Wireless keyboard wont connect to Macbook Pro...

Hello everyone, I've found myself in a little bit of a situation today. I have an early 2011 Macbook Pro, the keyboard does not work due to water damage, and i've been using a wireless keyboard for a while now. I had to restart my laptop for an update and when the laptop turned on the wireless keyboard would not connect to the bluetooth, which now means I can no longer sign in my account.
is there a way i can fix this problem?

Iphone/ipad supportes bluetooth for stereo speakers/headsets, handsfree telephone devices/headsets, some keyboards, some peer to peer apps, and internet tethering if provided by the carrier.
Otehr than these it will not connect to a phone/computer/device

Similar Messages

Wireless keyboard A1016 and new MacBook Pro

I have searched but can't find whether my old Apple wireless keyboard (white case) is compatible with my new MacBook Pro. My computer finds the keyboard but then asks for a passcode and it doesn't connect. Maybe I need a firmware update??

{quote}Thank you for your help.{quote}
No problem. I love my white plastic Bluetooth keyboard with the NUMERIC KEYPAD! I plan on using until I die or Apple offers another Bluetooth keyboard with the numeric keypad. I'm sure there are lots of others that feel the same way.

A1255 Wireless keyboard not pairing with macbook pro 10.6.5

Trying to pair my wireless keyboard with macbook pro but it's not pairing.
What i did is :
System Preference -> Keyboard -> set up bluetooth wirless keyboard
my keyboard appears for a moment and the i goes off.
it says 1 keyboard found then keep searching and suddenly no keyboard found.
Any help is appreciated.
Cheers

Hello H:
These forums are not chat rooms, but since you used my name I will address your post.
Do you work for Apple?
No. These are user-to-user forums. The forums are moderated by Apple, but do not represent official responses from the company. If an Apple employee would post here (very rare), they would have either a purple apple (forum host) or a silver apple (employee) under their name.
Every post about this issue, going back to early 2009 you have made the SAME suggestion. It doesn't work.
That statement is inaccurate. If you read the posts carefully, I do not cut/paste the same suggestion to address issues. However, trying to address issues without hands-on access to devices necessarily requires one to suggest solutions that have worked in similar situations. Bluetooth issues are not rocket science and there are only a few things that are available to resolve problems. If you look at the little blue bars next to my name that represent user +"thank yous+" for suggestions that worked, I must have made a few suggestions that did work.
Like everyone else that tries to help others here, we are unpaid volunteers. If you have better sources to obtain information, I certainly recommend that you seek those sources out. If you have issues with Apple, take them up with the company. Ranting here about your particular problem is not helping anyone.
Barry

Wireless keyboard initially works with macbook pro, but then freaks out!

i just started using a wireless keyboard and wireless mouse with my 2-year old macbook pro, and while it all initially pairs up and works fine, after about 10 minutes weird things start happening.....like the tilda button seems to suddenly get stuck and repeats itself until i push it down, or my browser windows starts jumping to fill the screen. it still keeps working, but the freaking out on my screen gets worse.
i first unpaired first the keyboard and then the mouse to see which was causing the problem, and it seems to be the keyboard that's the culprit. the battery level seems to be fine, and as i said it seems to be paired correctly when i double check it under bluetooth in sys pref. also checked the keyboard viewer in sys pref and that seems to be working ok. i've done some searching on apple support and in discussions but can't find any similar situation. (also couldn't find a discussions category for keyboard, or would have posted this there)
i would greatly appreciate anyone's thoughts/suggestions on this!

I am having a similar problem with the wireless keyboard. Initially it will work, but then I'll come home and my computer speakers will be beeping because the wireless keyboard is trying to type something from across the room. Additionally, when I try to use my regular onboard keyboard when this happens, its impossible because the wireless keyboard is constantly typing something. My only way around this is to turn off wireless keyboard and only turn it on when I need it. Please post back with your results. Any ideas of how I can fix this?

