't charge off the iPad.

  • HT5633 Wireless keyboard with Apple TV Box

    I had connect wireless keyboard with Apple TV Box it is work perfectly with English language but Thai language I need to hold the key until it appear then press Enter to type a letter it is look really trouble at all. Please give me any suggestions, Thank you.

    Birthbd wrote:
    the problem will be apple tv box firmware not fully support wireless keyboard. Will need update.
    I think it does fully support wireless keyboard, but only for English.  As Apple tells you in the link I gave you earlier:  "Apple TV uses the U.S. English keyboard layout regardless of the keyboard's hardware layout"
    Hopefully they will fix it in the future.

  • Can i retrieve my Original apple id and pass without any informations?

    Can i retrieve my Original apple id and pass without any informations?

    Do you at least remember what your old Apple id username is? Is it just the password you have forgotten?
    Frequently asked questions about Apple ID
    If you forgot your Apple ID password

  • Connecting remotely with Apple wireless keyboard, ARD 3.5, and Lion

    I don't know if the keyboard issue is related but here is my problem:
    1. I have used Vine Server with .NET VNC viewer for years and iTeleport for close to a year to remote to my iMac. Vine Server stopped working after I upgraded to Lion so I bought Apple Remote Desktop 3.5 and installed it.
    2. I can connect once, but after I disconnect, I can no longer connect using iTeleport; instead, it tries for a long time then gives a timeout error. After I restart the Mac then I can reconnect, but only if I restart from the login screen or the Apple menu; if I use either "sudo reboot", or "sudo shutdown -r now", then I still cannot reconnect. I cannot test this behavior using .NET VNC viewer because it is a 30 minute drive away.
    3. When I try to connect using .NET VNC, I get an error that the server is not a VNC server; however, I have never managed to attempt to connect at a time when I could connect using iTeleport.
    4. When I connect using iTeleport where I can see my Mac, the Mac dispays the message that it cannot find a bluetooth keyboard. This message does not appear on my iPad screen, but it does display on the Mac's monitor any time I attempt to connect using iTeleport whether or not the connection is successful.
    5. The behavior is the same whether I connect through the local wifi or over the internet.
    6. I have never been able to connect using the iTeleport connect utility that comes with iTeleport.
    Right now, I would be happy if there were a special restart command that I could execute over ssh that does the same thing as clicking the restart button on the Mac. Does anybody have an Idea how I can get this working again? Driving home to reboot every time I need to remote in is not an option.

    Thanks for the quick reply Skydiver! So...I really should buy a second wireless keyboard so that I don't have to go through the hassle of re-pairing the keyboard when i switch devices, yes? Yes, I believe I've answered my own question as I now sit here with my MBP attempting to pair it to the keyboard. Oy. Taking forever. I don't mind buying a second -- for $69, it seems to be the most efficient thing to do. Now I just need to figure out a way to designate which wireless keyboard goes with which device. Time to buy a little sticker! Thanks again.

  • Wireless keyboard (non apple) + usb receiver = wake from sleep?

    Does a non apple wireless keyboard with its own usb receiver wake the computer from sleep? if so any other issues / concerns when using one?

    With regard to the USB port, I have always had my keyboard plugged directly into an original USB1.1 port. I save the USB2.0 ports (PCI Card) for scanner, hard disks, etc that would actually benefit from the speed increase. I do know that the buttons on my scanner (for instant scan/copy etc) work perfectly if the computer is awake, but will not wake the computer from sleep.
    With regard to programming the other keys, my microsoft keyboard has a preference pane that allows you to define different functions for all the keys. This came on a cd with the keyboard, but only windows version. Had to download the mac version from microsoft.com website.
    I've never tried a bluetooth keyboard. Perhaps with next computer purchase.
    When I was shopping for a keyboard - the one thing that pushed me to the microsoft keyboard was greater flexibility in defining functions for the keys. For instance, The play, fast forward, rewind, volume keys always access itunes regardless of what program is running, except for imovie, where they instead control playback. If I hold down the shift key and push them in imovie, then they again control itunes. Similarly, I set the "my favorites" keys to link to certain websites in safari, certain albums in iphoto, certain playlists in itunes, and certain folders in the finder or otherwise. This control was more robust at the time (5 years ago) and still functions well for me. Not sure if other manufacturers have this now or not.

  • My wireless keyboard has come unpaired and I can't log in to my iMac to pair it...help!!

    Help...my wireless keyboard has some how come unpaired with my iMac...and since the keyboard does not work I can not log in to repair it.  Anyone know how to fix this??

    You can access your Mac from your iPhone or iPad through a remote desktop client like Splashtop or LogMeIn if you already have something like this installed. Are you sure that your keyboard is 'discoverable'? (Hold button until light comes on and then goes off. Release button, then depress agin. The light will come on, hold for for about 3 seconds then let go. The light on the keyboard should be blinking in a 3 flash succession.) If it doesn't connect to the Mac after this, you'll need to get/borrow/buy a USB Keyboard (It's always good to have one of these handy anyway when you have a wireless accessory setup as your main way of connecting with your Mac).  
    Once you do get in to your system, be sure and go to System Preferences>Bluetooth and make sure that the 'Discoverable' box is checked. Also, go on to the Advanced pane and make sure that the box that says "Open Bluetooth Setup Assistant at startup if no trackpad or mouse is detected" is Checked.
    Results?