DLink router wont connect with MacBook Pro

Hello Everyone... I need a little bit of help on this one!!
My mom just bought a brand new MacBook Pro (yay, she finally switched!) , but for some reason I can not get her MBP to connect to their wireless. The Airport card will no even find the network to connect to. There is not a password set and asking my parents they are not sure if there was a cd or anything to set it up. They have a DLink router that is several years old (DI-624 is the model #) and I have been scratching my brain to figure this out and can not get it!! There are several posts that give suggestions, but none seem relevant to my problem.
Any help would be awesome and thank you sooo much for your help!!

assuming your mum's previous computer was/still is able to connect to the DLink, it probably means that SSID Broadcast in the wifi settings (of the DLInk) has been turned off. which means nothing can 'see' the DLink that hasn't connected to it previously.
you'll need to temporarily plug the MBP into the DLink via a Cat5 Ethernet cable, log into the DLink's config website (probably http://192.168.0.1 or http://192.168.1.1), and check the wifi settings. no install CD required
u said no 'password' had been set. do you mean no wifi encryption had been configured? you'd be well advised to if there's anyone living within 100m of your Mum . while you're at it, see what encryption settings have been set up there / are available. if it's WEP (or no encryption at all as you suggest?), you'd be well advised to change it to WPA. WEP is now hopelessly broken (easily crackable within a minute with the right tools). just be aware that any change here will affect any other wireless device that's also using the DLink.
if WPA is not offered, goto the DLink website and check for new firmware...

Internet wont connect on macbook pro

Laptop wont connect to internet even though wireless modem network settings and menu bar shows connected OK. It worked perfectly 3 months ago but I havent used the laptop since.

FaceTime, Game Center, Messages: Troubleshooting sign in issues

Nike + wont connect to Macbook pro

I recently updated my macbook pro to the mountain lion and when I connected my nike fuel band; the nike connect shows in the dock and disappears. I have uninstalled and have gone thru all of the trouble shooting with Nike. We tried to connect on an older version (e.g. lion) of mac (using another computer) and it worked. However, after updating that macbook it no longer recognized it as well.

I think the only reason you would require a Bluetooth connection between an iPhone and MacBook Pro is to tether the phone to the laptop. And tethering isn't allowed with the iPhone on the AT&T network, so this is kind of irrelevant.
And I don't think Apple is to blame, so the OP is way off base on this one.

IMessage wont connect on Macbook Pro

Need help! I am trying to set up iMessage on my Macbook Pro - i enter the correct Apple ID & Password and it comes up with a error message 'Could not sign in, Please check network settings & try again'
Help Please!!
Thanks

FaceTime, Game Center, Messages: Troubleshooting sign in issues

Bluetooth keyboard connected to MacBook Pro but not typing

Just bought the new MacBook Pro and love it. I've got my bluetooth wireless trackpad connected and working fine. Unfortunately, my bluetooth wireless keyboard is connecting, but not typing. How can I troubleshoot this?

Okay, I've had the wireless keyboard disconnected from the old computer. Now my current computer says the keyboard is 'connected' under the bluetooth drop down menu, however will not type and when I got into System Preferences>Keyboard and choose Set Up Bluetooth Keyboard it says No Keyboard Found, even though the little green light on the keyboard is flashing. Any idea how to troubleshoot this and get the keyboard working?

I am battling to connect my MacBook Pro to my new Samsung D7000 Smart tv. Both the tv and the macbook are on the same wireless network. Any ideas on how to solve this problem?

How do I connect my macbook pro to my samsung smart tv its the D7000 and has all share?

My suggestion is to get the magic trackpad, magic keyboard and magic wand and connect a DVI to HDMI cable and use the MBP in clamshell (closed) mode. This will allow you to run 1080P into the TV and essentially use the Samsung as a HUGE monitor. At that point you can use the TV itself to display whatever you want off the laptop or simply switch inputs and stream stuff out of smarthub as usual. I tried to connect mine via allshare (by the way samsung has the free allshare download of software for the PC but not the mac.) and while i DID have some succes (under windws) i had to run a non secure connection and in the end the cool factor wasn't worth the hassle, to me anyway. It was sort of a "cool i did it" now why bother..... Hope this helps.

HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

How do i connect my macbook pro to my tv wirelessly?

How do i connect my macbook pro to my tv wirelessly? I have MacBoock Pro 13 inch OS X 10.6.8 and Samsung LED 8000 series

Thanks for your reply.
I am able to print wirelessly through my MacBoock Pro
My TV discover other devices PC etc but not my Mac

Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.

Hi!
Didn't know exactly where to direct this question in the Apple Community so I chose Airport. To everyone, thanks in advance.
I’m really desperate. I’m a big Apple fan. I have two Apple MacBook Pro laptops with Mountain Lion software. I also have an Apple Airport Extreme. My HP Photosmart C4780 printer was also purchased from Apple. Anyway, my Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
This appears to be an HP printer problem. I went to HP community support with the information below but I have received no solutions outside of buying a new printer.
“Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0.”
To be straightforward, I’m no computer tech so I don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve tried everything to reconfigure without success. If I need to make these changes via Airport Extreme Utility 6.0 not easy to find not that I know what I’m doing.
Most importantly if I ever get wireless working again, do I still need Airport Extreme connection or is the AT&T U-Verse modem/router sufficient?
Any direction or help is greatly appreciated. Thank you for listening.

Thank you for your prompt response. I'll be honest I'm a retiree and a newbie to all of this stuff. I don't even know how to do a thread. (Embarassing) This is my first ever contact with the Apple Community so I'm slowly trying to figure this out as well.
As to your thread request, I'm assuming you want to read my post with HP. Not knowing how to thread, I've copied it below.
I have an Apple MacBook Pro laptop with Mountain Lion software. I also have an Apple Airport Extreme. My Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0
To be honest, don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve read your forum and tried everything to reconfigure without success. Any direction or help is greatly appreciated.
Thanks in advance!
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
I finally figured it out! (Sorry that I'm replying to my own posts btw, but I want to post the solution for anybody else with the SigmaplusEOL1 problem). If you have the SigmaplusEOL1 as your SSID when you print the "Wireless Network Test Report", you do NOT need to return it (I know that's hassle for people). To fix the problem, follow these steps.
1) Unplug your printer.
2) Go to your router's IP address (like 192.168.1.1 or whatever it is for your router).
3) Change the SSID of your wirelss network to "SigmaplusEOL1".
4) For the Security option for your wireless network select none (so that a password is not required to access your wireless network).
5) Power your printer back on and reprint "Wireless Network Test Repor". It should say "No problem found..."
6) The report should also have a the IP Address of the printer (under Configuration Summary at the bottom). Type that IP Address in your browser to get to the printer's settings page.
7) Click the "Network" Tab at the top.
8) Under the "Connections" header in the left pane, click "Wireless (802.11).
9) Click "Start Wizard" at the bottom right.
10) In the wizard, change the SSID and encryption (wep or wpsk) password to whatever you want your wireless network to be. So probably whatever it started out as before you changed the SSID to SigmaplusEOL1
11) Click "Finish" at the end. The page will probably try to keep loading but it won't because you changed the network settings of the printer. Just ignore that
12) Go back to your router's IP address and change the SSID and encryption password to whatever you changed the printer's SSID and password to.
13). Reprint the Wireless Network Test Report. It should say the SSID is the same as your wireless, and everything is good.
That's it. You should be good to go now.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Thank you for your prompt response. This has been a totally frustrating experience. I’ve spent at least 8 hours trying to fix this. My HP problems and your initial steps were identical to mine. I am by no means a tech person and my computer tech knowledge is minimal. However I followed your steps to the best of my ability.
I did get the SigmaplusEOL1 message. I was able to get to Step 6 where the wireless network test report now reads – “HP printer settings do not match your wireless router settings.” So I guess this is a step in the right direction. However unfortunately the Configuration summary message for the IP Address reads – “Not Applicable”. (Note: changing SigmaplusEOL1 to network name knocked out my Internet access. Had to switch back to regular network name to regain access.)
I’m at a loss as to what to do next.   Without the IP Address is it possible to move forward? As I stated earlier, I’m not a tech person. As to your steps 7, 8 and 9, I can’t find them on my computer or maybe I’m looking in the wrong places. In System Preferences - Network, I have none of these steps. If you’re referring to Airport Utility, with the changes in Mountain Lion, these steps are no longer there. If you’re talking about Safari, Firefox or HP, now I’m really lost.
Finally, I don’t know if you can answer this or not. If I ever get wireless working, do I still need Airport Extreme or is the AT&T U-Verse modem/router sufficient?
Again thank you for your time and patience.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Unfortunately I am unable to offer any further advice as I only followed the instructions listed on the other page.
Finally, as to having WEP enabled, I don't know. Don't even know where to look. The best that I could determine is that my security is WPA/WPA2 Personal.
I'm truly sorry about all of this. Thank you for your time and patience. After reading all of this and you change your mind, I would understand.

HT3500 how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

Firstly, the HP printer must be connected to the ASUS' network. Then, simply connect your MBP to the network and your printer should be addable in Print & Fax in System Preferences.

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

Wireless keyboard wont connect to Macbook Pro...

Similar Messages

Maybe you are looking for