  • Using wireless keyboard with Apple TV

    So why don't they make things easy and somehow add a firmware upgrade that allows you to use your wireless keyboard when making searches on the Apple TV. Every new owner of an iMac has one! This would be a great improvement over the hunt and pick that the remote gives you. Even Sony's playstation 3 has a remote keypad available as an option.

    as others have said.. if you have an iPod Touch, iPad, iPhone you can use the remote app to type text fort the appleTV in a tiny package... and navigate your appleTV (don't have to use the remote at all) and surf the net and check email, twitter etc, etc without annoying everyone else in the house that just wants to watch the movie or TV show... and if you want to share something with someone on the big screen you can use airplay to transfer the video to the big screen.. next iOS update adds API for developers of 3rd party apps to add the ability to show video or audio on the big screen.. this direction seems to make WAY more sense to me than the google direction that seems to serve to mainly annoy your family..

  • Wireless keyboard for Palm TX and Adobe reader update?

    I am considering purchasing a wireless keyboard for a Palm TX. Will the 3169WW work? If purchased new, what driver will it come with ( what driver do I need?). How universal is this keyboard? I have Adobe Reader 3.05 on the TX. Should I be looking for a newer version. Thank You!
    Post relates to: Palm TX

    I just deployed a "new (!) TX and the Palm Bluetooth Keyboard, after years of using the Tungsten T3.  For the most part I'm happy with both.  There's just a little downside to the keyboard, that is, the lack of a key combination to duplicate the Graffiti stroke that involkes shortcuts (these are the mostly custom texts that you set up in Prefs to insert by making the stroke followed by just one or two or three characters).  On the Ultrathin Keyboard, which I used with the T3, the fn-ctrl combination made the shortcut stroke on the screen, after which I could type (for example) "dts," which would insert a date and time stamp.  I think the Palm infrared wireless keyboard does the same thing.  If there is such a functionality on the BT keyboard, it's not documented and I cannot find it.  (I suspect that it may have been left out because it may be mostly used with smartphones, Treo series etc., which have the hardware keyboards and so dispense with Graffiti, but I use the Graffiti shortcuts a lot, so this omission makes me a somewhat unhappy camper.  If anyone has discovered a way to invoke this function on the BT keyboard, I would be very interested.)

  • Sharing Wireless Keyboard Between OS X and Linux

    So I just got an Apple wireless keyboard for use with my Mac mini which dual-boots OS X and Linux.  While it works in both, I have to re-pair it each time I switch OSes because essentially to the keyboard it's like two different computers. And while Ive read some people have been able to get the keyboard to work between multiple computers, I don't seem to be having much luck...

    I believe TrueCrypt can do what you want.

  • Wireless Keyboard is not working and I cannot boot to MAC using Boot Camp

    Hi,
    I cannot get my wireless keyboard to connect to the Mac anymore. I have a 17" iMac that is running Boot Camp. since the Mac keyboard is not working I am using a PC USB keyboard (which does not have an "option" key) without the Option key I cannot enter Mac mode, so I only get the default boot to XP... HELP!!! Is there any other way to get into Mac mode without using the option key on the keyboard? Or is there another key on the PC keyboard that maps to Option?
    Thanks

    I wrote up my travails getting the wireless keyboard working, maybe it will help: http://industriousone.com/apple-wireless-keyboard-vs-windows-xp. Otherwise, you can boot into OSX by clicking on the Boot Camp icon in the system tray (looks like a gray diamond) and choose "Reboot in OS X mode" (or something like that, working from memory). In OS X, you can reboot into Boot Camp by going to System Preferences > Startup Disk and choosing Windows. Hope that helps!

Maybe you are looking for

  • Unable to create an internet shortcut (simple process, but doesn't work)

    There really aren't any details. The process just doesn't work & research suggests that it may well be browser related.

  • Precompiling a JSP that uses a bean

    Hi,           I am facing a problem when I startup Weblogic with precompiling ON.           I have a JSP that uses a bean. When the JSP is being compiled, Weblogic is           actually trying to instantiate the bean and is executing code in the     

  • Narrowing search in iTunes music library

    Hi All...I'm using iTunes 7.0.1 on a MacBook Pro and wondering if there is a way to narrow the search criteria in the music library. For example, searching for a song title "Love," and wanting to see songs with only that word as the title, not songs

  • Display logo using report program

    Hi Experts,    In report programming how can i display the logo on selection-screen and also at output screen near header area. Thanks in advance, aadi.

  • Update Not Registering

    Has anyone else run into these two strange issues? 1. Software Update keeps telling me that Digital Camera RAW Compatibility Update 4.09 needs to be done, which I did do. However, it still shows as a new update even though Updates Installed in the La